/* * Framework and drivers for configuring and reading different PHYs * Based on code in sungem_phy.c and gianfar_phy.c * * Author: Andy Fleming * * Copyright (c) 2004 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */ #ifndef __PHY_H #define __PHY_H #include #include #include #include #include #include #include #include #include #include #define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \ SUPPORTED_TP | \ SUPPORTED_MII) #define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \ SUPPORTED_10baseT_Full) #define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \ SUPPORTED_100baseT_Full) #define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \ SUPPORTED_1000baseT_Full) #define PHY_BASIC_FEATURES (PHY_10BT_FEATURES | \ PHY_100BT_FEATURES | \ PHY_DEFAULT_FEATURES) #define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \ PHY_1000BT_FEATURES) /* * Set phydev->irq to PHY_POLL if interrupts are not supported, * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if * the attached driver handles the interrupt */ #define PHY_POLL -1 #define PHY_IGNORE_INTERRUPT -2 #define PHY_HAS_INTERRUPT 0x00000001 #define PHY_IS_INTERNAL 0x00000002 #define PHY_RST_AFTER_CLK_EN 0x00000004 #define MDIO_DEVICE_IS_PHY 0x80000000 /* Interface Mode definitions */ typedef enum { PHY_INTERFACE_MODE_NA, PHY_INTERFACE_MODE_INTERNAL, PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_SGMII, PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_REVMII, PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII, PHY_INTERFACE_MODE_RGMII_ID, PHY_INTERFACE_MODE_RGMII_RXID, PHY_INTERFACE_MODE_RGMII_TXID, PHY_INTERFACE_MODE_RTBI, PHY_INTERFACE_MODE_SMII, PHY_INTERFACE_MODE_XGMII, PHY_INTERFACE_MODE_MOCA, PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TRGMII, PHY_INTERFACE_MODE_1000BASEX, PHY_INTERFACE_MODE_2500BASEX, PHY_INTERFACE_MODE_RXAUI, PHY_INTERFACE_MODE_XAUI, /* 10GBASE-KR, XFI, SFI - single lane 10G Serdes */ PHY_INTERFACE_MODE_10GKR, PHY_INTERFACE_MODE_MAX, } phy_interface_t; /** * phy_supported_speeds - return all speeds currently supported by a phy device * @phy: The phy device to return supported speeds of. * @speeds: buffer to store supported speeds in. * @size: size of speeds buffer. * * Description: Returns the number of supported speeds, and * fills the speeds * buffer with the supported speeds. If speeds buffer is * too small to contain * all currently supported speeds, will return as * many speeds as can fit. */ unsigned int phy_supported_speeds(struct phy_device *phy, unsigned int *speeds, unsigned int size); /** * It maps 'enum phy_interface_t' found in include/linux/phy.h * into the device tree binding of 'phy-mode', so that Ethernet * device driver can get phy interface from device tree. */ static inline const char *phy_modes(phy_interface_t interface) { switch (interface) { case PHY_INTERFACE_MODE_NA: return ""; case PHY_INTERFACE_MODE_INTERNAL: return "internal"; case PHY_INTERFACE_MODE_MII: return "mii"; case PHY_INTERFACE_MODE_GMII: return "gmii"; case PHY_INTERFACE_MODE_SGMII: return "sgmii"; case PHY_INTERFACE_MODE_TBI: return "tbi"; case PHY_INTERFACE_MODE_REVMII: return "rev-mii"; case PHY_INTERFACE_MODE_RMII: return "rmii"; case PHY_INTERFACE_MODE_RGMII: return "rgmii"; case PHY_INTERFACE_MODE_RGMII_ID: return "rgmii-id"; case PHY_INTERFACE_MODE_RGMII_RXID: return "rgmii-rxid"; case PHY_INTERFACE_MODE_RGMII_TXID: return "rgmii-txid"; case PHY_INTERFACE_MODE_RTBI: return "rtbi"; case PHY_INTERFACE_MODE_SMII: return "smii"; case PHY_INTERFACE_MODE_XGMII: return "xgmii"; case PHY_INTERFACE_MODE_MOCA: return "moca"; case PHY_INTERFACE_MODE_QSGMII: return "qsgmii"; case PHY_INTERFACE_MODE_TRGMII: return "trgmii"; case PHY_INTERFACE_MODE_1000BASEX: return "1000base-x"; case PHY_INTERFACE_MODE_2500BASEX: return "2500base-x"; case PHY_INTERFACE_MODE_RXAUI: return "rxaui"; case PHY_INTERFACE_MODE_XAUI: return "xaui"; case PHY_INTERFACE_MODE_10GKR: return "10gbase-kr"; default: return "unknown"; } } #define PHY_INIT_TIMEOUT 100000 #define PHY_STATE_TIME 1 #define PHY_FORCE_TIMEOUT 10 #define PHY_AN_TIMEOUT 10 #define PHY_MAX_ADDR 32 /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ #define PHY_ID_FMT "%s:%02x" #define MII_BUS_ID_SIZE 61 /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ #define MII_ADDR_C45 (1<<30) struct device; struct phylink; struct sk_buff; /* * The Bus class for PHYs. Devices which provide access to * PHYs should register using this structure */ struct mii_bus { struct module *owner; const char *name; char id[MII_BUS_ID_SIZE]; void *priv; int (*read)(struct mii_bus *bus, int addr, int regnum); int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val); int (*reset)(struct mii_bus *bus); /* * A lock to ensure that only one thing can read/write * the MDIO bus at a time */ struct mutex mdio_lock; struct device *parent; enum { MDIOBUS_ALLOCATED = 1, MDIOBUS_REGISTERED, MDIOBUS_UNREGISTERED, MDIOBUS_RELEASED, } state; struct device dev; /* list of all PHYs on bus */ struct mdio_device *mdio_map[PHY_MAX_ADDR]; /* PHY addresses to be ignored when probing */ u32 phy_mask; /* PHY addresses to ignore the TA/read failure */ u32 phy_ignore_ta_mask; /* * An array of interrupts, each PHY's interrupt at the index * matching its address */ int irq[PHY_MAX_ADDR]; /* GPIO reset pulse width in microseconds */ int reset_delay_us; /* RESET GPIO descriptor pointer */ struct gpio_desc *reset_gpiod; }; #define to_mii_bus(d) container_of(d, struct mii_bus, dev) struct mii_bus *mdiobus_alloc_size(size_t); static inline struct mii_bus *mdiobus_alloc(void) { return mdiobus_alloc_size(0); } int __mdiobus_register(struct mii_bus *bus, struct module *owner); #define mdiobus_register(bus) __mdiobus_register(bus, THIS_MODULE) void mdiobus_unregister(struct mii_bus *bus); void mdiobus_free(struct mii_bus *bus); struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv); static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev) { return devm_mdiobus_alloc_size(dev, 0); } void devm_mdiobus_free(struct device *dev, struct mii_bus *bus); struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); #define PHY_INTERRUPT_DISABLED 0x0 #define PHY_INTERRUPT_ENABLED 0x80000000 /* PHY state machine states: * * DOWN: PHY device and driver are not ready for anything. probe * should be called if and only if the PHY is in this state, * given that the PHY device exists. * - PHY driver probe function will, depending on the PHY, set * the state to STARTING or READY * * STARTING: PHY device is coming up, and the ethernet driver is * not ready. PHY drivers may set this in the probe function. * If they do, they are responsible for making sure the state is * eventually set to indicate whether the PHY is UP or READY, * depending on the state when the PHY is done starting up. * - PHY driver will set the state to READY * - start will set the state to PENDING * * READY: PHY is ready to send and receive packets, but the * controller is not. By default, PHYs which do not implement * probe will be set to this state by phy_probe(). If the PHY * driver knows the PHY is ready, and the PHY state is STARTING, * then it sets this STATE. * - start will set the state to UP * * PENDING: PHY device is coming up, but the ethernet driver is * ready. phy_start will set this state if the PHY state is * STARTING. * - PHY driver will set the state to UP when the PHY is ready * * UP: The PHY and attached device are ready to do work. * Interrupts should be started here. * - timer moves to AN * * AN: The PHY is currently negotiating the link state. Link is * therefore down for now. phy_timer will set this state when it * detects the state is UP. config_aneg will set this state * whenever called with phydev->autoneg set to AUTONEG_ENABLE. * - If autonegotiation finishes, but there's no link, it sets * the state to NOLINK. * - If aneg finishes with link, it sets the state to RUNNING, * and calls adjust_link * - If autonegotiation did not finish after an arbitrary amount * of time, autonegotiation should be tried again if the PHY * supports "magic" autonegotiation (back to AN) * - If it didn't finish, and no magic_aneg, move to FORCING. * * NOLINK: PHY is up, but not currently plugged in. * - If the timer notes that the link comes back, we move to RUNNING * - config_aneg moves to AN * - phy_stop moves to HALTED * * FORCING: PHY is being configured with forced settings * - if link is up, move to RUNNING * - If link is down, we drop to the next highest setting, and * retry (FORCING) after a timeout * - phy_stop moves to HALTED * * RUNNING: PHY is currently up, running, and possibly sending * and/or receiving packets * - timer will set CHANGELINK if we're polling (this ensures the * link state is polled every other cycle of this state machine, * which makes it every other second) * - irq will set CHANGELINK * - config_aneg will set AN * - phy_stop moves to HALTED * * CHANGELINK: PHY experienced a change in link state * - timer moves to RUNNING if link * - timer moves to NOLINK if the link is down * - phy_stop moves to HALTED * * HALTED: PHY is up, but no polling or interrupts are done. Or * PHY is in an error state. * * - phy_start moves to RESUMING * * RESUMING: PHY was halted, but now wants to run again. * - If we are forcing, or aneg is done, timer moves to RUNNING * - If aneg is not done, timer moves to AN * - phy_stop moves to HALTED */ enum phy_state { PHY_DOWN = 0, PHY_STARTING, PHY_READY, PHY_PENDING, PHY_UP, PHY_AN, PHY_RUNNING, PHY_NOLINK, PHY_FORCING, PHY_CHANGELINK, PHY_HALTED, PHY_RESUMING }; /** * struct phy_c45_device_ids - 802.3-c45 Device Identifiers * @devices_in_package: Bit vector of devices present. * @device_ids: The device identifer for each present device. */ struct phy_c45_device_ids { u32 devices_in_package; u32 device_ids[8]; }; /* phy_device: An instance of a PHY * * drv: Pointer to the driver for this PHY instance * phy_id: UID for this device found during discovery * c45_ids: 802.3-c45 Device Identifers if is_c45. * is_c45: Set to true if this phy uses clause 45 addressing. * is_internal: Set to true if this phy is internal to a MAC. * is_pseudo_fixed_link: Set to true if this phy is an Ethernet switch, etc. * has_fixups: Set to true if this phy has fixups/quirks. * suspended: Set to true if this phy has been suspended successfully. * suspended_by_mdio_bus: Set to true if this phy was suspended by MDIO bus. * sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal. * loopback_enabled: Set true if this phy has been loopbacked successfully. * state: state of the PHY for management purposes * dev_flags: Device-specific flags used by the PHY driver. * link_timeout: The number of timer firings to wait before the * giving up on the current attempt at acquiring a link * irq: IRQ number of the PHY's interrupt (-1 if none) * phy_timer: The timer for handling the state machine * phy_queue: A work_queue for the phy_mac_interrupt * attached_dev: The attached enet driver's device instance ptr * adjust_link: Callback for the enet controller to respond to * changes in the link state. * * speed, duplex, pause, supported, advertising, lp_advertising, * and autoneg are used like in mii_if_info * * interrupts currently only supports enabled or disabled, * but could be changed in the future to support enabling * and disabling specific interrupts * * Contains some infrastructure for polling and interrupt * handling, as well as handling shifts in PHY hardware state */ struct phy_device { struct mdio_device mdio; /* Information about the PHY type */ /* And management functions */ struct phy_driver *drv; u32 phy_id; struct phy_c45_device_ids c45_ids; unsigned is_c45:1; unsigned is_internal:1; unsigned is_pseudo_fixed_link:1; unsigned has_fixups:1; unsigned suspended:1; unsigned suspended_by_mdio_bus:1; unsigned sysfs_links:1; unsigned loopback_enabled:1; unsigned autoneg:1; /* The most recently read link state */ unsigned link:1; enum phy_state state; u32 dev_flags; phy_interface_t interface; /* * forced speed & duplex (no autoneg) * partner speed & duplex & pause (autoneg) */ int speed; int duplex; int pause; int asym_pause; /* Enabled Interrupts */ u32 interrupts; /* Union of PHY and Attached devices' supported modes */ /* See mii.h for more info */ u32 supported; u32 advertising; u32 lp_advertising; /* Energy efficient ethernet modes which should be prohibited */ u32 eee_broken_modes; int link_timeout; #ifdef CONFIG_LED_TRIGGER_PHY struct phy_led_trigger *phy_led_triggers; unsigned int phy_num_led_triggers; struct phy_led_trigger *last_triggered; struct phy_led_trigger *led_link_trigger; #endif /* * Interrupt number for this PHY * -1 means no interrupt */ int irq; /* private data pointer */ /* For use by PHYs to maintain extra state */ void *priv; /* Interrupt and Polling infrastructure */ struct work_struct phy_queue; struct delayed_work state_queue; struct mutex lock; struct phylink *phylink; struct net_device *attached_dev; u8 mdix; u8 mdix_ctrl; void (*phy_link_change)(struct phy_device *, bool up, bool do_carrier); void (*adjust_link)(struct net_device *dev); }; #define to_phy_device(d) container_of(to_mdio_device(d), \ struct phy_device, mdio) /* struct phy_driver: Driver structure for a particular PHY type * * driver_data: static driver data * phy_id: The result of reading the UID registers of this PHY * type, and ANDing them with the phy_id_mask. This driver * only works for PHYs with IDs which match this field * name: The friendly name of this PHY type * phy_id_mask: Defines the important bits of the phy_id * features: A list of features (speed, duplex, etc) supported * by this PHY * flags: A bitfield defining certain other features this PHY * supports (like interrupts) * * All functions are optional. If config_aneg or read_status * are not implemented, the phy core uses the genphy versions. * Note that none of these functions should be called from * interrupt time. The goal is for the bus read/write functions * to be able to block when the bus transaction is happening, * and be freed up by an interrupt (The MPC85xx has this ability, * though it is not currently supported in the driver). */ struct phy_driver { struct mdio_driver_common mdiodrv; u32 phy_id; char *name; u32 phy_id_mask; u32 features; u32 flags; const void *driver_data; /* * Called to issue a PHY software reset */ int (*soft_reset)(struct phy_device *phydev); /* * Called to initialize the PHY, * including after a reset */ int (*config_init)(struct phy_device *phydev); /* * Called during discovery. Used to set * up device-specific structures, if any */ int (*probe)(struct phy_device *phydev); /* PHY Power Management */ int (*suspend)(struct phy_device *phydev); int (*resume)(struct phy_device *phydev); /* * Configures the advertisement and resets * autonegotiation if phydev->autoneg is on, * forces the speed to the current settings in phydev * if phydev->autoneg is off */ int (*config_aneg)(struct phy_device *phydev); /* Determines the auto negotiation result */ int (*aneg_done)(struct phy_device *phydev); /* Determines the negotiated speed and duplex */ int (*read_status)(struct phy_device *phydev); /* Clears any pending interrupts */ int (*ack_interrupt)(struct phy_device *phydev); /* Enables or disables interrupts */ int (*config_intr)(struct phy_device *phydev); /* * Checks if the PHY generated an interrupt. * For multi-PHY devices with shared PHY interrupt pin */ int (*did_interrupt)(struct phy_device *phydev); /* Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); /* Returns true if this is a suitable driver for the given * phydev. If NULL, matching is based on phy_id and * phy_id_mask. */ int (*match_phy_device)(struct phy_device *phydev); /* Handles ethtool queries for hardware time stamping. */ int (*ts_info)(struct phy_device *phydev, struct ethtool_ts_info *ti); /* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */ int (*hwtstamp)(struct phy_device *phydev, struct ifreq *ifr); /* * Requests a Rx timestamp for 'skb'. If the skb is accepted, * the phy driver promises to deliver it using netif_rx() as * soon as a timestamp becomes available. One of the * PTP_CLASS_ values is passed in 'type'. The function must * return true if the skb is accepted for delivery. */ bool (*rxtstamp)(struct phy_device *dev, struct sk_buff *skb, int type); /* * Requests a Tx timestamp for 'skb'. The phy driver promises * to deliver it using skb_complete_tx_timestamp() as soon as a * timestamp becomes available. One of the PTP_CLASS_ values * is passed in 'type'. */ void (*txtstamp)(struct phy_device *dev, struct sk_buff *skb, int type); /* Some devices (e.g. qnap TS-119P II) require PHY register changes to * enable Wake on LAN, so set_wol is provided to be called in the * ethernet driver's set_wol function. */ int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); /* See set_wol, but for checking whether Wake on LAN is enabled. */ void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); /* * Called to inform a PHY device driver when the core is about to * change the link state. This callback is supposed to be used as * fixup hook for drivers that need to take action when the link * state changes. Drivers are by no means allowed to mess with the * PHY device structure in their implementations. */ void (*link_change_notify)(struct phy_device *dev); /* * Phy specific driver override for reading a MMD register. * This function is optional for PHY specific drivers. When * not provided, the default MMD read function will be used * by phy_read_mmd(), which will use either a direct read for * Clause 45 PHYs or an indirect read for Clause 22 PHYs. * devnum is the MMD device number within the PHY device, * regnum is the register within the selected MMD device. */ int (*read_mmd)(struct phy_device *dev, int devnum, u16 regnum); /* * Phy specific driver override for writing a MMD register. * This function is optional for PHY specific drivers. When * not provided, the default MMD write function will be used * by phy_write_mmd(), which will use either a direct write for * Clause 45 PHYs, or an indirect write for Clause 22 PHYs. * devnum is the MMD device number within the PHY device, * regnum is the register within the selected MMD device. * val is the value to be written. */ int (*write_mmd)(struct phy_device *dev, int devnum, u16 regnum, u16 val); int (*read_page)(struct phy_device *dev); int (*write_page)(struct phy_device *dev, int page); /* Get the size and type of the eeprom contained within a plug-in * module */ int (*module_info)(struct phy_device *dev, struct ethtool_modinfo *modinfo); /* Get the eeprom information from the plug-in module */ int (*module_eeprom)(struct phy_device *dev, struct ethtool_eeprom *ee, u8 *data); /* Get statistics from the phy using ethtool */ int (*get_sset_count)(struct phy_device *dev); void (*get_strings)(struct phy_device *dev, u8 *data); void (*get_stats)(struct phy_device *dev, struct ethtool_stats *stats, u64 *data); /* Get and Set PHY tunables */ int (*get_tunable)(struct phy_device *dev, struct ethtool_tunable *tuna, void *data); int (*set_tunable)(struct phy_device *dev, struct ethtool_tunable *tuna, const void *data); int (*set_loopback)(struct phy_device *dev, bool enable); }; #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ struct phy_driver, mdiodrv) #define PHY_ANY_ID "MATCH ANY PHY" #define PHY_ANY_UID 0xffffffff #define PHY_ID_MATCH_EXACT(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 0) #define PHY_ID_MATCH_MODEL(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 4) #define PHY_ID_MATCH_VENDOR(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 10) /* A Structure for boards to register fixups with the PHY Lib */ struct phy_fixup { struct list_head list; char bus_id[MII_BUS_ID_SIZE + 3]; u32 phy_uid; u32 phy_uid_mask; int (*run)(struct phy_device *phydev); }; const char *phy_speed_to_str(int speed); const char *phy_duplex_to_str(unsigned int duplex); /* A structure for mapping a particular speed and duplex * combination to a particular SUPPORTED and ADVERTISED value */ struct phy_setting { u32 speed; u8 duplex; u8 bit; }; const struct phy_setting * phy_lookup_setting(int speed, int duplex, const unsigned long *mask, size_t maxbit, bool exact); size_t phy_speeds(unsigned int *speeds, size_t size, unsigned long *mask, size_t maxbit); void phy_resolve_aneg_linkmode(struct phy_device *phydev); /** * phy_read_mmd - Convenience function for reading a register * from an MMD on a given PHY. * @phydev: The phy_device struct * @devad: The MMD to read from * @regnum: The register on the MMD to read * * Same rules as for phy_read(); */ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); /** * phy_read - Convenience function for reading a given PHY register * @phydev: the phy_device struct * @regnum: register number to read * * NOTE: MUST NOT be called from interrupt context, * because the bus read/write functions may wait for an interrupt * to conclude the operation. */ static inline int phy_read(struct phy_device *phydev, u32 regnum) { return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum); } /** * __phy_read - convenience function for reading a given PHY register * @phydev: the phy_device struct * @regnum: register number to read * * The caller must have taken the MDIO bus lock. */ static inline int __phy_read(struct phy_device *phydev, u32 regnum) { return __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum); } /** * phy_write - Convenience function for writing a given PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: value to write to @regnum * * NOTE: MUST NOT be called from interrupt context, * because the bus read/write functions may wait for an interrupt * to conclude the operation. */ static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) { return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val); } /** * __phy_write - Convenience function for writing a given PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: value to write to @regnum * * The caller must have taken the MDIO bus lock. */ static inline int __phy_write(struct phy_device *phydev, u32 regnum, u16 val) { return __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val); } int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set); int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set); /** * __phy_set_bits - Convenience function for setting bits in a PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: bits to set * * The caller must have taken the MDIO bus lock. */ static inline int __phy_set_bits(struct phy_device *phydev, u32 regnum, u16 val) { return __phy_modify(phydev, regnum, 0, val); } /** * __phy_clear_bits - Convenience function for clearing bits in a PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: bits to clear * * The caller must have taken the MDIO bus lock. */ static inline int __phy_clear_bits(struct phy_device *phydev, u32 regnum, u16 val) { return __phy_modify(phydev, regnum, val, 0); } /** * phy_set_bits - Convenience function for setting bits in a PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: bits to set */ static inline int phy_set_bits(struct phy_device *phydev, u32 regnum, u16 val) { return phy_modify(phydev, regnum, 0, val); } /** * phy_clear_bits - Convenience function for clearing bits in a PHY register * @phydev: the phy_device struct * @regnum: register number to write * @val: bits to clear */ static inline int phy_clear_bits(struct phy_device *phydev, u32 regnum, u16 val) { return phy_modify(phydev, regnum, val, 0); } /** * phy_interrupt_is_valid - Convenience function for testing a given PHY irq * @phydev: the phy_device struct * * NOTE: must be kept in sync with addition/removal of PHY_POLL and * PHY_IGNORE_INTERRUPT */ static inline bool phy_interrupt_is_valid(struct phy_device *phydev) { return phydev->irq != PHY_POLL && phydev->irq != PHY_IGNORE_INTERRUPT; } /** * phy_polling_mode - Convenience function for testing whether polling is * used to detect PHY status changes * @phydev: the phy_device struct */ static inline bool phy_polling_mode(struct phy_device *phydev) { return phydev->irq == PHY_POLL; } /** * phy_is_internal - Convenience function for testing if a PHY is internal * @phydev: the phy_device struct */ static inline bool phy_is_internal(struct phy_device *phydev) { return phydev->is_internal; } /** * phy_interface_mode_is_rgmii - Convenience function for testing if a * PHY interface mode is RGMII (all variants) * @mode: the phy_interface_t enum */ static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode) { return mode >= PHY_INTERFACE_MODE_RGMII && mode <= PHY_INTERFACE_MODE_RGMII_TXID; }; /** * phy_interface_mode_is_8023z() - does the phy interface mode use 802.3z * negotiation * @mode: one of &enum phy_interface_t * * Returns true if the phy interface mode uses the 16-bit negotiation * word as defined in 802.3z. (See 802.3-2015 37.2.1 Config_Reg encoding) */ static inline bool phy_interface_mode_is_8023z(phy_interface_t mode) { return mode == PHY_INTERFACE_MODE_1000BASEX || mode == PHY_INTERFACE_MODE_2500BASEX; } /** * phy_interface_is_rgmii - Convenience function for testing if a PHY interface * is RGMII (all variants) * @phydev: the phy_device struct */ static inline bool phy_interface_is_rgmii(struct phy_device *phydev) { return phy_interface_mode_is_rgmii(phydev->interface); }; /* * phy_is_pseudo_fixed_link - Convenience function for testing if this * PHY is the CPU port facing side of an Ethernet switch, or similar. * @phydev: the phy_device struct */ static inline bool phy_is_pseudo_fixed_link(struct phy_device *phydev) { return phydev->is_pseudo_fixed_link; } /** * phy_write_mmd - Convenience function for writing a register * on an MMD on a given PHY. * @phydev: The phy_device struct * @devad: The MMD to read from * @regnum: The register on the MMD to read * @val: value to write to @regnum * * Same rules as for phy_write(); */ int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); int phy_save_page(struct phy_device *phydev); int phy_select_page(struct phy_device *phydev, int page); int phy_restore_page(struct phy_device *phydev, int oldpage, int ret); int phy_read_paged(struct phy_device *phydev, int page, u32 regnum); int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val); int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum, u16 mask, u16 set); struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, bool is_c45, struct phy_c45_device_ids *c45_ids); #if IS_ENABLED(CONFIG_PHYLIB) struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); int phy_device_register(struct phy_device *phy); void phy_device_free(struct phy_device *phydev); #else static inline struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) { return NULL; } static inline int phy_device_register(struct phy_device *phy) { return 0; } static inline void phy_device_free(struct phy_device *phydev) { } #endif /* CONFIG_PHYLIB */ void phy_device_remove(struct phy_device *phydev); int phy_init_hw(struct phy_device *phydev); int phy_suspend(struct phy_device *phydev); int phy_resume(struct phy_device *phydev); int __phy_resume(struct phy_device *phydev); int phy_loopback(struct phy_device *phydev, bool enable); struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, phy_interface_t interface); struct phy_device *phy_find_first(struct mii_bus *bus); int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, u32 flags, phy_interface_t interface); int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, void (*handler)(struct net_device *), phy_interface_t interface); struct phy_device *phy_connect(struct net_device *dev, const char *bus_id, void (*handler)(struct net_device *), phy_interface_t interface); void phy_disconnect(struct phy_device *phydev); void phy_detach(struct phy_device *phydev); void phy_start(struct phy_device *phydev); void phy_stop(struct phy_device *phydev); int phy_start_aneg(struct phy_device *phydev); int phy_aneg_done(struct phy_device *phydev); int phy_speed_down(struct phy_device *phydev, bool sync); int phy_speed_up(struct phy_device *phydev); int phy_stop_interrupts(struct phy_device *phydev); int phy_restart_aneg(struct phy_device *phydev); int phy_reset_after_clk_enable(struct phy_device *phydev); static inline void phy_device_reset(struct phy_device *phydev, int value) { mdio_device_reset(&phydev->mdio, value); } #define phydev_err(_phydev, format, args...) \ dev_err(&_phydev->mdio.dev, format, ##args) #define phydev_dbg(_phydev, format, args...) \ dev_dbg(&_phydev->mdio.dev, format, ##args) static inline const char *phydev_name(const struct phy_device *phydev) { return dev_name(&phydev->mdio.dev); } void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) __printf(2, 3); void phy_attached_info(struct phy_device *phydev); /* Clause 22 PHY */ int genphy_config_init(struct phy_device *phydev); int genphy_setup_forced(struct phy_device *phydev); int genphy_restart_aneg(struct phy_device *phydev); int genphy_config_aneg(struct phy_device *phydev); int genphy_aneg_done(struct phy_device *phydev); int genphy_update_link(struct phy_device *phydev); int genphy_read_status(struct phy_device *phydev); int genphy_suspend(struct phy_device *phydev); int genphy_resume(struct phy_device *phydev); int genphy_loopback(struct phy_device *phydev, bool enable); int genphy_soft_reset(struct phy_device *phydev); static inline int genphy_no_soft_reset(struct phy_device *phydev) { return 0; } int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, u16 regnum); int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum, u16 regnum, u16 val); /* Clause 45 PHY */ int genphy_c45_restart_aneg(struct phy_device *phydev); int genphy_c45_aneg_done(struct phy_device *phydev); int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask); int genphy_c45_read_lpa(struct phy_device *phydev); int genphy_c45_read_pma(struct phy_device *phydev); int genphy_c45_pma_setup_forced(struct phy_device *phydev); int genphy_c45_an_disable_aneg(struct phy_device *phydev); int genphy_c45_read_mdix(struct phy_device *phydev); /* The gen10g_* functions are the old Clause 45 stub */ int gen10g_config_aneg(struct phy_device *phydev); int gen10g_read_status(struct phy_device *phydev); int gen10g_no_soft_reset(struct phy_device *phydev); int gen10g_config_init(struct phy_device *phydev); int gen10g_suspend(struct phy_device *phydev); int gen10g_resume(struct phy_device *phydev); static inline int phy_read_status(struct phy_device *phydev) { if (!phydev->drv) return -EIO; if (phydev->drv->read_status) return phydev->drv->read_status(phydev); else return genphy_read_status(phydev); } void phy_driver_unregister(struct phy_driver *drv); void phy_drivers_unregister(struct phy_driver *drv, int n); int phy_driver_register(struct phy_driver *new_driver, struct module *owner); int phy_drivers_register(struct phy_driver *new_driver, int n, struct module *owner); void phy_state_machine(struct work_struct *work); void phy_change_work(struct work_struct *work); void phy_mac_interrupt(struct phy_device *phydev); void phy_start_machine(struct phy_device *phydev); void phy_stop_machine(struct phy_device *phydev); void phy_trigger_machine(struct phy_device *phydev, bool sync); int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); void phy_ethtool_ksettings_get(struct phy_device *phydev, struct ethtool_link_ksettings *cmd); int phy_ethtool_ksettings_set(struct phy_device *phydev, const struct ethtool_link_ksettings *cmd); int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd); int phy_start_interrupts(struct phy_device *phydev); void phy_print_status(struct phy_device *phydev); int phy_set_max_speed(struct phy_device *phydev, u32 max_speed); int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, int (*run)(struct phy_device *)); int phy_register_fixup_for_id(const char *bus_id, int (*run)(struct phy_device *)); int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, int (*run)(struct phy_device *)); int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask); int phy_unregister_fixup_for_id(const char *bus_id); int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask); int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable); int phy_get_eee_err(struct phy_device *phydev); int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data); int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data); int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); int phy_ethtool_get_link_ksettings(struct net_device *ndev, struct ethtool_link_ksettings *cmd); int phy_ethtool_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd); int phy_ethtool_nway_reset(struct net_device *ndev); #if IS_ENABLED(CONFIG_PHYLIB) int __init mdio_bus_init(void); void mdio_bus_exit(void); #endif /* Inline function for use within net/core/ethtool.c (built-in) */ static inline int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data) { if (!phydev->drv) return -EIO; mutex_lock(&phydev->lock); phydev->drv->get_strings(phydev, data); mutex_unlock(&phydev->lock); return 0; } static inline int phy_ethtool_get_sset_count(struct phy_device *phydev) { int ret; if (!phydev->drv) return -EIO; if (phydev->drv->get_sset_count && phydev->drv->get_strings && phydev->drv->get_stats) { mutex_lock(&phydev->lock); ret = phydev->drv->get_sset_count(phydev); mutex_unlock(&phydev->lock); return ret; } return -EOPNOTSUPP; } static inline int phy_ethtool_get_stats(struct phy_device *phydev, struct ethtool_stats *stats, u64 *data) { if (!phydev->drv) return -EIO; mutex_lock(&phydev->lock); phydev->drv->get_stats(phydev, stats, data); mutex_unlock(&phydev->lock); return 0; } extern struct bus_type mdio_bus_type; struct mdio_board_info { const char *bus_id; char modalias[MDIO_NAME_SIZE]; int mdio_addr; const void *platform_data; }; #if IS_ENABLED(CONFIG_MDIO_DEVICE) int mdiobus_register_board_info(const struct mdio_board_info *info, unsigned int n); #else static inline int mdiobus_register_board_info(const struct mdio_board_info *i, unsigned int n) { return 0; } #endif /** * module_phy_driver() - Helper macro for registering PHY drivers * @__phy_drivers: array of PHY drivers to register * * Helper macro for PHY drivers which do not do anything special in module * init/exit. Each module may only use this macro once, and calling it * replaces module_init() and module_exit(). */ #define phy_module_driver(__phy_drivers, __count) \ static int __init phy_module_init(void) \ { \ return phy_drivers_register(__phy_drivers, __count, THIS_MODULE); \ } \ module_init(phy_module_init); \ static void __exit phy_module_exit(void) \ { \ phy_drivers_unregister(__phy_drivers, __count); \ } \ module_exit(phy_module_exit) #define module_phy_driver(__phy_drivers) \ phy_module_driver(__phy_drivers, ARRAY_SIZE(__phy_drivers)) #endif /* __PHY_H */