/* * Copyright (c) 2020, The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef _RX_MSDU_DESC_INFO_H_ #define _RX_MSDU_DESC_INFO_H_ #if !defined(__ASSEMBLER__) #endif // ################ START SUMMARY ################# // // Dword Fields // 0 first_msdu_in_mpdu_flag[0], last_msdu_in_mpdu_flag[1], msdu_continuation[2], msdu_length[16:3], reo_destination_indication[21:17], msdu_drop[22], sa_is_valid[23], sa_idx_timeout[24], da_is_valid[25], da_is_mcbc[26], da_idx_timeout[27], l3_header_padding_msb[28], tcp_udp_chksum_fail[29], ip_chksum_fail[30], raw_mpdu[31] // 1 sa_idx_or_sw_peer_id_14_0[14:0], mpdu_ast_idx_or_sw_peer_id_14_0[29:15], fr_ds[30], to_ds[31] // // ################ END SUMMARY ################# #define NUM_OF_DWORDS_RX_MSDU_DESC_INFO 2 struct rx_msdu_desc_info { uint32_t first_msdu_in_mpdu_flag : 1, //[0] last_msdu_in_mpdu_flag : 1, //[1] msdu_continuation : 1, //[2] msdu_length : 14, //[16:3] reo_destination_indication : 5, //[21:17] msdu_drop : 1, //[22] sa_is_valid : 1, //[23] sa_idx_timeout : 1, //[24] da_is_valid : 1, //[25] da_is_mcbc : 1, //[26] da_idx_timeout : 1, //[27] l3_header_padding_msb : 1, //[28] tcp_udp_chksum_fail : 1, //[29] ip_chksum_fail : 1, //[30] raw_mpdu : 1; //[31] uint32_t sa_idx_or_sw_peer_id_14_0 : 15, //[14:0] mpdu_ast_idx_or_sw_peer_id_14_0 : 15, //[29:15] fr_ds : 1, //[30] to_ds : 1; //[31] }; /* first_msdu_in_mpdu_flag Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU This is not the first MSDU in the MPDU. This MSDU is the first one in the MPDU. last_msdu_in_mpdu_flag Consumer: WBM/REO/SW/FW Producer: RXDMA Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU There are more MSDUs linked to this MSDU that belongs to this MPDU this MSDU is the last one in the MPDU. This setting is only allowed in combination with 'Msdu_continuation' set to 0. This implies that when an msdu is spread out over multiple buffers and thus msdu_continuation is set, only for the very last buffer of the msdu, can the 'last_msdu_in_mpdu_flag' be set. When both first_msdu_in_mpdu_flag and last_msdu_in_mpdu_flag are set, the MPDU that this MSDU belongs to only contains a single MSDU. msdu_continuation When set, this MSDU buffer was not able to hold the entire MSDU. The next buffer will therefor contain additional information related to this MSDU. msdu_length Parsed from RX_MSDU_START TLV . In the case MSDU spans over multiple buffers, this field will be valid in the First buffer used by MSDU. Full MSDU length in bytes after decapsulation. This field is still valid for MPDU frames without A-MSDU. It still represents MSDU length after decapsulation Or in case of RAW MPDUs, it indicates the length of the entire MPDU (without FCS field) reo_destination_indication Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU The ID of the REO exit ring where the MSDU frame shall push after (MPDU level) reordering has finished. Reo will push the frame into the REO2TCL ring Reo will push the frame into the REO2SW1 ring Reo will push the frame into the REO2SW2 ring Reo will push the frame into the REO2SW3 ring Reo will push the frame into the REO2SW4 ring Reo will push the frame into the REO_release ring Reo will push the frame into the REO2FW ring Reo will push the frame into the REO2SW5 ring (REO remaps this in chips without REO2SW5 ring, e.g. Pine) Reo will push the frame into the REO2SW6 ring (REO remaps this in chips without REO2SW6 ring, e.g. Pine) REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this msdu_drop Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU When set, REO shall drop this MSDU and not forward it to any other ring... sa_is_valid Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU Indicates that OLE found a valid SA entry for this MSDU sa_idx_timeout Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU Indicates an unsuccessful MAC source address search due to the expiring of the search timer for this MSDU da_is_valid Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU Indicates that OLE found a valid DA entry for this MSDU da_is_mcbc Field Only valid if da_is_valid is set Indicates the DA address was a Multicast of Broadcast address for this MSDU da_idx_timeout Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU Indicates an unsuccessful MAC destination address search due to the expiring of the search timer for this MSDU l3_header_padding_msb Passed on from 'RX_MSDU_END' TLV (only the MSB is reported as the LSB is always zero) Number of bytes padded to make sure that the L3 header will always start of a Dword boundary tcp_udp_chksum_fail Passed on from 'RX_ATTENTION' TLV Indicates that the computed checksum did not match the checksum in the TCP/UDP header. ip_chksum_fail Passed on from 'RX_ATTENTION' TLV Indicates that the computed checksum did not match the checksum in the IP header. raw_mpdu Passed on from 'RX_MPDU_INFO' structure in 'RX_MPDU_START' TLV Set to 1 by RXOLE when it has not performed any 802.11 to Ethernet/Natvie WiFi header conversion on this MPDU. sa_idx_or_sw_peer_id_14_0 Passed on from 'RX_MSDU_END' TLV (one MSB is omitted) Based on a register configuration in RXDMA, this field will contain: The offset in the address search table which matches the MAC source address OR 'sw_peer_id' from the address search entry corresponding to the source address of the MSDU mpdu_ast_idx_or_sw_peer_id_14_0 Passed on from 'RX_MPDU_INFO' structure in 'RX_MPDU_START' TLV (one MSB is omitted) Based on a register configuration in RXDMA, this field will contain: The index of the address search entry corresponding to this MPDU (a value of 0xFFFF indicates an invalid AST index, meaning that no AST entry was found or no AST search was performed) OR: 'sw_peer_id' from the address search entry corresponding to this MPDU (in case of ndp or phy_err or AST_based_lookup_valid == 0, this field will be set to 0) fr_ds Passed on from 'RX_MPDU_INFO' structure in 'RX_MPDU_START' TLV Set if the 'from DS' bit is set in the frame control. to_ds Passed on from 'RX_MPDU_INFO' structure in 'RX_MPDU_START' TLV Set if the 'to DS' bit is set in the frame control. */ /* Description RX_MSDU_DESC_INFO_0_FIRST_MSDU_IN_MPDU_FLAG Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU This is not the first MSDU in the MPDU. This MSDU is the first one in the MPDU. */ #define RX_MSDU_DESC_INFO_0_FIRST_MSDU_IN_MPDU_FLAG_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_FIRST_MSDU_IN_MPDU_FLAG_LSB 0 #define RX_MSDU_DESC_INFO_0_FIRST_MSDU_IN_MPDU_FLAG_MASK 0x00000001 /* Description RX_MSDU_DESC_INFO_0_LAST_MSDU_IN_MPDU_FLAG Consumer: WBM/REO/SW/FW Producer: RXDMA Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU There are more MSDUs linked to this MSDU that belongs to this MPDU this MSDU is the last one in the MPDU. This setting is only allowed in combination with 'Msdu_continuation' set to 0. This implies that when an msdu is spread out over multiple buffers and thus msdu_continuation is set, only for the very last buffer of the msdu, can the 'last_msdu_in_mpdu_flag' be set. When both first_msdu_in_mpdu_flag and last_msdu_in_mpdu_flag are set, the MPDU that this MSDU belongs to only contains a single MSDU. */ #define RX_MSDU_DESC_INFO_0_LAST_MSDU_IN_MPDU_FLAG_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_LAST_MSDU_IN_MPDU_FLAG_LSB 1 #define RX_MSDU_DESC_INFO_0_LAST_MSDU_IN_MPDU_FLAG_MASK 0x00000002 /* Description RX_MSDU_DESC_INFO_0_MSDU_CONTINUATION When set, this MSDU buffer was not able to hold the entire MSDU. The next buffer will therefor contain additional information related to this MSDU. */ #define RX_MSDU_DESC_INFO_0_MSDU_CONTINUATION_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_MSDU_CONTINUATION_LSB 2 #define RX_MSDU_DESC_INFO_0_MSDU_CONTINUATION_MASK 0x00000004 /* Description RX_MSDU_DESC_INFO_0_MSDU_LENGTH Parsed from RX_MSDU_START TLV . In the case MSDU spans over multiple buffers, this field will be valid in the First buffer used by MSDU. Full MSDU length in bytes after decapsulation. This field is still valid for MPDU frames without A-MSDU. It still represents MSDU length after decapsulation Or in case of RAW MPDUs, it indicates the length of the entire MPDU (without FCS field) */ #define RX_MSDU_DESC_INFO_0_MSDU_LENGTH_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_MSDU_LENGTH_LSB 3 #define RX_MSDU_DESC_INFO_0_MSDU_LENGTH_MASK 0x0001fff8 /* Description RX_MSDU_DESC_INFO_0_REO_DESTINATION_INDICATION Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU The ID of the REO exit ring where the MSDU frame shall push after (MPDU level) reordering has finished. Reo will push the frame into the REO2TCL ring Reo will push the frame into the REO2SW1 ring Reo will push the frame into the REO2SW2 ring Reo will push the frame into the REO2SW3 ring Reo will push the frame into the REO2SW4 ring Reo will push the frame into the REO_release ring Reo will push the frame into the REO2FW ring Reo will push the frame into the REO2SW5 ring (REO remaps this in chips without REO2SW5 ring, e.g. Pine) Reo will push the frame into the REO2SW6 ring (REO remaps this in chips without REO2SW6 ring, e.g. Pine) REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this REO remaps this */ #define RX_MSDU_DESC_INFO_0_REO_DESTINATION_INDICATION_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_REO_DESTINATION_INDICATION_LSB 17 #define RX_MSDU_DESC_INFO_0_REO_DESTINATION_INDICATION_MASK 0x003e0000 /* Description RX_MSDU_DESC_INFO_0_MSDU_DROP Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU When set, REO shall drop this MSDU and not forward it to any other ring... */ #define RX_MSDU_DESC_INFO_0_MSDU_DROP_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_MSDU_DROP_LSB 22 #define RX_MSDU_DESC_INFO_0_MSDU_DROP_MASK 0x00400000 /* Description RX_MSDU_DESC_INFO_0_SA_IS_VALID Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU Indicates that OLE found a valid SA entry for this MSDU */ #define RX_MSDU_DESC_INFO_0_SA_IS_VALID_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_SA_IS_VALID_LSB 23 #define RX_MSDU_DESC_INFO_0_SA_IS_VALID_MASK 0x00800000 /* Description RX_MSDU_DESC_INFO_0_SA_IDX_TIMEOUT Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU Indicates an unsuccessful MAC source address search due to the expiring of the search timer for this MSDU */ #define RX_MSDU_DESC_INFO_0_SA_IDX_TIMEOUT_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_SA_IDX_TIMEOUT_LSB 24 #define RX_MSDU_DESC_INFO_0_SA_IDX_TIMEOUT_MASK 0x01000000 /* Description RX_MSDU_DESC_INFO_0_DA_IS_VALID Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU Indicates that OLE found a valid DA entry for this MSDU */ #define RX_MSDU_DESC_INFO_0_DA_IS_VALID_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_DA_IS_VALID_LSB 25 #define RX_MSDU_DESC_INFO_0_DA_IS_VALID_MASK 0x02000000 /* Description RX_MSDU_DESC_INFO_0_DA_IS_MCBC Field Only valid if da_is_valid is set Indicates the DA address was a Multicast of Broadcast address for this MSDU */ #define RX_MSDU_DESC_INFO_0_DA_IS_MCBC_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_DA_IS_MCBC_LSB 26 #define RX_MSDU_DESC_INFO_0_DA_IS_MCBC_MASK 0x04000000 /* Description RX_MSDU_DESC_INFO_0_DA_IDX_TIMEOUT Parsed from RX_MSDU_END TLV . In the case MSDU spans over multiple buffers, this field will be valid in the Last buffer used by the MSDU Indicates an unsuccessful MAC destination address search due to the expiring of the search timer for this MSDU */ #define RX_MSDU_DESC_INFO_0_DA_IDX_TIMEOUT_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_DA_IDX_TIMEOUT_LSB 27 #define RX_MSDU_DESC_INFO_0_DA_IDX_TIMEOUT_MASK 0x08000000 /* Description RX_MSDU_DESC_INFO_0_L3_HEADER_PADDING_MSB Passed on from 'RX_MSDU_END' TLV (only the MSB is reported as the LSB is always zero) Number of bytes padded to make sure that the L3 header will always start of a Dword boundary */ #define RX_MSDU_DESC_INFO_0_L3_HEADER_PADDING_MSB_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_L3_HEADER_PADDING_MSB_LSB 28 #define RX_MSDU_DESC_INFO_0_L3_HEADER_PADDING_MSB_MASK 0x10000000 /* Description RX_MSDU_DESC_INFO_0_TCP_UDP_CHKSUM_FAIL Passed on from 'RX_ATTENTION' TLV Indicates that the computed checksum did not match the checksum in the TCP/UDP header. */ #define RX_MSDU_DESC_INFO_0_TCP_UDP_CHKSUM_FAIL_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_TCP_UDP_CHKSUM_FAIL_LSB 29 #define RX_MSDU_DESC_INFO_0_TCP_UDP_CHKSUM_FAIL_MASK 0x20000000 /* Description RX_MSDU_DESC_INFO_0_IP_CHKSUM_FAIL Passed on from 'RX_ATTENTION' TLV Indicates that the computed checksum did not match the checksum in the IP header. */ #define RX_MSDU_DESC_INFO_0_IP_CHKSUM_FAIL_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_IP_CHKSUM_FAIL_LSB 30 #define RX_MSDU_DESC_INFO_0_IP_CHKSUM_FAIL_MASK 0x40000000 /* Description RX_MSDU_DESC_INFO_0_RAW_MPDU Passed on from 'RX_MPDU_INFO' structure in 'RX_MPDU_START' TLV Set to 1 by RXOLE when it has not performed any 802.11 to Ethernet/Natvie WiFi header conversion on this MPDU. */ #define RX_MSDU_DESC_INFO_0_RAW_MPDU_OFFSET 0x00000000 #define RX_MSDU_DESC_INFO_0_RAW_MPDU_LSB 31 #define RX_MSDU_DESC_INFO_0_RAW_MPDU_MASK 0x80000000 /* Description RX_MSDU_DESC_INFO_1_SA_IDX_OR_SW_PEER_ID_14_0 Passed on from 'RX_MSDU_END' TLV (one MSB is omitted) Based on a register configuration in RXDMA, this field will contain: The offset in the address search table which matches the MAC source address OR 'sw_peer_id' from the address search entry corresponding to the source address of the MSDU */ #define RX_MSDU_DESC_INFO_1_SA_IDX_OR_SW_PEER_ID_14_0_OFFSET 0x00000004 #define RX_MSDU_DESC_INFO_1_SA_IDX_OR_SW_PEER_ID_14_0_LSB 0 #define RX_MSDU_DESC_INFO_1_SA_IDX_OR_SW_PEER_ID_14_0_MASK 0x00007fff /* Description RX_MSDU_DESC_INFO_1_MPDU_AST_IDX_OR_SW_PEER_ID_14_0 Passed on from 'RX_MPDU_INFO' structure in 'RX_MPDU_START' TLV (one MSB is omitted) Based on a register configuration in RXDMA, this field will contain: The index of the address search entry corresponding to this MPDU (a value of 0xFFFF indicates an invalid AST index, meaning that no AST entry was found or no AST search was performed) OR: 'sw_peer_id' from the address search entry corresponding to this MPDU (in case of ndp or phy_err or AST_based_lookup_valid == 0, this field will be set to 0) */ #define RX_MSDU_DESC_INFO_1_MPDU_AST_IDX_OR_SW_PEER_ID_14_0_OFFSET 0x00000004 #define RX_MSDU_DESC_INFO_1_MPDU_AST_IDX_OR_SW_PEER_ID_14_0_LSB 15 #define RX_MSDU_DESC_INFO_1_MPDU_AST_IDX_OR_SW_PEER_ID_14_0_MASK 0x3fff8000 /* Description RX_MSDU_DESC_INFO_1_FR_DS Passed on from 'RX_MPDU_INFO' structure in 'RX_MPDU_START' TLV Set if the 'from DS' bit is set in the frame control. */ #define RX_MSDU_DESC_INFO_1_FR_DS_OFFSET 0x00000004 #define RX_MSDU_DESC_INFO_1_FR_DS_LSB 30 #define RX_MSDU_DESC_INFO_1_FR_DS_MASK 0x40000000 /* Description RX_MSDU_DESC_INFO_1_TO_DS Passed on from 'RX_MPDU_INFO' structure in 'RX_MPDU_START' TLV Set if the 'to DS' bit is set in the frame control. */ #define RX_MSDU_DESC_INFO_1_TO_DS_OFFSET 0x00000004 #define RX_MSDU_DESC_INFO_1_TO_DS_LSB 31 #define RX_MSDU_DESC_INFO_1_TO_DS_MASK 0x80000000 #endif // _RX_MSDU_DESC_INFO_H_