/* * Copyright (c) 2017 The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for * any purpose with or without fee is hereby granted, provided that the * above copyright notice and this permission notice appear in all * copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR * PERFORMANCE OF THIS SOFTWARE. */ #ifndef _RXPCU_PPDU_END_INFO_H_ #define _RXPCU_PPDU_END_INFO_H_ #if !defined(__ASSEMBLER__) #endif #include "phyrx_abort_request_info.h" #include "macrx_abort_request_info.h" // ################ START SUMMARY ################# // // Dword Fields // 0 wb_timestamp_lower_32[31:0] // 1 wb_timestamp_upper_32[31:0] // 2 rx_antenna[23:0], tx_ht_vht_ack[24], unsupported_mu_nc[25], otp_txbf_disable[26], previous_tlv_corrupted[27], phyrx_abort_request_info_valid[28], macrx_abort_request_info_valid[29], reserved[31:30] // 3 coex_bt_tx_from_start_of_rx[0], coex_bt_tx_after_start_of_rx[1], coex_wan_tx_from_start_of_rx[2], coex_wan_tx_after_start_of_rx[3], coex_wlan_tx_from_start_of_rx[4], coex_wlan_tx_after_start_of_rx[5], mpdu_delimiter_errors_seen[6], ftm_tm[8:7], dialog_token[16:9], follow_up_dialog_token[24:17], bb_captured_channel[25], reserved_3[31:26] // 4 before_mpdu_count_passing_fcs[7:0], before_mpdu_count_failing_fcs[15:8], after_mpdu_count_passing_fcs[23:16], after_mpdu_count_failing_fcs[31:24] // 5 phy_timestamp_tx_lower_32[31:0] // 6 phy_timestamp_tx_upper_32[31:0] // 7 bb_length[15:0], bb_data[16], reserved_7[31:17] // 8 rx_ppdu_duration[23:0], reserved_8[31:24] // 9 ast_index[15:0], ast_index_valid[16], reserved_9[31:17] // 10 struct phyrx_abort_request_info phyrx_abort_request_info_details; // 11 struct macrx_abort_request_info macrx_abort_request_info_details; // 12 rx_ppdu_end_marker[31:0] // // ################ END SUMMARY ################# #define NUM_OF_DWORDS_RXPCU_PPDU_END_INFO 13 struct rxpcu_ppdu_end_info { uint32_t wb_timestamp_lower_32 : 32; //[31:0] uint32_t wb_timestamp_upper_32 : 32; //[31:0] uint32_t rx_antenna : 24, //[23:0] tx_ht_vht_ack : 1, //[24] unsupported_mu_nc : 1, //[25] otp_txbf_disable : 1, //[26] previous_tlv_corrupted : 1, //[27] phyrx_abort_request_info_valid : 1, //[28] macrx_abort_request_info_valid : 1, //[29] reserved : 2; //[31:30] uint32_t coex_bt_tx_from_start_of_rx : 1, //[0] coex_bt_tx_after_start_of_rx : 1, //[1] coex_wan_tx_from_start_of_rx : 1, //[2] coex_wan_tx_after_start_of_rx : 1, //[3] coex_wlan_tx_from_start_of_rx : 1, //[4] coex_wlan_tx_after_start_of_rx : 1, //[5] mpdu_delimiter_errors_seen : 1, //[6] ftm_tm : 2, //[8:7] dialog_token : 8, //[16:9] follow_up_dialog_token : 8, //[24:17] bb_captured_channel : 1, //[25] reserved_3 : 6; //[31:26] uint32_t before_mpdu_count_passing_fcs : 8, //[7:0] before_mpdu_count_failing_fcs : 8, //[15:8] after_mpdu_count_passing_fcs : 8, //[23:16] after_mpdu_count_failing_fcs : 8; //[31:24] uint32_t phy_timestamp_tx_lower_32 : 32; //[31:0] uint32_t phy_timestamp_tx_upper_32 : 32; //[31:0] uint32_t bb_length : 16, //[15:0] bb_data : 1, //[16] reserved_7 : 15; //[31:17] uint32_t rx_ppdu_duration : 24, //[23:0] reserved_8 : 8; //[31:24] uint32_t ast_index : 16, //[15:0] ast_index_valid : 1, //[16] reserved_9 : 15; //[31:17] struct phyrx_abort_request_info phyrx_abort_request_info_details; struct macrx_abort_request_info macrx_abort_request_info_details; uint16_t reserved_after_struct16 : 16; //[31:16] uint32_t rx_ppdu_end_marker : 32; //[31:0] }; /* wb_timestamp_lower_32 WLAN/BT timestamp is a 1 usec resolution timestamp which does not get updated based on receive beacon like TSF. The same rules for capturing tsf_timestamp are used to capture the wb_timestamp. This field represents the lower 32 bits of the 64-bit timestamp wb_timestamp_upper_32 WLAN/BT timestamp is a 1 usec resolution timestamp which does not get updated based on receive beacon like TSF. The same rules for capturing tsf_timestamp are used to capture the wb_timestamp. This field represents the upper 32 bits of the 64-bit timestamp rx_antenna Receive antenna value ??? tx_ht_vht_ack Indicates that a HT or VHT Ack/BA frame was transmitted in response to this receive packet. unsupported_mu_nc Set if MU Nc > 2 in received NDPA. If this bit is set, even though AID and BSSID are matched, MAC doesn't send tx_expect_ndp to PHY, because MU Nc > 2 is not supported in Helium. otp_txbf_disable Set if either OTP_SUBFEE_DISABLE or OTP_TXBF_DISABLE is set and if RXPU receives directed NDPA frame. Then, RXPCU should not send TX_EXPECT_NDP TLV to SW but set this bit to inform SW. previous_tlv_corrupted When set, the TLV preceding this RXPCU_END_INFO TLV within the RX_PPDU_END TLV, is corrupted. Not the entire TLV was received.... Likely due to an abort scenario... If abort is to blame, see the abort data datastructure for details. phyrx_abort_request_info_valid When set, the PHY sent an PHYRX_ABORT_REQUEST TLV to RXPCU. The abort fields embedded in this TLV contain valid info. macrx_abort_request_info_valid When set, the PHY sent an PHYRX_ABORT_REQUEST TLV to RXPCU. The abort fields embedded in this TLV contain valid info. reserved coex_bt_tx_from_start_of_rx Set when BT TX was ongoing when WLAN RX started coex_bt_tx_after_start_of_rx coex_wan_tx_from_start_of_rx Set when WAN TX was ongoing when WLAN RX started coex_wan_tx_after_start_of_rx Set when WAN TX started while WLAN RX was already ongoing coex_wlan_tx_from_start_of_rx Set when other WLAN TX was ongoing when WLAN RX started coex_wlan_tx_after_start_of_rx Set when other WLAN TX started while WLAN RX was already ongoing mpdu_delimiter_errors_seen When set, MPDU delimiter errors have been detected during this PPDU reception ftm_tm Indicate the timestamp is for the FTM or TM frame 0: non TM or FTM frame 1: FTM frame 2: TM frame 3: reserved dialog_token The dialog token in the FTM or TM frame. Only valid when the FTM is set. Clear to 254 for a non-FTM frame follow_up_dialog_token The follow up dialog token in the FTM or TM frame. Only valid when the FTM is set. Clear to 0 for a non-FTM frame, The follow up dialog token in the FTM frame. Only valid when the FTM is set. Clear to 255 for a non-FTM frame bb_captured_channel Set by RXPCU when the following conditions are met: Directed (=> unicast) TM or FTM frame has been received with passing FCS PHYRX_PKT_END. Location_info_valid is set reserved_3 before_mpdu_count_passing_fcs Number of MPDUs received in this PPDU that passed the FCS check before the Coex TX started before_mpdu_count_failing_fcs Number of MPDUs received in this PPDU that failed the FCS check before the Coex TX started after_mpdu_count_passing_fcs Number of MPDUs received in this PPDU that passed the FCS check after the moment the Coex TX started (Note: The partially received MPDU when the COEX tx start event came in falls in the after category) after_mpdu_count_failing_fcs Number of MPDUs received in this PPDU that failed the FCS check after the moment the Coex TX started (Note: The partially received MPDU when the COEX tx start event came in falls in the after category) phy_timestamp_tx_lower_32 The PHY timestamp in the AMPI of the most recent rising edge (TODO: of what ???) after the TX_PHY_DESC.  This field indicates the lower 32 bits of the timestamp phy_timestamp_tx_upper_32 The PHY timestamp in the AMPI of the most recent rising edge (TODO: of what ???) after the TX_PHY_DESC.  This field indicates the upper 32 bits of the timestamp bb_length Indicates the number of bytes of baseband information for PPDUs where the BB descriptor preamble type is 0x80 to 0xFF which indicates that this is not a normal PPDU but rather contains baseband debug information. TODO: Is this still needed ??? bb_data Indicates that BB data associated with this PPDU will exist in the receive buffer. The exact contents of this BB data can be found by decoding the BB TLV in the buffer associated with the BB data. See vector_fragment in the Helium_mac_phy_interface.docx reserved_7 Reserved: HW should fill with 0, FW should ignore. rx_ppdu_duration The length of this PPDU reception in us reserved_8 ast_index The AST index of the receive Ack/BA. This information is provided from the TXPCU to the RXPCU for receive Ack/BA for implicit beamforming. ast_index_valid Indicates that ast_index is valid. Should only be set for receive Ack/BA where single stream implicit sounding is captured. reserved_9 struct phyrx_abort_request_info phyrx_abort_request_info_details Field only valid when Phyrx_abort_request_info_valid is set The reason why PHY generated an abort request struct macrx_abort_request_info macrx_abort_request_info_details Field only valid when macrx_abort_request_info_valid is set The reason why MACRX generated an abort request rx_ppdu_end_marker Field used by SW to double check that their structure alignment is in sync with what HW has done. */ /* Description RXPCU_PPDU_END_INFO_0_WB_TIMESTAMP_LOWER_32 WLAN/BT timestamp is a 1 usec resolution timestamp which does not get updated based on receive beacon like TSF. The same rules for capturing tsf_timestamp are used to capture the wb_timestamp. This field represents the lower 32 bits of the 64-bit timestamp */ #define RXPCU_PPDU_END_INFO_0_WB_TIMESTAMP_LOWER_32_OFFSET 0x00000000 #define RXPCU_PPDU_END_INFO_0_WB_TIMESTAMP_LOWER_32_LSB 0 #define RXPCU_PPDU_END_INFO_0_WB_TIMESTAMP_LOWER_32_MASK 0xffffffff /* Description RXPCU_PPDU_END_INFO_1_WB_TIMESTAMP_UPPER_32 WLAN/BT timestamp is a 1 usec resolution timestamp which does not get updated based on receive beacon like TSF. The same rules for capturing tsf_timestamp are used to capture the wb_timestamp. This field represents the upper 32 bits of the 64-bit timestamp */ #define RXPCU_PPDU_END_INFO_1_WB_TIMESTAMP_UPPER_32_OFFSET 0x00000004 #define RXPCU_PPDU_END_INFO_1_WB_TIMESTAMP_UPPER_32_LSB 0 #define RXPCU_PPDU_END_INFO_1_WB_TIMESTAMP_UPPER_32_MASK 0xffffffff /* Description RXPCU_PPDU_END_INFO_2_RX_ANTENNA Receive antenna value ??? */ #define RXPCU_PPDU_END_INFO_2_RX_ANTENNA_OFFSET 0x00000008 #define RXPCU_PPDU_END_INFO_2_RX_ANTENNA_LSB 0 #define RXPCU_PPDU_END_INFO_2_RX_ANTENNA_MASK 0x00ffffff /* Description RXPCU_PPDU_END_INFO_2_TX_HT_VHT_ACK Indicates that a HT or VHT Ack/BA frame was transmitted in response to this receive packet. */ #define RXPCU_PPDU_END_INFO_2_TX_HT_VHT_ACK_OFFSET 0x00000008 #define RXPCU_PPDU_END_INFO_2_TX_HT_VHT_ACK_LSB 24 #define RXPCU_PPDU_END_INFO_2_TX_HT_VHT_ACK_MASK 0x01000000 /* Description RXPCU_PPDU_END_INFO_2_UNSUPPORTED_MU_NC Set if MU Nc > 2 in received NDPA. If this bit is set, even though AID and BSSID are matched, MAC doesn't send tx_expect_ndp to PHY, because MU Nc > 2 is not supported in Helium. */ #define RXPCU_PPDU_END_INFO_2_UNSUPPORTED_MU_NC_OFFSET 0x00000008 #define RXPCU_PPDU_END_INFO_2_UNSUPPORTED_MU_NC_LSB 25 #define RXPCU_PPDU_END_INFO_2_UNSUPPORTED_MU_NC_MASK 0x02000000 /* Description RXPCU_PPDU_END_INFO_2_OTP_TXBF_DISABLE Set if either OTP_SUBFEE_DISABLE or OTP_TXBF_DISABLE is set and if RXPU receives directed NDPA frame. Then, RXPCU should not send TX_EXPECT_NDP TLV to SW but set this bit to inform SW. */ #define RXPCU_PPDU_END_INFO_2_OTP_TXBF_DISABLE_OFFSET 0x00000008 #define RXPCU_PPDU_END_INFO_2_OTP_TXBF_DISABLE_LSB 26 #define RXPCU_PPDU_END_INFO_2_OTP_TXBF_DISABLE_MASK 0x04000000 /* Description RXPCU_PPDU_END_INFO_2_PREVIOUS_TLV_CORRUPTED When set, the TLV preceding this RXPCU_END_INFO TLV within the RX_PPDU_END TLV, is corrupted. Not the entire TLV was received.... Likely due to an abort scenario... If abort is to blame, see the abort data datastructure for details. */ #define RXPCU_PPDU_END_INFO_2_PREVIOUS_TLV_CORRUPTED_OFFSET 0x00000008 #define RXPCU_PPDU_END_INFO_2_PREVIOUS_TLV_CORRUPTED_LSB 27 #define RXPCU_PPDU_END_INFO_2_PREVIOUS_TLV_CORRUPTED_MASK 0x08000000 /* Description RXPCU_PPDU_END_INFO_2_PHYRX_ABORT_REQUEST_INFO_VALID When set, the PHY sent an PHYRX_ABORT_REQUEST TLV to RXPCU. The abort fields embedded in this TLV contain valid info. */ #define RXPCU_PPDU_END_INFO_2_PHYRX_ABORT_REQUEST_INFO_VALID_OFFSET 0x00000008 #define RXPCU_PPDU_END_INFO_2_PHYRX_ABORT_REQUEST_INFO_VALID_LSB 28 #define RXPCU_PPDU_END_INFO_2_PHYRX_ABORT_REQUEST_INFO_VALID_MASK 0x10000000 /* Description RXPCU_PPDU_END_INFO_2_MACRX_ABORT_REQUEST_INFO_VALID When set, the PHY sent an PHYRX_ABORT_REQUEST TLV to RXPCU. The abort fields embedded in this TLV contain valid info. */ #define RXPCU_PPDU_END_INFO_2_MACRX_ABORT_REQUEST_INFO_VALID_OFFSET 0x00000008 #define RXPCU_PPDU_END_INFO_2_MACRX_ABORT_REQUEST_INFO_VALID_LSB 29 #define RXPCU_PPDU_END_INFO_2_MACRX_ABORT_REQUEST_INFO_VALID_MASK 0x20000000 /* Description RXPCU_PPDU_END_INFO_2_RESERVED */ #define RXPCU_PPDU_END_INFO_2_RESERVED_OFFSET 0x00000008 #define RXPCU_PPDU_END_INFO_2_RESERVED_LSB 30 #define RXPCU_PPDU_END_INFO_2_RESERVED_MASK 0xc0000000 /* Description RXPCU_PPDU_END_INFO_3_COEX_BT_TX_FROM_START_OF_RX Set when BT TX was ongoing when WLAN RX started */ #define RXPCU_PPDU_END_INFO_3_COEX_BT_TX_FROM_START_OF_RX_OFFSET 0x0000000c #define RXPCU_PPDU_END_INFO_3_COEX_BT_TX_FROM_START_OF_RX_LSB 0 #define RXPCU_PPDU_END_INFO_3_COEX_BT_TX_FROM_START_OF_RX_MASK 0x00000001 /* Description RXPCU_PPDU_END_INFO_3_COEX_BT_TX_AFTER_START_OF_RX */ #define RXPCU_PPDU_END_INFO_3_COEX_BT_TX_AFTER_START_OF_RX_OFFSET 0x0000000c #define RXPCU_PPDU_END_INFO_3_COEX_BT_TX_AFTER_START_OF_RX_LSB 1 #define RXPCU_PPDU_END_INFO_3_COEX_BT_TX_AFTER_START_OF_RX_MASK 0x00000002 /* Description RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_FROM_START_OF_RX Set when WAN TX was ongoing when WLAN RX started */ #define RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_FROM_START_OF_RX_OFFSET 0x0000000c #define RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_FROM_START_OF_RX_LSB 2 #define RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_FROM_START_OF_RX_MASK 0x00000004 /* Description RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_AFTER_START_OF_RX Set when WAN TX started while WLAN RX was already ongoing */ #define RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_AFTER_START_OF_RX_OFFSET 0x0000000c #define RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_AFTER_START_OF_RX_LSB 3 #define RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_AFTER_START_OF_RX_MASK 0x00000008 /* Description RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_FROM_START_OF_RX Set when other WLAN TX was ongoing when WLAN RX started */ #define RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_FROM_START_OF_RX_OFFSET 0x0000000c #define RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_FROM_START_OF_RX_LSB 4 #define RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_FROM_START_OF_RX_MASK 0x00000010 /* Description RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_AFTER_START_OF_RX Set when other WLAN TX started while WLAN RX was already ongoing */ #define RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_AFTER_START_OF_RX_OFFSET 0x0000000c #define RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_AFTER_START_OF_RX_LSB 5 #define RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_AFTER_START_OF_RX_MASK 0x00000020 /* Description RXPCU_PPDU_END_INFO_3_MPDU_DELIMITER_ERRORS_SEEN When set, MPDU delimiter errors have been detected during this PPDU reception */ #define RXPCU_PPDU_END_INFO_3_MPDU_DELIMITER_ERRORS_SEEN_OFFSET 0x0000000c #define RXPCU_PPDU_END_INFO_3_MPDU_DELIMITER_ERRORS_SEEN_LSB 6 #define RXPCU_PPDU_END_INFO_3_MPDU_DELIMITER_ERRORS_SEEN_MASK 0x00000040 /* Description RXPCU_PPDU_END_INFO_3_FTM_TM Indicate the timestamp is for the FTM or TM frame 0: non TM or FTM frame 1: FTM frame 2: TM frame 3: reserved */ #define RXPCU_PPDU_END_INFO_3_FTM_TM_OFFSET 0x0000000c #define RXPCU_PPDU_END_INFO_3_FTM_TM_LSB 7 #define RXPCU_PPDU_END_INFO_3_FTM_TM_MASK 0x00000180 /* Description RXPCU_PPDU_END_INFO_3_DIALOG_TOKEN The dialog token in the FTM or TM frame. Only valid when the FTM is set. Clear to 254 for a non-FTM frame */ #define RXPCU_PPDU_END_INFO_3_DIALOG_TOKEN_OFFSET 0x0000000c #define RXPCU_PPDU_END_INFO_3_DIALOG_TOKEN_LSB 9 #define RXPCU_PPDU_END_INFO_3_DIALOG_TOKEN_MASK 0x0001fe00 /* Description RXPCU_PPDU_END_INFO_3_FOLLOW_UP_DIALOG_TOKEN The follow up dialog token in the FTM or TM frame. Only valid when the FTM is set. Clear to 0 for a non-FTM frame, The follow up dialog token in the FTM frame. Only valid when the FTM is set. Clear to 255 for a non-FTM frame */ #define RXPCU_PPDU_END_INFO_3_FOLLOW_UP_DIALOG_TOKEN_OFFSET 0x0000000c #define RXPCU_PPDU_END_INFO_3_FOLLOW_UP_DIALOG_TOKEN_LSB 17 #define RXPCU_PPDU_END_INFO_3_FOLLOW_UP_DIALOG_TOKEN_MASK 0x01fe0000 /* Description RXPCU_PPDU_END_INFO_3_BB_CAPTURED_CHANNEL Set by RXPCU when the following conditions are met: Directed (=> unicast) TM or FTM frame has been received with passing FCS PHYRX_PKT_END. Location_info_valid is set */ #define RXPCU_PPDU_END_INFO_3_BB_CAPTURED_CHANNEL_OFFSET 0x0000000c #define RXPCU_PPDU_END_INFO_3_BB_CAPTURED_CHANNEL_LSB 25 #define RXPCU_PPDU_END_INFO_3_BB_CAPTURED_CHANNEL_MASK 0x02000000 /* Description RXPCU_PPDU_END_INFO_3_RESERVED_3 */ #define RXPCU_PPDU_END_INFO_3_RESERVED_3_OFFSET 0x0000000c #define RXPCU_PPDU_END_INFO_3_RESERVED_3_LSB 26 #define RXPCU_PPDU_END_INFO_3_RESERVED_3_MASK 0xfc000000 /* Description RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_PASSING_FCS Number of MPDUs received in this PPDU that passed the FCS check before the Coex TX started */ #define RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_PASSING_FCS_OFFSET 0x00000010 #define RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_PASSING_FCS_LSB 0 #define RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_PASSING_FCS_MASK 0x000000ff /* Description RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_FAILING_FCS Number of MPDUs received in this PPDU that failed the FCS check before the Coex TX started */ #define RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_FAILING_FCS_OFFSET 0x00000010 #define RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_FAILING_FCS_LSB 8 #define RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_FAILING_FCS_MASK 0x0000ff00 /* Description RXPCU_PPDU_END_INFO_4_AFTER_MPDU_COUNT_PASSING_FCS Number of MPDUs received in this PPDU that passed the FCS check after the moment the Coex TX started (Note: The partially received MPDU when the COEX tx start event came in falls in the after category) */ #define RXPCU_PPDU_END_INFO_4_AFTER_MPDU_COUNT_PASSING_FCS_OFFSET 0x00000010 #define RXPCU_PPDU_END_INFO_4_AFTER_MPDU_COUNT_PASSING_FCS_LSB 16 #define RXPCU_PPDU_END_INFO_4_AFTER_MPDU_COUNT_PASSING_FCS_MASK 0x00ff0000 /* Description RXPCU_PPDU_END_INFO_4_AFTER_MPDU_COUNT_FAILING_FCS Number of MPDUs received in this PPDU that failed the FCS check after the moment the Coex TX started (Note: The partially received MPDU when the COEX tx start event came in falls in the after category) */ #define RXPCU_PPDU_END_INFO_4_AFTER_MPDU_COUNT_FAILING_FCS_OFFSET 0x00000010 #define RXPCU_PPDU_END_INFO_4_AFTER_MPDU_COUNT_FAILING_FCS_LSB 24 #define RXPCU_PPDU_END_INFO_4_AFTER_MPDU_COUNT_FAILING_FCS_MASK 0xff000000 /* Description RXPCU_PPDU_END_INFO_5_PHY_TIMESTAMP_TX_LOWER_32 The PHY timestamp in the AMPI of the most recent rising edge (TODO: of what ???) after the TX_PHY_DESC.  This field indicates the lower 32 bits of the timestamp */ #define RXPCU_PPDU_END_INFO_5_PHY_TIMESTAMP_TX_LOWER_32_OFFSET 0x00000014 #define RXPCU_PPDU_END_INFO_5_PHY_TIMESTAMP_TX_LOWER_32_LSB 0 #define RXPCU_PPDU_END_INFO_5_PHY_TIMESTAMP_TX_LOWER_32_MASK 0xffffffff /* Description RXPCU_PPDU_END_INFO_6_PHY_TIMESTAMP_TX_UPPER_32 The PHY timestamp in the AMPI of the most recent rising edge (TODO: of what ???) after the TX_PHY_DESC.  This field indicates the upper 32 bits of the timestamp */ #define RXPCU_PPDU_END_INFO_6_PHY_TIMESTAMP_TX_UPPER_32_OFFSET 0x00000018 #define RXPCU_PPDU_END_INFO_6_PHY_TIMESTAMP_TX_UPPER_32_LSB 0 #define RXPCU_PPDU_END_INFO_6_PHY_TIMESTAMP_TX_UPPER_32_MASK 0xffffffff /* Description RXPCU_PPDU_END_INFO_7_BB_LENGTH Indicates the number of bytes of baseband information for PPDUs where the BB descriptor preamble type is 0x80 to 0xFF which indicates that this is not a normal PPDU but rather contains baseband debug information. TODO: Is this still needed ??? */ #define RXPCU_PPDU_END_INFO_7_BB_LENGTH_OFFSET 0x0000001c #define RXPCU_PPDU_END_INFO_7_BB_LENGTH_LSB 0 #define RXPCU_PPDU_END_INFO_7_BB_LENGTH_MASK 0x0000ffff /* Description RXPCU_PPDU_END_INFO_7_BB_DATA Indicates that BB data associated with this PPDU will exist in the receive buffer. The exact contents of this BB data can be found by decoding the BB TLV in the buffer associated with the BB data. See vector_fragment in the Helium_mac_phy_interface.docx */ #define RXPCU_PPDU_END_INFO_7_BB_DATA_OFFSET 0x0000001c #define RXPCU_PPDU_END_INFO_7_BB_DATA_LSB 16 #define RXPCU_PPDU_END_INFO_7_BB_DATA_MASK 0x00010000 /* Description RXPCU_PPDU_END_INFO_7_RESERVED_7 Reserved: HW should fill with 0, FW should ignore. */ #define RXPCU_PPDU_END_INFO_7_RESERVED_7_OFFSET 0x0000001c #define RXPCU_PPDU_END_INFO_7_RESERVED_7_LSB 17 #define RXPCU_PPDU_END_INFO_7_RESERVED_7_MASK 0xfffe0000 /* Description RXPCU_PPDU_END_INFO_8_RX_PPDU_DURATION The length of this PPDU reception in us */ #define RXPCU_PPDU_END_INFO_8_RX_PPDU_DURATION_OFFSET 0x00000020 #define RXPCU_PPDU_END_INFO_8_RX_PPDU_DURATION_LSB 0 #define RXPCU_PPDU_END_INFO_8_RX_PPDU_DURATION_MASK 0x00ffffff /* Description RXPCU_PPDU_END_INFO_8_RESERVED_8 */ #define RXPCU_PPDU_END_INFO_8_RESERVED_8_OFFSET 0x00000020 #define RXPCU_PPDU_END_INFO_8_RESERVED_8_LSB 24 #define RXPCU_PPDU_END_INFO_8_RESERVED_8_MASK 0xff000000 /* Description RXPCU_PPDU_END_INFO_9_AST_INDEX The AST index of the receive Ack/BA. This information is provided from the TXPCU to the RXPCU for receive Ack/BA for implicit beamforming. */ #define RXPCU_PPDU_END_INFO_9_AST_INDEX_OFFSET 0x00000024 #define RXPCU_PPDU_END_INFO_9_AST_INDEX_LSB 0 #define RXPCU_PPDU_END_INFO_9_AST_INDEX_MASK 0x0000ffff /* Description RXPCU_PPDU_END_INFO_9_AST_INDEX_VALID Indicates that ast_index is valid. Should only be set for receive Ack/BA where single stream implicit sounding is captured. */ #define RXPCU_PPDU_END_INFO_9_AST_INDEX_VALID_OFFSET 0x00000024 #define RXPCU_PPDU_END_INFO_9_AST_INDEX_VALID_LSB 16 #define RXPCU_PPDU_END_INFO_9_AST_INDEX_VALID_MASK 0x00010000 /* Description RXPCU_PPDU_END_INFO_9_RESERVED_9 */ #define RXPCU_PPDU_END_INFO_9_RESERVED_9_OFFSET 0x00000024 #define RXPCU_PPDU_END_INFO_9_RESERVED_9_LSB 17 #define RXPCU_PPDU_END_INFO_9_RESERVED_9_MASK 0xfffe0000 #define RXPCU_PPDU_END_INFO_10_PHYRX_ABORT_REQUEST_INFO_PHYRX_ABORT_REQUEST_INFO_DETAILS_OFFSET 0x00000028 #define RXPCU_PPDU_END_INFO_10_PHYRX_ABORT_REQUEST_INFO_PHYRX_ABORT_REQUEST_INFO_DETAILS_LSB 17 #define RXPCU_PPDU_END_INFO_10_PHYRX_ABORT_REQUEST_INFO_PHYRX_ABORT_REQUEST_INFO_DETAILS_MASK 0xffffffff #define RXPCU_PPDU_END_INFO_11_MACRX_ABORT_REQUEST_INFO_MACRX_ABORT_REQUEST_INFO_DETAILS_OFFSET 0x0000002c #define RXPCU_PPDU_END_INFO_11_MACRX_ABORT_REQUEST_INFO_MACRX_ABORT_REQUEST_INFO_DETAILS_LSB 17 #define RXPCU_PPDU_END_INFO_11_MACRX_ABORT_REQUEST_INFO_MACRX_ABORT_REQUEST_INFO_DETAILS_MASK 0xffffffff /* Description RXPCU_PPDU_END_INFO_12_RX_PPDU_END_MARKER Field used by SW to double check that their structure alignment is in sync with what HW has done. */ #define RXPCU_PPDU_END_INFO_12_RX_PPDU_END_MARKER_OFFSET 0x00000030 #define RXPCU_PPDU_END_INFO_12_RX_PPDU_END_MARKER_LSB 0 #define RXPCU_PPDU_END_INFO_12_RX_PPDU_END_MARKER_MASK 0xffffffff #endif // _RXPCU_PPDU_END_INFO_H_