/* * Copyright (c) 2019 The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for * any purpose with or without fee is hereby granted, provided that the * above copyright notice and this permission notice appear in all * copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR * PERFORMANCE OF THIS SOFTWARE. */ // // DO NOT EDIT! This file is automatically generated // These definitions are tied to a particular hardware layout #ifndef _RX_REO_QUEUE_H_ #define _RX_REO_QUEUE_H_ #if !defined(__ASSEMBLER__) #endif #include "uniform_descriptor_header.h" // ################ START SUMMARY ################# // // Dword Fields // 0 struct uniform_descriptor_header descriptor_header; // 1 receive_queue_number[15:0], reserved_1b[31:16] // 2 vld[0], associated_link_descriptor_counter[2:1], disable_duplicate_detection[3], soft_reorder_enable[4], ac[6:5], bar[7], rty[8], chk_2k_mode[9], oor_mode[10], ba_window_size[18:11], pn_check_needed[19], pn_shall_be_even[20], pn_shall_be_uneven[21], pn_handling_enable[22], pn_size[24:23], ignore_ampdu_flag[25], reserved_2b[31:26] // 3 svld[0], ssn[12:1], current_index[20:13], seq_2k_error_detected_flag[21], pn_error_detected_flag[22], reserved_3a[30:23], pn_valid[31] // 4 pn_31_0[31:0] // 5 pn_63_32[31:0] // 6 pn_95_64[31:0] // 7 pn_127_96[31:0] // 8 last_rx_enqueue_timestamp[31:0] // 9 last_rx_dequeue_timestamp[31:0] // 10 ptr_to_next_aging_queue_31_0[31:0] // 11 ptr_to_next_aging_queue_39_32[7:0], reserved_11a[31:8] // 12 ptr_to_previous_aging_queue_31_0[31:0] // 13 ptr_to_previous_aging_queue_39_32[7:0], reserved_13a[31:8] // 14 rx_bitmap_31_0[31:0] // 15 rx_bitmap_63_32[31:0] // 16 rx_bitmap_95_64[31:0] // 17 rx_bitmap_127_96[31:0] // 18 rx_bitmap_159_128[31:0] // 19 rx_bitmap_191_160[31:0] // 20 rx_bitmap_223_192[31:0] // 21 rx_bitmap_255_224[31:0] // 22 current_mpdu_count[6:0], current_msdu_count[31:7] // 23 reserved_23[3:0], timeout_count[9:4], forward_due_to_bar_count[15:10], duplicate_count[31:16] // 24 frames_in_order_count[23:0], bar_received_count[31:24] // 25 mpdu_frames_processed_count[31:0] // 26 msdu_frames_processed_count[31:0] // 27 total_processed_byte_count[31:0] // 28 late_receive_mpdu_count[11:0], window_jump_2k[15:12], hole_count[31:16] // 29 reserved_29[31:0] // 30 reserved_30[31:0] // 31 reserved_31[31:0] // // ################ END SUMMARY ################# #define NUM_OF_DWORDS_RX_REO_QUEUE 32 struct rx_reo_queue { struct uniform_descriptor_header descriptor_header; uint32_t receive_queue_number : 16, //[15:0] reserved_1b : 16; //[31:16] uint32_t vld : 1, //[0] associated_link_descriptor_counter: 2, //[2:1] disable_duplicate_detection : 1, //[3] soft_reorder_enable : 1, //[4] ac : 2, //[6:5] bar : 1, //[7] rty : 1, //[8] chk_2k_mode : 1, //[9] oor_mode : 1, //[10] ba_window_size : 8, //[18:11] pn_check_needed : 1, //[19] pn_shall_be_even : 1, //[20] pn_shall_be_uneven : 1, //[21] pn_handling_enable : 1, //[22] pn_size : 2, //[24:23] ignore_ampdu_flag : 1, //[25] reserved_2b : 6; //[31:26] uint32_t svld : 1, //[0] ssn : 12, //[12:1] current_index : 8, //[20:13] seq_2k_error_detected_flag : 1, //[21] pn_error_detected_flag : 1, //[22] reserved_3a : 8, //[30:23] pn_valid : 1; //[31] uint32_t pn_31_0 : 32; //[31:0] uint32_t pn_63_32 : 32; //[31:0] uint32_t pn_95_64 : 32; //[31:0] uint32_t pn_127_96 : 32; //[31:0] uint32_t last_rx_enqueue_timestamp : 32; //[31:0] uint32_t last_rx_dequeue_timestamp : 32; //[31:0] uint32_t ptr_to_next_aging_queue_31_0 : 32; //[31:0] uint32_t ptr_to_next_aging_queue_39_32 : 8, //[7:0] reserved_11a : 24; //[31:8] uint32_t ptr_to_previous_aging_queue_31_0: 32; //[31:0] uint32_t ptr_to_previous_aging_queue_39_32: 8, //[7:0] reserved_13a : 24; //[31:8] uint32_t rx_bitmap_31_0 : 32; //[31:0] uint32_t rx_bitmap_63_32 : 32; //[31:0] uint32_t rx_bitmap_95_64 : 32; //[31:0] uint32_t rx_bitmap_127_96 : 32; //[31:0] uint32_t rx_bitmap_159_128 : 32; //[31:0] uint32_t rx_bitmap_191_160 : 32; //[31:0] uint32_t rx_bitmap_223_192 : 32; //[31:0] uint32_t rx_bitmap_255_224 : 32; //[31:0] uint32_t current_mpdu_count : 7, //[6:0] current_msdu_count : 25; //[31:7] uint32_t reserved_23 : 4, //[3:0] timeout_count : 6, //[9:4] forward_due_to_bar_count : 6, //[15:10] duplicate_count : 16; //[31:16] uint32_t frames_in_order_count : 24, //[23:0] bar_received_count : 8; //[31:24] uint32_t mpdu_frames_processed_count : 32; //[31:0] uint32_t msdu_frames_processed_count : 32; //[31:0] uint32_t total_processed_byte_count : 32; //[31:0] uint32_t late_receive_mpdu_count : 12, //[11:0] window_jump_2k : 4, //[15:12] hole_count : 16; //[31:16] uint32_t reserved_29 : 32; //[31:0] uint32_t reserved_30 : 32; //[31:0] uint32_t reserved_31 : 32; //[31:0] }; /* struct uniform_descriptor_header descriptor_header Details about which module owns this struct. Note that sub field Buffer_type shall be set to Receive_REO_queue_descriptor receive_queue_number Indicates the MPDU queue ID to which this MPDU link descriptor belongs Used for tracking and debugging reserved_1b vld Valid bit indicating a session is established and the queue descriptor is valid(Filled by SW) associated_link_descriptor_counter Indicates which of the 3 link descriptor counters shall be incremented or decremented when link descriptors are added or removed from this flow queue. MSDU link descriptors related with MPDUs stored in the re-order buffer shall also be included in this count. disable_duplicate_detection When set, do not perform any duplicate detection. soft_reorder_enable When set, REO has been instructed to not perform the actual re-ordering of frames for this queue, but just to insert the reorder opcodes. Note that this implies that REO is also not going to perform any MSDU level operations, and the entire MPDU (and thus pointer to the MSDU link descriptor) will be pushed to a destination ring that SW has programmed in a SW programmable configuration register in REO ac Indicates which access category the queue descriptor belongs to(filled by SW) bar Indicates if BAR has been received (mostly used for debug purpose and this is filled by REO) rty Retry bit is checked if this bit is set. chk_2k_mode Indicates what type of operation is expected from Reo when the received frame SN falls within the 2K window See REO MLD document for programming details. oor_mode Out of Order mode: Indicates what type of operation is expected when the received frame falls within the OOR window. See REO MLD document for programming details. ba_window_size Indicates the negotiated (window size + 1). It can go up to Max of 256bits. A value 255 means 256 bitmap, 63 means 64 bitmap, 0 (means non-BA session, with window size of 0). The 3 values here are the main values validated, but other values should work as well. A BA window size of 0 (=> one frame entry bitmat), means that there is NO RX_REO_QUEUE_EXT descriptor following this RX_REO_QUEUE STRUCT in memory A BA window size of 1 - 105, means that there is 1 RX_REO_QUEUE_EXT descriptor directly following this RX_REO_QUEUE STRUCT in memory. A BA window size of 106 - 210, means that there are 2 RX_REO_QUEUE_EXT descriptors directly following this RX_REO_QUEUE STRUCT in memory A BA window size of 211 - 256, means that there are 3 RX_REO_QUEUE_EXT descriptors directly following this RX_REO_QUEUE STRUCT in memory pn_check_needed When set, REO shall perform the PN increment check pn_shall_be_even Field only valid when 'pn_check_needed' is set. When set, REO shall confirm that the received PN number is not only incremented, but also always an even number pn_shall_be_uneven Field only valid when 'pn_check_needed' is set. When set, REO shall confirm that the received PN number is not only incremented, but also always an uneven number pn_handling_enable Field only valid when 'pn_check_needed' is set. When set, and REO detected a PN error, HW shall set the 'pn_error_detected_flag'. pn_size Size of the PN field check. Needed for wrap around handling... ignore_ampdu_flag When set, REO shall ignore the ampdu_flag on the entrance descriptor for this queue. reserved_2b svld Sequence number in next field is valid one. It can be filled by SW if the want to fill in the any negotiated SSN, otherwise REO will fill the sequence number of first received packet and set this bit to 1. ssn Starting Sequence number of the session, this changes whenever window moves. (can be filled by SW then maintained by REO) current_index Points to last forwarded packet seq_2k_error_detected_flag Set by REO, can only be cleared by SW When set, REO has detected a 2k error jump in the sequence number and from that moment forward, all new frames are forwarded directly to FW, without duplicate detect, reordering, etc. pn_error_detected_flag Set by REO, can only be cleared by SW When set, REO has detected a PN error and from that moment forward, all new frames are forwarded directly to FW, without duplicate detect, reordering, etc. reserved_3a pn_valid PN number in next fields are valid. It can be filled by SW if it wants to fill in the any negotiated SSN, otherwise REO will fill the pn based on the first received packet and set this bit to 1. pn_31_0 pn_63_32 Bits [63:32] of the PN number. pn_95_64 Bits [95:64] of the PN number. pn_127_96 Bits [127:96] of the PN number. last_rx_enqueue_timestamp This timestamp is updated when an MPDU is received and accesses this Queue Descriptor. It does not include the access due to Command TLVs or Aging (which will be updated in Last_rx_dequeue_timestamp). last_rx_dequeue_timestamp This timestamp is used for Aging. When an MPDU or multiple MPDUs are forwarded, either due to window movement, bar, aging or command flush, this timestamp is updated. Also when the bitmap is all zero and the first time an MPDU is queued (opcode=QCUR), this timestamp is updated for aging. ptr_to_next_aging_queue_31_0 Address (address bits 31-0)of next RX_REO_QUEUE descriptor in the 'receive timestamp' ordered list. From it the Position of this queue descriptor in the per AC aging waitlist can be derived. Value 0x0 indicates the 'NULL' pointer which implies that this is the last entry in the list. ptr_to_next_aging_queue_39_32 Address (address bits 39-32)of next RX_REO_QUEUE descriptor in the 'receive timestamp' ordered list. From it the Position of this queue descriptor in the per AC aging waitlist can be derived. Value 0x0 indicates the 'NULL' pointer which implies that this is the last entry in the list. reserved_11a ptr_to_previous_aging_queue_31_0 Address (address bits 31-0)of next RX_REO_QUEUE descriptor in the 'receive timestamp' ordered list. From it the Position of this queue descriptor in the per AC aging waitlist can be derived. Value 0x0 indicates the 'NULL' pointer which implies that this is the first entry in the list. ptr_to_previous_aging_queue_39_32 Address (address bits 39-32)of next RX_REO_QUEUE descriptor in the 'receive timestamp' ordered list. From it the Position of this queue descriptor in the per AC aging waitlist can be derived. Value 0x0 indicates the 'NULL' pointer which implies that this is the first entry in the list. reserved_13a rx_bitmap_31_0 When a bit is set, the corresponding frame is currently held in the re-order queue. The bitmap is Fully managed by HW. SW shall init this to 0, and then never ever change it rx_bitmap_63_32 See Rx_bitmap_31_0 description rx_bitmap_95_64 See Rx_bitmap_31_0 description rx_bitmap_127_96 See Rx_bitmap_31_0 description rx_bitmap_159_128 See Rx_bitmap_31_0 description rx_bitmap_191_160 See Rx_bitmap_31_0 description rx_bitmap_223_192 See Rx_bitmap_31_0 description rx_bitmap_255_224 See Rx_bitmap_31_0 description current_mpdu_count The number of MPDUs in the queue. current_msdu_count The number of MSDUs in the queue. reserved_23 timeout_count The number of times that REO started forwarding frames even though there is a hole in the bitmap. Forwarding reason is Timeout The counter saturates and freezes at 0x3F forward_due_to_bar_count The number of times that REO started forwarding frames even though there is a hole in the bitmap. Forwarding reason is reception of BAR frame. The counter saturates and freezes at 0x3F duplicate_count The number of duplicate frames that have been detected frames_in_order_count The number of frames that have been received in order (without a hole that prevented them from being forwarded immediately) This corresponds to the Reorder opcodes: 'FWDCUR' and 'FWD BUF' bar_received_count The number of times a BAR frame is received. This corresponds to the Reorder opcodes with 'DROP' The counter saturates and freezes at 0xFF mpdu_frames_processed_count The total number of MPDU frames that have been processed by REO. 'Processing' here means that REO has received them out of the entrance ring, and retrieved the corresponding RX_REO_QUEUE Descriptor. Note that this count includes duplicates, frames that later had errors, etc. Note that field 'Duplicate_count' indicates how many of these MPDUs were duplicates. msdu_frames_processed_count The total number of MSDU frames that have been processed by REO. 'Processing' here means that REO has received them out of the entrance ring, and retrieved the corresponding RX_REO_QUEUE Descriptor. Note that this count includes duplicates, frames that later had errors, etc. total_processed_byte_count An approximation of the number of bytes processed for this queue. 'Processing' here means that REO has received them out of the entrance ring, and retrieved the corresponding RX_REO_QUEUE Descriptor. Note that this count includes duplicates, frames that later had errors, etc. In 64 byte units late_receive_mpdu_count The number of MPDUs received after the window had already moved on. The 'late' sequence window is defined as (Window SSN - 256) - (Window SSN - 1) This corresponds with Out of order detection in duplicate detect FSM The counter saturates and freezes at 0xFFF window_jump_2k The number of times the window moved more then 2K The counter saturates and freezes at 0xF (Note: field name can not start with number: previous 2k_window_jump) hole_count The number of times a hole was created in the receive bitmap. This corresponds to the Reorder opcodes with 'QCUR' reserved_29 reserved_30 reserved_31 */ /* EXTERNAL REFERENCE : struct uniform_descriptor_header descriptor_header */ /* Description RX_REO_QUEUE_0_DESCRIPTOR_HEADER_OWNER Consumer: In DEBUG mode: WBM, TQM, TXDMA, RXDMA, REO Producer: In DEBUG mode: WBM, TQM, TXDMA, RXDMA, REO The owner of this data structure: Buffer Manager currently owns this data structure. Software of FW currently owns this data structure. Transmit Queue Manager currently owns this data structure. Receive DMA currently owns this data structure. Reorder currently owns this data structure. SWITCH currently owns this data structure. */ #define RX_REO_QUEUE_0_DESCRIPTOR_HEADER_OWNER_OFFSET 0x00000000 #define RX_REO_QUEUE_0_DESCRIPTOR_HEADER_OWNER_LSB 0 #define RX_REO_QUEUE_0_DESCRIPTOR_HEADER_OWNER_MASK 0x0000000f /* Description RX_REO_QUEUE_0_DESCRIPTOR_HEADER_BUFFER_TYPE Consumer: In DEBUG mode: WBM, TQM, TXDMA, RXDMA, REO Producer: In DEBUG mode: WBM, TQM, TXDMA, RXDMA, REO Field describing what contents format is of this descriptor NOT TO BE USED: */ #define RX_REO_QUEUE_0_DESCRIPTOR_HEADER_BUFFER_TYPE_OFFSET 0x00000000 #define RX_REO_QUEUE_0_DESCRIPTOR_HEADER_BUFFER_TYPE_LSB 4 #define RX_REO_QUEUE_0_DESCRIPTOR_HEADER_BUFFER_TYPE_MASK 0x000000f0 /* Description RX_REO_QUEUE_0_DESCRIPTOR_HEADER_RESERVED_0A */ #define RX_REO_QUEUE_0_DESCRIPTOR_HEADER_RESERVED_0A_OFFSET 0x00000000 #define RX_REO_QUEUE_0_DESCRIPTOR_HEADER_RESERVED_0A_LSB 8 #define RX_REO_QUEUE_0_DESCRIPTOR_HEADER_RESERVED_0A_MASK 0xffffff00 /* Description RX_REO_QUEUE_1_RECEIVE_QUEUE_NUMBER Indicates the MPDU queue ID to which this MPDU link descriptor belongs Used for tracking and debugging */ #define RX_REO_QUEUE_1_RECEIVE_QUEUE_NUMBER_OFFSET 0x00000004 #define RX_REO_QUEUE_1_RECEIVE_QUEUE_NUMBER_LSB 0 #define RX_REO_QUEUE_1_RECEIVE_QUEUE_NUMBER_MASK 0x0000ffff /* Description RX_REO_QUEUE_1_RESERVED_1B */ #define RX_REO_QUEUE_1_RESERVED_1B_OFFSET 0x00000004 #define RX_REO_QUEUE_1_RESERVED_1B_LSB 16 #define RX_REO_QUEUE_1_RESERVED_1B_MASK 0xffff0000 /* Description RX_REO_QUEUE_2_VLD Valid bit indicating a session is established and the queue descriptor is valid(Filled by SW) */ #define RX_REO_QUEUE_2_VLD_OFFSET 0x00000008 #define RX_REO_QUEUE_2_VLD_LSB 0 #define RX_REO_QUEUE_2_VLD_MASK 0x00000001 /* Description RX_REO_QUEUE_2_ASSOCIATED_LINK_DESCRIPTOR_COUNTER Indicates which of the 3 link descriptor counters shall be incremented or decremented when link descriptors are added or removed from this flow queue. MSDU link descriptors related with MPDUs stored in the re-order buffer shall also be included in this count. */ #define RX_REO_QUEUE_2_ASSOCIATED_LINK_DESCRIPTOR_COUNTER_OFFSET 0x00000008 #define RX_REO_QUEUE_2_ASSOCIATED_LINK_DESCRIPTOR_COUNTER_LSB 1 #define RX_REO_QUEUE_2_ASSOCIATED_LINK_DESCRIPTOR_COUNTER_MASK 0x00000006 /* Description RX_REO_QUEUE_2_DISABLE_DUPLICATE_DETECTION When set, do not perform any duplicate detection. */ #define RX_REO_QUEUE_2_DISABLE_DUPLICATE_DETECTION_OFFSET 0x00000008 #define RX_REO_QUEUE_2_DISABLE_DUPLICATE_DETECTION_LSB 3 #define RX_REO_QUEUE_2_DISABLE_DUPLICATE_DETECTION_MASK 0x00000008 /* Description RX_REO_QUEUE_2_SOFT_REORDER_ENABLE When set, REO has been instructed to not perform the actual re-ordering of frames for this queue, but just to insert the reorder opcodes. Note that this implies that REO is also not going to perform any MSDU level operations, and the entire MPDU (and thus pointer to the MSDU link descriptor) will be pushed to a destination ring that SW has programmed in a SW programmable configuration register in REO */ #define RX_REO_QUEUE_2_SOFT_REORDER_ENABLE_OFFSET 0x00000008 #define RX_REO_QUEUE_2_SOFT_REORDER_ENABLE_LSB 4 #define RX_REO_QUEUE_2_SOFT_REORDER_ENABLE_MASK 0x00000010 /* Description RX_REO_QUEUE_2_AC Indicates which access category the queue descriptor belongs to(filled by SW) */ #define RX_REO_QUEUE_2_AC_OFFSET 0x00000008 #define RX_REO_QUEUE_2_AC_LSB 5 #define RX_REO_QUEUE_2_AC_MASK 0x00000060 /* Description RX_REO_QUEUE_2_BAR Indicates if BAR has been received (mostly used for debug purpose and this is filled by REO) */ #define RX_REO_QUEUE_2_BAR_OFFSET 0x00000008 #define RX_REO_QUEUE_2_BAR_LSB 7 #define RX_REO_QUEUE_2_BAR_MASK 0x00000080 /* Description RX_REO_QUEUE_2_RTY Retry bit is checked if this bit is set. */ #define RX_REO_QUEUE_2_RTY_OFFSET 0x00000008 #define RX_REO_QUEUE_2_RTY_LSB 8 #define RX_REO_QUEUE_2_RTY_MASK 0x00000100 /* Description RX_REO_QUEUE_2_CHK_2K_MODE Indicates what type of operation is expected from Reo when the received frame SN falls within the 2K window See REO MLD document for programming details. */ #define RX_REO_QUEUE_2_CHK_2K_MODE_OFFSET 0x00000008 #define RX_REO_QUEUE_2_CHK_2K_MODE_LSB 9 #define RX_REO_QUEUE_2_CHK_2K_MODE_MASK 0x00000200 /* Description RX_REO_QUEUE_2_OOR_MODE Out of Order mode: Indicates what type of operation is expected when the received frame falls within the OOR window. See REO MLD document for programming details. */ #define RX_REO_QUEUE_2_OOR_MODE_OFFSET 0x00000008 #define RX_REO_QUEUE_2_OOR_MODE_LSB 10 #define RX_REO_QUEUE_2_OOR_MODE_MASK 0x00000400 /* Description RX_REO_QUEUE_2_BA_WINDOW_SIZE Indicates the negotiated (window size + 1). It can go up to Max of 256bits. A value 255 means 256 bitmap, 63 means 64 bitmap, 0 (means non-BA session, with window size of 0). The 3 values here are the main values validated, but other values should work as well. A BA window size of 0 (=> one frame entry bitmat), means that there is NO RX_REO_QUEUE_EXT descriptor following this RX_REO_QUEUE STRUCT in memory A BA window size of 1 - 105, means that there is 1 RX_REO_QUEUE_EXT descriptor directly following this RX_REO_QUEUE STRUCT in memory. A BA window size of 106 - 210, means that there are 2 RX_REO_QUEUE_EXT descriptors directly following this RX_REO_QUEUE STRUCT in memory A BA window size of 211 - 256, means that there are 3 RX_REO_QUEUE_EXT descriptors directly following this RX_REO_QUEUE STRUCT in memory */ #define RX_REO_QUEUE_2_BA_WINDOW_SIZE_OFFSET 0x00000008 #define RX_REO_QUEUE_2_BA_WINDOW_SIZE_LSB 11 #define RX_REO_QUEUE_2_BA_WINDOW_SIZE_MASK 0x0007f800 /* Description RX_REO_QUEUE_2_PN_CHECK_NEEDED When set, REO shall perform the PN increment check */ #define RX_REO_QUEUE_2_PN_CHECK_NEEDED_OFFSET 0x00000008 #define RX_REO_QUEUE_2_PN_CHECK_NEEDED_LSB 19 #define RX_REO_QUEUE_2_PN_CHECK_NEEDED_MASK 0x00080000 /* Description RX_REO_QUEUE_2_PN_SHALL_BE_EVEN Field only valid when 'pn_check_needed' is set. When set, REO shall confirm that the received PN number is not only incremented, but also always an even number */ #define RX_REO_QUEUE_2_PN_SHALL_BE_EVEN_OFFSET 0x00000008 #define RX_REO_QUEUE_2_PN_SHALL_BE_EVEN_LSB 20 #define RX_REO_QUEUE_2_PN_SHALL_BE_EVEN_MASK 0x00100000 /* Description RX_REO_QUEUE_2_PN_SHALL_BE_UNEVEN Field only valid when 'pn_check_needed' is set. When set, REO shall confirm that the received PN number is not only incremented, but also always an uneven number */ #define RX_REO_QUEUE_2_PN_SHALL_BE_UNEVEN_OFFSET 0x00000008 #define RX_REO_QUEUE_2_PN_SHALL_BE_UNEVEN_LSB 21 #define RX_REO_QUEUE_2_PN_SHALL_BE_UNEVEN_MASK 0x00200000 /* Description RX_REO_QUEUE_2_PN_HANDLING_ENABLE Field only valid when 'pn_check_needed' is set. When set, and REO detected a PN error, HW shall set the 'pn_error_detected_flag'. */ #define RX_REO_QUEUE_2_PN_HANDLING_ENABLE_OFFSET 0x00000008 #define RX_REO_QUEUE_2_PN_HANDLING_ENABLE_LSB 22 #define RX_REO_QUEUE_2_PN_HANDLING_ENABLE_MASK 0x00400000 /* Description RX_REO_QUEUE_2_PN_SIZE Size of the PN field check. Needed for wrap around handling... */ #define RX_REO_QUEUE_2_PN_SIZE_OFFSET 0x00000008 #define RX_REO_QUEUE_2_PN_SIZE_LSB 23 #define RX_REO_QUEUE_2_PN_SIZE_MASK 0x01800000 /* Description RX_REO_QUEUE_2_IGNORE_AMPDU_FLAG When set, REO shall ignore the ampdu_flag on the entrance descriptor for this queue. */ #define RX_REO_QUEUE_2_IGNORE_AMPDU_FLAG_OFFSET 0x00000008 #define RX_REO_QUEUE_2_IGNORE_AMPDU_FLAG_LSB 25 #define RX_REO_QUEUE_2_IGNORE_AMPDU_FLAG_MASK 0x02000000 /* Description RX_REO_QUEUE_2_RESERVED_2B */ #define RX_REO_QUEUE_2_RESERVED_2B_OFFSET 0x00000008 #define RX_REO_QUEUE_2_RESERVED_2B_LSB 26 #define RX_REO_QUEUE_2_RESERVED_2B_MASK 0xfc000000 /* Description RX_REO_QUEUE_3_SVLD Sequence number in next field is valid one. It can be filled by SW if the want to fill in the any negotiated SSN, otherwise REO will fill the sequence number of first received packet and set this bit to 1. */ #define RX_REO_QUEUE_3_SVLD_OFFSET 0x0000000c #define RX_REO_QUEUE_3_SVLD_LSB 0 #define RX_REO_QUEUE_3_SVLD_MASK 0x00000001 /* Description RX_REO_QUEUE_3_SSN Starting Sequence number of the session, this changes whenever window moves. (can be filled by SW then maintained by REO) */ #define RX_REO_QUEUE_3_SSN_OFFSET 0x0000000c #define RX_REO_QUEUE_3_SSN_LSB 1 #define RX_REO_QUEUE_3_SSN_MASK 0x00001ffe /* Description RX_REO_QUEUE_3_CURRENT_INDEX Points to last forwarded packet */ #define RX_REO_QUEUE_3_CURRENT_INDEX_OFFSET 0x0000000c #define RX_REO_QUEUE_3_CURRENT_INDEX_LSB 13 #define RX_REO_QUEUE_3_CURRENT_INDEX_MASK 0x001fe000 /* Description RX_REO_QUEUE_3_SEQ_2K_ERROR_DETECTED_FLAG Set by REO, can only be cleared by SW When set, REO has detected a 2k error jump in the sequence number and from that moment forward, all new frames are forwarded directly to FW, without duplicate detect, reordering, etc. */ #define RX_REO_QUEUE_3_SEQ_2K_ERROR_DETECTED_FLAG_OFFSET 0x0000000c #define RX_REO_QUEUE_3_SEQ_2K_ERROR_DETECTED_FLAG_LSB 21 #define RX_REO_QUEUE_3_SEQ_2K_ERROR_DETECTED_FLAG_MASK 0x00200000 /* Description RX_REO_QUEUE_3_PN_ERROR_DETECTED_FLAG Set by REO, can only be cleared by SW When set, REO has detected a PN error and from that moment forward, all new frames are forwarded directly to FW, without duplicate detect, reordering, etc. */ #define RX_REO_QUEUE_3_PN_ERROR_DETECTED_FLAG_OFFSET 0x0000000c #define RX_REO_QUEUE_3_PN_ERROR_DETECTED_FLAG_LSB 22 #define RX_REO_QUEUE_3_PN_ERROR_DETECTED_FLAG_MASK 0x00400000 /* Description RX_REO_QUEUE_3_RESERVED_3A */ #define RX_REO_QUEUE_3_RESERVED_3A_OFFSET 0x0000000c #define RX_REO_QUEUE_3_RESERVED_3A_LSB 23 #define RX_REO_QUEUE_3_RESERVED_3A_MASK 0x7f800000 /* Description RX_REO_QUEUE_3_PN_VALID PN number in next fields are valid. It can be filled by SW if it wants to fill in the any negotiated SSN, otherwise REO will fill the pn based on the first received packet and set this bit to 1. */ #define RX_REO_QUEUE_3_PN_VALID_OFFSET 0x0000000c #define RX_REO_QUEUE_3_PN_VALID_LSB 31 #define RX_REO_QUEUE_3_PN_VALID_MASK 0x80000000 /* Description RX_REO_QUEUE_4_PN_31_0 */ #define RX_REO_QUEUE_4_PN_31_0_OFFSET 0x00000010 #define RX_REO_QUEUE_4_PN_31_0_LSB 0 #define RX_REO_QUEUE_4_PN_31_0_MASK 0xffffffff /* Description RX_REO_QUEUE_5_PN_63_32 Bits [63:32] of the PN number. */ #define RX_REO_QUEUE_5_PN_63_32_OFFSET 0x00000014 #define RX_REO_QUEUE_5_PN_63_32_LSB 0 #define RX_REO_QUEUE_5_PN_63_32_MASK 0xffffffff /* Description RX_REO_QUEUE_6_PN_95_64 Bits [95:64] of the PN number. */ #define RX_REO_QUEUE_6_PN_95_64_OFFSET 0x00000018 #define RX_REO_QUEUE_6_PN_95_64_LSB 0 #define RX_REO_QUEUE_6_PN_95_64_MASK 0xffffffff /* Description RX_REO_QUEUE_7_PN_127_96 Bits [127:96] of the PN number. */ #define RX_REO_QUEUE_7_PN_127_96_OFFSET 0x0000001c #define RX_REO_QUEUE_7_PN_127_96_LSB 0 #define RX_REO_QUEUE_7_PN_127_96_MASK 0xffffffff /* Description RX_REO_QUEUE_8_LAST_RX_ENQUEUE_TIMESTAMP This timestamp is updated when an MPDU is received and accesses this Queue Descriptor. It does not include the access due to Command TLVs or Aging (which will be updated in Last_rx_dequeue_timestamp). */ #define RX_REO_QUEUE_8_LAST_RX_ENQUEUE_TIMESTAMP_OFFSET 0x00000020 #define RX_REO_QUEUE_8_LAST_RX_ENQUEUE_TIMESTAMP_LSB 0 #define RX_REO_QUEUE_8_LAST_RX_ENQUEUE_TIMESTAMP_MASK 0xffffffff /* Description RX_REO_QUEUE_9_LAST_RX_DEQUEUE_TIMESTAMP This timestamp is used for Aging. When an MPDU or multiple MPDUs are forwarded, either due to window movement, bar, aging or command flush, this timestamp is updated. Also when the bitmap is all zero and the first time an MPDU is queued (opcode=QCUR), this timestamp is updated for aging. */ #define RX_REO_QUEUE_9_LAST_RX_DEQUEUE_TIMESTAMP_OFFSET 0x00000024 #define RX_REO_QUEUE_9_LAST_RX_DEQUEUE_TIMESTAMP_LSB 0 #define RX_REO_QUEUE_9_LAST_RX_DEQUEUE_TIMESTAMP_MASK 0xffffffff /* Description RX_REO_QUEUE_10_PTR_TO_NEXT_AGING_QUEUE_31_0 Address (address bits 31-0)of next RX_REO_QUEUE descriptor in the 'receive timestamp' ordered list. From it the Position of this queue descriptor in the per AC aging waitlist can be derived. Value 0x0 indicates the 'NULL' pointer which implies that this is the last entry in the list. */ #define RX_REO_QUEUE_10_PTR_TO_NEXT_AGING_QUEUE_31_0_OFFSET 0x00000028 #define RX_REO_QUEUE_10_PTR_TO_NEXT_AGING_QUEUE_31_0_LSB 0 #define RX_REO_QUEUE_10_PTR_TO_NEXT_AGING_QUEUE_31_0_MASK 0xffffffff /* Description RX_REO_QUEUE_11_PTR_TO_NEXT_AGING_QUEUE_39_32 Address (address bits 39-32)of next RX_REO_QUEUE descriptor in the 'receive timestamp' ordered list. From it the Position of this queue descriptor in the per AC aging waitlist can be derived. Value 0x0 indicates the 'NULL' pointer which implies that this is the last entry in the list. */ #define RX_REO_QUEUE_11_PTR_TO_NEXT_AGING_QUEUE_39_32_OFFSET 0x0000002c #define RX_REO_QUEUE_11_PTR_TO_NEXT_AGING_QUEUE_39_32_LSB 0 #define RX_REO_QUEUE_11_PTR_TO_NEXT_AGING_QUEUE_39_32_MASK 0x000000ff /* Description RX_REO_QUEUE_11_RESERVED_11A */ #define RX_REO_QUEUE_11_RESERVED_11A_OFFSET 0x0000002c #define RX_REO_QUEUE_11_RESERVED_11A_LSB 8 #define RX_REO_QUEUE_11_RESERVED_11A_MASK 0xffffff00 /* Description RX_REO_QUEUE_12_PTR_TO_PREVIOUS_AGING_QUEUE_31_0 Address (address bits 31-0)of next RX_REO_QUEUE descriptor in the 'receive timestamp' ordered list. From it the Position of this queue descriptor in the per AC aging waitlist can be derived. Value 0x0 indicates the 'NULL' pointer which implies that this is the first entry in the list. */ #define RX_REO_QUEUE_12_PTR_TO_PREVIOUS_AGING_QUEUE_31_0_OFFSET 0x00000030 #define RX_REO_QUEUE_12_PTR_TO_PREVIOUS_AGING_QUEUE_31_0_LSB 0 #define RX_REO_QUEUE_12_PTR_TO_PREVIOUS_AGING_QUEUE_31_0_MASK 0xffffffff /* Description RX_REO_QUEUE_13_PTR_TO_PREVIOUS_AGING_QUEUE_39_32 Address (address bits 39-32)of next RX_REO_QUEUE descriptor in the 'receive timestamp' ordered list. From it the Position of this queue descriptor in the per AC aging waitlist can be derived. Value 0x0 indicates the 'NULL' pointer which implies that this is the first entry in the list. */ #define RX_REO_QUEUE_13_PTR_TO_PREVIOUS_AGING_QUEUE_39_32_OFFSET 0x00000034 #define RX_REO_QUEUE_13_PTR_TO_PREVIOUS_AGING_QUEUE_39_32_LSB 0 #define RX_REO_QUEUE_13_PTR_TO_PREVIOUS_AGING_QUEUE_39_32_MASK 0x000000ff /* Description RX_REO_QUEUE_13_RESERVED_13A */ #define RX_REO_QUEUE_13_RESERVED_13A_OFFSET 0x00000034 #define RX_REO_QUEUE_13_RESERVED_13A_LSB 8 #define RX_REO_QUEUE_13_RESERVED_13A_MASK 0xffffff00 /* Description RX_REO_QUEUE_14_RX_BITMAP_31_0 When a bit is set, the corresponding frame is currently held in the re-order queue. The bitmap is Fully managed by HW. SW shall init this to 0, and then never ever change it */ #define RX_REO_QUEUE_14_RX_BITMAP_31_0_OFFSET 0x00000038 #define RX_REO_QUEUE_14_RX_BITMAP_31_0_LSB 0 #define RX_REO_QUEUE_14_RX_BITMAP_31_0_MASK 0xffffffff /* Description RX_REO_QUEUE_15_RX_BITMAP_63_32 See Rx_bitmap_31_0 description */ #define RX_REO_QUEUE_15_RX_BITMAP_63_32_OFFSET 0x0000003c #define RX_REO_QUEUE_15_RX_BITMAP_63_32_LSB 0 #define RX_REO_QUEUE_15_RX_BITMAP_63_32_MASK 0xffffffff /* Description RX_REO_QUEUE_16_RX_BITMAP_95_64 See Rx_bitmap_31_0 description */ #define RX_REO_QUEUE_16_RX_BITMAP_95_64_OFFSET 0x00000040 #define RX_REO_QUEUE_16_RX_BITMAP_95_64_LSB 0 #define RX_REO_QUEUE_16_RX_BITMAP_95_64_MASK 0xffffffff /* Description RX_REO_QUEUE_17_RX_BITMAP_127_96 See Rx_bitmap_31_0 description */ #define RX_REO_QUEUE_17_RX_BITMAP_127_96_OFFSET 0x00000044 #define RX_REO_QUEUE_17_RX_BITMAP_127_96_LSB 0 #define RX_REO_QUEUE_17_RX_BITMAP_127_96_MASK 0xffffffff /* Description RX_REO_QUEUE_18_RX_BITMAP_159_128 See Rx_bitmap_31_0 description */ #define RX_REO_QUEUE_18_RX_BITMAP_159_128_OFFSET 0x00000048 #define RX_REO_QUEUE_18_RX_BITMAP_159_128_LSB 0 #define RX_REO_QUEUE_18_RX_BITMAP_159_128_MASK 0xffffffff /* Description RX_REO_QUEUE_19_RX_BITMAP_191_160 See Rx_bitmap_31_0 description */ #define RX_REO_QUEUE_19_RX_BITMAP_191_160_OFFSET 0x0000004c #define RX_REO_QUEUE_19_RX_BITMAP_191_160_LSB 0 #define RX_REO_QUEUE_19_RX_BITMAP_191_160_MASK 0xffffffff /* Description RX_REO_QUEUE_20_RX_BITMAP_223_192 See Rx_bitmap_31_0 description */ #define RX_REO_QUEUE_20_RX_BITMAP_223_192_OFFSET 0x00000050 #define RX_REO_QUEUE_20_RX_BITMAP_223_192_LSB 0 #define RX_REO_QUEUE_20_RX_BITMAP_223_192_MASK 0xffffffff /* Description RX_REO_QUEUE_21_RX_BITMAP_255_224 See Rx_bitmap_31_0 description */ #define RX_REO_QUEUE_21_RX_BITMAP_255_224_OFFSET 0x00000054 #define RX_REO_QUEUE_21_RX_BITMAP_255_224_LSB 0 #define RX_REO_QUEUE_21_RX_BITMAP_255_224_MASK 0xffffffff /* Description RX_REO_QUEUE_22_CURRENT_MPDU_COUNT The number of MPDUs in the queue. */ #define RX_REO_QUEUE_22_CURRENT_MPDU_COUNT_OFFSET 0x00000058 #define RX_REO_QUEUE_22_CURRENT_MPDU_COUNT_LSB 0 #define RX_REO_QUEUE_22_CURRENT_MPDU_COUNT_MASK 0x0000007f /* Description RX_REO_QUEUE_22_CURRENT_MSDU_COUNT The number of MSDUs in the queue. */ #define RX_REO_QUEUE_22_CURRENT_MSDU_COUNT_OFFSET 0x00000058 #define RX_REO_QUEUE_22_CURRENT_MSDU_COUNT_LSB 7 #define RX_REO_QUEUE_22_CURRENT_MSDU_COUNT_MASK 0xffffff80 /* Description RX_REO_QUEUE_23_RESERVED_23 */ #define RX_REO_QUEUE_23_RESERVED_23_OFFSET 0x0000005c #define RX_REO_QUEUE_23_RESERVED_23_LSB 0 #define RX_REO_QUEUE_23_RESERVED_23_MASK 0x0000000f /* Description RX_REO_QUEUE_23_TIMEOUT_COUNT The number of times that REO started forwarding frames even though there is a hole in the bitmap. Forwarding reason is Timeout The counter saturates and freezes at 0x3F */ #define RX_REO_QUEUE_23_TIMEOUT_COUNT_OFFSET 0x0000005c #define RX_REO_QUEUE_23_TIMEOUT_COUNT_LSB 4 #define RX_REO_QUEUE_23_TIMEOUT_COUNT_MASK 0x000003f0 /* Description RX_REO_QUEUE_23_FORWARD_DUE_TO_BAR_COUNT The number of times that REO started forwarding frames even though there is a hole in the bitmap. Forwarding reason is reception of BAR frame. The counter saturates and freezes at 0x3F */ #define RX_REO_QUEUE_23_FORWARD_DUE_TO_BAR_COUNT_OFFSET 0x0000005c #define RX_REO_QUEUE_23_FORWARD_DUE_TO_BAR_COUNT_LSB 10 #define RX_REO_QUEUE_23_FORWARD_DUE_TO_BAR_COUNT_MASK 0x0000fc00 /* Description RX_REO_QUEUE_23_DUPLICATE_COUNT The number of duplicate frames that have been detected */ #define RX_REO_QUEUE_23_DUPLICATE_COUNT_OFFSET 0x0000005c #define RX_REO_QUEUE_23_DUPLICATE_COUNT_LSB 16 #define RX_REO_QUEUE_23_DUPLICATE_COUNT_MASK 0xffff0000 /* Description RX_REO_QUEUE_24_FRAMES_IN_ORDER_COUNT The number of frames that have been received in order (without a hole that prevented them from being forwarded immediately) This corresponds to the Reorder opcodes: 'FWDCUR' and 'FWD BUF' */ #define RX_REO_QUEUE_24_FRAMES_IN_ORDER_COUNT_OFFSET 0x00000060 #define RX_REO_QUEUE_24_FRAMES_IN_ORDER_COUNT_LSB 0 #define RX_REO_QUEUE_24_FRAMES_IN_ORDER_COUNT_MASK 0x00ffffff /* Description RX_REO_QUEUE_24_BAR_RECEIVED_COUNT The number of times a BAR frame is received. This corresponds to the Reorder opcodes with 'DROP' The counter saturates and freezes at 0xFF */ #define RX_REO_QUEUE_24_BAR_RECEIVED_COUNT_OFFSET 0x00000060 #define RX_REO_QUEUE_24_BAR_RECEIVED_COUNT_LSB 24 #define RX_REO_QUEUE_24_BAR_RECEIVED_COUNT_MASK 0xff000000 /* Description RX_REO_QUEUE_25_MPDU_FRAMES_PROCESSED_COUNT The total number of MPDU frames that have been processed by REO. 'Processing' here means that REO has received them out of the entrance ring, and retrieved the corresponding RX_REO_QUEUE Descriptor. Note that this count includes duplicates, frames that later had errors, etc. Note that field 'Duplicate_count' indicates how many of these MPDUs were duplicates. */ #define RX_REO_QUEUE_25_MPDU_FRAMES_PROCESSED_COUNT_OFFSET 0x00000064 #define RX_REO_QUEUE_25_MPDU_FRAMES_PROCESSED_COUNT_LSB 0 #define RX_REO_QUEUE_25_MPDU_FRAMES_PROCESSED_COUNT_MASK 0xffffffff /* Description RX_REO_QUEUE_26_MSDU_FRAMES_PROCESSED_COUNT The total number of MSDU frames that have been processed by REO. 'Processing' here means that REO has received them out of the entrance ring, and retrieved the corresponding RX_REO_QUEUE Descriptor. Note that this count includes duplicates, frames that later had errors, etc. */ #define RX_REO_QUEUE_26_MSDU_FRAMES_PROCESSED_COUNT_OFFSET 0x00000068 #define RX_REO_QUEUE_26_MSDU_FRAMES_PROCESSED_COUNT_LSB 0 #define RX_REO_QUEUE_26_MSDU_FRAMES_PROCESSED_COUNT_MASK 0xffffffff /* Description RX_REO_QUEUE_27_TOTAL_PROCESSED_BYTE_COUNT An approximation of the number of bytes processed for this queue. 'Processing' here means that REO has received them out of the entrance ring, and retrieved the corresponding RX_REO_QUEUE Descriptor. Note that this count includes duplicates, frames that later had errors, etc. In 64 byte units */ #define RX_REO_QUEUE_27_TOTAL_PROCESSED_BYTE_COUNT_OFFSET 0x0000006c #define RX_REO_QUEUE_27_TOTAL_PROCESSED_BYTE_COUNT_LSB 0 #define RX_REO_QUEUE_27_TOTAL_PROCESSED_BYTE_COUNT_MASK 0xffffffff /* Description RX_REO_QUEUE_28_LATE_RECEIVE_MPDU_COUNT The number of MPDUs received after the window had already moved on. The 'late' sequence window is defined as (Window SSN - 256) - (Window SSN - 1) This corresponds with Out of order detection in duplicate detect FSM The counter saturates and freezes at 0xFFF */ #define RX_REO_QUEUE_28_LATE_RECEIVE_MPDU_COUNT_OFFSET 0x00000070 #define RX_REO_QUEUE_28_LATE_RECEIVE_MPDU_COUNT_LSB 0 #define RX_REO_QUEUE_28_LATE_RECEIVE_MPDU_COUNT_MASK 0x00000fff /* Description RX_REO_QUEUE_28_WINDOW_JUMP_2K The number of times the window moved more then 2K The counter saturates and freezes at 0xF (Note: field name can not start with number: previous 2k_window_jump) */ #define RX_REO_QUEUE_28_WINDOW_JUMP_2K_OFFSET 0x00000070 #define RX_REO_QUEUE_28_WINDOW_JUMP_2K_LSB 12 #define RX_REO_QUEUE_28_WINDOW_JUMP_2K_MASK 0x0000f000 /* Description RX_REO_QUEUE_28_HOLE_COUNT The number of times a hole was created in the receive bitmap. This corresponds to the Reorder opcodes with 'QCUR' */ #define RX_REO_QUEUE_28_HOLE_COUNT_OFFSET 0x00000070 #define RX_REO_QUEUE_28_HOLE_COUNT_LSB 16 #define RX_REO_QUEUE_28_HOLE_COUNT_MASK 0xffff0000 /* Description RX_REO_QUEUE_29_RESERVED_29 */ #define RX_REO_QUEUE_29_RESERVED_29_OFFSET 0x00000074 #define RX_REO_QUEUE_29_RESERVED_29_LSB 0 #define RX_REO_QUEUE_29_RESERVED_29_MASK 0xffffffff /* Description RX_REO_QUEUE_30_RESERVED_30 */ #define RX_REO_QUEUE_30_RESERVED_30_OFFSET 0x00000078 #define RX_REO_QUEUE_30_RESERVED_30_LSB 0 #define RX_REO_QUEUE_30_RESERVED_30_MASK 0xffffffff /* Description RX_REO_QUEUE_31_RESERVED_31 */ #define RX_REO_QUEUE_31_RESERVED_31_OFFSET 0x0000007c #define RX_REO_QUEUE_31_RESERVED_31_LSB 0 #define RX_REO_QUEUE_31_RESERVED_31_MASK 0xffffffff #endif // _RX_REO_QUEUE_H_