/* * Copyright (c) 2020, The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef _PHYRX_RSSI_LEGACY_H_ #define _PHYRX_RSSI_LEGACY_H_ #if !defined(__ASSEMBLER__) #endif #include "receive_rssi_info.h" // ################ START SUMMARY ################# // // Dword Fields // 0 reception_type[3:0], rx_chain_mask_type[4], reserved_0[5], receive_bandwidth[7:6], rx_chain_mask[15:8], phy_ppdu_id[31:16] // 1 sw_phy_meta_data[31:0] // 2 ppdu_start_timestamp[31:0] // 3-18 struct receive_rssi_info pre_rssi_info_details; // 19-34 struct receive_rssi_info preamble_rssi_info_details; // 35 pre_rssi_comb[7:0], rssi_comb[15:8], normalized_pre_rssi_comb[23:16], normalized_rssi_comb[31:24] // 36 rssi_comb_ppdu[7:0], rssi_db_to_dbm_offset[15:8], rssi_for_spatial_reuse[23:16], rssi_for_trigger_resp[31:24] // // ################ END SUMMARY ################# #define NUM_OF_DWORDS_PHYRX_RSSI_LEGACY 37 struct phyrx_rssi_legacy { uint32_t reception_type : 4, //[3:0] rx_chain_mask_type : 1, //[4] reserved_0 : 1, //[5] receive_bandwidth : 2, //[7:6] rx_chain_mask : 8, //[15:8] phy_ppdu_id : 16; //[31:16] uint32_t sw_phy_meta_data : 32; //[31:0] uint32_t ppdu_start_timestamp : 32; //[31:0] struct receive_rssi_info pre_rssi_info_details; struct receive_rssi_info preamble_rssi_info_details; uint32_t pre_rssi_comb : 8, //[7:0] rssi_comb : 8, //[15:8] normalized_pre_rssi_comb : 8, //[23:16] normalized_rssi_comb : 8; //[31:24] uint32_t rssi_comb_ppdu : 8, //[7:0] rssi_db_to_dbm_offset : 8, //[15:8] rssi_for_spatial_reuse : 8, //[23:16] rssi_for_trigger_resp : 8; //[31:24] }; /* reception_type This field helps MAC SW determine which field in this (and following TLVs) will contain valid information. For example some RSSI info not valid in case of uplink_ofdma.. In case of UL MU OFDMA or UL MU-MIMO reception pre-announced by MAC during trigger Tx, e-nums 0 or 1 should be used. In case of UL MU OFDMA+MIMO reception, or in case of UL MU reception when PHY has not been pre-informed, e-num 2 should be used. If this happens, the UL MU frame in the medium is by definition not for this device. As reference, see doc: Lithium_mac_phy_interface_hld.docx Chapter: 7.15.1: 11ax UL MU Reception TLV sequences when this device is not targeted. PHY RX has been instructed in advance that the upcoming reception is frameless. This implieas that in advance it is known that all frames will collide in the medium, and nothing can be properly decoded... This can happen during the CTS reception in response to the triggered MU-RTS transmission. MAC takes no action when seeing this e_num. For the frameless reception the indication in pkt_end is the final one evaluated by the MAC For the relationship between pkt_type and this field, see the table at the end of this TLV description. rx_chain_mask_type Indicates if the field rx_chain_mask represents the mask at start of reception (on which the Rssi_comb value is based), or the setting used during the remainder of the reception 1'b0: rxtd.listen_pri80_mask 1'b1: Final receive mask reserved_0 receive_bandwidth Full receive Bandwidth rx_chain_mask The chain mask at the start of the reception of this frame. each bit is one antenna 0: the chain is NOT used 1: the chain is used Supports up to 8 chains Used in 11ax TPC calculations for UL OFDMA/MIMO and has to be in sync with the rssi_comb value as this is also used by the MAC for the TPC calculations. phy_ppdu_id A ppdu counter value that PHY increments for every PPDU received. The counter value wraps around sw_phy_meta_data 32 bit Meta data that SW can program in a 32 bit PHY register and PHY will insert the value in every RX_RSSI_LEGACY TLV that it generates. SW uses this field to embed among other things some SW channel info. ppdu_start_timestamp Timestamp that indicates when the PPDU that contained this MPDU started on the medium. Note that PHY will detect the start later, and will have to derive out of the preamble info when the frame actually appeared on the medium struct receive_rssi_info pre_rssi_info_details This field is not valid when reception_is_uplink_ofdma Overview of the pre-RSSI values. That is RSSI values measured on the medium before this reception started. struct receive_rssi_info preamble_rssi_info_details This field is not valid when reception_is_uplink_ofdma Overview of the RSSI values measured during the pre-amble phase of this reception pre_rssi_comb Combined pre_rssi of all chains. Based on primary channel RSSI. RSSI is reported as 8b signed values. Nominally value is in dB units above or below the noisefloor(minCCApwr). The resolution can be: 1dB or 0.5dB. This is statically configured within the PHY and MAC In case of 1dB, the Range is: -128dB to 127dB In case of 0.5dB, the Range is: -64dB to 63.5dB rssi_comb Combined rssi of all chains. Based on primary channel RSSI. RSSI is reported as 8b signed values. Nominally value is in dB units above or below the noisefloor(minCCApwr). The resolution can be: 1dB or 0.5dB. This is statically configured within the PHY and MAC In case of 1dB, the Range is: -128dB to 127dB In case of 0.5dB, the Range is: -64dB to 63.5dB normalized_pre_rssi_comb Combined pre_rssi of all chains, but normalized back to a single chain. This avoids PDG from having to evaluate this in combination with receive chain mask and perform all kinds of pre-processing algorithms. Based on primary channel RSSI. RSSI is reported as 8b signed values. Nominally value is in dB units above or below the noisefloor(minCCApwr). The resolution can be: 1dB or 0.5dB. This is statically configured within the PHY and MAC In case of 1dB, the Range is: -128dB to 127dB In case of 0.5dB, the Range is: -64dB to 63.5dB normalized_rssi_comb Combined rssi of all chains, but normalized back to a single chain. This avoids PDG from having to evaluate this in combination with receive chain mask and perform all kinds of pre-processing algorithms. Based on primary channel RSSI. RSSI is reported as 8b signed values. Nominally value is in dB units above or below the noisefloor(minCCApwr). The resolution can be: 1dB or 0.5dB. This is statically configured within the PHY and MAC In case of 1dB, the Range is: -128dB to 127dB In case of 0.5dB, the Range is: -64dB to 63.5dB rssi_comb_ppdu Combined rssi of all chains, based on active RUs/subchannels, a.k.a. rssi_pkt_bw_mac RSSI is reported as 8b signed values. Nominally value is in dB units above or below the noisefloor(minCCApwr). The resolution can be: 1dB or 0.5dB. This is statically configured within the PHY and MAC In case of 1dB, the Range is: -128dB to 127dB In case of 0.5dB, the Range is: -64dB to 63.5dB When packet BW is 20 MHz, rssi_comb_ppdu = rssi_comb. When packet BW > 20 MHz, rssi_comb < rssi_comb_ppdu because rssi_comb only includes power of primary 20 MHz while rssi_comb_ppdu includes power of active RUs/subchannels. rssi_db_to_dbm_offset Offset between 'dB' and 'dBm' values. SW can use this value to convert RSSI 'dBm' values back to 'dB,' and report both the values. When rssi_db_to_dbm_offset = 0, all rssi_xxx fields are defined in dB. When rssi_db_to_dbm_offset is a large negative value, all rssi_xxx fields are defined in dBm. rssi_for_spatial_reuse RSSI to be used by HWSCH for transmit (power) selection during an SR opportunity, reported as an 8-bit signed value The resolution can be: 1dB or 0.5dB. This is statically configured within the PHY and MAC In case of 1dB, the Range is: -128dB to 127dB In case of 0.5dB, the Range is: -64dB to 63.5dB As per 802.11ax draft 3.3 subsubclauses 27.10.2.2/3, for OBSS PD spatial reuse, the received signal strength level should be measured from the L-STF or L-LTF (but not L-SIG), just as measured to indicate CCA. Also, as per 802.11ax draft 3.3, for OBSS PD spatial reuse, MAC should compare this value with its programmed OBSS_PDlevel scaled from 20 MHz to the Rx PPDU bandwidth. Since MAC does not do this scaling, PHY is instead expected to normalize the reported RSSI to 20 MHz. Also as per 802.11ax draft 3.3 subsubclause 27.10.3.2, for SRP spatial reuse, the received power level should be measured from the L-STF or L-LTF (but not L-SIG) and normalized to 20 MHz. rssi_for_trigger_resp RSSI to be used by PDG for transmit (power) selection during trigger response, reported as an 8-bit signed value The resolution can be: 1dB or 0.5dB. This is statically configured within the PHY and MAC In case of 1dB, the Range is: -128dB to 127dB In case of 0.5dB, the Range is: -64dB to 63.5dB As per 802.11ax draft 3.3 subsubclauses 28.3.14.2, for trigger response, the received power should be measured from the non-HE portion of the preamble of the PPDU containing the trigger, normalized to 20 MHz, averaged over the antennas over which the average pathloss is being computed. */ /* Description PHYRX_RSSI_LEGACY_0_RECEPTION_TYPE This field helps MAC SW determine which field in this (and following TLVs) will contain valid information. For example some RSSI info not valid in case of uplink_ofdma.. In case of UL MU OFDMA or UL MU-MIMO reception pre-announced by MAC during trigger Tx, e-nums 0 or 1 should be used. In case of UL MU OFDMA+MIMO reception, or in case of UL MU reception when PHY has not been pre-informed, e-num 2 should be used. If this happens, the UL MU frame in the medium is by definition not for this device. As reference, see doc: Lithium_mac_phy_interface_hld.docx Chapter: 7.15.1: 11ax UL MU Reception TLV sequences when this device is not targeted. PHY RX has been instructed in advance that the upcoming reception is frameless. This implieas that in advance it is known that all frames will collide in the medium, and nothing can be properly decoded... This can happen during the CTS reception in response to the triggered MU-RTS transmission. MAC takes no action when seeing this e_num. For the frameless reception the indication in pkt_end is the final one evaluated by the MAC For the relationship between pkt_type and this field, see the table at the end of this TLV description. */ #define PHYRX_RSSI_LEGACY_0_RECEPTION_TYPE_OFFSET 0x00000000 #define PHYRX_RSSI_LEGACY_0_RECEPTION_TYPE_LSB 0 #define PHYRX_RSSI_LEGACY_0_RECEPTION_TYPE_MASK 0x0000000f /* Description PHYRX_RSSI_LEGACY_0_RX_CHAIN_MASK_TYPE Indicates if the field rx_chain_mask represents the mask at start of reception (on which the Rssi_comb value is based), or the setting used during the remainder of the reception 1'b0: rxtd.listen_pri80_mask 1'b1: Final receive mask */ #define PHYRX_RSSI_LEGACY_0_RX_CHAIN_MASK_TYPE_OFFSET 0x00000000 #define PHYRX_RSSI_LEGACY_0_RX_CHAIN_MASK_TYPE_LSB 4 #define PHYRX_RSSI_LEGACY_0_RX_CHAIN_MASK_TYPE_MASK 0x00000010 /* Description PHYRX_RSSI_LEGACY_0_RESERVED_0 */ #define PHYRX_RSSI_LEGACY_0_RESERVED_0_OFFSET 0x00000000 #define PHYRX_RSSI_LEGACY_0_RESERVED_0_LSB 5 #define PHYRX_RSSI_LEGACY_0_RESERVED_0_MASK 0x00000020 /* Description PHYRX_RSSI_LEGACY_0_RECEIVE_BANDWIDTH Full receive Bandwidth */ #define PHYRX_RSSI_LEGACY_0_RECEIVE_BANDWIDTH_OFFSET 0x00000000 #define PHYRX_RSSI_LEGACY_0_RECEIVE_BANDWIDTH_LSB 6 #define PHYRX_RSSI_LEGACY_0_RECEIVE_BANDWIDTH_MASK 0x000000c0 /* Description PHYRX_RSSI_LEGACY_0_RX_CHAIN_MASK The chain mask at the start of the reception of this frame. each bit is one antenna 0: the chain is NOT used 1: the chain is used Supports up to 8 chains Used in 11ax TPC calculations for UL OFDMA/MIMO and has to be in sync with the rssi_comb value as this is also used by the MAC for the TPC calculations. */ #define PHYRX_RSSI_LEGACY_0_RX_CHAIN_MASK_OFFSET 0x00000000 #define PHYRX_RSSI_LEGACY_0_RX_CHAIN_MASK_LSB 8 #define PHYRX_RSSI_LEGACY_0_RX_CHAIN_MASK_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_0_PHY_PPDU_ID A ppdu counter value that PHY increments for every PPDU received. The counter value wraps around */ #define PHYRX_RSSI_LEGACY_0_PHY_PPDU_ID_OFFSET 0x00000000 #define PHYRX_RSSI_LEGACY_0_PHY_PPDU_ID_LSB 16 #define PHYRX_RSSI_LEGACY_0_PHY_PPDU_ID_MASK 0xffff0000 /* Description PHYRX_RSSI_LEGACY_1_SW_PHY_META_DATA 32 bit Meta data that SW can program in a 32 bit PHY register and PHY will insert the value in every RX_RSSI_LEGACY TLV that it generates. SW uses this field to embed among other things some SW channel info. */ #define PHYRX_RSSI_LEGACY_1_SW_PHY_META_DATA_OFFSET 0x00000004 #define PHYRX_RSSI_LEGACY_1_SW_PHY_META_DATA_LSB 0 #define PHYRX_RSSI_LEGACY_1_SW_PHY_META_DATA_MASK 0xffffffff /* Description PHYRX_RSSI_LEGACY_2_PPDU_START_TIMESTAMP Timestamp that indicates when the PPDU that contained this MPDU started on the medium. Note that PHY will detect the start later, and will have to derive out of the preamble info when the frame actually appeared on the medium */ #define PHYRX_RSSI_LEGACY_2_PPDU_START_TIMESTAMP_OFFSET 0x00000008 #define PHYRX_RSSI_LEGACY_2_PPDU_START_TIMESTAMP_LSB 0 #define PHYRX_RSSI_LEGACY_2_PPDU_START_TIMESTAMP_MASK 0xffffffff /* EXTERNAL REFERENCE : struct receive_rssi_info pre_rssi_info_details */ /* Description PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN0 RSSI of RX PPDU on chain 0 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN0_OFFSET 0x0000000c #define PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN0_LSB 0 #define PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN0_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN0 RSSI of RX PPDU on chain 0 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN0_OFFSET 0x0000000c #define PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN0_LSB 8 #define PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN0_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN0 RSSI of RX PPDU on chain 0 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN0_OFFSET 0x0000000c #define PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN0_LSB 16 #define PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN0_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN0 RSSI of RX PPDU on chain 0 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN0_OFFSET 0x0000000c #define PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN0_LSB 24 #define PHYRX_RSSI_LEGACY_3_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN0_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN0 RSSI of RX PPDU on chain 0 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN0_OFFSET 0x00000010 #define PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN0_LSB 0 #define PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN0_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN0 RSSI of RX PPDU on chain 0 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN0_OFFSET 0x00000010 #define PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN0_LSB 8 #define PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN0_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN0 RSSI of RX PPDU on chain 0 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN0_OFFSET 0x00000010 #define PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN0_LSB 16 #define PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN0_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN0 RSSI of RX PPDU on chain 0 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN0_OFFSET 0x00000010 #define PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN0_LSB 24 #define PHYRX_RSSI_LEGACY_4_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN0_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN1 RSSI of RX PPDU on chain 1 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN1_OFFSET 0x00000014 #define PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN1_LSB 0 #define PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN1_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN1 RSSI of RX PPDU on chain 1 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN1_OFFSET 0x00000014 #define PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN1_LSB 8 #define PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN1_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN1 RSSI of RX PPDU on chain 1 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN1_OFFSET 0x00000014 #define PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN1_LSB 16 #define PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN1_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN1 RSSI of RX PPDU on chain 1 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN1_OFFSET 0x00000014 #define PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN1_LSB 24 #define PHYRX_RSSI_LEGACY_5_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN1_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN1 RSSI of RX PPDU on chain 1 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN1_OFFSET 0x00000018 #define PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN1_LSB 0 #define PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN1_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN1 RSSI of RX PPDU on chain 1 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN1_OFFSET 0x00000018 #define PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN1_LSB 8 #define PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN1_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN1 RSSI of RX PPDU on chain 1 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN1_OFFSET 0x00000018 #define PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN1_LSB 16 #define PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN1_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN1 RSSI of RX PPDU on chain 1 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN1_OFFSET 0x00000018 #define PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN1_LSB 24 #define PHYRX_RSSI_LEGACY_6_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN1_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN2 RSSI of RX PPDU on chain 2 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN2_OFFSET 0x0000001c #define PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN2_LSB 0 #define PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN2_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN2 RSSI of RX PPDU on chain 2 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN2_OFFSET 0x0000001c #define PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN2_LSB 8 #define PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN2_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN2 RSSI of RX PPDU on chain 2 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN2_OFFSET 0x0000001c #define PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN2_LSB 16 #define PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN2_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN2 RSSI of RX PPDU on chain 2 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN2_OFFSET 0x0000001c #define PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN2_LSB 24 #define PHYRX_RSSI_LEGACY_7_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN2_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN2 RSSI of RX PPDU on chain 2 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN2_OFFSET 0x00000020 #define PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN2_LSB 0 #define PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN2_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN2 RSSI of RX PPDU on chain 2 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN2_OFFSET 0x00000020 #define PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN2_LSB 8 #define PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN2_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN2 RSSI of RX PPDU on chain 2 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN2_OFFSET 0x00000020 #define PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN2_LSB 16 #define PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN2_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN2 RSSI of RX PPDU on chain 2 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN2_OFFSET 0x00000020 #define PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN2_LSB 24 #define PHYRX_RSSI_LEGACY_8_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN2_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN3 RSSI of RX PPDU on chain 3 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN3_OFFSET 0x00000024 #define PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN3_LSB 0 #define PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN3_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN3 RSSI of RX PPDU on chain 3 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN3_OFFSET 0x00000024 #define PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN3_LSB 8 #define PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN3_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN3 RSSI of RX PPDU on chain 3 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN3_OFFSET 0x00000024 #define PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN3_LSB 16 #define PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN3_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN3 RSSI of RX PPDU on chain 3 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN3_OFFSET 0x00000024 #define PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN3_LSB 24 #define PHYRX_RSSI_LEGACY_9_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN3_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN3 RSSI of RX PPDU on chain 3 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN3_OFFSET 0x00000028 #define PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN3_LSB 0 #define PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN3_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN3 RSSI of RX PPDU on chain 3 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN3_OFFSET 0x00000028 #define PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN3_LSB 8 #define PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN3_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN3 RSSI of RX PPDU on chain 3 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN3_OFFSET 0x00000028 #define PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN3_LSB 16 #define PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN3_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN3 RSSI of RX PPDU on chain 3 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN3_OFFSET 0x00000028 #define PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN3_LSB 24 #define PHYRX_RSSI_LEGACY_10_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN3_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN4 RSSI of RX PPDU on chain 4 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN4_OFFSET 0x0000002c #define PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN4_LSB 0 #define PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN4_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN4 RSSI of RX PPDU on chain 4 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN4_OFFSET 0x0000002c #define PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN4_LSB 8 #define PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN4_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN4 RSSI of RX PPDU on chain 4 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN4_OFFSET 0x0000002c #define PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN4_LSB 16 #define PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN4_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN4 RSSI of RX PPDU on chain 4 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN4_OFFSET 0x0000002c #define PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN4_LSB 24 #define PHYRX_RSSI_LEGACY_11_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN4_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN4 RSSI of RX PPDU on chain 4 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN4_OFFSET 0x00000030 #define PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN4_LSB 0 #define PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN4_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN4 RSSI of RX PPDU on chain 4 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN4_OFFSET 0x00000030 #define PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN4_LSB 8 #define PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN4_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN4 RSSI of RX PPDU on chain 4 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN4_OFFSET 0x00000030 #define PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN4_LSB 16 #define PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN4_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN4 RSSI of RX PPDU on chain 4 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN4_OFFSET 0x00000030 #define PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN4_LSB 24 #define PHYRX_RSSI_LEGACY_12_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN4_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN5 RSSI of RX PPDU on chain 0 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN5_OFFSET 0x00000034 #define PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN5_LSB 0 #define PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN5_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN5 RSSI of RX PPDU on chain 5 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN5_OFFSET 0x00000034 #define PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN5_LSB 8 #define PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN5_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN5 RSSI of RX PPDU on chain 5 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN5_OFFSET 0x00000034 #define PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN5_LSB 16 #define PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN5_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN5 RSSI of RX PPDU on chain 5 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN5_OFFSET 0x00000034 #define PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN5_LSB 24 #define PHYRX_RSSI_LEGACY_13_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN5_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN5 RSSI of RX PPDU on chain 5 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN5_OFFSET 0x00000038 #define PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN5_LSB 0 #define PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN5_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN5 RSSI of RX PPDU on chain 5 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN5_OFFSET 0x00000038 #define PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN5_LSB 8 #define PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN5_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN5 RSSI of RX PPDU on chain 5 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN5_OFFSET 0x00000038 #define PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN5_LSB 16 #define PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN5_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN5 RSSI of RX PPDU on chain 5 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN5_OFFSET 0x00000038 #define PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN5_LSB 24 #define PHYRX_RSSI_LEGACY_14_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN5_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN6 RSSI of RX PPDU on chain 6 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN6_OFFSET 0x0000003c #define PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN6_LSB 0 #define PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN6_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN6 RSSI of RX PPDU on chain 6 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN6_OFFSET 0x0000003c #define PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN6_LSB 8 #define PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN6_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN6 RSSI of RX PPDU on chain 6 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN6_OFFSET 0x0000003c #define PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN6_LSB 16 #define PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN6_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN6 RSSI of RX PPDU on chain 6 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN6_OFFSET 0x0000003c #define PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN6_LSB 24 #define PHYRX_RSSI_LEGACY_15_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN6_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN6 RSSI of RX PPDU on chain 6 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN6_OFFSET 0x00000040 #define PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN6_LSB 0 #define PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN6_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN6 RSSI of RX PPDU on chain 6 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN6_OFFSET 0x00000040 #define PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN6_LSB 8 #define PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN6_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN6 RSSI of RX PPDU on chain 6 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN6_OFFSET 0x00000040 #define PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN6_LSB 16 #define PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN6_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN6 RSSI of RX PPDU on chain 6 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN6_OFFSET 0x00000040 #define PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN6_LSB 24 #define PHYRX_RSSI_LEGACY_16_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN6_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN7 RSSI of RX PPDU on chain 7 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN7_OFFSET 0x00000044 #define PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN7_LSB 0 #define PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN7_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN7 RSSI of RX PPDU on chain 7 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN7_OFFSET 0x00000044 #define PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN7_LSB 8 #define PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN7_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN7 RSSI of RX PPDU on chain 7 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN7_OFFSET 0x00000044 #define PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN7_LSB 16 #define PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN7_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN7 RSSI of RX PPDU on chain 7 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN7_OFFSET 0x00000044 #define PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN7_LSB 24 #define PHYRX_RSSI_LEGACY_17_PRE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN7_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN7 RSSI of RX PPDU on chain 7 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN7_OFFSET 0x00000048 #define PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN7_LSB 0 #define PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN7_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN7 RSSI of RX PPDU on chain 7 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN7_OFFSET 0x00000048 #define PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN7_LSB 8 #define PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN7_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN7 RSSI of RX PPDU on chain 7 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN7_OFFSET 0x00000048 #define PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN7_LSB 16 #define PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN7_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN7 RSSI of RX PPDU on chain 7 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN7_OFFSET 0x00000048 #define PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN7_LSB 24 #define PHYRX_RSSI_LEGACY_18_PRE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN7_MASK 0xff000000 /* EXTERNAL REFERENCE : struct receive_rssi_info preamble_rssi_info_details */ /* Description PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN0 RSSI of RX PPDU on chain 0 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN0_OFFSET 0x0000004c #define PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN0_LSB 0 #define PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN0_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN0 RSSI of RX PPDU on chain 0 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN0_OFFSET 0x0000004c #define PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN0_LSB 8 #define PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN0_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN0 RSSI of RX PPDU on chain 0 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN0_OFFSET 0x0000004c #define PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN0_LSB 16 #define PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN0_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN0 RSSI of RX PPDU on chain 0 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN0_OFFSET 0x0000004c #define PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN0_LSB 24 #define PHYRX_RSSI_LEGACY_19_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN0_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN0 RSSI of RX PPDU on chain 0 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN0_OFFSET 0x00000050 #define PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN0_LSB 0 #define PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN0_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN0 RSSI of RX PPDU on chain 0 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN0_OFFSET 0x00000050 #define PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN0_LSB 8 #define PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN0_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN0 RSSI of RX PPDU on chain 0 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN0_OFFSET 0x00000050 #define PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN0_LSB 16 #define PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN0_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN0 RSSI of RX PPDU on chain 0 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN0_OFFSET 0x00000050 #define PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN0_LSB 24 #define PHYRX_RSSI_LEGACY_20_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN0_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN1 RSSI of RX PPDU on chain 1 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN1_OFFSET 0x00000054 #define PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN1_LSB 0 #define PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN1_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN1 RSSI of RX PPDU on chain 1 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN1_OFFSET 0x00000054 #define PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN1_LSB 8 #define PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN1_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN1 RSSI of RX PPDU on chain 1 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN1_OFFSET 0x00000054 #define PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN1_LSB 16 #define PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN1_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN1 RSSI of RX PPDU on chain 1 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN1_OFFSET 0x00000054 #define PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN1_LSB 24 #define PHYRX_RSSI_LEGACY_21_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN1_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN1 RSSI of RX PPDU on chain 1 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN1_OFFSET 0x00000058 #define PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN1_LSB 0 #define PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN1_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN1 RSSI of RX PPDU on chain 1 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN1_OFFSET 0x00000058 #define PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN1_LSB 8 #define PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN1_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN1 RSSI of RX PPDU on chain 1 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN1_OFFSET 0x00000058 #define PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN1_LSB 16 #define PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN1_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN1 RSSI of RX PPDU on chain 1 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN1_OFFSET 0x00000058 #define PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN1_LSB 24 #define PHYRX_RSSI_LEGACY_22_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN1_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN2 RSSI of RX PPDU on chain 2 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN2_OFFSET 0x0000005c #define PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN2_LSB 0 #define PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN2_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN2 RSSI of RX PPDU on chain 2 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN2_OFFSET 0x0000005c #define PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN2_LSB 8 #define PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN2_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN2 RSSI of RX PPDU on chain 2 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN2_OFFSET 0x0000005c #define PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN2_LSB 16 #define PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN2_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN2 RSSI of RX PPDU on chain 2 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN2_OFFSET 0x0000005c #define PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN2_LSB 24 #define PHYRX_RSSI_LEGACY_23_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN2_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN2 RSSI of RX PPDU on chain 2 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN2_OFFSET 0x00000060 #define PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN2_LSB 0 #define PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN2_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN2 RSSI of RX PPDU on chain 2 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN2_OFFSET 0x00000060 #define PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN2_LSB 8 #define PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN2_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN2 RSSI of RX PPDU on chain 2 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN2_OFFSET 0x00000060 #define PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN2_LSB 16 #define PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN2_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN2 RSSI of RX PPDU on chain 2 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN2_OFFSET 0x00000060 #define PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN2_LSB 24 #define PHYRX_RSSI_LEGACY_24_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN2_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN3 RSSI of RX PPDU on chain 3 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN3_OFFSET 0x00000064 #define PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN3_LSB 0 #define PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN3_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN3 RSSI of RX PPDU on chain 3 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN3_OFFSET 0x00000064 #define PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN3_LSB 8 #define PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN3_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN3 RSSI of RX PPDU on chain 3 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN3_OFFSET 0x00000064 #define PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN3_LSB 16 #define PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN3_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN3 RSSI of RX PPDU on chain 3 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN3_OFFSET 0x00000064 #define PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN3_LSB 24 #define PHYRX_RSSI_LEGACY_25_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN3_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN3 RSSI of RX PPDU on chain 3 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN3_OFFSET 0x00000068 #define PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN3_LSB 0 #define PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN3_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN3 RSSI of RX PPDU on chain 3 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN3_OFFSET 0x00000068 #define PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN3_LSB 8 #define PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN3_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN3 RSSI of RX PPDU on chain 3 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN3_OFFSET 0x00000068 #define PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN3_LSB 16 #define PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN3_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN3 RSSI of RX PPDU on chain 3 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN3_OFFSET 0x00000068 #define PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN3_LSB 24 #define PHYRX_RSSI_LEGACY_26_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN3_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN4 RSSI of RX PPDU on chain 4 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN4_OFFSET 0x0000006c #define PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN4_LSB 0 #define PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN4_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN4 RSSI of RX PPDU on chain 4 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN4_OFFSET 0x0000006c #define PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN4_LSB 8 #define PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN4_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN4 RSSI of RX PPDU on chain 4 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN4_OFFSET 0x0000006c #define PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN4_LSB 16 #define PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN4_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN4 RSSI of RX PPDU on chain 4 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN4_OFFSET 0x0000006c #define PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN4_LSB 24 #define PHYRX_RSSI_LEGACY_27_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN4_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN4 RSSI of RX PPDU on chain 4 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN4_OFFSET 0x00000070 #define PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN4_LSB 0 #define PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN4_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN4 RSSI of RX PPDU on chain 4 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN4_OFFSET 0x00000070 #define PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN4_LSB 8 #define PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN4_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN4 RSSI of RX PPDU on chain 4 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN4_OFFSET 0x00000070 #define PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN4_LSB 16 #define PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN4_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN4 RSSI of RX PPDU on chain 4 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN4_OFFSET 0x00000070 #define PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN4_LSB 24 #define PHYRX_RSSI_LEGACY_28_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN4_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN5 RSSI of RX PPDU on chain 0 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN5_OFFSET 0x00000074 #define PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN5_LSB 0 #define PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN5_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN5 RSSI of RX PPDU on chain 5 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN5_OFFSET 0x00000074 #define PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN5_LSB 8 #define PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN5_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN5 RSSI of RX PPDU on chain 5 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN5_OFFSET 0x00000074 #define PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN5_LSB 16 #define PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN5_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN5 RSSI of RX PPDU on chain 5 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN5_OFFSET 0x00000074 #define PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN5_LSB 24 #define PHYRX_RSSI_LEGACY_29_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN5_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN5 RSSI of RX PPDU on chain 5 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN5_OFFSET 0x00000078 #define PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN5_LSB 0 #define PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN5_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN5 RSSI of RX PPDU on chain 5 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN5_OFFSET 0x00000078 #define PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN5_LSB 8 #define PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN5_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN5 RSSI of RX PPDU on chain 5 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN5_OFFSET 0x00000078 #define PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN5_LSB 16 #define PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN5_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN5 RSSI of RX PPDU on chain 5 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN5_OFFSET 0x00000078 #define PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN5_LSB 24 #define PHYRX_RSSI_LEGACY_30_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN5_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN6 RSSI of RX PPDU on chain 6 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN6_OFFSET 0x0000007c #define PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN6_LSB 0 #define PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN6_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN6 RSSI of RX PPDU on chain 6 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN6_OFFSET 0x0000007c #define PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN6_LSB 8 #define PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN6_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN6 RSSI of RX PPDU on chain 6 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN6_OFFSET 0x0000007c #define PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN6_LSB 16 #define PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN6_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN6 RSSI of RX PPDU on chain 6 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN6_OFFSET 0x0000007c #define PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN6_LSB 24 #define PHYRX_RSSI_LEGACY_31_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN6_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN6 RSSI of RX PPDU on chain 6 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN6_OFFSET 0x00000080 #define PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN6_LSB 0 #define PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN6_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN6 RSSI of RX PPDU on chain 6 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN6_OFFSET 0x00000080 #define PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN6_LSB 8 #define PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN6_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN6 RSSI of RX PPDU on chain 6 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN6_OFFSET 0x00000080 #define PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN6_LSB 16 #define PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN6_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN6 RSSI of RX PPDU on chain 6 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN6_OFFSET 0x00000080 #define PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN6_LSB 24 #define PHYRX_RSSI_LEGACY_32_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN6_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN7 RSSI of RX PPDU on chain 7 of primary 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN7_OFFSET 0x00000084 #define PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN7_LSB 0 #define PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN7_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN7 RSSI of RX PPDU on chain 7 of extension 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN7_OFFSET 0x00000084 #define PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN7_LSB 8 #define PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN7_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN7 RSSI of RX PPDU on chain 7 of extension 40, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN7_OFFSET 0x00000084 #define PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN7_LSB 16 #define PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN7_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN7 RSSI of RX PPDU on chain 7 of extension 40, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN7_OFFSET 0x00000084 #define PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN7_LSB 24 #define PHYRX_RSSI_LEGACY_33_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN7_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN7 RSSI of RX PPDU on chain 7 of extension 80, low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN7_OFFSET 0x00000088 #define PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN7_LSB 0 #define PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN7_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN7 RSSI of RX PPDU on chain 7 of extension 80, low-high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN7_OFFSET 0x00000088 #define PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN7_LSB 8 #define PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN7_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN7 RSSI of RX PPDU on chain 7 of extension 80, high-low 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN7_OFFSET 0x00000088 #define PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN7_LSB 16 #define PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN7_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN7 RSSI of RX PPDU on chain 7 of extension 80, high 20 MHz bandwidth. Value of 0x80 indicates invalid. */ #define PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN7_OFFSET 0x00000088 #define PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN7_LSB 24 #define PHYRX_RSSI_LEGACY_34_PREAMBLE_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN7_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_35_PRE_RSSI_COMB Combined pre_rssi of all chains. Based on primary channel RSSI. RSSI is reported as 8b signed values. Nominally value is in dB units above or below the noisefloor(minCCApwr). The resolution can be: 1dB or 0.5dB. This is statically configured within the PHY and MAC In case of 1dB, the Range is: -128dB to 127dB In case of 0.5dB, the Range is: -64dB to 63.5dB */ #define PHYRX_RSSI_LEGACY_35_PRE_RSSI_COMB_OFFSET 0x0000008c #define PHYRX_RSSI_LEGACY_35_PRE_RSSI_COMB_LSB 0 #define PHYRX_RSSI_LEGACY_35_PRE_RSSI_COMB_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_35_RSSI_COMB Combined rssi of all chains. Based on primary channel RSSI. RSSI is reported as 8b signed values. Nominally value is in dB units above or below the noisefloor(minCCApwr). The resolution can be: 1dB or 0.5dB. This is statically configured within the PHY and MAC In case of 1dB, the Range is: -128dB to 127dB In case of 0.5dB, the Range is: -64dB to 63.5dB */ #define PHYRX_RSSI_LEGACY_35_RSSI_COMB_OFFSET 0x0000008c #define PHYRX_RSSI_LEGACY_35_RSSI_COMB_LSB 8 #define PHYRX_RSSI_LEGACY_35_RSSI_COMB_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_35_NORMALIZED_PRE_RSSI_COMB Combined pre_rssi of all chains, but normalized back to a single chain. This avoids PDG from having to evaluate this in combination with receive chain mask and perform all kinds of pre-processing algorithms. Based on primary channel RSSI. RSSI is reported as 8b signed values. Nominally value is in dB units above or below the noisefloor(minCCApwr). The resolution can be: 1dB or 0.5dB. This is statically configured within the PHY and MAC In case of 1dB, the Range is: -128dB to 127dB In case of 0.5dB, the Range is: -64dB to 63.5dB */ #define PHYRX_RSSI_LEGACY_35_NORMALIZED_PRE_RSSI_COMB_OFFSET 0x0000008c #define PHYRX_RSSI_LEGACY_35_NORMALIZED_PRE_RSSI_COMB_LSB 16 #define PHYRX_RSSI_LEGACY_35_NORMALIZED_PRE_RSSI_COMB_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_35_NORMALIZED_RSSI_COMB Combined rssi of all chains, but normalized back to a single chain. This avoids PDG from having to evaluate this in combination with receive chain mask and perform all kinds of pre-processing algorithms. Based on primary channel RSSI. RSSI is reported as 8b signed values. Nominally value is in dB units above or below the noisefloor(minCCApwr). The resolution can be: 1dB or 0.5dB. This is statically configured within the PHY and MAC In case of 1dB, the Range is: -128dB to 127dB In case of 0.5dB, the Range is: -64dB to 63.5dB */ #define PHYRX_RSSI_LEGACY_35_NORMALIZED_RSSI_COMB_OFFSET 0x0000008c #define PHYRX_RSSI_LEGACY_35_NORMALIZED_RSSI_COMB_LSB 24 #define PHYRX_RSSI_LEGACY_35_NORMALIZED_RSSI_COMB_MASK 0xff000000 /* Description PHYRX_RSSI_LEGACY_36_RSSI_COMB_PPDU Combined rssi of all chains, based on active RUs/subchannels, a.k.a. rssi_pkt_bw_mac RSSI is reported as 8b signed values. Nominally value is in dB units above or below the noisefloor(minCCApwr). The resolution can be: 1dB or 0.5dB. This is statically configured within the PHY and MAC In case of 1dB, the Range is: -128dB to 127dB In case of 0.5dB, the Range is: -64dB to 63.5dB When packet BW is 20 MHz, rssi_comb_ppdu = rssi_comb. When packet BW > 20 MHz, rssi_comb < rssi_comb_ppdu because rssi_comb only includes power of primary 20 MHz while rssi_comb_ppdu includes power of active RUs/subchannels. */ #define PHYRX_RSSI_LEGACY_36_RSSI_COMB_PPDU_OFFSET 0x00000090 #define PHYRX_RSSI_LEGACY_36_RSSI_COMB_PPDU_LSB 0 #define PHYRX_RSSI_LEGACY_36_RSSI_COMB_PPDU_MASK 0x000000ff /* Description PHYRX_RSSI_LEGACY_36_RSSI_DB_TO_DBM_OFFSET Offset between 'dB' and 'dBm' values. SW can use this value to convert RSSI 'dBm' values back to 'dB,' and report both the values. When rssi_db_to_dbm_offset = 0, all rssi_xxx fields are defined in dB. When rssi_db_to_dbm_offset is a large negative value, all rssi_xxx fields are defined in dBm. */ #define PHYRX_RSSI_LEGACY_36_RSSI_DB_TO_DBM_OFFSET_OFFSET 0x00000090 #define PHYRX_RSSI_LEGACY_36_RSSI_DB_TO_DBM_OFFSET_LSB 8 #define PHYRX_RSSI_LEGACY_36_RSSI_DB_TO_DBM_OFFSET_MASK 0x0000ff00 /* Description PHYRX_RSSI_LEGACY_36_RSSI_FOR_SPATIAL_REUSE RSSI to be used by HWSCH for transmit (power) selection during an SR opportunity, reported as an 8-bit signed value The resolution can be: 1dB or 0.5dB. This is statically configured within the PHY and MAC In case of 1dB, the Range is: -128dB to 127dB In case of 0.5dB, the Range is: -64dB to 63.5dB As per 802.11ax draft 3.3 subsubclauses 27.10.2.2/3, for OBSS PD spatial reuse, the received signal strength level should be measured from the L-STF or L-LTF (but not L-SIG), just as measured to indicate CCA. Also, as per 802.11ax draft 3.3, for OBSS PD spatial reuse, MAC should compare this value with its programmed OBSS_PDlevel scaled from 20 MHz to the Rx PPDU bandwidth. Since MAC does not do this scaling, PHY is instead expected to normalize the reported RSSI to 20 MHz. Also as per 802.11ax draft 3.3 subsubclause 27.10.3.2, for SRP spatial reuse, the received power level should be measured from the L-STF or L-LTF (but not L-SIG) and normalized to 20 MHz. */ #define PHYRX_RSSI_LEGACY_36_RSSI_FOR_SPATIAL_REUSE_OFFSET 0x00000090 #define PHYRX_RSSI_LEGACY_36_RSSI_FOR_SPATIAL_REUSE_LSB 16 #define PHYRX_RSSI_LEGACY_36_RSSI_FOR_SPATIAL_REUSE_MASK 0x00ff0000 /* Description PHYRX_RSSI_LEGACY_36_RSSI_FOR_TRIGGER_RESP RSSI to be used by PDG for transmit (power) selection during trigger response, reported as an 8-bit signed value The resolution can be: 1dB or 0.5dB. This is statically configured within the PHY and MAC In case of 1dB, the Range is: -128dB to 127dB In case of 0.5dB, the Range is: -64dB to 63.5dB As per 802.11ax draft 3.3 subsubclauses 28.3.14.2, for trigger response, the received power should be measured from the non-HE portion of the preamble of the PPDU containing the trigger, normalized to 20 MHz, averaged over the antennas over which the average pathloss is being computed. */ #define PHYRX_RSSI_LEGACY_36_RSSI_FOR_TRIGGER_RESP_OFFSET 0x00000090 #define PHYRX_RSSI_LEGACY_36_RSSI_FOR_TRIGGER_RESP_LSB 24 #define PHYRX_RSSI_LEGACY_36_RSSI_FOR_TRIGGER_RESP_MASK 0xff000000 #endif // _PHYRX_RSSI_LEGACY_H_