xref: /wlan-driver/qca-wifi-host-cmn/umac/dfs/dispatcher/inc/wlan_dfs_public_struct.h (revision 5113495b16420b49004c444715d2daae2066e7dc) !
1 /*
2  * Copyright (c) 2017-2020 The Linux Foundation. All rights reserved.
3  * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
4  *
5  * Permission to use, copy, modify, and/or distribute this software for
6  * any purpose with or without fee is hereby granted, provided that the
7  * above copyright notice and this permission notice appear in all
8  * copies.
9  *
10  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
11  * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
12  * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
13  * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
14  * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
15  * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
16  * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
17  * PERFORMANCE OF THIS SOFTWARE.
18  */
19 
20 /**
21  * DOC: wlan_dfs_public_struct.h
22  * This file contains DFS data structures
23  */
24 
25 #ifndef __WLAN_DFS_PUBLIC_STRUCT_H_
26 #define __WLAN_DFS_PUBLIC_STRUCT_H_
27 #include <wlan_cmn.h>
28 /* TODO: This structure has many redundant variables, needs cleanup */
29 /**
30  * struct radar_found_info - radar found info
31  * @pdev_id:        pdev id.
32  * @detection_mode: 0 indicates RADAR detected, non-zero indicates debug mode.
33  * @freq_offset:    frequency offset.
34  * @chan_width:     channel width.
35  * @detector_id:    detector id for full-offload.
36  * @segment_id:     segment id (same as detector_id) for partial-offload.
37  * @timestamp:      timestamp (Time when filter match is found in Firmware).
38  * @is_chirp:       is chirp or not.
39  * @chan_freq:      channel frequency (Primary channel frequency).
40  * @radar_freq:     radar frequency (Is it same as '@chan_freq'?).
41  * @sidx:           sidx value (same as freq_offset).
42  * @is_full_bw_nol: Is full bandwidth needed to put to NOL.
43  */
44 struct radar_found_info {
45 	uint32_t pdev_id;
46 	uint32_t detection_mode;
47 	int32_t freq_offset;
48 	uint32_t chan_width;
49 	uint32_t detector_id;
50 	uint32_t segment_id;
51 	uint32_t timestamp;
52 	uint32_t is_chirp;
53 	uint32_t chan_freq;
54 	uint32_t radar_freq;
55 	int32_t  sidx;
56 	uint8_t is_full_bw_nol;
57 };
58 
59 /**
60  * struct dfs_acs_info - acs info, ch range
61  * @acs_mode: to enable/disable acs 1/0.
62  * @chan_freq_list: channel frequency list
63  * @num_of_channel: number of channel in ACS channel list
64  */
65 struct dfs_acs_info {
66 	uint8_t acs_mode;
67 	uint32_t *chan_freq_list;
68 	uint8_t num_of_channel;
69 };
70 
71 /**
72  * struct radar_event_info - radar event info.
73  * @pulse_is_chirp: flag to indicate if this pulse is chirp.
74  * @pulse_center_freq: the center frequency of the radar pulse detected, KHz.
75  * @pulse_duration: the duaration of the pulse in us.
76  * @rssi: RSSI recorded in the ppdu.
77  * @pulse_detect_ts: timestamp indicates the time when DFS pulse is detected.
78  * @upload_fullts_low: low 32 tsf timestamp get from MAC tsf timer indicates
79  *  the time that the radar event uploading to host.
80  * @upload_fullts_high: high 32 tsf timestamp get from MAC tsf timer indicates
81  *  the time that the radar event uploading to host.
82  * @peak_sidx: index of peak magnitude bin (signed)
83  * @pdev_id: pdev_id for identifying the MAC.
84  * @delta_diff: Delta diff value.
85  * @delta_peak: Delta peak value.
86  * @psidx_diff: Psidx diff value.
87  * @is_psidx_diff_valid: Does fw send valid psidx diff.
88  */
89 struct radar_event_info {
90 	uint8_t  pulse_is_chirp;
91 	uint32_t pulse_center_freq;
92 	uint32_t pulse_duration;
93 	uint8_t  rssi;
94 	uint32_t pulse_detect_ts;
95 	uint32_t upload_fullts_low;
96 	uint32_t upload_fullts_high;
97 	int32_t  peak_sidx;
98 	uint8_t  pdev_id;
99 	uint8_t  delta_diff;
100 	int8_t   delta_peak;
101 	int8_t   psidx_diff;
102 	int8_t   is_psidx_diff_valid;
103 };
104 
105 /**
106  * struct dfs_user_config - user configuration required for for DFS.
107  * @dfs_is_phyerr_filter_offload: flag to indicate DFS phyerr filtering offload.
108  */
109 struct dfs_user_config {
110 	bool dfs_is_phyerr_filter_offload;
111 };
112 
113 /**
114  * struct dfs_radar_found_params - radar found parameters.
115  * @pri_min: Minimum PRI of detected radar pulse.
116  * @pri_max: Max PRI of detected radar pulse.
117  * @duration_min: Min duration of detected pulse in us.
118  * @duration_max: Max duration of detected pulse in us.
119  * @sidx_min: Min softare index of detected radar pulse.
120  * @sidx_max: Max software index of detected radar pulse.
121  */
122 struct dfs_radar_found_params {
123 	u_int32_t pri_min;
124 	u_int32_t pri_max;
125 	u_int32_t duration_min;
126 	u_int32_t duration_max;
127 	u_int32_t sidx_min;
128 	u_int32_t sidx_max;
129 };
130 
131 /**
132  * enum adfs_ocac_mode - Various Off-Channel CAC modes.
133  * @QUICK_OCAC_MODE: Used for OCAC where the CAC timeout value is finite.
134  *                   This is also known as PreCAC.
135  * @EXTENSIVE_OCAC_MODE:  Extensive OCAC.
136  * @QUICK_RCAC_MODE: Used for RollingCAC where the timeout value is assumed to
137  *                   be infinite by the Firmware code, that is, the FW has to
138  *                   be on the agile channel until host stop/aborts the agile
139  *                   CAC.
140  */
141 enum adfs_ocac_mode {
142 	QUICK_OCAC_MODE = 0,
143 	EXTENSIVE_OCAC_MODE,
144 	QUICK_RCAC_MODE,
145 };
146 
147 /**
148  * struct dfs_agile_cac_params - Agile DFS-CAC parameters.
149  * @precac_chan:           Agile preCAC channel.
150  * @precac_center_freq_1:  Agile preCAC channel frequency in MHz for 20/40/80/
151  *                         160 and left center frequency(5690MHz) for restricted
152  *                         80p80.
153  * @precac_center_freq_2:  Second segment Agile frequency if applicable. 0 for
154  *                         20/40/80/160 and right center frequency(5775MHz) for
155  *                         restricted 80p80.
156  * @precac_chwidth:        Agile preCAC channel width.
157  * @min_precac_timeout:    Minimum agile preCAC timeout.
158  * @max_precac_timeout:    Maximum agile preCAC timeout.
159  * @ocac_mode:             Off-Channel CAC mode.
160  */
161 struct dfs_agile_cac_params {
162 	uint8_t precac_chan;
163 	uint16_t precac_center_freq_1;
164 	uint16_t precac_center_freq_2;
165 	enum phy_ch_width precac_chwidth;
166 	uint32_t min_precac_timeout;
167 	uint32_t max_precac_timeout;
168 	enum adfs_ocac_mode ocac_mode;
169 };
170 
171 /* The first DFS channel number is 52 and the last DFS channel number is 161(in
172  * case of ETSI EN302502). So, the array size is taken as (161 - 52) / 4 ~= 30.
173  */
174 #define NUM_DFS_CHANS 30
175 
176 /**
177  * enum channel_dfs_state - DFS  channel states.
178  * @CH_DFS_S_INVALID: The DFS state for invalid channel numbers that are not
179  *                    part of the radio's channel list.
180  * @CH_DFS_S_CAC_REQ: Indicates that the CAC/Off-channel CAC has to performed
181  *                    before Tx on the DFS channel.
182  * @CH_DFS_S_CAC_STARTED: Indicates that the CAC has been started for the DFS
183  *                        channel.
184  * @CH_DFS_S_CAC_COMPLETED: Indicates that the CAC has been completed for the
185  *                          DFS channel.
186  * @CH_DFS_S_NOL: Indicates that the DFS channel is in NOL.
187  * @CH_DFS_S_PRECAC_STARTED: Indicates that the PreCAC has been started for the
188  *                           DFS channel.
189  * @CH_DFS_S_PRECAC_COMPLETED: Indicates that the PreCAC has been completed for
190  *                             the DFS channel.
191  * @CH_DFS_S_NON_DFS: Indicates that it is a non-DFS channel.
192  */
193 enum channel_dfs_state {
194 	CH_DFS_S_INVALID,
195 	CH_DFS_S_CAC_REQ,
196 	CH_DFS_S_CAC_STARTED,
197 	CH_DFS_S_CAC_COMPLETED,
198 	CH_DFS_S_NOL,
199 	CH_DFS_S_PRECAC_STARTED,
200 	CH_DFS_S_PRECAC_COMPLETED,
201 	CH_DFS_S_NON_DFS,
202 };
203 
204 /**
205  * enum ocac_status_type - Enum for OCAC status for Agile DFS.
206  * @OCAC_SUCCESS:       OCAC completed successfully.
207  * @OCAC_RESET:         OCAC status was reset.
208  * @OCAC_CANCEL:        OCAC canceled.
209  */
210 enum ocac_status_type {
211 	OCAC_SUCCESS = 0,
212 	OCAC_RESET,
213 	OCAC_CANCEL,
214 };
215 #endif
216