1menuconfig EXTCON
2	tristate "External Connector Class (extcon) support"
3	help
4	  Say Y here to enable external connector class (extcon) support.
5	  This allows monitoring external connectors by userspace
6	  via sysfs and uevent and supports external connectors with
7	  multiple states; i.e., an extcon that may have multiple
8	  cables attached. For example, an external connector of a device
9	  may be used to connect an HDMI cable and a AC adaptor, and to
10	  host USB ports. Many of 30-pin connectors including PDMI are
11	  also good examples.
12
13if EXTCON
14
15comment "Extcon Device Drivers"
16
17config EXTCON_ADC_JACK
18	tristate "ADC Jack extcon support"
19	depends on IIO
20	help
21	  Say Y here to enable extcon device driver based on ADC values.
22
23config EXTCON_ARIZONA
24	tristate "Wolfson Arizona EXTCON support"
25	depends on MFD_ARIZONA && INPUT && SND_SOC
26	help
27	  Say Y here to enable support for external accessory detection
28	  with Wolfson Arizona devices. These are audio CODECs with
29	  advanced audio accessory detection support.
30
31config EXTCON_AXP288
32	tristate "X-Power AXP288 EXTCON support"
33	depends on MFD_AXP20X && USB_SUPPORT && X86
34	select USB_ROLE_SWITCH
35	help
36	  Say Y here to enable support for USB peripheral detection
37	  and USB MUX switching by X-Power AXP288 PMIC.
38
39config EXTCON_GPIO
40	tristate "GPIO extcon support"
41	depends on GPIOLIB || COMPILE_TEST
42	help
43	  Say Y here to enable GPIO based extcon support. Note that GPIO
44	  extcon supports single state per extcon instance.
45
46config EXTCON_INTEL_INT3496
47	tristate "Intel INT3496 ACPI device extcon driver"
48	depends on GPIOLIB && ACPI && (X86 || COMPILE_TEST)
49	help
50	  Say Y here to enable extcon support for USB OTG ports controlled by
51	  an Intel INT3496 ACPI device.
52
53	  This ACPI device is typically found on Intel Baytrail or Cherrytrail
54	  based tablets, or other Baytrail / Cherrytrail devices.
55
56config EXTCON_INTEL_CHT_WC
57	tristate "Intel Cherrytrail Whiskey Cove PMIC extcon driver"
58	depends on INTEL_SOC_PMIC_CHTWC
59	help
60	  Say Y here to enable extcon support for charger detection / control
61	  on the Intel Cherrytrail Whiskey Cove PMIC.
62
63config EXTCON_MAX14577
64	tristate "Maxim MAX14577/77836 EXTCON Support"
65	depends on MFD_MAX14577
66	select IRQ_DOMAIN
67	select REGMAP_I2C
68	help
69	  If you say yes here you get support for the MUIC device of
70	  Maxim MAX14577/77836. The MAX14577/77836 MUIC is a USB port accessory
71	  detector and switch.
72
73config EXTCON_MAX3355
74	tristate "Maxim MAX3355 USB OTG EXTCON Support"
75	depends on GPIOLIB || COMPILE_TEST
76	help
77	  If you say yes here you get support for the USB OTG role detection by
78	  MAX3355. The MAX3355 chip integrates a charge pump and comparators to
79	  enable a system with an integrated USB OTG dual-role transceiver to
80	  function as an USB OTG dual-role device.
81
82config EXTCON_MAX77693
83	tristate "Maxim MAX77693 EXTCON Support"
84	depends on MFD_MAX77693 && INPUT
85	select IRQ_DOMAIN
86	select REGMAP_I2C
87	help
88	  If you say yes here you get support for the MUIC device of
89	  Maxim MAX77693 PMIC. The MAX77693 MUIC is a USB port accessory
90	  detector and switch.
91
92config EXTCON_MAX77843
93	tristate "Maxim MAX77843 EXTCON Support"
94	depends on MFD_MAX77843
95	select IRQ_DOMAIN
96	select REGMAP_I2C
97	help
98	  If you say yes here you get support for the MUIC device of
99	  Maxim MAX77843. The MAX77843 MUIC is a USB port accessory
100	  detector add switch.
101
102config EXTCON_MAX8997
103	tristate "Maxim MAX8997 EXTCON Support"
104	depends on MFD_MAX8997 && IRQ_DOMAIN
105	help
106	  If you say yes here you get support for the MUIC device of
107	  Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory
108	  detector and switch.
109
110config EXTCON_PALMAS
111	tristate "Palmas USB EXTCON support"
112	depends on MFD_PALMAS
113	help
114	  Say Y here to enable support for USB peripheral and USB host
115	  detection by palmas usb.
116
117config EXTCON_QCOM_SPMI_MISC
118	tristate "Qualcomm USB extcon support"
119	depends on ARCH_QCOM || COMPILE_TEST
120	help
121	  Say Y here to enable SPMI PMIC based USB cable detection
122	  support on Qualcomm PMICs such as PM8941.
123
124config EXTCON_RT8973A
125	tristate "Richtek RT8973A EXTCON support"
126	depends on I2C
127	select IRQ_DOMAIN
128	select REGMAP_I2C
129	select REGMAP_IRQ
130	help
131	  If you say yes here you get support for the MUIC device of
132	  Richtek RT8973A. The RT8973A is a USB port accessory detector
133	  and switch that is optimized to protect low voltage system
134	  from abnormal high input voltage (up to 28V).
135
136config EXTCON_SM5502
137	tristate "Silicon Mitus SM5502 EXTCON support"
138	depends on I2C
139	select IRQ_DOMAIN
140	select REGMAP_I2C
141	select REGMAP_IRQ
142	help
143	  If you say yes here you get support for the MUIC device of
144	  Silicon Mitus SM5502. The SM5502 is a USB port accessory
145	  detector and switch.
146
147config EXTCON_USB_GPIO
148	tristate "USB GPIO extcon support"
149	depends on GPIOLIB || COMPILE_TEST
150	help
151	  Say Y here to enable GPIO based USB cable detection extcon support.
152	  Used typically if GPIO is used for USB ID pin detection.
153
154config EXTCON_USBC_CROS_EC
155	tristate "ChromeOS Embedded Controller EXTCON support"
156	depends on MFD_CROS_EC
157	help
158	  Say Y here to enable USB Type C cable detection extcon support when
159	  using Chrome OS EC based USB Type-C ports.
160
161endif
162