1 /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
2 /*
3  * ipmi.h
4  *
5  * MontaVista IPMI interface
6  *
7  * Author: MontaVista Software, Inc.
8  *         Corey Minyard <minyard@mvista.com>
9  *         source@mvista.com
10  *
11  * Copyright 2002 MontaVista Software Inc.
12  *
13  */
14 
15 #ifndef _UAPI__LINUX_IPMI_H
16 #define _UAPI__LINUX_IPMI_H
17 
18 #include <linux/ipmi_msgdefs.h>
19 #include <linux/compiler.h>
20 
21 /*
22  * This file describes an interface to an IPMI driver.  You have to
23  * have a fairly good understanding of IPMI to use this, so go read
24  * the specs first before actually trying to do anything.
25  *
26  * With that said, this driver provides a multi-user interface to the
27  * IPMI driver, and it allows multiple IPMI physical interfaces below
28  * the driver.  The physical interfaces bind as a lower layer on the
29  * driver.  They appear as interfaces to the application using this
30  * interface.
31  *
32  * Multi-user means that multiple applications may use the driver,
33  * send commands, receive responses, etc.  The driver keeps track of
34  * commands the user sends and tracks the responses.  The responses
35  * will go back to the application that send the command.  If the
36  * response doesn't come back in time, the driver will return a
37  * timeout error response to the application.  Asynchronous events
38  * from the BMC event queue will go to all users bound to the driver.
39  * The incoming event queue in the BMC will automatically be flushed
40  * if it becomes full and it is queried once a second to see if
41  * anything is in it.  Incoming commands to the driver will get
42  * delivered as commands.
43  */
44 
45 /*
46  * This is an overlay for all the address types, so it's easy to
47  * determine the actual address type.  This is kind of like addresses
48  * work for sockets.
49  */
50 #define IPMI_MAX_ADDR_SIZE 32
51 struct ipmi_addr {
52 	 /* Try to take these from the "Channel Medium Type" table
53 	    in section 6.5 of the IPMI 1.5 manual. */
54 	int   addr_type;
55 	short channel;
56 	char  data[IPMI_MAX_ADDR_SIZE];
57 };
58 
59 /*
60  * When the address is not used, the type will be set to this value.
61  * The channel is the BMC's channel number for the channel (usually
62  * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
63  */
64 #define IPMI_SYSTEM_INTERFACE_ADDR_TYPE	0x0c
65 struct ipmi_system_interface_addr {
66 	int           addr_type;
67 	short         channel;
68 	unsigned char lun;
69 };
70 
71 /* An IPMB Address. */
72 #define IPMI_IPMB_ADDR_TYPE		0x01
73 /* Used for broadcast get device id as described in section 17.9 of the
74    IPMI 1.5 manual. */
75 #define IPMI_IPMB_BROADCAST_ADDR_TYPE	0x41
76 struct ipmi_ipmb_addr {
77 	int           addr_type;
78 	short         channel;
79 	unsigned char slave_addr;
80 	unsigned char lun;
81 };
82 
83 /*
84  * A LAN Address.  This is an address to/from a LAN interface bridged
85  * by the BMC, not an address actually out on the LAN.
86  *
87  * A conscious decision was made here to deviate slightly from the IPMI
88  * spec.  We do not use rqSWID and rsSWID like it shows in the
89  * message.  Instead, we use remote_SWID and local_SWID.  This means
90  * that any message (a request or response) from another device will
91  * always have exactly the same address.  If you didn't do this,
92  * requests and responses from the same device would have different
93  * addresses, and that's not too cool.
94  *
95  * In this address, the remote_SWID is always the SWID the remote
96  * message came from, or the SWID we are sending the message to.
97  * local_SWID is always our SWID.  Note that having our SWID in the
98  * message is a little weird, but this is required.
99  */
100 #define IPMI_LAN_ADDR_TYPE		0x04
101 struct ipmi_lan_addr {
102 	int           addr_type;
103 	short         channel;
104 	unsigned char privilege;
105 	unsigned char session_handle;
106 	unsigned char remote_SWID;
107 	unsigned char local_SWID;
108 	unsigned char lun;
109 };
110 
111 
112 /*
113  * Channel for talking directly with the BMC.  When using this
114  * channel, This is for the system interface address type only.  FIXME
115  * - is this right, or should we use -1?
116  */
117 #define IPMI_BMC_CHANNEL  0xf
118 #define IPMI_NUM_CHANNELS 0x10
119 
120 /*
121  * Used to signify an "all channel" bitmask.  This is more than the
122  * actual number of channels because this is used in userland and
123  * will cover us if the number of channels is extended.
124  */
125 #define IPMI_CHAN_ALL     (~0)
126 
127 
128 /*
129  * A raw IPMI message without any addressing.  This covers both
130  * commands and responses.  The completion code is always the first
131  * byte of data in the response (as the spec shows the messages laid
132  * out).
133  */
134 struct ipmi_msg {
135 	unsigned char  netfn;
136 	unsigned char  cmd;
137 	unsigned short data_len;
138 	unsigned char  __user *data;
139 };
140 
141 struct kernel_ipmi_msg {
142 	unsigned char  netfn;
143 	unsigned char  cmd;
144 	unsigned short data_len;
145 	unsigned char  *data;
146 };
147 
148 /*
149  * Various defines that are useful for IPMI applications.
150  */
151 #define IPMI_INVALID_CMD_COMPLETION_CODE	0xC1
152 #define IPMI_TIMEOUT_COMPLETION_CODE		0xC3
153 #define IPMI_UNKNOWN_ERR_COMPLETION_CODE	0xff
154 
155 
156 /*
157  * Receive types for messages coming from the receive interface.  This
158  * is used for the receive in-kernel interface and in the receive
159  * IOCTL.
160  *
161  * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
162  * it allows you to get the message results when you send a response
163  * message.
164  */
165 #define IPMI_RESPONSE_RECV_TYPE		1 /* A response to a command */
166 #define IPMI_ASYNC_EVENT_RECV_TYPE	2 /* Something from the event queue */
167 #define IPMI_CMD_RECV_TYPE		3 /* A command from somewhere else */
168 #define IPMI_RESPONSE_RESPONSE_TYPE	4 /* The response for
169 					      a sent response, giving any
170 					      error status for sending the
171 					      response.  When you send a
172 					      response message, this will
173 					      be returned. */
174 #define IPMI_OEM_RECV_TYPE		5 /* The response for OEM Channels */
175 
176 /* Note that async events and received commands do not have a completion
177    code as the first byte of the incoming data, unlike a response. */
178 
179 
180 /*
181  * Modes for ipmi_set_maint_mode() and the userland IOCTL.  The AUTO
182  * setting is the default and means it will be set on certain
183  * commands.  Hard setting it on and off will override automatic
184  * operation.
185  */
186 #define IPMI_MAINTENANCE_MODE_AUTO	0
187 #define IPMI_MAINTENANCE_MODE_OFF	1
188 #define IPMI_MAINTENANCE_MODE_ON	2
189 
190 
191 
192 /*
193  * The userland interface
194  */
195 
196 /*
197  * The userland interface for the IPMI driver is a standard character
198  * device, with each instance of an interface registered as a minor
199  * number under the major character device.
200  *
201  * The read and write calls do not work, to get messages in and out
202  * requires ioctl calls because of the complexity of the data.  select
203  * and poll do work, so you can wait for input using the file
204  * descriptor, you just can use read to get it.
205  *
206  * In general, you send a command down to the interface and receive
207  * responses back.  You can use the msgid value to correlate commands
208  * and responses, the driver will take care of figuring out which
209  * incoming messages are for which command and find the proper msgid
210  * value to report.  You will only receive reponses for commands you
211  * send.  Asynchronous events, however, go to all open users, so you
212  * must be ready to handle these (or ignore them if you don't care).
213  *
214  * The address type depends upon the channel type.  When talking
215  * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
216  * (IPMI_UNUSED_ADDR_TYPE).  When talking to an IPMB channel, you must
217  * supply a valid IPMB address with the addr_type set properly.
218  *
219  * When talking to normal channels, the driver takes care of the
220  * details of formatting and sending messages on that channel.  You do
221  * not, for instance, have to format a send command, you just send
222  * whatever command you want to the channel, the driver will create
223  * the send command, automatically issue receive command and get even
224  * commands, and pass those up to the proper user.
225  */
226 
227 
228 /* The magic IOCTL value for this interface. */
229 #define IPMI_IOC_MAGIC 'i'
230 
231 
232 /* Messages sent to the interface are this format. */
233 struct ipmi_req {
234 	unsigned char __user *addr; /* Address to send the message to. */
235 	unsigned int  addr_len;
236 
237 	long    msgid; /* The sequence number for the message.  This
238 			  exact value will be reported back in the
239 			  response to this request if it is a command.
240 			  If it is a response, this will be used as
241 			  the sequence value for the response.  */
242 
243 	struct ipmi_msg msg;
244 };
245 /*
246  * Send a message to the interfaces.  error values are:
247  *   - EFAULT - an address supplied was invalid.
248  *   - EINVAL - The address supplied was not valid, or the command
249  *              was not allowed.
250  *   - EMSGSIZE - The message to was too large.
251  *   - ENOMEM - Buffers could not be allocated for the command.
252  */
253 #define IPMICTL_SEND_COMMAND		_IOR(IPMI_IOC_MAGIC, 13,	\
254 					     struct ipmi_req)
255 
256 /* Messages sent to the interface with timing parameters are this
257    format. */
258 struct ipmi_req_settime {
259 	struct ipmi_req req;
260 
261 	/* See ipmi_request_settime() above for details on these
262 	   values. */
263 	int          retries;
264 	unsigned int retry_time_ms;
265 };
266 /*
267  * Send a message to the interfaces with timing parameters.  error values
268  * are:
269  *   - EFAULT - an address supplied was invalid.
270  *   - EINVAL - The address supplied was not valid, or the command
271  *              was not allowed.
272  *   - EMSGSIZE - The message to was too large.
273  *   - ENOMEM - Buffers could not be allocated for the command.
274  */
275 #define IPMICTL_SEND_COMMAND_SETTIME	_IOR(IPMI_IOC_MAGIC, 21,	\
276 					     struct ipmi_req_settime)
277 
278 /* Messages received from the interface are this format. */
279 struct ipmi_recv {
280 	int     recv_type; /* Is this a command, response or an
281 			      asyncronous event. */
282 
283 	unsigned char __user *addr;    /* Address the message was from is put
284 				   here.  The caller must supply the
285 				   memory. */
286 	unsigned int  addr_len; /* The size of the address buffer.
287 				   The caller supplies the full buffer
288 				   length, this value is updated to
289 				   the actual message length when the
290 				   message is received. */
291 
292 	long    msgid; /* The sequence number specified in the request
293 			  if this is a response.  If this is a command,
294 			  this will be the sequence number from the
295 			  command. */
296 
297 	struct ipmi_msg msg; /* The data field must point to a buffer.
298 				The data_size field must be set to the
299 				size of the message buffer.  The
300 				caller supplies the full buffer
301 				length, this value is updated to the
302 				actual message length when the message
303 				is received. */
304 };
305 
306 /*
307  * Receive a message.  error values:
308  *  - EAGAIN - no messages in the queue.
309  *  - EFAULT - an address supplied was invalid.
310  *  - EINVAL - The address supplied was not valid.
311  *  - EMSGSIZE - The message to was too large to fit into the message buffer,
312  *               the message will be left in the buffer. */
313 #define IPMICTL_RECEIVE_MSG		_IOWR(IPMI_IOC_MAGIC, 12,	\
314 					      struct ipmi_recv)
315 
316 /*
317  * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
318  * will truncate the contents instead of leaving the data in the
319  * buffer.
320  */
321 #define IPMICTL_RECEIVE_MSG_TRUNC	_IOWR(IPMI_IOC_MAGIC, 11,	\
322 					      struct ipmi_recv)
323 
324 /* Register to get commands from other entities on this interface. */
325 struct ipmi_cmdspec {
326 	unsigned char netfn;
327 	unsigned char cmd;
328 };
329 
330 /*
331  * Register to receive a specific command.  error values:
332  *   - EFAULT - an address supplied was invalid.
333  *   - EBUSY - The netfn/cmd supplied was already in use.
334  *   - ENOMEM - could not allocate memory for the entry.
335  */
336 #define IPMICTL_REGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 14,	\
337 					     struct ipmi_cmdspec)
338 /*
339  * Unregister a registered command.  error values:
340  *  - EFAULT - an address supplied was invalid.
341  *  - ENOENT - The netfn/cmd was not found registered for this user.
342  */
343 #define IPMICTL_UNREGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 15,	\
344 					     struct ipmi_cmdspec)
345 
346 /*
347  * Register to get commands from other entities on specific channels.
348  * This way, you can only listen on specific channels, or have messages
349  * from some channels go to one place and other channels to someplace
350  * else.  The chans field is a bitmask, (1 << channel) for each channel.
351  * It may be IPMI_CHAN_ALL for all channels.
352  */
353 struct ipmi_cmdspec_chans {
354 	unsigned int netfn;
355 	unsigned int cmd;
356 	unsigned int chans;
357 };
358 
359 /*
360  * Register to receive a specific command on specific channels.  error values:
361  *   - EFAULT - an address supplied was invalid.
362  *   - EBUSY - One of the netfn/cmd/chans supplied was already in use.
363  *   - ENOMEM - could not allocate memory for the entry.
364  */
365 #define IPMICTL_REGISTER_FOR_CMD_CHANS	_IOR(IPMI_IOC_MAGIC, 28,	\
366 					     struct ipmi_cmdspec_chans)
367 /*
368  * Unregister some netfn/cmd/chans.  error values:
369  *  - EFAULT - an address supplied was invalid.
370  *  - ENOENT - None of the netfn/cmd/chans were found registered for this user.
371  */
372 #define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29,	\
373 					     struct ipmi_cmdspec_chans)
374 
375 /*
376  * Set whether this interface receives events.  Note that the first
377  * user registered for events will get all pending events for the
378  * interface.  error values:
379  *  - EFAULT - an address supplied was invalid.
380  */
381 #define IPMICTL_SET_GETS_EVENTS_CMD	_IOR(IPMI_IOC_MAGIC, 16, int)
382 
383 /*
384  * Set and get the slave address and LUN that we will use for our
385  * source messages.  Note that this affects the interface, not just
386  * this user, so it will affect all users of this interface.  This is
387  * so some initialization code can come in and do the OEM-specific
388  * things it takes to determine your address (if not the BMC) and set
389  * it for everyone else.  You should probably leave the LUN alone.
390  */
391 struct ipmi_channel_lun_address_set {
392 	unsigned short channel;
393 	unsigned char  value;
394 };
395 #define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
396 	_IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
397 #define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
398 	_IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
399 #define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
400 	_IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
401 #define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
402 	_IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
403 /* Legacy interfaces, these only set IPMB 0. */
404 #define IPMICTL_SET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 17, unsigned int)
405 #define IPMICTL_GET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 18, unsigned int)
406 #define IPMICTL_SET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 19, unsigned int)
407 #define IPMICTL_GET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 20, unsigned int)
408 
409 /*
410  * Get/set the default timing values for an interface.  You shouldn't
411  * generally mess with these.
412  */
413 struct ipmi_timing_parms {
414 	int          retries;
415 	unsigned int retry_time_ms;
416 };
417 #define IPMICTL_SET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 22, \
418 					     struct ipmi_timing_parms)
419 #define IPMICTL_GET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 23, \
420 					     struct ipmi_timing_parms)
421 
422 /*
423  * Set the maintenance mode.  See ipmi_set_maintenance_mode() above
424  * for a description of what this does.
425  */
426 #define IPMICTL_GET_MAINTENANCE_MODE_CMD	_IOR(IPMI_IOC_MAGIC, 30, int)
427 #define IPMICTL_SET_MAINTENANCE_MODE_CMD	_IOW(IPMI_IOC_MAGIC, 31, int)
428 
429 #endif /* _UAPI__LINUX_IPMI_H */
430