1 /* 2 * max8997.h - Driver for the Maxim 8997/8966 3 * 4 * Copyright (C) 2009-2010 Samsung Electrnoics 5 * MyungJoo Ham <myungjoo.ham@samsung.com> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 20 * 21 * This driver is based on max8998.h 22 * 23 * MAX8997 has PMIC, MUIC, HAPTIC, RTC, FLASH, and Fuel Gauge devices. 24 * Except Fuel Gauge, every device shares the same I2C bus and included in 25 * this mfd driver. Although the fuel gauge is included in the chip, it is 26 * excluded from the driver because a) it has a different I2C bus from 27 * others and b) it can be enabled simply by using MAX17042 driver. 28 */ 29 30 #ifndef __LINUX_MFD_MAX8998_H 31 #define __LINUX_MFD_MAX8998_H 32 33 #include <linux/regulator/consumer.h> 34 35 /* MAX8997/8966 regulator IDs */ 36 enum max8998_regulators { 37 MAX8997_LDO1 = 0, 38 MAX8997_LDO2, 39 MAX8997_LDO3, 40 MAX8997_LDO4, 41 MAX8997_LDO5, 42 MAX8997_LDO6, 43 MAX8997_LDO7, 44 MAX8997_LDO8, 45 MAX8997_LDO9, 46 MAX8997_LDO10, 47 MAX8997_LDO11, 48 MAX8997_LDO12, 49 MAX8997_LDO13, 50 MAX8997_LDO14, 51 MAX8997_LDO15, 52 MAX8997_LDO16, 53 MAX8997_LDO17, 54 MAX8997_LDO18, 55 MAX8997_LDO21, 56 MAX8997_BUCK1, 57 MAX8997_BUCK2, 58 MAX8997_BUCK3, 59 MAX8997_BUCK4, 60 MAX8997_BUCK5, 61 MAX8997_BUCK6, 62 MAX8997_BUCK7, 63 MAX8997_EN32KHZ_AP, 64 MAX8997_EN32KHZ_CP, 65 MAX8997_ENVICHG, 66 MAX8997_ESAFEOUT1, 67 MAX8997_ESAFEOUT2, 68 MAX8997_CHARGER_CV, /* control MBCCV of MBCCTRL3 */ 69 MAX8997_CHARGER, /* charger current, MBCCTRL4 */ 70 MAX8997_CHARGER_TOPOFF, /* MBCCTRL5 */ 71 72 MAX8997_REG_MAX, 73 }; 74 75 struct max8997_regulator_data { 76 int id; 77 struct regulator_init_data *initdata; 78 struct device_node *reg_node; 79 }; 80 81 struct max8997_muic_reg_data { 82 u8 addr; 83 u8 data; 84 }; 85 86 /** 87 * struct max8997_muic_platform_data 88 * @init_data: array of max8997_muic_reg_data 89 * used for initializing registers of MAX8997 MUIC device 90 * @num_init_data: array size of init_data 91 */ 92 struct max8997_muic_platform_data { 93 struct max8997_muic_reg_data *init_data; 94 int num_init_data; 95 96 /* Check cable state after certain delay */ 97 int detcable_delay_ms; 98 99 /* 100 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB 101 * h/w path of COMP2/COMN1 on CONTROL1 register. 102 */ 103 int path_usb; 104 int path_uart; 105 }; 106 107 enum max8997_haptic_motor_type { 108 MAX8997_HAPTIC_ERM, 109 MAX8997_HAPTIC_LRA, 110 }; 111 112 enum max8997_haptic_pulse_mode { 113 MAX8997_EXTERNAL_MODE, 114 MAX8997_INTERNAL_MODE, 115 }; 116 117 enum max8997_haptic_pwm_divisor { 118 MAX8997_PWM_DIVISOR_32, 119 MAX8997_PWM_DIVISOR_64, 120 MAX8997_PWM_DIVISOR_128, 121 MAX8997_PWM_DIVISOR_256, 122 }; 123 124 /** 125 * max8997_haptic_platform_data 126 * @pwm_channel_id: channel number of PWM device 127 * valid for MAX8997_EXTERNAL_MODE 128 * @pwm_period: period in nano second for PWM device 129 * valid for MAX8997_EXTERNAL_MODE 130 * @type: motor type 131 * @mode: pulse mode 132 * MAX8997_EXTERNAL_MODE: external PWM device is used to control motor 133 * MAX8997_INTERNAL_MODE: internal pulse generator is used to control motor 134 * @pwm_divisor: divisor for external PWM device 135 * @internal_mode_pattern: internal mode pattern for internal mode 136 * [0 - 3]: valid pattern number 137 * @pattern_cycle: the number of cycles of the waveform 138 * for the internal mode pattern 139 * [0 - 15]: available cycles 140 * @pattern_signal_period: period of the waveform for the internal mode pattern 141 * [0 - 255]: available period 142 */ 143 struct max8997_haptic_platform_data { 144 unsigned int pwm_channel_id; 145 unsigned int pwm_period; 146 147 enum max8997_haptic_motor_type type; 148 enum max8997_haptic_pulse_mode mode; 149 enum max8997_haptic_pwm_divisor pwm_divisor; 150 151 unsigned int internal_mode_pattern; 152 unsigned int pattern_cycle; 153 unsigned int pattern_signal_period; 154 }; 155 156 enum max8997_led_mode { 157 MAX8997_NONE, 158 MAX8997_FLASH_MODE, 159 MAX8997_MOVIE_MODE, 160 MAX8997_FLASH_PIN_CONTROL_MODE, 161 MAX8997_MOVIE_PIN_CONTROL_MODE, 162 }; 163 164 /** 165 * struct max8997_led_platform_data 166 * The number of LED devices for MAX8997 is two 167 * @mode: LED mode for each LED device 168 * @brightness: initial brightness for each LED device 169 * range: 170 * [0 - 31]: MAX8997_FLASH_MODE and MAX8997_FLASH_PIN_CONTROL_MODE 171 * [0 - 15]: MAX8997_MOVIE_MODE and MAX8997_MOVIE_PIN_CONTROL_MODE 172 */ 173 struct max8997_led_platform_data { 174 enum max8997_led_mode mode[2]; 175 u8 brightness[2]; 176 }; 177 178 struct max8997_platform_data { 179 /* IRQ */ 180 int ono; 181 182 /* ---- PMIC ---- */ 183 struct max8997_regulator_data *regulators; 184 int num_regulators; 185 186 /* 187 * SET1~3 DVS GPIOs control Buck1, 2, and 5 simultaneously. Therefore, 188 * With buckx_gpiodvs enabled, the buckx cannot be controlled 189 * independently. To control buckx (of 1, 2, and 5) independently, 190 * disable buckx_gpiodvs and control with BUCKxDVS1 register. 191 * 192 * When buckx_gpiodvs and bucky_gpiodvs are both enabled, set_voltage 193 * on buckx will change the voltage of bucky at the same time. 194 * 195 */ 196 bool ignore_gpiodvs_side_effect; 197 int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */ 198 int buck125_default_idx; /* Default value of SET1, 2, 3 */ 199 unsigned int buck1_voltage[8]; /* buckx_voltage in uV */ 200 bool buck1_gpiodvs; 201 unsigned int buck2_voltage[8]; 202 bool buck2_gpiodvs; 203 unsigned int buck5_voltage[8]; 204 bool buck5_gpiodvs; 205 206 /* ---- Charger control ---- */ 207 /* eoc stands for 'end of charge' */ 208 int eoc_mA; /* 50 ~ 200mA by 10mA step */ 209 /* charge Full Timeout */ 210 int timeout; /* 0 (no timeout), 5, 6, 7 hours */ 211 212 /* ---- MUIC ---- */ 213 struct max8997_muic_platform_data *muic_pdata; 214 215 /* ---- HAPTIC ---- */ 216 struct max8997_haptic_platform_data *haptic_pdata; 217 218 /* RTC: Not implemented */ 219 /* ---- LED ---- */ 220 struct max8997_led_platform_data *led_pdata; 221 }; 222 223 #endif /* __LINUX_MFD_MAX8998_H */ 224