1 /*
2  *
3  * Intel Management Engine Interface (Intel MEI) Linux driver
4  * Copyright (c) 2003-2012, Intel Corporation.
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  */
16 
17 #ifndef _MEI_HW_TYPES_H_
18 #define _MEI_HW_TYPES_H_
19 
20 #include <linux/uuid.h>
21 
22 /*
23  * Timeouts in Seconds
24  */
25 #define MEI_HW_READY_TIMEOUT        2  /* Timeout on ready message */
26 #define MEI_CONNECT_TIMEOUT         3  /* HPS: at least 2 seconds */
27 
28 #define MEI_CL_CONNECT_TIMEOUT     15  /* HPS: Client Connect Timeout */
29 #define MEI_CLIENTS_INIT_TIMEOUT   15  /* HPS: Clients Enumeration Timeout */
30 
31 #define MEI_PGI_TIMEOUT             1  /* PG Isolation time response 1 sec */
32 #define MEI_D0I3_TIMEOUT            5  /* D0i3 set/unset max response time */
33 #define MEI_HBM_TIMEOUT             1  /* 1 second */
34 
35 /*
36  * MEI Version
37  */
38 #define HBM_MINOR_VERSION                   0
39 #define HBM_MAJOR_VERSION                   2
40 
41 /*
42  * MEI version with PGI support
43  */
44 #define HBM_MINOR_VERSION_PGI               1
45 #define HBM_MAJOR_VERSION_PGI               1
46 
47 /*
48  * MEI version with Dynamic clients support
49  */
50 #define HBM_MINOR_VERSION_DC               0
51 #define HBM_MAJOR_VERSION_DC               2
52 
53 /*
54  * MEI version with immediate reply to enum request support
55  */
56 #define HBM_MINOR_VERSION_IE               0
57 #define HBM_MAJOR_VERSION_IE               2
58 
59 /*
60  * MEI version with disconnect on connection timeout support
61  */
62 #define HBM_MINOR_VERSION_DOT              0
63 #define HBM_MAJOR_VERSION_DOT              2
64 
65 /*
66  * MEI version with notification support
67  */
68 #define HBM_MINOR_VERSION_EV               0
69 #define HBM_MAJOR_VERSION_EV               2
70 
71 /*
72  * MEI version with fixed address client support
73  */
74 #define HBM_MINOR_VERSION_FA               0
75 #define HBM_MAJOR_VERSION_FA               2
76 
77 /*
78  * MEI version with OS ver message support
79  */
80 #define HBM_MINOR_VERSION_OS               0
81 #define HBM_MAJOR_VERSION_OS               2
82 
83 /*
84  * MEI version with dma ring support
85  */
86 #define HBM_MINOR_VERSION_DR               1
87 #define HBM_MAJOR_VERSION_DR               2
88 
89 /* Host bus message command opcode */
90 #define MEI_HBM_CMD_OP_MSK                  0x7f
91 /* Host bus message command RESPONSE */
92 #define MEI_HBM_CMD_RES_MSK                 0x80
93 
94 /*
95  * MEI Bus Message Command IDs
96  */
97 #define HOST_START_REQ_CMD                  0x01
98 #define HOST_START_RES_CMD                  0x81
99 
100 #define HOST_STOP_REQ_CMD                   0x02
101 #define HOST_STOP_RES_CMD                   0x82
102 
103 #define ME_STOP_REQ_CMD                     0x03
104 
105 #define HOST_ENUM_REQ_CMD                   0x04
106 #define HOST_ENUM_RES_CMD                   0x84
107 
108 #define HOST_CLIENT_PROPERTIES_REQ_CMD      0x05
109 #define HOST_CLIENT_PROPERTIES_RES_CMD      0x85
110 
111 #define CLIENT_CONNECT_REQ_CMD              0x06
112 #define CLIENT_CONNECT_RES_CMD              0x86
113 
114 #define CLIENT_DISCONNECT_REQ_CMD           0x07
115 #define CLIENT_DISCONNECT_RES_CMD           0x87
116 
117 #define MEI_FLOW_CONTROL_CMD                0x08
118 
119 #define MEI_PG_ISOLATION_ENTRY_REQ_CMD      0x0a
120 #define MEI_PG_ISOLATION_ENTRY_RES_CMD      0x8a
121 #define MEI_PG_ISOLATION_EXIT_REQ_CMD       0x0b
122 #define MEI_PG_ISOLATION_EXIT_RES_CMD       0x8b
123 
124 #define MEI_HBM_ADD_CLIENT_REQ_CMD          0x0f
125 #define MEI_HBM_ADD_CLIENT_RES_CMD          0x8f
126 
127 #define MEI_HBM_NOTIFY_REQ_CMD              0x10
128 #define MEI_HBM_NOTIFY_RES_CMD              0x90
129 #define MEI_HBM_NOTIFICATION_CMD            0x11
130 
131 #define MEI_HBM_DMA_SETUP_REQ_CMD           0x12
132 #define MEI_HBM_DMA_SETUP_RES_CMD           0x92
133 
134 /*
135  * MEI Stop Reason
136  * used by hbm_host_stop_request.reason
137  */
138 enum mei_stop_reason_types {
139 	DRIVER_STOP_REQUEST = 0x00,
140 	DEVICE_D1_ENTRY = 0x01,
141 	DEVICE_D2_ENTRY = 0x02,
142 	DEVICE_D3_ENTRY = 0x03,
143 	SYSTEM_S1_ENTRY = 0x04,
144 	SYSTEM_S2_ENTRY = 0x05,
145 	SYSTEM_S3_ENTRY = 0x06,
146 	SYSTEM_S4_ENTRY = 0x07,
147 	SYSTEM_S5_ENTRY = 0x08
148 };
149 
150 
151 /**
152  * enum mei_hbm_status  - mei host bus messages return values
153  *
154  * @MEI_HBMS_SUCCESS           : status success
155  * @MEI_HBMS_CLIENT_NOT_FOUND  : client not found
156  * @MEI_HBMS_ALREADY_EXISTS    : connection already established
157  * @MEI_HBMS_REJECTED          : connection is rejected
158  * @MEI_HBMS_INVALID_PARAMETER : invalid parameter
159  * @MEI_HBMS_NOT_ALLOWED       : operation not allowed
160  * @MEI_HBMS_ALREADY_STARTED   : system is already started
161  * @MEI_HBMS_NOT_STARTED       : system not started
162  *
163  * @MEI_HBMS_MAX               : sentinel
164  */
165 enum mei_hbm_status {
166 	MEI_HBMS_SUCCESS           = 0,
167 	MEI_HBMS_CLIENT_NOT_FOUND  = 1,
168 	MEI_HBMS_ALREADY_EXISTS    = 2,
169 	MEI_HBMS_REJECTED          = 3,
170 	MEI_HBMS_INVALID_PARAMETER = 4,
171 	MEI_HBMS_NOT_ALLOWED       = 5,
172 	MEI_HBMS_ALREADY_STARTED   = 6,
173 	MEI_HBMS_NOT_STARTED       = 7,
174 
175 	MEI_HBMS_MAX
176 };
177 
178 
179 /*
180  * Client Connect Status
181  * used by hbm_client_connect_response.status
182  */
183 enum mei_cl_connect_status {
184 	MEI_CL_CONN_SUCCESS          = MEI_HBMS_SUCCESS,
185 	MEI_CL_CONN_NOT_FOUND        = MEI_HBMS_CLIENT_NOT_FOUND,
186 	MEI_CL_CONN_ALREADY_STARTED  = MEI_HBMS_ALREADY_EXISTS,
187 	MEI_CL_CONN_OUT_OF_RESOURCES = MEI_HBMS_REJECTED,
188 	MEI_CL_CONN_MESSAGE_SMALL    = MEI_HBMS_INVALID_PARAMETER,
189 	MEI_CL_CONN_NOT_ALLOWED      = MEI_HBMS_NOT_ALLOWED,
190 };
191 
192 /*
193  * Client Disconnect Status
194  */
195 enum  mei_cl_disconnect_status {
196 	MEI_CL_DISCONN_SUCCESS = MEI_HBMS_SUCCESS
197 };
198 
199 /**
200  * struct mei_msg_hdr - MEI BUS Interface Section
201  *
202  * @me_addr: device address
203  * @host_addr: host address
204  * @length: message length
205  * @reserved: reserved
206  * @dma_ring: message is on dma ring
207  * @internal: message is internal
208  * @msg_complete: last packet of the message
209  */
210 struct mei_msg_hdr {
211 	u32 me_addr:8;
212 	u32 host_addr:8;
213 	u32 length:9;
214 	u32 reserved:4;
215 	u32 dma_ring:1;
216 	u32 internal:1;
217 	u32 msg_complete:1;
218 } __packed;
219 
220 struct mei_bus_message {
221 	u8 hbm_cmd;
222 	u8 data[0];
223 } __packed;
224 
225 /**
226  * struct hbm_cl_cmd - client specific host bus command
227  *	CONNECT, DISCONNECT, and FlOW CONTROL
228  *
229  * @hbm_cmd: bus message command header
230  * @me_addr: address of the client in ME
231  * @host_addr: address of the client in the driver
232  * @data: generic data
233  */
234 struct mei_hbm_cl_cmd {
235 	u8 hbm_cmd;
236 	u8 me_addr;
237 	u8 host_addr;
238 	u8 data;
239 };
240 
241 struct hbm_version {
242 	u8 minor_version;
243 	u8 major_version;
244 } __packed;
245 
246 struct hbm_host_version_request {
247 	u8 hbm_cmd;
248 	u8 reserved;
249 	struct hbm_version host_version;
250 } __packed;
251 
252 struct hbm_host_version_response {
253 	u8 hbm_cmd;
254 	u8 host_version_supported;
255 	struct hbm_version me_max_version;
256 } __packed;
257 
258 struct hbm_host_stop_request {
259 	u8 hbm_cmd;
260 	u8 reason;
261 	u8 reserved[2];
262 } __packed;
263 
264 struct hbm_host_stop_response {
265 	u8 hbm_cmd;
266 	u8 reserved[3];
267 } __packed;
268 
269 struct hbm_me_stop_request {
270 	u8 hbm_cmd;
271 	u8 reason;
272 	u8 reserved[2];
273 } __packed;
274 
275 /**
276  * enum hbm_host_enum_flags - enumeration request flags (HBM version >= 2.0)
277  *
278  * @MEI_HBM_ENUM_F_ALLOW_ADD: allow dynamic clients add
279  * @MEI_HBM_ENUM_F_IMMEDIATE_ENUM: allow FW to send answer immediately
280  */
281 enum hbm_host_enum_flags {
282 	MEI_HBM_ENUM_F_ALLOW_ADD = BIT(0),
283 	MEI_HBM_ENUM_F_IMMEDIATE_ENUM = BIT(1),
284 };
285 
286 /**
287  * struct hbm_host_enum_request - enumeration request from host to fw
288  *
289  * @hbm_cmd : bus message command header
290  * @flags   : request flags
291  * @reserved: reserved
292  */
293 struct hbm_host_enum_request {
294 	u8 hbm_cmd;
295 	u8 flags;
296 	u8 reserved[2];
297 } __packed;
298 
299 struct hbm_host_enum_response {
300 	u8 hbm_cmd;
301 	u8 reserved[3];
302 	u8 valid_addresses[32];
303 } __packed;
304 
305 struct mei_client_properties {
306 	uuid_le protocol_name;
307 	u8 protocol_version;
308 	u8 max_number_of_connections;
309 	u8 fixed_address;
310 	u8 single_recv_buf;
311 	u32 max_msg_length;
312 } __packed;
313 
314 struct hbm_props_request {
315 	u8 hbm_cmd;
316 	u8 me_addr;
317 	u8 reserved[2];
318 } __packed;
319 
320 struct hbm_props_response {
321 	u8 hbm_cmd;
322 	u8 me_addr;
323 	u8 status;
324 	u8 reserved[1];
325 	struct mei_client_properties client_properties;
326 } __packed;
327 
328 /**
329  * struct hbm_add_client_request - request to add a client
330  *     might be sent by fw after enumeration has already completed
331  *
332  * @hbm_cmd: bus message command header
333  * @me_addr: address of the client in ME
334  * @reserved: reserved
335  * @client_properties: client properties
336  */
337 struct hbm_add_client_request {
338 	u8 hbm_cmd;
339 	u8 me_addr;
340 	u8 reserved[2];
341 	struct mei_client_properties client_properties;
342 } __packed;
343 
344 /**
345  * struct hbm_add_client_response - response to add a client
346  *     sent by the host to report client addition status to fw
347  *
348  * @hbm_cmd: bus message command header
349  * @me_addr: address of the client in ME
350  * @status: if HBMS_SUCCESS then the client can now accept connections.
351  * @reserved: reserved
352  */
353 struct hbm_add_client_response {
354 	u8 hbm_cmd;
355 	u8 me_addr;
356 	u8 status;
357 	u8 reserved[1];
358 } __packed;
359 
360 /**
361  * struct hbm_power_gate - power gate request/response
362  *
363  * @hbm_cmd: bus message command header
364  * @reserved: reserved
365  */
366 struct hbm_power_gate {
367 	u8 hbm_cmd;
368 	u8 reserved[3];
369 } __packed;
370 
371 /**
372  * struct hbm_client_connect_request - connect/disconnect request
373  *
374  * @hbm_cmd: bus message command header
375  * @me_addr: address of the client in ME
376  * @host_addr: address of the client in the driver
377  * @reserved: reserved
378  */
379 struct hbm_client_connect_request {
380 	u8 hbm_cmd;
381 	u8 me_addr;
382 	u8 host_addr;
383 	u8 reserved;
384 } __packed;
385 
386 /**
387  * struct hbm_client_connect_response - connect/disconnect response
388  *
389  * @hbm_cmd: bus message command header
390  * @me_addr: address of the client in ME
391  * @host_addr: address of the client in the driver
392  * @status: status of the request
393  */
394 struct hbm_client_connect_response {
395 	u8 hbm_cmd;
396 	u8 me_addr;
397 	u8 host_addr;
398 	u8 status;
399 } __packed;
400 
401 
402 #define MEI_FC_MESSAGE_RESERVED_LENGTH           5
403 
404 struct hbm_flow_control {
405 	u8 hbm_cmd;
406 	u8 me_addr;
407 	u8 host_addr;
408 	u8 reserved[MEI_FC_MESSAGE_RESERVED_LENGTH];
409 } __packed;
410 
411 #define MEI_HBM_NOTIFICATION_START 1
412 #define MEI_HBM_NOTIFICATION_STOP  0
413 /**
414  * struct hbm_notification_request - start/stop notification request
415  *
416  * @hbm_cmd: bus message command header
417  * @me_addr: address of the client in ME
418  * @host_addr: address of the client in the driver
419  * @start:  start = 1 or stop = 0 asynchronous notifications
420  */
421 struct hbm_notification_request {
422 	u8 hbm_cmd;
423 	u8 me_addr;
424 	u8 host_addr;
425 	u8 start;
426 } __packed;
427 
428 /**
429  * struct hbm_notification_response - start/stop notification response
430  *
431  * @hbm_cmd: bus message command header
432  * @me_addr: address of the client in ME
433  * @host_addr: - address of the client in the driver
434  * @status: (mei_hbm_status) response status for the request
435  *  - MEI_HBMS_SUCCESS: successful stop/start
436  *  - MEI_HBMS_CLIENT_NOT_FOUND: if the connection could not be found.
437  *  - MEI_HBMS_ALREADY_STARTED: for start requests for a previously
438  *                         started notification.
439  *  - MEI_HBMS_NOT_STARTED: for stop request for a connected client for whom
440  *                         asynchronous notifications are currently disabled.
441  *
442  * @start:  start = 1 or stop = 0 asynchronous notifications
443  * @reserved: reserved
444  */
445 struct hbm_notification_response {
446 	u8 hbm_cmd;
447 	u8 me_addr;
448 	u8 host_addr;
449 	u8 status;
450 	u8 start;
451 	u8 reserved[3];
452 } __packed;
453 
454 /**
455  * struct hbm_notification - notification event
456  *
457  * @hbm_cmd: bus message command header
458  * @me_addr:  address of the client in ME
459  * @host_addr:  address of the client in the driver
460  * @reserved: reserved for alignment
461  */
462 struct hbm_notification {
463 	u8 hbm_cmd;
464 	u8 me_addr;
465 	u8 host_addr;
466 	u8 reserved[1];
467 } __packed;
468 
469 /**
470  * struct hbm_dma_mem_dscr - dma ring
471  *
472  * @addr_hi: the high 32bits of 64 bit address
473  * @addr_lo: the low  32bits of 64 bit address
474  * @size   : size in bytes (must be power of 2)
475  */
476 struct hbm_dma_mem_dscr {
477 	u32 addr_hi;
478 	u32 addr_lo;
479 	u32 size;
480 } __packed;
481 
482 enum {
483 	DMA_DSCR_HOST = 0,
484 	DMA_DSCR_DEVICE = 1,
485 	DMA_DSCR_CTRL = 2,
486 	DMA_DSCR_NUM,
487 };
488 
489 /**
490  * struct hbm_dma_setup_request - dma setup request
491  *
492  * @hbm_cmd: bus message command header
493  * @reserved: reserved for alignment
494  * @dma_dscr: dma descriptor for HOST, DEVICE, and CTRL
495  */
496 struct hbm_dma_setup_request {
497 	u8 hbm_cmd;
498 	u8 reserved[3];
499 	struct hbm_dma_mem_dscr dma_dscr[DMA_DSCR_NUM];
500 } __packed;
501 
502 /**
503  * struct hbm_dma_setup_response - dma setup response
504  *
505  * @hbm_cmd: bus message command header
506  * @status: 0 on success; otherwise DMA setup failed.
507  * @reserved: reserved for alignment
508  */
509 struct hbm_dma_setup_response {
510 	u8 hbm_cmd;
511 	u8 status;
512 	u8 reserved[2];
513 } __packed;
514 
515 #endif
516