1 /* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */ 2 /****************************************************************************** 3 * 4 * Name: actypes.h - Common data types for the entire ACPI subsystem 5 * 6 * Copyright (C) 2000 - 2018, Intel Corp. 7 * 8 *****************************************************************************/ 9 10 #ifndef __ACTYPES_H__ 11 #define __ACTYPES_H__ 12 13 /* acpisrc:struct_defs -- for acpisrc conversion */ 14 15 /* 16 * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent 17 * header and must be either 32 or 64. 16-bit ACPICA is no longer 18 * supported, as of 12/2006. 19 */ 20 #ifndef ACPI_MACHINE_WIDTH 21 #error ACPI_MACHINE_WIDTH not defined 22 #endif 23 24 /* 25 * Data type ranges 26 * Note: These macros are designed to be compiler independent as well as 27 * working around problems that some 32-bit compilers have with 64-bit 28 * constants. 29 */ 30 #define ACPI_UINT8_MAX (u8) (~((u8) 0)) /* 0xFF */ 31 #define ACPI_UINT16_MAX (u16)(~((u16) 0)) /* 0xFFFF */ 32 #define ACPI_UINT32_MAX (u32)(~((u32) 0)) /* 0xFFFFFFFF */ 33 #define ACPI_UINT64_MAX (u64)(~((u64) 0)) /* 0xFFFFFFFFFFFFFFFF */ 34 #define ACPI_ASCII_MAX 0x7F 35 36 /* 37 * Architecture-specific ACPICA Subsystem Data Types 38 * 39 * The goal of these types is to provide source code portability across 40 * 16-bit, 32-bit, and 64-bit targets. 41 * 42 * 1) The following types are of fixed size for all targets (16/32/64): 43 * 44 * u8 Logical boolean 45 * 46 * u8 8-bit (1 byte) unsigned value 47 * u16 16-bit (2 byte) unsigned value 48 * u32 32-bit (4 byte) unsigned value 49 * u64 64-bit (8 byte) unsigned value 50 * 51 * s16 16-bit (2 byte) signed value 52 * s32 32-bit (4 byte) signed value 53 * s64 64-bit (8 byte) signed value 54 * 55 * COMPILER_DEPENDENT_UINT64/s64 - These types are defined in the 56 * compiler-dependent header(s) and were introduced because there is no 57 * common 64-bit integer type across the various compilation models, as 58 * shown in the table below. 59 * 60 * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit 61 * char 8 8 8 8 8 8 62 * short 16 16 16 16 16 16 63 * _int32 32 64 * int 32 64 32 32 16 16 65 * long 64 64 32 32 32 32 66 * long long 64 64 67 * pointer 64 64 64 32 32 32 68 * 69 * Note: ILP64 and LP32 are currently not supported. 70 * 71 * 72 * 2) These types represent the native word size of the target mode of the 73 * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are 74 * usually used for memory allocation, efficient loop counters, and array 75 * indexes. The types are similar to the size_t type in the C library and 76 * are required because there is no C type that consistently represents the 77 * native data width. acpi_size is needed because there is no guarantee 78 * that a kernel-level C library is present. 79 * 80 * acpi_size 16/32/64-bit unsigned value 81 * acpi_native_int 16/32/64-bit signed value 82 */ 83 84 /******************************************************************************* 85 * 86 * Common types for all compilers, all targets 87 * 88 ******************************************************************************/ 89 90 #ifndef ACPI_USE_SYSTEM_INTTYPES 91 92 typedef unsigned char u8; 93 typedef unsigned short u16; 94 typedef short s16; 95 typedef COMPILER_DEPENDENT_UINT64 u64; 96 typedef COMPILER_DEPENDENT_INT64 s64; 97 98 #endif /* ACPI_USE_SYSTEM_INTTYPES */ 99 100 /* 101 * Value returned by acpi_os_get_thread_id. There is no standard "thread_id" 102 * across operating systems or even the various UNIX systems. Since ACPICA 103 * only needs the thread ID as a unique thread identifier, we use a u64 104 * as the only common data type - it will accommodate any type of pointer or 105 * any type of integer. It is up to the host-dependent OSL to cast the 106 * native thread ID type to a u64 (in acpi_os_get_thread_id). 107 */ 108 #define acpi_thread_id u64 109 110 /******************************************************************************* 111 * 112 * Types specific to 64-bit targets 113 * 114 ******************************************************************************/ 115 116 #if ACPI_MACHINE_WIDTH == 64 117 118 #ifndef ACPI_USE_SYSTEM_INTTYPES 119 120 typedef unsigned int u32; 121 typedef int s32; 122 123 #endif /* ACPI_USE_SYSTEM_INTTYPES */ 124 125 typedef s64 acpi_native_int; 126 127 typedef u64 acpi_size; 128 typedef u64 acpi_io_address; 129 typedef u64 acpi_physical_address; 130 131 #define ACPI_MAX_PTR ACPI_UINT64_MAX 132 #define ACPI_SIZE_MAX ACPI_UINT64_MAX 133 134 #define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */ 135 #define ACPI_USE_NATIVE_MATH64 /* Has native 64-bit integer support */ 136 137 /* 138 * In the case of the Itanium Processor Family (IPF), the hardware does not 139 * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED 140 * flag to indicate that special precautions must be taken to avoid alignment 141 * faults. (IA64 or ia64 is currently used by existing compilers to indicate 142 * IPF.) 143 * 144 * Note: EM64T and other X86-64 processors support misaligned transfers, 145 * so there is no need to define this flag. 146 */ 147 #if defined (__IA64__) || defined (__ia64__) 148 #define ACPI_MISALIGNMENT_NOT_SUPPORTED 149 #endif 150 151 /******************************************************************************* 152 * 153 * Types specific to 32-bit targets 154 * 155 ******************************************************************************/ 156 157 #elif ACPI_MACHINE_WIDTH == 32 158 159 #ifndef ACPI_USE_SYSTEM_INTTYPES 160 161 typedef unsigned int u32; 162 typedef int s32; 163 164 #endif /* ACPI_USE_SYSTEM_INTTYPES */ 165 166 typedef s32 acpi_native_int; 167 168 typedef u32 acpi_size; 169 170 #ifdef ACPI_32BIT_PHYSICAL_ADDRESS 171 172 /* 173 * OSPMs can define this to shrink the size of the structures for 32-bit 174 * none PAE environment. ASL compiler may always define this to generate 175 * 32-bit OSPM compliant tables. 176 */ 177 typedef u32 acpi_io_address; 178 typedef u32 acpi_physical_address; 179 180 #else /* ACPI_32BIT_PHYSICAL_ADDRESS */ 181 182 /* 183 * It is reported that, after some calculations, the physical addresses can 184 * wrap over the 32-bit boundary on 32-bit PAE environment. 185 * https://bugzilla.kernel.org/show_bug.cgi?id=87971 186 */ 187 typedef u64 acpi_io_address; 188 typedef u64 acpi_physical_address; 189 190 #endif /* ACPI_32BIT_PHYSICAL_ADDRESS */ 191 192 #define ACPI_MAX_PTR ACPI_UINT32_MAX 193 #define ACPI_SIZE_MAX ACPI_UINT32_MAX 194 195 #else 196 197 /* ACPI_MACHINE_WIDTH must be either 64 or 32 */ 198 199 #error unknown ACPI_MACHINE_WIDTH 200 #endif 201 202 /******************************************************************************* 203 * 204 * OS-dependent types 205 * 206 * If the defaults below are not appropriate for the host system, they can 207 * be defined in the OS-specific header, and this will take precedence. 208 * 209 ******************************************************************************/ 210 211 /* Flags for acpi_os_acquire_lock/acpi_os_release_lock */ 212 213 #ifndef acpi_cpu_flags 214 #define acpi_cpu_flags acpi_size 215 #endif 216 217 /* Object returned from acpi_os_create_cache */ 218 219 #ifndef acpi_cache_t 220 #ifdef ACPI_USE_LOCAL_CACHE 221 #define acpi_cache_t struct acpi_memory_list 222 #else 223 #define acpi_cache_t void * 224 #endif 225 #endif 226 227 /* 228 * Synchronization objects - Mutexes, Semaphores, and spin_locks 229 */ 230 #if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE) 231 /* 232 * These macros are used if the host OS does not support a mutex object. 233 * Map the OSL Mutex interfaces to binary semaphores. 234 */ 235 #define acpi_mutex acpi_semaphore 236 #define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle) 237 #define acpi_os_delete_mutex(handle) (void) acpi_os_delete_semaphore (handle) 238 #define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time) 239 #define acpi_os_release_mutex(handle) (void) acpi_os_signal_semaphore (handle, 1) 240 #endif 241 242 /* Configurable types for synchronization objects */ 243 244 #ifndef acpi_spinlock 245 #define acpi_spinlock void * 246 #endif 247 248 #ifndef acpi_raw_spinlock 249 #define acpi_raw_spinlock acpi_spinlock 250 #endif 251 252 #ifndef acpi_semaphore 253 #define acpi_semaphore void * 254 #endif 255 256 #ifndef acpi_mutex 257 #define acpi_mutex void * 258 #endif 259 260 /******************************************************************************* 261 * 262 * Compiler-dependent types 263 * 264 * If the defaults below are not appropriate for the host compiler, they can 265 * be defined in the compiler-specific header, and this will take precedence. 266 * 267 ******************************************************************************/ 268 269 /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */ 270 271 #ifndef acpi_uintptr_t 272 #define acpi_uintptr_t void * 273 #endif 274 275 /* 276 * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because 277 * some compilers can catch printf format string problems 278 */ 279 #ifndef ACPI_PRINTF_LIKE 280 #define ACPI_PRINTF_LIKE(c) 281 #endif 282 283 /* 284 * Some compilers complain about unused variables. Sometimes we don't want 285 * to use all the variables (for example, _acpi_module_name). This allows us 286 * to tell the compiler in a per-variable manner that a variable 287 * is unused 288 */ 289 #ifndef ACPI_UNUSED_VAR 290 #define ACPI_UNUSED_VAR 291 #endif 292 293 /* 294 * All ACPICA external functions that are available to the rest of the 295 * kernel are tagged with these macros which can be defined as appropriate 296 * for the host. 297 * 298 * Notes: 299 * ACPI_EXPORT_SYMBOL_INIT is used for initialization and termination 300 * interfaces that may need special processing. 301 * ACPI_EXPORT_SYMBOL is used for all other public external functions. 302 */ 303 #ifndef ACPI_EXPORT_SYMBOL_INIT 304 #define ACPI_EXPORT_SYMBOL_INIT(symbol) 305 #endif 306 307 #ifndef ACPI_EXPORT_SYMBOL 308 #define ACPI_EXPORT_SYMBOL(symbol) 309 #endif 310 311 /* 312 * Compiler/Clibrary-dependent debug initialization. Used for ACPICA 313 * utilities only. 314 */ 315 #ifndef ACPI_DEBUG_INITIALIZE 316 #define ACPI_DEBUG_INITIALIZE() 317 #endif 318 319 /******************************************************************************* 320 * 321 * Configuration 322 * 323 ******************************************************************************/ 324 325 #ifdef ACPI_NO_MEM_ALLOCATIONS 326 327 #define ACPI_ALLOCATE(a) NULL 328 #define ACPI_ALLOCATE_ZEROED(a) NULL 329 #define ACPI_FREE(a) 330 #define ACPI_MEM_TRACKING(a) 331 332 #else /* ACPI_NO_MEM_ALLOCATIONS */ 333 334 #ifdef ACPI_DBG_TRACK_ALLOCATIONS 335 /* 336 * Memory allocation tracking (used by acpi_exec to detect memory leaks) 337 */ 338 #define ACPI_MEM_PARAMETERS _COMPONENT, _acpi_module_name, __LINE__ 339 #define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS) 340 #define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS) 341 #define ACPI_FREE(a) acpi_ut_free_and_track (a, ACPI_MEM_PARAMETERS) 342 #define ACPI_MEM_TRACKING(a) a 343 344 #else 345 /* 346 * Normal memory allocation directly via the OS services layer 347 */ 348 #define ACPI_ALLOCATE(a) acpi_os_allocate ((acpi_size) (a)) 349 #define ACPI_ALLOCATE_ZEROED(a) acpi_os_allocate_zeroed ((acpi_size) (a)) 350 #define ACPI_FREE(a) acpi_os_free (a) 351 #define ACPI_MEM_TRACKING(a) 352 353 #endif /* ACPI_DBG_TRACK_ALLOCATIONS */ 354 355 #endif /* ACPI_NO_MEM_ALLOCATIONS */ 356 357 /****************************************************************************** 358 * 359 * ACPI Specification constants (Do not change unless the specification 360 * changes) 361 * 362 *****************************************************************************/ 363 364 /* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */ 365 366 #define ACPI_MAX_GPE_BLOCKS 2 367 368 /* Default ACPI register widths */ 369 370 #define ACPI_GPE_REGISTER_WIDTH 8 371 #define ACPI_PM1_REGISTER_WIDTH 16 372 #define ACPI_PM2_REGISTER_WIDTH 8 373 #define ACPI_PM_TIMER_WIDTH 32 374 #define ACPI_RESET_REGISTER_WIDTH 8 375 376 /* Names within the namespace are 4 bytes long */ 377 378 #define ACPI_NAME_SIZE 4 379 #define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ 380 #define ACPI_PATH_SEPARATOR '.' 381 382 /* Sizes for ACPI table headers */ 383 384 #define ACPI_OEM_ID_SIZE 6 385 #define ACPI_OEM_TABLE_ID_SIZE 8 386 387 /* ACPI/PNP hardware IDs */ 388 389 #define PCI_ROOT_HID_STRING "PNP0A03" 390 #define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08" 391 392 /* PM Timer ticks per second (HZ) */ 393 394 #define ACPI_PM_TIMER_FREQUENCY 3579545 395 396 /******************************************************************************* 397 * 398 * Independent types 399 * 400 ******************************************************************************/ 401 402 /* Logical defines and NULL */ 403 404 #ifdef FALSE 405 #undef FALSE 406 #endif 407 #define FALSE (1 == 0) 408 409 #ifdef TRUE 410 #undef TRUE 411 #endif 412 #define TRUE (1 == 1) 413 414 #ifndef NULL 415 #define NULL (void *) 0 416 #endif 417 418 /* 419 * Miscellaneous types 420 */ 421 typedef u32 acpi_status; /* All ACPI Exceptions */ 422 typedef u32 acpi_name; /* 4-byte ACPI name */ 423 typedef char *acpi_string; /* Null terminated ASCII string */ 424 typedef void *acpi_handle; /* Actually a ptr to a NS Node */ 425 426 /* Time constants for timer calculations */ 427 428 #define ACPI_MSEC_PER_SEC 1000L 429 430 #define ACPI_USEC_PER_MSEC 1000L 431 #define ACPI_USEC_PER_SEC 1000000L 432 433 #define ACPI_100NSEC_PER_USEC 10L 434 #define ACPI_100NSEC_PER_MSEC 10000L 435 #define ACPI_100NSEC_PER_SEC 10000000L 436 437 #define ACPI_NSEC_PER_USEC 1000L 438 #define ACPI_NSEC_PER_MSEC 1000000L 439 #define ACPI_NSEC_PER_SEC 1000000000L 440 441 #define ACPI_TIME_AFTER(a, b) ((s64)((b) - (a)) < 0) 442 443 /* Owner IDs are used to track namespace nodes for selective deletion */ 444 445 typedef u8 acpi_owner_id; 446 #define ACPI_OWNER_ID_MAX 0xFF 447 448 #define ACPI_INTEGER_BIT_SIZE 64 449 #define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */ 450 #define ACPI_MAX64_DECIMAL_DIGITS 20 451 #define ACPI_MAX32_DECIMAL_DIGITS 10 452 #define ACPI_MAX16_DECIMAL_DIGITS 5 453 #define ACPI_MAX8_DECIMAL_DIGITS 3 454 455 /* 456 * Constants with special meanings 457 */ 458 #define ACPI_ROOT_OBJECT ((acpi_handle) ACPI_TO_POINTER (ACPI_MAX_PTR)) 459 #define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */ 460 #define ACPI_DO_NOT_WAIT 0 461 462 /* 463 * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 464 * 32 bits. In ACPI version 2 (2000) and later, integers are max 64 bits. 465 * Note that this pertains to the ACPI integer type only, not to other 466 * integers used in the implementation of the ACPICA subsystem. 467 * 468 * 01/2010: This type is obsolete and has been removed from the entire ACPICA 469 * code base. It remains here for compatibility with device drivers that use 470 * the type. However, it will be removed in the future. 471 */ 472 typedef u64 acpi_integer; 473 #define ACPI_INTEGER_MAX ACPI_UINT64_MAX 474 475 /******************************************************************************* 476 * 477 * Commonly used macros 478 * 479 ******************************************************************************/ 480 481 /* Data manipulation */ 482 483 #define ACPI_LOBYTE(integer) ((u8) (u16)(integer)) 484 #define ACPI_HIBYTE(integer) ((u8) (((u16)(integer)) >> 8)) 485 #define ACPI_LOWORD(integer) ((u16) (u32)(integer)) 486 #define ACPI_HIWORD(integer) ((u16)(((u32)(integer)) >> 16)) 487 #define ACPI_LODWORD(integer64) ((u32) (u64)(integer64)) 488 #define ACPI_HIDWORD(integer64) ((u32)(((u64)(integer64)) >> 32)) 489 490 #define ACPI_SET_BIT(target,bit) ((target) |= (bit)) 491 #define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) 492 #define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) 493 #define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) 494 495 /* Size calculation */ 496 497 #define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) 498 499 /* Pointer manipulation */ 500 501 #define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p)) 502 #define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p)) 503 #define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b))) 504 #define ACPI_SUB_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) - (acpi_size)(b))) 505 #define ACPI_PTR_DIFF(a, b) ((acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b)))) 506 507 /* Pointer/Integer type conversions */ 508 509 #define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) 0, (acpi_size) (i)) 510 #define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) 0) 511 #define ACPI_OFFSET(d, f) ACPI_PTR_DIFF (&(((d *) 0)->f), (void *) 0) 512 #define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) 513 #define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) 514 515 /* Optimizations for 4-character (32-bit) acpi_name manipulation */ 516 517 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED 518 #define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b))) 519 #define ACPI_MOVE_NAME(dest,src) (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src))) 520 #else 521 #define ACPI_COMPARE_NAME(a,b) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE)) 522 #define ACPI_MOVE_NAME(dest,src) (strncpy (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAME_SIZE)) 523 #endif 524 525 /* Support for the special RSDP signature (8 characters) */ 526 527 #define ACPI_VALIDATE_RSDP_SIG(a) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_SIG_RSDP, 8)) 528 #define ACPI_MAKE_RSDP_SIG(dest) (memcpy (ACPI_CAST_PTR (char, (dest)), ACPI_SIG_RSDP, 8)) 529 530 /* 531 * Algorithm to obtain access bit or byte width. 532 * Can be used with access_width of struct acpi_generic_address and access_size of 533 * struct acpi_resource_generic_register. 534 */ 535 #define ACPI_ACCESS_BIT_SHIFT 2 536 #define ACPI_ACCESS_BYTE_SHIFT -1 537 #define ACPI_ACCESS_BIT_MAX (31 - ACPI_ACCESS_BIT_SHIFT) 538 #define ACPI_ACCESS_BYTE_MAX (31 - ACPI_ACCESS_BYTE_SHIFT) 539 #define ACPI_ACCESS_BIT_DEFAULT (8 - ACPI_ACCESS_BIT_SHIFT) 540 #define ACPI_ACCESS_BYTE_DEFAULT (8 - ACPI_ACCESS_BYTE_SHIFT) 541 #define ACPI_ACCESS_BIT_WIDTH(size) (1 << ((size) + ACPI_ACCESS_BIT_SHIFT)) 542 #define ACPI_ACCESS_BYTE_WIDTH(size) (1 << ((size) + ACPI_ACCESS_BYTE_SHIFT)) 543 544 /******************************************************************************* 545 * 546 * Miscellaneous constants 547 * 548 ******************************************************************************/ 549 550 /* 551 * Initialization sequence options 552 */ 553 #define ACPI_FULL_INITIALIZATION 0x0000 554 #define ACPI_NO_FACS_INIT 0x0001 555 #define ACPI_NO_ACPI_ENABLE 0x0002 556 #define ACPI_NO_HARDWARE_INIT 0x0004 557 #define ACPI_NO_EVENT_INIT 0x0008 558 #define ACPI_NO_HANDLER_INIT 0x0010 559 #define ACPI_NO_OBJECT_INIT 0x0020 560 #define ACPI_NO_DEVICE_INIT 0x0040 561 #define ACPI_NO_ADDRESS_SPACE_INIT 0x0080 562 563 /* 564 * Initialization state 565 */ 566 #define ACPI_SUBSYSTEM_INITIALIZE 0x01 567 #define ACPI_INITIALIZED_OK 0x02 568 569 /* 570 * Power state values 571 */ 572 #define ACPI_STATE_UNKNOWN (u8) 0xFF 573 574 #define ACPI_STATE_S0 (u8) 0 575 #define ACPI_STATE_S1 (u8) 1 576 #define ACPI_STATE_S2 (u8) 2 577 #define ACPI_STATE_S3 (u8) 3 578 #define ACPI_STATE_S4 (u8) 4 579 #define ACPI_STATE_S5 (u8) 5 580 #define ACPI_S_STATES_MAX ACPI_STATE_S5 581 #define ACPI_S_STATE_COUNT 6 582 583 #define ACPI_STATE_D0 (u8) 0 584 #define ACPI_STATE_D1 (u8) 1 585 #define ACPI_STATE_D2 (u8) 2 586 #define ACPI_STATE_D3_HOT (u8) 3 587 #define ACPI_STATE_D3 (u8) 4 588 #define ACPI_STATE_D3_COLD ACPI_STATE_D3 589 #define ACPI_D_STATES_MAX ACPI_STATE_D3 590 #define ACPI_D_STATE_COUNT 5 591 592 #define ACPI_STATE_C0 (u8) 0 593 #define ACPI_STATE_C1 (u8) 1 594 #define ACPI_STATE_C2 (u8) 2 595 #define ACPI_STATE_C3 (u8) 3 596 #define ACPI_C_STATES_MAX ACPI_STATE_C3 597 #define ACPI_C_STATE_COUNT 4 598 599 /* 600 * Sleep type invalid value 601 */ 602 #define ACPI_SLEEP_TYPE_MAX 0x7 603 #define ACPI_SLEEP_TYPE_INVALID 0xFF 604 605 /* 606 * Standard notify values 607 */ 608 #define ACPI_NOTIFY_BUS_CHECK (u8) 0x00 609 #define ACPI_NOTIFY_DEVICE_CHECK (u8) 0x01 610 #define ACPI_NOTIFY_DEVICE_WAKE (u8) 0x02 611 #define ACPI_NOTIFY_EJECT_REQUEST (u8) 0x03 612 #define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (u8) 0x04 613 #define ACPI_NOTIFY_FREQUENCY_MISMATCH (u8) 0x05 614 #define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 0x06 615 #define ACPI_NOTIFY_POWER_FAULT (u8) 0x07 616 #define ACPI_NOTIFY_CAPABILITIES_CHECK (u8) 0x08 617 #define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09 618 #define ACPI_NOTIFY_RESERVED (u8) 0x0A 619 #define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B 620 #define ACPI_NOTIFY_SHUTDOWN_REQUEST (u8) 0x0C 621 #define ACPI_NOTIFY_AFFINITY_UPDATE (u8) 0x0D 622 #define ACPI_NOTIFY_MEMORY_UPDATE (u8) 0x0E 623 624 #define ACPI_GENERIC_NOTIFY_MAX 0x0E 625 #define ACPI_SPECIFIC_NOTIFY_MAX 0x84 626 627 /* 628 * Types associated with ACPI names and objects. The first group of 629 * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition 630 * of the ACPI object_type() operator (See the ACPI Spec). Therefore, 631 * only add to the first group if the spec changes. 632 * 633 * NOTE: Types must be kept in sync with the global acpi_ns_properties 634 * and acpi_ns_type_names arrays. 635 */ 636 typedef u32 acpi_object_type; 637 638 #define ACPI_TYPE_ANY 0x00 639 #define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */ 640 #define ACPI_TYPE_STRING 0x02 641 #define ACPI_TYPE_BUFFER 0x03 642 #define ACPI_TYPE_PACKAGE 0x04 /* byte_const, multiple data_term/Constant/super_name */ 643 #define ACPI_TYPE_FIELD_UNIT 0x05 644 #define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */ 645 #define ACPI_TYPE_EVENT 0x07 646 #define ACPI_TYPE_METHOD 0x08 /* Name, byte_const, multiple Code */ 647 #define ACPI_TYPE_MUTEX 0x09 648 #define ACPI_TYPE_REGION 0x0A 649 #define ACPI_TYPE_POWER 0x0B /* Name,byte_const,word_const,multi Node */ 650 #define ACPI_TYPE_PROCESSOR 0x0C /* Name,byte_const,Dword_const,byte_const,multi nm_o */ 651 #define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */ 652 #define ACPI_TYPE_BUFFER_FIELD 0x0E 653 #define ACPI_TYPE_DDB_HANDLE 0x0F 654 #define ACPI_TYPE_DEBUG_OBJECT 0x10 655 656 #define ACPI_TYPE_EXTERNAL_MAX 0x10 657 #define ACPI_NUM_TYPES (ACPI_TYPE_EXTERNAL_MAX + 1) 658 659 /* 660 * These are object types that do not map directly to the ACPI 661 * object_type() operator. They are used for various internal purposes 662 * only. If new predefined ACPI_TYPEs are added (via the ACPI 663 * specification), these internal types must move upwards. (There 664 * is code that depends on these values being contiguous with the 665 * external types above.) 666 */ 667 #define ACPI_TYPE_LOCAL_REGION_FIELD 0x11 668 #define ACPI_TYPE_LOCAL_BANK_FIELD 0x12 669 #define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13 670 #define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, ref_of, Index */ 671 #define ACPI_TYPE_LOCAL_ALIAS 0x15 672 #define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16 673 #define ACPI_TYPE_LOCAL_NOTIFY 0x17 674 #define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18 675 #define ACPI_TYPE_LOCAL_RESOURCE 0x19 676 #define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A 677 #define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple object_list Nodes */ 678 679 #define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */ 680 #define ACPI_TOTAL_TYPES (ACPI_TYPE_NS_NODE_MAX + 1) 681 682 /* 683 * These are special object types that never appear in 684 * a Namespace node, only in an object of union acpi_operand_object 685 */ 686 #define ACPI_TYPE_LOCAL_EXTRA 0x1C 687 #define ACPI_TYPE_LOCAL_DATA 0x1D 688 689 #define ACPI_TYPE_LOCAL_MAX 0x1D 690 691 /* All types above here are invalid */ 692 693 #define ACPI_TYPE_INVALID 0x1E 694 #define ACPI_TYPE_NOT_FOUND 0xFF 695 696 #define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1) 697 698 /* 699 * All I/O 700 */ 701 #define ACPI_READ 0 702 #define ACPI_WRITE 1 703 #define ACPI_IO_MASK 1 704 705 /* 706 * Event Types: Fixed & General Purpose 707 */ 708 typedef u32 acpi_event_type; 709 710 /* 711 * Fixed events 712 */ 713 #define ACPI_EVENT_PMTIMER 0 714 #define ACPI_EVENT_GLOBAL 1 715 #define ACPI_EVENT_POWER_BUTTON 2 716 #define ACPI_EVENT_SLEEP_BUTTON 3 717 #define ACPI_EVENT_RTC 4 718 #define ACPI_EVENT_MAX 4 719 #define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1 720 721 /* 722 * Event status - Per event 723 * ------------- 724 * The encoding of acpi_event_status is illustrated below. 725 * Note that a set bit (1) indicates the property is TRUE 726 * (e.g. if bit 0 is set then the event is enabled). 727 * +-------------+-+-+-+-+-+-+ 728 * | Bits 31:6 |5|4|3|2|1|0| 729 * +-------------+-+-+-+-+-+-+ 730 * | | | | | | | 731 * | | | | | | +- Enabled? 732 * | | | | | +--- Enabled for wake? 733 * | | | | +----- Status bit set? 734 * | | | +------- Enable bit set? 735 * | | +--------- Has a handler? 736 * | +----------- Masked? 737 * +----------------- <Reserved> 738 */ 739 typedef u32 acpi_event_status; 740 741 #define ACPI_EVENT_FLAG_DISABLED (acpi_event_status) 0x00 742 #define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01 743 #define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02 744 #define ACPI_EVENT_FLAG_STATUS_SET (acpi_event_status) 0x04 745 #define ACPI_EVENT_FLAG_ENABLE_SET (acpi_event_status) 0x08 746 #define ACPI_EVENT_FLAG_HAS_HANDLER (acpi_event_status) 0x10 747 #define ACPI_EVENT_FLAG_MASKED (acpi_event_status) 0x20 748 #define ACPI_EVENT_FLAG_SET ACPI_EVENT_FLAG_STATUS_SET 749 750 /* Actions for acpi_set_gpe, acpi_gpe_wakeup, acpi_hw_low_set_gpe */ 751 752 #define ACPI_GPE_ENABLE 0 753 #define ACPI_GPE_DISABLE 1 754 #define ACPI_GPE_CONDITIONAL_ENABLE 2 755 756 /* 757 * GPE info flags - Per GPE 758 * +---+-+-+-+---+ 759 * |7:6|5|4|3|2:0| 760 * +---+-+-+-+---+ 761 * | | | | | 762 * | | | | +-- Type of dispatch:to method, handler, notify, or none 763 * | | | +----- Interrupt type: edge or level triggered 764 * | | +------- Is a Wake GPE 765 * | +--------- Has been enabled automatically at init time 766 * +------------ <Reserved> 767 */ 768 #define ACPI_GPE_DISPATCH_NONE (u8) 0x00 769 #define ACPI_GPE_DISPATCH_METHOD (u8) 0x01 770 #define ACPI_GPE_DISPATCH_HANDLER (u8) 0x02 771 #define ACPI_GPE_DISPATCH_NOTIFY (u8) 0x03 772 #define ACPI_GPE_DISPATCH_RAW_HANDLER (u8) 0x04 773 #define ACPI_GPE_DISPATCH_MASK (u8) 0x07 774 #define ACPI_GPE_DISPATCH_TYPE(flags) ((u8) ((flags) & ACPI_GPE_DISPATCH_MASK)) 775 776 #define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x08 777 #define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00 778 #define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x08 779 780 #define ACPI_GPE_CAN_WAKE (u8) 0x10 781 #define ACPI_GPE_AUTO_ENABLED (u8) 0x20 782 #define ACPI_GPE_INITIALIZED (u8) 0x40 783 784 /* 785 * Flags for GPE and Lock interfaces 786 */ 787 #define ACPI_NOT_ISR 0x1 788 #define ACPI_ISR 0x0 789 790 /* Notify types */ 791 792 #define ACPI_SYSTEM_NOTIFY 0x1 793 #define ACPI_DEVICE_NOTIFY 0x2 794 #define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY) 795 #define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3 796 #define ACPI_NUM_NOTIFY_TYPES 2 797 798 #define ACPI_MAX_SYS_NOTIFY 0x7F 799 #define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF 800 801 #define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */ 802 #define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */ 803 804 /* Address Space (Operation Region) Types */ 805 806 typedef u8 acpi_adr_space_type; 807 808 #define ACPI_ADR_SPACE_SYSTEM_MEMORY (acpi_adr_space_type) 0 809 #define ACPI_ADR_SPACE_SYSTEM_IO (acpi_adr_space_type) 1 810 #define ACPI_ADR_SPACE_PCI_CONFIG (acpi_adr_space_type) 2 811 #define ACPI_ADR_SPACE_EC (acpi_adr_space_type) 3 812 #define ACPI_ADR_SPACE_SMBUS (acpi_adr_space_type) 4 813 #define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5 814 #define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6 815 #define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7 816 #define ACPI_ADR_SPACE_GPIO (acpi_adr_space_type) 8 817 #define ACPI_ADR_SPACE_GSBUS (acpi_adr_space_type) 9 818 #define ACPI_ADR_SPACE_PLATFORM_COMM (acpi_adr_space_type) 10 819 820 #define ACPI_NUM_PREDEFINED_REGIONS 11 821 822 /* 823 * Special Address Spaces 824 * 825 * Note: A Data Table region is a special type of operation region 826 * that has its own AML opcode. However, internally, the AML 827 * interpreter simply creates an operation region with an an address 828 * space type of ACPI_ADR_SPACE_DATA_TABLE. 829 */ 830 #define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 0x7E /* Internal to ACPICA only */ 831 #define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 0x7F 832 833 /* Values for _REG connection code */ 834 835 #define ACPI_REG_DISCONNECT 0 836 #define ACPI_REG_CONNECT 1 837 838 /* 839 * bit_register IDs 840 * 841 * These values are intended to be used by the hardware interfaces 842 * and are mapped to individual bitfields defined within the ACPI 843 * registers. See the acpi_gbl_bit_register_info global table in utglobal.c 844 * for this mapping. 845 */ 846 847 /* PM1 Status register */ 848 849 #define ACPI_BITREG_TIMER_STATUS 0x00 850 #define ACPI_BITREG_BUS_MASTER_STATUS 0x01 851 #define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02 852 #define ACPI_BITREG_POWER_BUTTON_STATUS 0x03 853 #define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04 854 #define ACPI_BITREG_RT_CLOCK_STATUS 0x05 855 #define ACPI_BITREG_WAKE_STATUS 0x06 856 #define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07 857 858 /* PM1 Enable register */ 859 860 #define ACPI_BITREG_TIMER_ENABLE 0x08 861 #define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09 862 #define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A 863 #define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B 864 #define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C 865 #define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D 866 867 /* PM1 Control register */ 868 869 #define ACPI_BITREG_SCI_ENABLE 0x0E 870 #define ACPI_BITREG_BUS_MASTER_RLD 0x0F 871 #define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10 872 #define ACPI_BITREG_SLEEP_TYPE 0x11 873 #define ACPI_BITREG_SLEEP_ENABLE 0x12 874 875 /* PM2 Control register */ 876 877 #define ACPI_BITREG_ARB_DISABLE 0x13 878 879 #define ACPI_BITREG_MAX 0x13 880 #define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1 881 882 /* Status register values. A 1 clears a status bit. 0 = no effect */ 883 884 #define ACPI_CLEAR_STATUS 1 885 886 /* Enable and Control register values */ 887 888 #define ACPI_ENABLE_EVENT 1 889 #define ACPI_DISABLE_EVENT 0 890 891 /* Sleep function dispatch */ 892 893 typedef acpi_status (*acpi_sleep_function) (u8 sleep_state); 894 895 struct acpi_sleep_functions { 896 acpi_sleep_function legacy_function; 897 acpi_sleep_function extended_function; 898 }; 899 900 /* 901 * External ACPI object definition 902 */ 903 904 /* 905 * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package 906 * element or an unresolved named reference. 907 */ 908 union acpi_object { 909 acpi_object_type type; /* See definition of acpi_ns_type for values */ 910 struct { 911 acpi_object_type type; /* ACPI_TYPE_INTEGER */ 912 u64 value; /* The actual number */ 913 } integer; 914 915 struct { 916 acpi_object_type type; /* ACPI_TYPE_STRING */ 917 u32 length; /* # of bytes in string, excluding trailing null */ 918 char *pointer; /* points to the string value */ 919 } string; 920 921 struct { 922 acpi_object_type type; /* ACPI_TYPE_BUFFER */ 923 u32 length; /* # of bytes in buffer */ 924 u8 *pointer; /* points to the buffer */ 925 } buffer; 926 927 struct { 928 acpi_object_type type; /* ACPI_TYPE_PACKAGE */ 929 u32 count; /* # of elements in package */ 930 union acpi_object *elements; /* Pointer to an array of ACPI_OBJECTs */ 931 } package; 932 933 struct { 934 acpi_object_type type; /* ACPI_TYPE_LOCAL_REFERENCE */ 935 acpi_object_type actual_type; /* Type associated with the Handle */ 936 acpi_handle handle; /* object reference */ 937 } reference; 938 939 struct { 940 acpi_object_type type; /* ACPI_TYPE_PROCESSOR */ 941 u32 proc_id; 942 acpi_io_address pblk_address; 943 u32 pblk_length; 944 } processor; 945 946 struct { 947 acpi_object_type type; /* ACPI_TYPE_POWER */ 948 u32 system_level; 949 u32 resource_order; 950 } power_resource; 951 }; 952 953 /* 954 * List of objects, used as a parameter list for control method evaluation 955 */ 956 struct acpi_object_list { 957 u32 count; 958 union acpi_object *pointer; 959 }; 960 961 /* 962 * Miscellaneous common Data Structures used by the interfaces 963 */ 964 #define ACPI_NO_BUFFER 0 965 966 #ifdef ACPI_NO_MEM_ALLOCATIONS 967 968 #define ACPI_ALLOCATE_BUFFER (acpi_size) (0) 969 #define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (0) 970 971 #else /* ACPI_NO_MEM_ALLOCATIONS */ 972 973 #define ACPI_ALLOCATE_BUFFER (acpi_size) (-1) /* Let ACPICA allocate buffer */ 974 #define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (-2) /* For internal use only (enables tracking) */ 975 976 #endif /* ACPI_NO_MEM_ALLOCATIONS */ 977 978 struct acpi_buffer { 979 acpi_size length; /* Length in bytes of the buffer */ 980 void *pointer; /* pointer to buffer */ 981 }; 982 983 /* 984 * name_type for acpi_get_name 985 */ 986 #define ACPI_FULL_PATHNAME 0 987 #define ACPI_SINGLE_NAME 1 988 #define ACPI_FULL_PATHNAME_NO_TRAILING 2 989 #define ACPI_NAME_TYPE_MAX 2 990 991 /* 992 * Predefined Namespace items 993 */ 994 struct acpi_predefined_names { 995 const char *name; 996 u8 type; 997 char *val; 998 }; 999 1000 /* 1001 * Structure and flags for acpi_get_system_info 1002 */ 1003 #define ACPI_SYS_MODE_UNKNOWN 0x0000 1004 #define ACPI_SYS_MODE_ACPI 0x0001 1005 #define ACPI_SYS_MODE_LEGACY 0x0002 1006 #define ACPI_SYS_MODES_MASK 0x0003 1007 1008 /* 1009 * System info returned by acpi_get_system_info() 1010 */ 1011 struct acpi_system_info { 1012 u32 acpi_ca_version; 1013 u32 flags; 1014 u32 timer_resolution; 1015 u32 reserved1; 1016 u32 reserved2; 1017 u32 debug_level; 1018 u32 debug_layer; 1019 }; 1020 1021 /* 1022 * System statistics returned by acpi_get_statistics() 1023 */ 1024 struct acpi_statistics { 1025 u32 sci_count; 1026 u32 gpe_count; 1027 u32 fixed_event_count[ACPI_NUM_FIXED_EVENTS]; 1028 u32 method_count; 1029 }; 1030 1031 /* 1032 * Types specific to the OS service interfaces 1033 */ 1034 typedef u32 1035 (ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context); 1036 1037 typedef void 1038 (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context); 1039 1040 /* 1041 * Various handlers and callback procedures 1042 */ 1043 typedef 1044 u32 (*acpi_sci_handler) (void *context); 1045 1046 typedef 1047 void (*acpi_gbl_event_handler) (u32 event_type, 1048 acpi_handle device, 1049 u32 event_number, void *context); 1050 1051 #define ACPI_EVENT_TYPE_GPE 0 1052 #define ACPI_EVENT_TYPE_FIXED 1 1053 1054 typedef 1055 u32(*acpi_event_handler) (void *context); 1056 1057 typedef 1058 u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context); 1059 1060 typedef 1061 void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context); 1062 1063 typedef 1064 void (*acpi_object_handler) (acpi_handle object, void *data); 1065 1066 typedef 1067 acpi_status (*acpi_init_handler) (acpi_handle object, u32 function); 1068 1069 #define ACPI_INIT_DEVICE_INI 1 1070 1071 typedef 1072 acpi_status (*acpi_exception_handler) (acpi_status aml_status, 1073 acpi_name name, 1074 u16 opcode, 1075 u32 aml_offset, void *context); 1076 1077 /* Table Event handler (Load, load_table, etc.) and types */ 1078 1079 typedef 1080 acpi_status (*acpi_table_handler) (u32 event, void *table, void *context); 1081 1082 /* Table Event Types */ 1083 1084 #define ACPI_TABLE_EVENT_LOAD 0x0 1085 #define ACPI_TABLE_EVENT_UNLOAD 0x1 1086 #define ACPI_TABLE_EVENT_INSTALL 0x2 1087 #define ACPI_TABLE_EVENT_UNINSTALL 0x3 1088 #define ACPI_NUM_TABLE_EVENTS 4 1089 1090 /* Address Spaces (For Operation Regions) */ 1091 1092 typedef 1093 acpi_status (*acpi_adr_space_handler) (u32 function, 1094 acpi_physical_address address, 1095 u32 bit_width, 1096 u64 *value, 1097 void *handler_context, 1098 void *region_context); 1099 1100 #define ACPI_DEFAULT_HANDLER NULL 1101 1102 /* Special Context data for generic_serial_bus/general_purpose_io (ACPI 5.0) */ 1103 1104 struct acpi_connection_info { 1105 u8 *connection; 1106 u16 length; 1107 u8 access_length; 1108 }; 1109 1110 typedef 1111 acpi_status (*acpi_adr_space_setup) (acpi_handle region_handle, 1112 u32 function, 1113 void *handler_context, 1114 void **region_context); 1115 1116 #define ACPI_REGION_ACTIVATE 0 1117 #define ACPI_REGION_DEACTIVATE 1 1118 1119 typedef 1120 acpi_status (*acpi_walk_callback) (acpi_handle object, 1121 u32 nesting_level, 1122 void *context, void **return_value); 1123 1124 typedef 1125 u32 (*acpi_interface_handler) (acpi_string interface_name, u32 supported); 1126 1127 /* Interrupt handler return values */ 1128 1129 #define ACPI_INTERRUPT_NOT_HANDLED 0x00 1130 #define ACPI_INTERRUPT_HANDLED 0x01 1131 1132 /* GPE handler return values */ 1133 1134 #define ACPI_REENABLE_GPE 0x80 1135 1136 /* Length of 32-bit EISAID values when converted back to a string */ 1137 1138 #define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */ 1139 1140 /* Length of UUID (string) values */ 1141 1142 #define ACPI_UUID_LENGTH 16 1143 1144 /* Length of 3-byte PCI class code values when converted back to a string */ 1145 1146 #define ACPI_PCICLS_STRING_SIZE 7 /* Includes null terminator */ 1147 1148 /* Structures used for device/processor HID, UID, CID */ 1149 1150 struct acpi_pnp_device_id { 1151 u32 length; /* Length of string + null */ 1152 char *string; 1153 }; 1154 1155 struct acpi_pnp_device_id_list { 1156 u32 count; /* Number of IDs in Ids array */ 1157 u32 list_size; /* Size of list, including ID strings */ 1158 struct acpi_pnp_device_id ids[1]; /* ID array */ 1159 }; 1160 1161 /* 1162 * Structure returned from acpi_get_object_info. 1163 * Optimized for both 32-bit and 64-bit builds. 1164 */ 1165 struct acpi_device_info { 1166 u32 info_size; /* Size of info, including ID strings */ 1167 u32 name; /* ACPI object Name */ 1168 acpi_object_type type; /* ACPI object Type */ 1169 u8 param_count; /* If a method, required parameter count */ 1170 u16 valid; /* Indicates which optional fields are valid */ 1171 u8 flags; /* Miscellaneous info */ 1172 u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */ 1173 u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */ 1174 u64 address; /* _ADR value */ 1175 struct acpi_pnp_device_id hardware_id; /* _HID value */ 1176 struct acpi_pnp_device_id unique_id; /* _UID value */ 1177 struct acpi_pnp_device_id class_code; /* _CLS value */ 1178 struct acpi_pnp_device_id_list compatible_id_list; /* _CID list <must be last> */ 1179 }; 1180 1181 /* Values for Flags field above (acpi_get_object_info) */ 1182 1183 #define ACPI_PCI_ROOT_BRIDGE 0x01 1184 1185 /* Flags for Valid field above (acpi_get_object_info) */ 1186 1187 #define ACPI_VALID_ADR 0x0002 1188 #define ACPI_VALID_HID 0x0004 1189 #define ACPI_VALID_UID 0x0008 1190 #define ACPI_VALID_CID 0x0020 1191 #define ACPI_VALID_CLS 0x0040 1192 #define ACPI_VALID_SXDS 0x0100 1193 #define ACPI_VALID_SXWS 0x0200 1194 1195 /* Flags for _STA method */ 1196 1197 #define ACPI_STA_DEVICE_PRESENT 0x01 1198 #define ACPI_STA_DEVICE_ENABLED 0x02 1199 #define ACPI_STA_DEVICE_UI 0x04 1200 #define ACPI_STA_DEVICE_FUNCTIONING 0x08 1201 #define ACPI_STA_DEVICE_OK 0x08 /* Synonym */ 1202 #define ACPI_STA_BATTERY_PRESENT 0x10 1203 1204 /* Context structs for address space handlers */ 1205 1206 struct acpi_pci_id { 1207 u16 segment; 1208 u16 bus; 1209 u16 device; 1210 u16 function; 1211 }; 1212 1213 struct acpi_mem_space_context { 1214 u32 length; 1215 acpi_physical_address address; 1216 acpi_physical_address mapped_physical_address; 1217 u8 *mapped_logical_address; 1218 acpi_size mapped_length; 1219 }; 1220 1221 /* 1222 * struct acpi_memory_list is used only if the ACPICA local cache is enabled 1223 */ 1224 struct acpi_memory_list { 1225 const char *list_name; 1226 void *list_head; 1227 u16 object_size; 1228 u16 max_depth; 1229 u16 current_depth; 1230 1231 #ifdef ACPI_DBG_TRACK_ALLOCATIONS 1232 1233 /* Statistics for debug memory tracking only */ 1234 1235 u32 total_allocated; 1236 u32 total_freed; 1237 u32 max_occupied; 1238 u32 total_size; 1239 u32 current_total_size; 1240 u32 requests; 1241 u32 hits; 1242 #endif 1243 }; 1244 1245 /* Definitions of trace event types */ 1246 1247 typedef enum { 1248 ACPI_TRACE_AML_METHOD, 1249 ACPI_TRACE_AML_OPCODE, 1250 ACPI_TRACE_AML_REGION 1251 } acpi_trace_event_type; 1252 1253 /* Definitions of _OSI support */ 1254 1255 #define ACPI_VENDOR_STRINGS 0x01 1256 #define ACPI_FEATURE_STRINGS 0x02 1257 #define ACPI_ENABLE_INTERFACES 0x00 1258 #define ACPI_DISABLE_INTERFACES 0x04 1259 1260 #define ACPI_DISABLE_ALL_VENDOR_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS) 1261 #define ACPI_DISABLE_ALL_FEATURE_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_FEATURE_STRINGS) 1262 #define ACPI_DISABLE_ALL_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS) 1263 #define ACPI_ENABLE_ALL_VENDOR_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS) 1264 #define ACPI_ENABLE_ALL_FEATURE_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_FEATURE_STRINGS) 1265 #define ACPI_ENABLE_ALL_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS) 1266 1267 #define ACPI_OSI_WIN_2000 0x01 1268 #define ACPI_OSI_WIN_XP 0x02 1269 #define ACPI_OSI_WIN_XP_SP1 0x03 1270 #define ACPI_OSI_WINSRV_2003 0x04 1271 #define ACPI_OSI_WIN_XP_SP2 0x05 1272 #define ACPI_OSI_WINSRV_2003_SP1 0x06 1273 #define ACPI_OSI_WIN_VISTA 0x07 1274 #define ACPI_OSI_WINSRV_2008 0x08 1275 #define ACPI_OSI_WIN_VISTA_SP1 0x09 1276 #define ACPI_OSI_WIN_VISTA_SP2 0x0A 1277 #define ACPI_OSI_WIN_7 0x0B 1278 #define ACPI_OSI_WIN_8 0x0C 1279 #define ACPI_OSI_WIN_10 0x0D 1280 #define ACPI_OSI_WIN_10_RS1 0x0E 1281 #define ACPI_OSI_WIN_10_RS2 0x0F 1282 #define ACPI_OSI_WIN_10_RS3 0x10 1283 1284 /* Definitions of getopt */ 1285 1286 #define ACPI_OPT_END -1 1287 1288 #endif /* __ACTYPES_H__ */ 1289