1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * HD-audio controller (Azalia) registers and helpers
4  *
5  * For traditional reasons, we still use azx_ prefix here
6  */
7 
8 #ifndef __SOUND_HDA_REGISTER_H
9 #define __SOUND_HDA_REGISTER_H
10 
11 #include <linux/io.h>
12 #include <sound/hdaudio.h>
13 
14 #define AZX_REG_GCAP			0x00
15 #define   AZX_GCAP_64OK		(1 << 0)   /* 64bit address support */
16 #define   AZX_GCAP_NSDO		(3 << 1)   /* # of serial data out signals */
17 #define   AZX_GCAP_BSS		(31 << 3)  /* # of bidirectional streams */
18 #define   AZX_GCAP_ISS		(15 << 8)  /* # of input streams */
19 #define   AZX_GCAP_OSS		(15 << 12) /* # of output streams */
20 #define AZX_REG_VMIN			0x02
21 #define AZX_REG_VMAJ			0x03
22 #define AZX_REG_OUTPAY			0x04
23 #define AZX_REG_INPAY			0x06
24 #define AZX_REG_GCTL			0x08
25 #define   AZX_GCTL_RESET	(1 << 0)   /* controller reset */
26 #define   AZX_GCTL_FCNTRL	(1 << 1)   /* flush control */
27 #define   AZX_GCTL_UNSOL	(1 << 8)   /* accept unsol. response enable */
28 #define AZX_REG_WAKEEN			0x0c
29 #define AZX_REG_STATESTS		0x0e
30 #define AZX_REG_GSTS			0x10
31 #define   AZX_GSTS_FSTS		(1 << 1)   /* flush status */
32 #define AZX_REG_GCAP2			0x12
33 #define AZX_REG_LLCH			0x14
34 #define AZX_REG_OUTSTRMPAY		0x18
35 #define AZX_REG_INSTRMPAY		0x1A
36 #define AZX_REG_INTCTL			0x20
37 #define AZX_REG_INTSTS			0x24
38 #define AZX_REG_WALLCLK			0x30	/* 24Mhz source */
39 #define AZX_REG_OLD_SSYNC		0x34	/* SSYNC for old ICH */
40 #define AZX_REG_SSYNC			0x38
41 #define AZX_REG_CORBLBASE		0x40
42 #define AZX_REG_CORBUBASE		0x44
43 #define AZX_REG_CORBWP			0x48
44 #define AZX_REG_CORBRP			0x4a
45 #define   AZX_CORBRP_RST	(1 << 15)  /* read pointer reset */
46 #define AZX_REG_CORBCTL			0x4c
47 #define   AZX_CORBCTL_RUN	(1 << 1)   /* enable DMA */
48 #define   AZX_CORBCTL_CMEIE	(1 << 0)   /* enable memory error irq */
49 #define AZX_REG_CORBSTS			0x4d
50 #define   AZX_CORBSTS_CMEI	(1 << 0)   /* memory error indication */
51 #define AZX_REG_CORBSIZE		0x4e
52 
53 #define AZX_REG_RIRBLBASE		0x50
54 #define AZX_REG_RIRBUBASE		0x54
55 #define AZX_REG_RIRBWP			0x58
56 #define   AZX_RIRBWP_RST	(1 << 15)  /* write pointer reset */
57 #define AZX_REG_RINTCNT			0x5a
58 #define AZX_REG_RIRBCTL			0x5c
59 #define   AZX_RBCTL_IRQ_EN	(1 << 0)   /* enable IRQ */
60 #define   AZX_RBCTL_DMA_EN	(1 << 1)   /* enable DMA */
61 #define   AZX_RBCTL_OVERRUN_EN	(1 << 2)   /* enable overrun irq */
62 #define AZX_REG_RIRBSTS			0x5d
63 #define   AZX_RBSTS_IRQ		(1 << 0)   /* response irq */
64 #define   AZX_RBSTS_OVERRUN	(1 << 2)   /* overrun irq */
65 #define AZX_REG_RIRBSIZE		0x5e
66 
67 #define AZX_REG_IC			0x60
68 #define AZX_REG_IR			0x64
69 #define AZX_REG_IRS			0x68
70 #define   AZX_IRS_VALID		(1<<1)
71 #define   AZX_IRS_BUSY		(1<<0)
72 
73 #define AZX_REG_DPLBASE			0x70
74 #define AZX_REG_DPUBASE			0x74
75 #define   AZX_DPLBASE_ENABLE	0x1	/* Enable position buffer */
76 
77 /* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
78 enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
79 
80 /* stream register offsets from stream base */
81 #define AZX_REG_SD_CTL			0x00
82 #define AZX_REG_SD_STS			0x03
83 #define AZX_REG_SD_LPIB			0x04
84 #define AZX_REG_SD_CBL			0x08
85 #define AZX_REG_SD_LVI			0x0c
86 #define AZX_REG_SD_FIFOW		0x0e
87 #define AZX_REG_SD_FIFOSIZE		0x10
88 #define AZX_REG_SD_FORMAT		0x12
89 #define AZX_REG_SD_FIFOL		0x14
90 #define AZX_REG_SD_BDLPL		0x18
91 #define AZX_REG_SD_BDLPU		0x1c
92 
93 /* GTS registers */
94 #define AZX_REG_LLCH			0x14
95 
96 #define AZX_REG_GTS_BASE		0x520
97 
98 #define AZX_REG_GTSCC	(AZX_REG_GTS_BASE + 0x00)
99 #define AZX_REG_WALFCC	(AZX_REG_GTS_BASE + 0x04)
100 #define AZX_REG_TSCCL	(AZX_REG_GTS_BASE + 0x08)
101 #define AZX_REG_TSCCU	(AZX_REG_GTS_BASE + 0x0C)
102 #define AZX_REG_LLPFOC	(AZX_REG_GTS_BASE + 0x14)
103 #define AZX_REG_LLPCL	(AZX_REG_GTS_BASE + 0x18)
104 #define AZX_REG_LLPCU	(AZX_REG_GTS_BASE + 0x1C)
105 
106 /* Haswell/Broadwell display HD-A controller Extended Mode registers */
107 #define AZX_REG_HSW_EM4			0x100c
108 #define AZX_REG_HSW_EM5			0x1010
109 
110 /* Skylake/Broxton vendor-specific registers */
111 #define AZX_REG_VS_EM1			0x1000
112 #define AZX_REG_VS_INRC			0x1004
113 #define AZX_REG_VS_OUTRC		0x1008
114 #define AZX_REG_VS_FIFOTRK		0x100C
115 #define AZX_REG_VS_FIFOTRK2		0x1010
116 #define AZX_REG_VS_EM2			0x1030
117 #define AZX_REG_VS_EM3L			0x1038
118 #define AZX_REG_VS_EM3U			0x103C
119 #define AZX_REG_VS_EM4L			0x1040
120 #define AZX_REG_VS_EM4U			0x1044
121 #define AZX_REG_VS_LTRC			0x1048
122 #define AZX_REG_VS_D0I3C		0x104A
123 #define AZX_REG_VS_PCE			0x104B
124 #define AZX_REG_VS_L2MAGC		0x1050
125 #define AZX_REG_VS_L2LAHPT		0x1054
126 #define AZX_REG_VS_SDXDPIB_XBASE	0x1084
127 #define AZX_REG_VS_SDXDPIB_XINTERVAL	0x20
128 #define AZX_REG_VS_SDXEFIFOS_XBASE	0x1094
129 #define AZX_REG_VS_SDXEFIFOS_XINTERVAL	0x20
130 
131 /* PCI space */
132 #define AZX_PCIREG_TCSEL		0x44
133 
134 /*
135  * other constants
136  */
137 
138 /* max number of fragments - we may use more if allocating more pages for BDL */
139 #define BDL_SIZE		4096
140 #define AZX_MAX_BDL_ENTRIES	(BDL_SIZE / 16)
141 #define AZX_MAX_FRAG		32
142 /* max buffer size - no h/w limit, you can increase as you like */
143 #define AZX_MAX_BUF_SIZE	(1024*1024*1024)
144 
145 /* RIRB int mask: overrun[2], response[0] */
146 #define RIRB_INT_RESPONSE	0x01
147 #define RIRB_INT_OVERRUN	0x04
148 #define RIRB_INT_MASK		0x05
149 
150 /* STATESTS int mask: S3,SD2,SD1,SD0 */
151 #define STATESTS_INT_MASK	((1 << HDA_MAX_CODECS) - 1)
152 
153 /* SD_CTL bits */
154 #define SD_CTL_STREAM_RESET	0x01	/* stream reset bit */
155 #define SD_CTL_DMA_START	0x02	/* stream DMA start bit */
156 #define SD_CTL_STRIPE		(3 << 16)	/* stripe control */
157 #define SD_CTL_TRAFFIC_PRIO	(1 << 18)	/* traffic priority */
158 #define SD_CTL_DIR		(1 << 19)	/* bi-directional stream */
159 #define SD_CTL_STREAM_TAG_MASK	(0xf << 20)
160 #define SD_CTL_STREAM_TAG_SHIFT	20
161 
162 /* SD_CTL and SD_STS */
163 #define SD_INT_DESC_ERR		0x10	/* descriptor error interrupt */
164 #define SD_INT_FIFO_ERR		0x08	/* FIFO error interrupt */
165 #define SD_INT_COMPLETE		0x04	/* completion interrupt */
166 #define SD_INT_MASK		(SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\
167 				 SD_INT_COMPLETE)
168 
169 /* SD_STS */
170 #define SD_STS_FIFO_READY	0x20	/* FIFO ready */
171 
172 /* INTCTL and INTSTS */
173 #define AZX_INT_ALL_STREAM	0xff	   /* all stream interrupts */
174 #define AZX_INT_CTRL_EN	0x40000000 /* controller interrupt enable bit */
175 #define AZX_INT_GLOBAL_EN	0x80000000 /* global interrupt enable bit */
176 
177 /* below are so far hardcoded - should read registers in future */
178 #define AZX_MAX_CORB_ENTRIES	256
179 #define AZX_MAX_RIRB_ENTRIES	256
180 
181 /* Capability header  Structure */
182 #define AZX_REG_CAP_HDR			0x0
183 #define AZX_CAP_HDR_VER_OFF		28
184 #define AZX_CAP_HDR_VER_MASK		(0xF << AZX_CAP_HDR_VER_OFF)
185 #define AZX_CAP_HDR_ID_OFF		16
186 #define AZX_CAP_HDR_ID_MASK		(0xFFF << AZX_CAP_HDR_ID_OFF)
187 #define AZX_CAP_HDR_NXT_PTR_MASK	0xFFFF
188 
189 /* registers of Software Position Based FIFO Capability Structure */
190 #define AZX_SPB_CAP_ID			0x4
191 #define AZX_REG_SPB_BASE_ADDR		0x700
192 #define AZX_REG_SPB_SPBFCH		0x00
193 #define AZX_REG_SPB_SPBFCCTL		0x04
194 /* Base used to calculate the iterating register offset */
195 #define AZX_SPB_BASE			0x08
196 /* Interval used to calculate the iterating register offset */
197 #define AZX_SPB_INTERVAL		0x08
198 /* SPIB base */
199 #define AZX_SPB_SPIB			0x00
200 /* SPIB MAXFIFO base*/
201 #define AZX_SPB_MAXFIFO			0x04
202 
203 /* registers of Global Time Synchronization Capability Structure */
204 #define AZX_GTS_CAP_ID			0x1
205 #define AZX_REG_GTS_GTSCH		0x00
206 #define AZX_REG_GTS_GTSCD		0x04
207 #define AZX_REG_GTS_GTSCTLAC		0x0C
208 #define AZX_GTS_BASE			0x20
209 #define AZX_GTS_INTERVAL		0x20
210 
211 /* registers for Processing Pipe Capability Structure */
212 #define AZX_PP_CAP_ID			0x3
213 #define AZX_REG_PP_PPCH			0x10
214 #define AZX_REG_PP_PPCTL		0x04
215 #define AZX_PPCTL_PIE			(1<<31)
216 #define AZX_PPCTL_GPROCEN		(1<<30)
217 /* _X_ = dma engine # and cannot * exceed 29 (per spec max 30 dma engines) */
218 #define AZX_PPCTL_PROCEN(_X_)		(1<<(_X_))
219 
220 #define AZX_REG_PP_PPSTS		0x08
221 
222 #define AZX_PPHC_BASE			0x10
223 #define AZX_PPHC_INTERVAL		0x10
224 
225 #define AZX_REG_PPHCLLPL		0x0
226 #define AZX_REG_PPHCLLPU		0x4
227 #define AZX_REG_PPHCLDPL		0x8
228 #define AZX_REG_PPHCLDPU		0xC
229 
230 #define AZX_PPLC_BASE			0x10
231 #define AZX_PPLC_MULTI			0x10
232 #define AZX_PPLC_INTERVAL		0x10
233 
234 #define AZX_REG_PPLCCTL			0x0
235 #define AZX_PPLCCTL_STRM_BITS		4
236 #define AZX_PPLCCTL_STRM_SHIFT		20
237 #define AZX_REG_MASK(bit_num, offset) \
238 	(((1 << (bit_num)) - 1) << (offset))
239 #define AZX_PPLCCTL_STRM_MASK \
240 	AZX_REG_MASK(AZX_PPLCCTL_STRM_BITS, AZX_PPLCCTL_STRM_SHIFT)
241 #define AZX_PPLCCTL_RUN			(1<<1)
242 #define AZX_PPLCCTL_STRST		(1<<0)
243 
244 #define AZX_REG_PPLCFMT			0x4
245 #define AZX_REG_PPLCLLPL		0x8
246 #define AZX_REG_PPLCLLPU		0xC
247 
248 /* registers for Multiple Links Capability Structure */
249 #define AZX_ML_CAP_ID			0x2
250 #define AZX_REG_ML_MLCH			0x00
251 #define AZX_REG_ML_MLCD			0x04
252 #define AZX_ML_BASE			0x40
253 #define AZX_ML_INTERVAL			0x40
254 
255 #define AZX_REG_ML_LCAP			0x00
256 #define AZX_REG_ML_LCTL			0x04
257 #define AZX_REG_ML_LOSIDV		0x08
258 #define AZX_REG_ML_LSDIID		0x0C
259 #define AZX_REG_ML_LPSOO		0x10
260 #define AZX_REG_ML_LPSIO		0x12
261 #define AZX_REG_ML_LWALFC		0x18
262 #define AZX_REG_ML_LOUTPAY		0x20
263 #define AZX_REG_ML_LINPAY		0x30
264 
265 #define ML_LCTL_SCF_MASK			0xF
266 #define AZX_MLCTL_SPA				(0x1 << 16)
267 #define AZX_MLCTL_CPA				(0x1 << 23)
268 #define AZX_MLCTL_SPA_SHIFT			16
269 #define AZX_MLCTL_CPA_SHIFT			23
270 
271 /* registers for DMA Resume Capability Structure */
272 #define AZX_DRSM_CAP_ID			0x5
273 #define AZX_REG_DRSM_CTL		0x4
274 /* Base used to calculate the iterating register offset */
275 #define AZX_DRSM_BASE			0x08
276 /* Interval used to calculate the iterating register offset */
277 #define AZX_DRSM_INTERVAL		0x08
278 
279 /* Global time synchronization registers */
280 #define GTSCC_TSCCD_MASK		0x80000000
281 #define GTSCC_TSCCD_SHIFT		BIT(31)
282 #define GTSCC_TSCCI_MASK		0x20
283 #define GTSCC_CDMAS_DMA_DIR_SHIFT	4
284 
285 #define WALFCC_CIF_MASK			0x1FF
286 #define WALFCC_FN_SHIFT			9
287 #define HDA_CLK_CYCLES_PER_FRAME	512
288 
289 /*
290  * An error occurs near frame "rollover". The clocks in frame value indicates
291  * whether this error may have occurred. Here we use the value of 10. Please
292  * see the errata for the right number [<10]
293  */
294 #define HDA_MAX_CYCLE_VALUE		499
295 #define HDA_MAX_CYCLE_OFFSET		10
296 #define HDA_MAX_CYCLE_READ_RETRY	10
297 
298 #define TSCCU_CCU_SHIFT			32
299 #define LLPC_CCU_SHIFT			32
300 
301 
302 /*
303  * helpers to read the stream position
304  */
305 static inline unsigned int
snd_hdac_stream_get_pos_lpib(struct hdac_stream * stream)306 snd_hdac_stream_get_pos_lpib(struct hdac_stream *stream)
307 {
308 	return snd_hdac_stream_readl(stream, SD_LPIB);
309 }
310 
311 static inline unsigned int
snd_hdac_stream_get_pos_posbuf(struct hdac_stream * stream)312 snd_hdac_stream_get_pos_posbuf(struct hdac_stream *stream)
313 {
314 	return le32_to_cpu(*stream->posbuf);
315 }
316 
317 #endif /* __SOUND_HDA_REGISTER_H */
318