1 /*
2 * PWM device driver for ST SoCs
3 *
4 * Copyright (C) 2013-2016 STMicroelectronics (R&D) Limited
5 *
6 * Author: Ajit Pal Singh <ajitpal.singh@st.com>
7 * Lee Jones <lee.jones@linaro.org>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 */
14
15 #include <linux/clk.h>
16 #include <linux/interrupt.h>
17 #include <linux/math64.h>
18 #include <linux/mfd/syscon.h>
19 #include <linux/module.h>
20 #include <linux/of.h>
21 #include <linux/platform_device.h>
22 #include <linux/pwm.h>
23 #include <linux/regmap.h>
24 #include <linux/sched.h>
25 #include <linux/slab.h>
26 #include <linux/time.h>
27 #include <linux/wait.h>
28
29 #define PWM_OUT_VAL(x) (0x00 + (4 * (x))) /* Device's Duty Cycle register */
30 #define PWM_CPT_VAL(x) (0x10 + (4 * (x))) /* Capture value */
31 #define PWM_CPT_EDGE(x) (0x30 + (4 * (x))) /* Edge to capture on */
32
33 #define STI_PWM_CTRL 0x50 /* Control/Config register */
34 #define STI_INT_EN 0x54 /* Interrupt Enable/Disable register */
35 #define STI_INT_STA 0x58 /* Interrupt Status register */
36 #define PWM_INT_ACK 0x5c
37 #define PWM_PRESCALE_LOW_MASK 0x0f
38 #define PWM_PRESCALE_HIGH_MASK 0xf0
39 #define PWM_CPT_EDGE_MASK 0x03
40 #define PWM_INT_ACK_MASK 0x1ff
41
42 #define STI_MAX_CPT_DEVS 4
43 #define CPT_DC_MAX 0xff
44
45 /* Regfield IDs */
46 enum {
47 /* Bits in PWM_CTRL*/
48 PWMCLK_PRESCALE_LOW,
49 PWMCLK_PRESCALE_HIGH,
50 CPTCLK_PRESCALE,
51
52 PWM_OUT_EN,
53 PWM_CPT_EN,
54
55 PWM_CPT_INT_EN,
56 PWM_CPT_INT_STAT,
57
58 /* Keep last */
59 MAX_REGFIELDS
60 };
61
62 /*
63 * Each capture input can be programmed to detect rising-edge, falling-edge,
64 * either edge or neither egde.
65 */
66 enum sti_cpt_edge {
67 CPT_EDGE_DISABLED,
68 CPT_EDGE_RISING,
69 CPT_EDGE_FALLING,
70 CPT_EDGE_BOTH,
71 };
72
73 struct sti_cpt_ddata {
74 u32 snapshot[3];
75 unsigned int index;
76 struct mutex lock;
77 wait_queue_head_t wait;
78 };
79
80 struct sti_pwm_compat_data {
81 const struct reg_field *reg_fields;
82 unsigned int pwm_num_devs;
83 unsigned int cpt_num_devs;
84 unsigned int max_pwm_cnt;
85 unsigned int max_prescale;
86 };
87
88 struct sti_pwm_chip {
89 struct device *dev;
90 struct clk *pwm_clk;
91 struct clk *cpt_clk;
92 struct regmap *regmap;
93 struct sti_pwm_compat_data *cdata;
94 struct regmap_field *prescale_low;
95 struct regmap_field *prescale_high;
96 struct regmap_field *pwm_out_en;
97 struct regmap_field *pwm_cpt_en;
98 struct regmap_field *pwm_cpt_int_en;
99 struct regmap_field *pwm_cpt_int_stat;
100 struct pwm_chip chip;
101 struct pwm_device *cur;
102 unsigned long configured;
103 unsigned int en_count;
104 struct mutex sti_pwm_lock; /* To sync between enable/disable calls */
105 void __iomem *mmio;
106 };
107
108 static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = {
109 [PWMCLK_PRESCALE_LOW] = REG_FIELD(STI_PWM_CTRL, 0, 3),
110 [PWMCLK_PRESCALE_HIGH] = REG_FIELD(STI_PWM_CTRL, 11, 14),
111 [CPTCLK_PRESCALE] = REG_FIELD(STI_PWM_CTRL, 4, 8),
112 [PWM_OUT_EN] = REG_FIELD(STI_PWM_CTRL, 9, 9),
113 [PWM_CPT_EN] = REG_FIELD(STI_PWM_CTRL, 10, 10),
114 [PWM_CPT_INT_EN] = REG_FIELD(STI_INT_EN, 1, 4),
115 [PWM_CPT_INT_STAT] = REG_FIELD(STI_INT_STA, 1, 4),
116 };
117
to_sti_pwmchip(struct pwm_chip * chip)118 static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip)
119 {
120 return container_of(chip, struct sti_pwm_chip, chip);
121 }
122
123 /*
124 * Calculate the prescaler value corresponding to the period.
125 */
sti_pwm_get_prescale(struct sti_pwm_chip * pc,unsigned long period,unsigned int * prescale)126 static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, unsigned long period,
127 unsigned int *prescale)
128 {
129 struct sti_pwm_compat_data *cdata = pc->cdata;
130 unsigned long clk_rate;
131 unsigned long value;
132 unsigned int ps;
133
134 clk_rate = clk_get_rate(pc->pwm_clk);
135 if (!clk_rate) {
136 dev_err(pc->dev, "failed to get clock rate\n");
137 return -EINVAL;
138 }
139
140 /*
141 * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_cnt + 1)) - 1
142 */
143 value = NSEC_PER_SEC / clk_rate;
144 value *= cdata->max_pwm_cnt + 1;
145
146 if (period % value)
147 return -EINVAL;
148
149 ps = period / value - 1;
150 if (ps > cdata->max_prescale)
151 return -EINVAL;
152
153 *prescale = ps;
154
155 return 0;
156 }
157
158 /*
159 * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles. The
160 * only way to change the period (apart from changing the PWM input clock) is
161 * to change the PWM clock prescaler.
162 *
163 * The prescaler is of 8 bits, so 256 prescaler values and hence 256 possible
164 * period values are supported (for a particular clock rate). The requested
165 * period will be applied only if it matches one of these 256 values.
166 */
sti_pwm_config(struct pwm_chip * chip,struct pwm_device * pwm,int duty_ns,int period_ns)167 static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
168 int duty_ns, int period_ns)
169 {
170 struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
171 struct sti_pwm_compat_data *cdata = pc->cdata;
172 unsigned int ncfg, value, prescale = 0;
173 struct pwm_device *cur = pc->cur;
174 struct device *dev = pc->dev;
175 bool period_same = false;
176 int ret;
177
178 ncfg = hweight_long(pc->configured);
179 if (ncfg)
180 period_same = (period_ns == pwm_get_period(cur));
181
182 /*
183 * Allow configuration changes if one of the following conditions
184 * satisfy.
185 * 1. No devices have been configured.
186 * 2. Only one device has been configured and the new request is for
187 * the same device.
188 * 3. Only one device has been configured and the new request is for
189 * a new device and period of the new device is same as the current
190 * configured period.
191 * 4. More than one devices are configured and period of the new
192 * requestis the same as the current period.
193 */
194 if (!ncfg ||
195 ((ncfg == 1) && (pwm->hwpwm == cur->hwpwm)) ||
196 ((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) ||
197 ((ncfg > 1) && period_same)) {
198 /* Enable clock before writing to PWM registers. */
199 ret = clk_enable(pc->pwm_clk);
200 if (ret)
201 return ret;
202
203 ret = clk_enable(pc->cpt_clk);
204 if (ret)
205 return ret;
206
207 if (!period_same) {
208 ret = sti_pwm_get_prescale(pc, period_ns, &prescale);
209 if (ret)
210 goto clk_dis;
211
212 value = prescale & PWM_PRESCALE_LOW_MASK;
213
214 ret = regmap_field_write(pc->prescale_low, value);
215 if (ret)
216 goto clk_dis;
217
218 value = (prescale & PWM_PRESCALE_HIGH_MASK) >> 4;
219
220 ret = regmap_field_write(pc->prescale_high, value);
221 if (ret)
222 goto clk_dis;
223 }
224
225 /*
226 * When PWMVal == 0, PWM pulse = 1 local clock cycle.
227 * When PWMVal == max_pwm_count,
228 * PWM pulse = (max_pwm_count + 1) local cycles,
229 * that is continuous pulse: signal never goes low.
230 */
231 value = cdata->max_pwm_cnt * duty_ns / period_ns;
232
233 ret = regmap_write(pc->regmap, PWM_OUT_VAL(pwm->hwpwm), value);
234 if (ret)
235 goto clk_dis;
236
237 ret = regmap_field_write(pc->pwm_cpt_int_en, 0);
238
239 set_bit(pwm->hwpwm, &pc->configured);
240 pc->cur = pwm;
241
242 dev_dbg(dev, "prescale:%u, period:%i, duty:%i, value:%u\n",
243 prescale, period_ns, duty_ns, value);
244 } else {
245 return -EINVAL;
246 }
247
248 clk_dis:
249 clk_disable(pc->pwm_clk);
250 clk_disable(pc->cpt_clk);
251 return ret;
252 }
253
sti_pwm_enable(struct pwm_chip * chip,struct pwm_device * pwm)254 static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
255 {
256 struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
257 struct device *dev = pc->dev;
258 int ret = 0;
259
260 /*
261 * Since we have a common enable for all PWM devices, do not enable if
262 * already enabled.
263 */
264 mutex_lock(&pc->sti_pwm_lock);
265
266 if (!pc->en_count) {
267 ret = clk_enable(pc->pwm_clk);
268 if (ret)
269 goto out;
270
271 ret = clk_enable(pc->cpt_clk);
272 if (ret)
273 goto out;
274
275 ret = regmap_field_write(pc->pwm_out_en, 1);
276 if (ret) {
277 dev_err(dev, "failed to enable PWM device %u: %d\n",
278 pwm->hwpwm, ret);
279 goto out;
280 }
281 }
282
283 pc->en_count++;
284
285 out:
286 mutex_unlock(&pc->sti_pwm_lock);
287 return ret;
288 }
289
sti_pwm_disable(struct pwm_chip * chip,struct pwm_device * pwm)290 static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
291 {
292 struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
293
294 mutex_lock(&pc->sti_pwm_lock);
295
296 if (--pc->en_count) {
297 mutex_unlock(&pc->sti_pwm_lock);
298 return;
299 }
300
301 regmap_field_write(pc->pwm_out_en, 0);
302
303 clk_disable(pc->pwm_clk);
304 clk_disable(pc->cpt_clk);
305
306 mutex_unlock(&pc->sti_pwm_lock);
307 }
308
sti_pwm_free(struct pwm_chip * chip,struct pwm_device * pwm)309 static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
310 {
311 struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
312
313 clear_bit(pwm->hwpwm, &pc->configured);
314 }
315
sti_pwm_capture(struct pwm_chip * chip,struct pwm_device * pwm,struct pwm_capture * result,unsigned long timeout)316 static int sti_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm,
317 struct pwm_capture *result, unsigned long timeout)
318 {
319 struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
320 struct sti_pwm_compat_data *cdata = pc->cdata;
321 struct sti_cpt_ddata *ddata = pwm_get_chip_data(pwm);
322 struct device *dev = pc->dev;
323 unsigned int effective_ticks;
324 unsigned long long high, low;
325 int ret;
326
327 if (pwm->hwpwm >= cdata->cpt_num_devs) {
328 dev_err(dev, "device %u is not valid\n", pwm->hwpwm);
329 return -EINVAL;
330 }
331
332 mutex_lock(&ddata->lock);
333 ddata->index = 0;
334
335 /* Prepare capture measurement */
336 regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_RISING);
337 regmap_field_write(pc->pwm_cpt_int_en, BIT(pwm->hwpwm));
338
339 /* Enable capture */
340 ret = regmap_field_write(pc->pwm_cpt_en, 1);
341 if (ret) {
342 dev_err(dev, "failed to enable PWM capture %u: %d\n",
343 pwm->hwpwm, ret);
344 goto out;
345 }
346
347 ret = wait_event_interruptible_timeout(ddata->wait, ddata->index > 1,
348 msecs_to_jiffies(timeout));
349
350 regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_DISABLED);
351
352 if (ret == -ERESTARTSYS)
353 goto out;
354
355 switch (ddata->index) {
356 case 0:
357 case 1:
358 /*
359 * Getting here could mean:
360 * - input signal is constant of less than 1 Hz
361 * - there is no input signal at all
362 *
363 * In such case the frequency is rounded down to 0
364 */
365 result->period = 0;
366 result->duty_cycle = 0;
367
368 break;
369
370 case 2:
371 /* We have everying we need */
372 high = ddata->snapshot[1] - ddata->snapshot[0];
373 low = ddata->snapshot[2] - ddata->snapshot[1];
374
375 effective_ticks = clk_get_rate(pc->cpt_clk);
376
377 result->period = (high + low) * NSEC_PER_SEC;
378 result->period /= effective_ticks;
379
380 result->duty_cycle = high * NSEC_PER_SEC;
381 result->duty_cycle /= effective_ticks;
382
383 break;
384
385 default:
386 dev_err(dev, "internal error\n");
387 break;
388 }
389
390 out:
391 /* Disable capture */
392 regmap_field_write(pc->pwm_cpt_en, 0);
393
394 mutex_unlock(&ddata->lock);
395 return ret;
396 }
397
398 static const struct pwm_ops sti_pwm_ops = {
399 .capture = sti_pwm_capture,
400 .config = sti_pwm_config,
401 .enable = sti_pwm_enable,
402 .disable = sti_pwm_disable,
403 .free = sti_pwm_free,
404 .owner = THIS_MODULE,
405 };
406
sti_pwm_interrupt(int irq,void * data)407 static irqreturn_t sti_pwm_interrupt(int irq, void *data)
408 {
409 struct sti_pwm_chip *pc = data;
410 struct device *dev = pc->dev;
411 struct sti_cpt_ddata *ddata;
412 int devicenum;
413 unsigned int cpt_int_stat;
414 unsigned int reg;
415 int ret = IRQ_NONE;
416
417 ret = regmap_field_read(pc->pwm_cpt_int_stat, &cpt_int_stat);
418 if (ret)
419 return ret;
420
421 while (cpt_int_stat) {
422 devicenum = ffs(cpt_int_stat) - 1;
423
424 ddata = pwm_get_chip_data(&pc->chip.pwms[devicenum]);
425
426 /*
427 * Capture input:
428 * _______ _______
429 * | | | |
430 * __| |_________________| |________
431 * ^0 ^1 ^2
432 *
433 * Capture start by the first available rising edge. When a
434 * capture event occurs, capture value (CPT_VALx) is stored,
435 * index incremented, capture edge changed.
436 *
437 * After the capture, if the index > 1, we have collected the
438 * necessary data so we signal the thread waiting for it and
439 * disable the capture by setting capture edge to none
440 */
441
442 regmap_read(pc->regmap,
443 PWM_CPT_VAL(devicenum),
444 &ddata->snapshot[ddata->index]);
445
446 switch (ddata->index) {
447 case 0:
448 case 1:
449 regmap_read(pc->regmap, PWM_CPT_EDGE(devicenum), ®);
450 reg ^= PWM_CPT_EDGE_MASK;
451 regmap_write(pc->regmap, PWM_CPT_EDGE(devicenum), reg);
452
453 ddata->index++;
454 break;
455
456 case 2:
457 regmap_write(pc->regmap,
458 PWM_CPT_EDGE(devicenum),
459 CPT_EDGE_DISABLED);
460 wake_up(&ddata->wait);
461 break;
462
463 default:
464 dev_err(dev, "Internal error\n");
465 }
466
467 cpt_int_stat &= ~BIT_MASK(devicenum);
468
469 ret = IRQ_HANDLED;
470 }
471
472 /* Just ACK everything */
473 regmap_write(pc->regmap, PWM_INT_ACK, PWM_INT_ACK_MASK);
474
475 return ret;
476 }
477
sti_pwm_probe_dt(struct sti_pwm_chip * pc)478 static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
479 {
480 struct device *dev = pc->dev;
481 const struct reg_field *reg_fields;
482 struct device_node *np = dev->of_node;
483 struct sti_pwm_compat_data *cdata = pc->cdata;
484 u32 num_devs;
485 int ret;
486
487 ret = of_property_read_u32(np, "st,pwm-num-chan", &num_devs);
488 if (!ret)
489 cdata->pwm_num_devs = num_devs;
490
491 ret = of_property_read_u32(np, "st,capture-num-chan", &num_devs);
492 if (!ret)
493 cdata->cpt_num_devs = num_devs;
494
495 if (!cdata->pwm_num_devs && !cdata->cpt_num_devs) {
496 dev_err(dev, "No channels configured\n");
497 return -EINVAL;
498 }
499
500 reg_fields = cdata->reg_fields;
501
502 pc->prescale_low = devm_regmap_field_alloc(dev, pc->regmap,
503 reg_fields[PWMCLK_PRESCALE_LOW]);
504 if (IS_ERR(pc->prescale_low))
505 return PTR_ERR(pc->prescale_low);
506
507 pc->prescale_high = devm_regmap_field_alloc(dev, pc->regmap,
508 reg_fields[PWMCLK_PRESCALE_HIGH]);
509 if (IS_ERR(pc->prescale_high))
510 return PTR_ERR(pc->prescale_high);
511
512
513 pc->pwm_out_en = devm_regmap_field_alloc(dev, pc->regmap,
514 reg_fields[PWM_OUT_EN]);
515 if (IS_ERR(pc->pwm_out_en))
516 return PTR_ERR(pc->pwm_out_en);
517
518 pc->pwm_cpt_en = devm_regmap_field_alloc(dev, pc->regmap,
519 reg_fields[PWM_CPT_EN]);
520 if (IS_ERR(pc->pwm_cpt_en))
521 return PTR_ERR(pc->pwm_cpt_en);
522
523 pc->pwm_cpt_int_en = devm_regmap_field_alloc(dev, pc->regmap,
524 reg_fields[PWM_CPT_INT_EN]);
525 if (IS_ERR(pc->pwm_cpt_int_en))
526 return PTR_ERR(pc->pwm_cpt_int_en);
527
528 pc->pwm_cpt_int_stat = devm_regmap_field_alloc(dev, pc->regmap,
529 reg_fields[PWM_CPT_INT_STAT]);
530 if (PTR_ERR_OR_ZERO(pc->pwm_cpt_int_stat))
531 return PTR_ERR(pc->pwm_cpt_int_stat);
532
533 return 0;
534 }
535
536 static const struct regmap_config sti_pwm_regmap_config = {
537 .reg_bits = 32,
538 .val_bits = 32,
539 .reg_stride = 4,
540 };
541
sti_pwm_probe(struct platform_device * pdev)542 static int sti_pwm_probe(struct platform_device *pdev)
543 {
544 struct device *dev = &pdev->dev;
545 struct sti_pwm_compat_data *cdata;
546 struct sti_pwm_chip *pc;
547 struct resource *res;
548 unsigned int i;
549 int irq, ret;
550
551 pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
552 if (!pc)
553 return -ENOMEM;
554
555 cdata = devm_kzalloc(dev, sizeof(*cdata), GFP_KERNEL);
556 if (!cdata)
557 return -ENOMEM;
558
559 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
560
561 pc->mmio = devm_ioremap_resource(dev, res);
562 if (IS_ERR(pc->mmio))
563 return PTR_ERR(pc->mmio);
564
565 pc->regmap = devm_regmap_init_mmio(dev, pc->mmio,
566 &sti_pwm_regmap_config);
567 if (IS_ERR(pc->regmap))
568 return PTR_ERR(pc->regmap);
569
570 irq = platform_get_irq(pdev, 0);
571 if (irq < 0) {
572 dev_err(&pdev->dev, "Failed to obtain IRQ\n");
573 return irq;
574 }
575
576 ret = devm_request_irq(&pdev->dev, irq, sti_pwm_interrupt, 0,
577 pdev->name, pc);
578 if (ret < 0) {
579 dev_err(&pdev->dev, "Failed to request IRQ\n");
580 return ret;
581 }
582
583 /*
584 * Setup PWM data with default values: some values could be replaced
585 * with specific ones provided from Device Tree.
586 */
587 cdata->reg_fields = sti_pwm_regfields;
588 cdata->max_prescale = 0xff;
589 cdata->max_pwm_cnt = 255;
590 cdata->pwm_num_devs = 0;
591 cdata->cpt_num_devs = 0;
592
593 pc->cdata = cdata;
594 pc->dev = dev;
595 pc->en_count = 0;
596 mutex_init(&pc->sti_pwm_lock);
597
598 ret = sti_pwm_probe_dt(pc);
599 if (ret)
600 return ret;
601
602 if (!cdata->pwm_num_devs)
603 goto skip_pwm;
604
605 pc->pwm_clk = of_clk_get_by_name(dev->of_node, "pwm");
606 if (IS_ERR(pc->pwm_clk)) {
607 dev_err(dev, "failed to get PWM clock\n");
608 return PTR_ERR(pc->pwm_clk);
609 }
610
611 ret = clk_prepare(pc->pwm_clk);
612 if (ret) {
613 dev_err(dev, "failed to prepare clock\n");
614 return ret;
615 }
616
617 skip_pwm:
618 if (!cdata->cpt_num_devs)
619 goto skip_cpt;
620
621 pc->cpt_clk = of_clk_get_by_name(dev->of_node, "capture");
622 if (IS_ERR(pc->cpt_clk)) {
623 dev_err(dev, "failed to get PWM capture clock\n");
624 return PTR_ERR(pc->cpt_clk);
625 }
626
627 ret = clk_prepare(pc->cpt_clk);
628 if (ret) {
629 dev_err(dev, "failed to prepare clock\n");
630 return ret;
631 }
632
633 skip_cpt:
634 pc->chip.dev = dev;
635 pc->chip.ops = &sti_pwm_ops;
636 pc->chip.base = -1;
637 pc->chip.npwm = pc->cdata->pwm_num_devs;
638
639 ret = pwmchip_add(&pc->chip);
640 if (ret < 0) {
641 clk_unprepare(pc->pwm_clk);
642 clk_unprepare(pc->cpt_clk);
643 return ret;
644 }
645
646 for (i = 0; i < cdata->cpt_num_devs; i++) {
647 struct sti_cpt_ddata *ddata;
648
649 ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
650 if (!ddata)
651 return -ENOMEM;
652
653 init_waitqueue_head(&ddata->wait);
654 mutex_init(&ddata->lock);
655
656 pwm_set_chip_data(&pc->chip.pwms[i], ddata);
657 }
658
659 platform_set_drvdata(pdev, pc);
660
661 return 0;
662 }
663
sti_pwm_remove(struct platform_device * pdev)664 static int sti_pwm_remove(struct platform_device *pdev)
665 {
666 struct sti_pwm_chip *pc = platform_get_drvdata(pdev);
667 unsigned int i;
668
669 for (i = 0; i < pc->cdata->pwm_num_devs; i++)
670 pwm_disable(&pc->chip.pwms[i]);
671
672 clk_unprepare(pc->pwm_clk);
673 clk_unprepare(pc->cpt_clk);
674
675 return pwmchip_remove(&pc->chip);
676 }
677
678 static const struct of_device_id sti_pwm_of_match[] = {
679 { .compatible = "st,sti-pwm", },
680 { /* sentinel */ }
681 };
682 MODULE_DEVICE_TABLE(of, sti_pwm_of_match);
683
684 static struct platform_driver sti_pwm_driver = {
685 .driver = {
686 .name = "sti-pwm",
687 .of_match_table = sti_pwm_of_match,
688 },
689 .probe = sti_pwm_probe,
690 .remove = sti_pwm_remove,
691 };
692 module_platform_driver(sti_pwm_driver);
693
694 MODULE_AUTHOR("Ajit Pal Singh <ajitpal.singh@st.com>");
695 MODULE_DESCRIPTION("STMicroelectronics ST PWM driver");
696 MODULE_LICENSE("GPL");
697