1 /*
2 * Regulator driver for DA9055 PMIC
3 *
4 * Copyright(c) 2012 Dialog Semiconductor Ltd.
5 *
6 * Author: David Dajun Chen <dchen@diasemi.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 */
14
15 #include <linux/module.h>
16 #include <linux/init.h>
17 #include <linux/err.h>
18 #include <linux/gpio.h>
19 #include <linux/gpio/consumer.h>
20 #include <linux/platform_device.h>
21 #include <linux/regulator/driver.h>
22 #include <linux/regulator/machine.h>
23 #include <linux/of.h>
24 #include <linux/regulator/of_regulator.h>
25
26 #include <linux/mfd/da9055/core.h>
27 #include <linux/mfd/da9055/reg.h>
28 #include <linux/mfd/da9055/pdata.h>
29
30 #define DA9055_MIN_UA 0
31 #define DA9055_MAX_UA 3
32
33 #define DA9055_LDO_MODE_SYNC 0
34 #define DA9055_LDO_MODE_SLEEP 1
35
36 #define DA9055_BUCK_MODE_SLEEP 1
37 #define DA9055_BUCK_MODE_SYNC 2
38 #define DA9055_BUCK_MODE_AUTO 3
39
40 /* DA9055 REGULATOR IDs */
41 #define DA9055_ID_BUCK1 0
42 #define DA9055_ID_BUCK2 1
43 #define DA9055_ID_LDO1 2
44 #define DA9055_ID_LDO2 3
45 #define DA9055_ID_LDO3 4
46 #define DA9055_ID_LDO4 5
47 #define DA9055_ID_LDO5 6
48 #define DA9055_ID_LDO6 7
49
50 /* DA9055 BUCK current limit */
51 static const int da9055_current_limits[] = { 500000, 600000, 700000, 800000 };
52
53 struct da9055_conf_reg {
54 int reg;
55 int sel_mask;
56 int en_mask;
57 };
58
59 struct da9055_volt_reg {
60 int reg_a;
61 int reg_b;
62 int sl_shift;
63 int v_mask;
64 };
65
66 struct da9055_mode_reg {
67 int reg;
68 int mask;
69 int shift;
70 };
71
72 struct da9055_regulator_info {
73 struct regulator_desc reg_desc;
74 struct da9055_conf_reg conf;
75 struct da9055_volt_reg volt;
76 struct da9055_mode_reg mode;
77 };
78
79 struct da9055_regulator {
80 struct da9055 *da9055;
81 struct da9055_regulator_info *info;
82 struct regulator_dev *rdev;
83 enum gpio_select reg_rselect;
84 };
85
da9055_buck_get_mode(struct regulator_dev * rdev)86 static unsigned int da9055_buck_get_mode(struct regulator_dev *rdev)
87 {
88 struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
89 struct da9055_regulator_info *info = regulator->info;
90 int ret, mode = 0;
91
92 ret = da9055_reg_read(regulator->da9055, info->mode.reg);
93 if (ret < 0)
94 return ret;
95
96 switch ((ret & info->mode.mask) >> info->mode.shift) {
97 case DA9055_BUCK_MODE_SYNC:
98 mode = REGULATOR_MODE_FAST;
99 break;
100 case DA9055_BUCK_MODE_AUTO:
101 mode = REGULATOR_MODE_NORMAL;
102 break;
103 case DA9055_BUCK_MODE_SLEEP:
104 mode = REGULATOR_MODE_STANDBY;
105 break;
106 }
107
108 return mode;
109 }
110
da9055_buck_set_mode(struct regulator_dev * rdev,unsigned int mode)111 static int da9055_buck_set_mode(struct regulator_dev *rdev,
112 unsigned int mode)
113 {
114 struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
115 struct da9055_regulator_info *info = regulator->info;
116 int val = 0;
117
118 switch (mode) {
119 case REGULATOR_MODE_FAST:
120 val = DA9055_BUCK_MODE_SYNC << info->mode.shift;
121 break;
122 case REGULATOR_MODE_NORMAL:
123 val = DA9055_BUCK_MODE_AUTO << info->mode.shift;
124 break;
125 case REGULATOR_MODE_STANDBY:
126 val = DA9055_BUCK_MODE_SLEEP << info->mode.shift;
127 break;
128 }
129
130 return da9055_reg_update(regulator->da9055, info->mode.reg,
131 info->mode.mask, val);
132 }
133
da9055_ldo_get_mode(struct regulator_dev * rdev)134 static unsigned int da9055_ldo_get_mode(struct regulator_dev *rdev)
135 {
136 struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
137 struct da9055_regulator_info *info = regulator->info;
138 int ret;
139
140 ret = da9055_reg_read(regulator->da9055, info->volt.reg_b);
141 if (ret < 0)
142 return ret;
143
144 if (ret >> info->volt.sl_shift)
145 return REGULATOR_MODE_STANDBY;
146 else
147 return REGULATOR_MODE_NORMAL;
148 }
149
da9055_ldo_set_mode(struct regulator_dev * rdev,unsigned int mode)150 static int da9055_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
151 {
152 struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
153 struct da9055_regulator_info *info = regulator->info;
154 struct da9055_volt_reg volt = info->volt;
155 int val = 0;
156
157 switch (mode) {
158 case REGULATOR_MODE_NORMAL:
159 case REGULATOR_MODE_FAST:
160 val = DA9055_LDO_MODE_SYNC;
161 break;
162 case REGULATOR_MODE_STANDBY:
163 val = DA9055_LDO_MODE_SLEEP;
164 break;
165 }
166
167 return da9055_reg_update(regulator->da9055, volt.reg_b,
168 1 << volt.sl_shift,
169 val << volt.sl_shift);
170 }
171
da9055_buck_get_current_limit(struct regulator_dev * rdev)172 static int da9055_buck_get_current_limit(struct regulator_dev *rdev)
173 {
174 struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
175 struct da9055_regulator_info *info = regulator->info;
176 int ret;
177
178 ret = da9055_reg_read(regulator->da9055, DA9055_REG_BUCK_LIM);
179 if (ret < 0)
180 return ret;
181
182 ret &= info->mode.mask;
183 return da9055_current_limits[ret >> info->mode.shift];
184 }
185
da9055_buck_set_current_limit(struct regulator_dev * rdev,int min_uA,int max_uA)186 static int da9055_buck_set_current_limit(struct regulator_dev *rdev, int min_uA,
187 int max_uA)
188 {
189 struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
190 struct da9055_regulator_info *info = regulator->info;
191 int i;
192
193 for (i = ARRAY_SIZE(da9055_current_limits) - 1; i >= 0; i--) {
194 if ((min_uA <= da9055_current_limits[i]) &&
195 (da9055_current_limits[i] <= max_uA))
196 return da9055_reg_update(regulator->da9055,
197 DA9055_REG_BUCK_LIM,
198 info->mode.mask,
199 i << info->mode.shift);
200 }
201
202 return -EINVAL;
203 }
204
da9055_regulator_get_voltage_sel(struct regulator_dev * rdev)205 static int da9055_regulator_get_voltage_sel(struct regulator_dev *rdev)
206 {
207 struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
208 struct da9055_regulator_info *info = regulator->info;
209 struct da9055_volt_reg volt = info->volt;
210 int ret, sel;
211
212 /*
213 * There are two voltage register set A & B for voltage ramping but
214 * either one of then can be active therefore we first determine
215 * the active register set.
216 */
217 ret = da9055_reg_read(regulator->da9055, info->conf.reg);
218 if (ret < 0)
219 return ret;
220
221 ret &= info->conf.sel_mask;
222
223 /* Get the voltage for the active register set A/B */
224 if (ret == DA9055_REGUALTOR_SET_A)
225 ret = da9055_reg_read(regulator->da9055, volt.reg_a);
226 else
227 ret = da9055_reg_read(regulator->da9055, volt.reg_b);
228
229 if (ret < 0)
230 return ret;
231
232 sel = (ret & volt.v_mask);
233 return sel;
234 }
235
da9055_regulator_set_voltage_sel(struct regulator_dev * rdev,unsigned int selector)236 static int da9055_regulator_set_voltage_sel(struct regulator_dev *rdev,
237 unsigned int selector)
238 {
239 struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
240 struct da9055_regulator_info *info = regulator->info;
241 int ret;
242
243 /*
244 * Regulator register set A/B is not selected through GPIO therefore
245 * we use default register set A for voltage ramping.
246 */
247 if (regulator->reg_rselect == NO_GPIO) {
248 /* Select register set A */
249 ret = da9055_reg_update(regulator->da9055, info->conf.reg,
250 info->conf.sel_mask, DA9055_SEL_REG_A);
251 if (ret < 0)
252 return ret;
253
254 /* Set the voltage */
255 return da9055_reg_update(regulator->da9055, info->volt.reg_a,
256 info->volt.v_mask, selector);
257 }
258
259 /*
260 * Here regulator register set A/B is selected through GPIO.
261 * Therefore we first determine the selected register set A/B and
262 * then set the desired voltage for that register set A/B.
263 */
264 ret = da9055_reg_read(regulator->da9055, info->conf.reg);
265 if (ret < 0)
266 return ret;
267
268 ret &= info->conf.sel_mask;
269
270 /* Set the voltage */
271 if (ret == DA9055_REGUALTOR_SET_A)
272 return da9055_reg_update(regulator->da9055, info->volt.reg_a,
273 info->volt.v_mask, selector);
274 else
275 return da9055_reg_update(regulator->da9055, info->volt.reg_b,
276 info->volt.v_mask, selector);
277 }
278
da9055_regulator_set_suspend_voltage(struct regulator_dev * rdev,int uV)279 static int da9055_regulator_set_suspend_voltage(struct regulator_dev *rdev,
280 int uV)
281 {
282 struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
283 struct da9055_regulator_info *info = regulator->info;
284 int ret;
285
286 /* Select register set B for suspend voltage ramping. */
287 if (regulator->reg_rselect == NO_GPIO) {
288 ret = da9055_reg_update(regulator->da9055, info->conf.reg,
289 info->conf.sel_mask, DA9055_SEL_REG_B);
290 if (ret < 0)
291 return ret;
292 }
293
294 ret = regulator_map_voltage_linear(rdev, uV, uV);
295 if (ret < 0)
296 return ret;
297
298 return da9055_reg_update(regulator->da9055, info->volt.reg_b,
299 info->volt.v_mask, ret);
300 }
301
da9055_suspend_enable(struct regulator_dev * rdev)302 static int da9055_suspend_enable(struct regulator_dev *rdev)
303 {
304 struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
305 struct da9055_regulator_info *info = regulator->info;
306
307 /* Select register set B for voltage ramping. */
308 if (regulator->reg_rselect == NO_GPIO)
309 return da9055_reg_update(regulator->da9055, info->conf.reg,
310 info->conf.sel_mask, DA9055_SEL_REG_B);
311 else
312 return 0;
313 }
314
da9055_suspend_disable(struct regulator_dev * rdev)315 static int da9055_suspend_disable(struct regulator_dev *rdev)
316 {
317 struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
318 struct da9055_regulator_info *info = regulator->info;
319
320 /* Diselect register set B. */
321 if (regulator->reg_rselect == NO_GPIO)
322 return da9055_reg_update(regulator->da9055, info->conf.reg,
323 info->conf.sel_mask, DA9055_SEL_REG_A);
324 else
325 return 0;
326 }
327
328 static const struct regulator_ops da9055_buck_ops = {
329 .get_mode = da9055_buck_get_mode,
330 .set_mode = da9055_buck_set_mode,
331
332 .get_current_limit = da9055_buck_get_current_limit,
333 .set_current_limit = da9055_buck_set_current_limit,
334
335 .get_voltage_sel = da9055_regulator_get_voltage_sel,
336 .set_voltage_sel = da9055_regulator_set_voltage_sel,
337 .list_voltage = regulator_list_voltage_linear,
338 .map_voltage = regulator_map_voltage_linear,
339 .is_enabled = regulator_is_enabled_regmap,
340 .enable = regulator_enable_regmap,
341 .disable = regulator_disable_regmap,
342
343 .set_suspend_voltage = da9055_regulator_set_suspend_voltage,
344 .set_suspend_enable = da9055_suspend_enable,
345 .set_suspend_disable = da9055_suspend_disable,
346 .set_suspend_mode = da9055_buck_set_mode,
347 };
348
349 static const struct regulator_ops da9055_ldo_ops = {
350 .get_mode = da9055_ldo_get_mode,
351 .set_mode = da9055_ldo_set_mode,
352
353 .get_voltage_sel = da9055_regulator_get_voltage_sel,
354 .set_voltage_sel = da9055_regulator_set_voltage_sel,
355 .list_voltage = regulator_list_voltage_linear,
356 .map_voltage = regulator_map_voltage_linear,
357 .is_enabled = regulator_is_enabled_regmap,
358 .enable = regulator_enable_regmap,
359 .disable = regulator_disable_regmap,
360
361 .set_suspend_voltage = da9055_regulator_set_suspend_voltage,
362 .set_suspend_enable = da9055_suspend_enable,
363 .set_suspend_disable = da9055_suspend_disable,
364 .set_suspend_mode = da9055_ldo_set_mode,
365
366 };
367
368 #define DA9055_LDO(_id, step, min, max, vbits, voffset) \
369 {\
370 .reg_desc = {\
371 .name = #_id,\
372 .ops = &da9055_ldo_ops,\
373 .type = REGULATOR_VOLTAGE,\
374 .id = DA9055_ID_##_id,\
375 .n_voltages = (max - min) / step + 1 + (voffset), \
376 .enable_reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
377 .enable_mask = 1, \
378 .min_uV = (min) * 1000,\
379 .uV_step = (step) * 1000,\
380 .linear_min_sel = (voffset),\
381 .owner = THIS_MODULE,\
382 },\
383 .conf = {\
384 .reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
385 .sel_mask = (1 << 4),\
386 .en_mask = 1,\
387 },\
388 .volt = {\
389 .reg_a = DA9055_REG_VBCORE_A + DA9055_ID_##_id, \
390 .reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
391 .sl_shift = 7,\
392 .v_mask = (1 << (vbits)) - 1,\
393 },\
394 }
395
396 #define DA9055_BUCK(_id, step, min, max, vbits, voffset, mbits, sbits) \
397 {\
398 .reg_desc = {\
399 .name = #_id,\
400 .ops = &da9055_buck_ops,\
401 .type = REGULATOR_VOLTAGE,\
402 .id = DA9055_ID_##_id,\
403 .n_voltages = (max - min) / step + 1 + (voffset), \
404 .enable_reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
405 .enable_mask = 1,\
406 .min_uV = (min) * 1000,\
407 .uV_step = (step) * 1000,\
408 .linear_min_sel = (voffset),\
409 .owner = THIS_MODULE,\
410 },\
411 .conf = {\
412 .reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
413 .sel_mask = (1 << 4),\
414 .en_mask = 1,\
415 },\
416 .volt = {\
417 .reg_a = DA9055_REG_VBCORE_A + DA9055_ID_##_id, \
418 .reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
419 .sl_shift = 7,\
420 .v_mask = (1 << (vbits)) - 1,\
421 },\
422 .mode = {\
423 .reg = DA9055_REG_BCORE_MODE,\
424 .mask = (mbits),\
425 .shift = (sbits),\
426 },\
427 }
428
429 static struct da9055_regulator_info da9055_regulator_info[] = {
430 DA9055_BUCK(BUCK1, 25, 725, 2075, 6, 9, 0xc, 2),
431 DA9055_BUCK(BUCK2, 25, 925, 2500, 6, 0, 3, 0),
432 DA9055_LDO(LDO1, 50, 900, 3300, 6, 2),
433 DA9055_LDO(LDO2, 50, 900, 3300, 6, 3),
434 DA9055_LDO(LDO3, 50, 900, 3300, 6, 2),
435 DA9055_LDO(LDO4, 50, 900, 3300, 6, 2),
436 DA9055_LDO(LDO5, 50, 900, 2750, 6, 2),
437 DA9055_LDO(LDO6, 20, 900, 3300, 7, 0),
438 };
439
440 /*
441 * Configures regulator to be controlled either through GPIO 1 or 2.
442 * GPIO can control regulator state and/or select the regulator register
443 * set A/B for voltage ramping.
444 */
da9055_gpio_init(struct da9055_regulator * regulator,struct regulator_config * config,struct da9055_pdata * pdata,int id)445 static int da9055_gpio_init(struct da9055_regulator *regulator,
446 struct regulator_config *config,
447 struct da9055_pdata *pdata, int id)
448 {
449 struct da9055_regulator_info *info = regulator->info;
450 int ret = 0;
451
452 if (!pdata)
453 return 0;
454
455 if (pdata->gpio_ren && pdata->gpio_ren[id]) {
456 char name[18];
457 int gpio_mux = pdata->gpio_ren[id];
458
459 config->ena_gpiod = pdata->ena_gpiods[id];
460 config->ena_gpio_invert = 1;
461
462 /*
463 * GPI pin is muxed with regulator to control the
464 * regulator state.
465 */
466 sprintf(name, "DA9055 GPI %d", gpio_mux);
467 ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
468 name);
469 if (ret < 0)
470 goto err;
471
472 /*
473 * Let the regulator know that its state is controlled
474 * through GPI.
475 */
476 ret = da9055_reg_update(regulator->da9055, info->conf.reg,
477 DA9055_E_GPI_MASK,
478 pdata->reg_ren[id]
479 << DA9055_E_GPI_SHIFT);
480 if (ret < 0)
481 goto err;
482 }
483
484 if (pdata->gpio_rsel && pdata->gpio_rsel[id]) {
485 char name[18];
486 int gpio_mux = pdata->gpio_rsel[id];
487
488 regulator->reg_rselect = pdata->reg_rsel[id];
489
490 /*
491 * GPI pin is muxed with regulator to select the
492 * regulator register set A/B for voltage ramping.
493 */
494 sprintf(name, "DA9055 GPI %d", gpio_mux);
495 ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
496 name);
497 if (ret < 0)
498 goto err;
499
500 /*
501 * Let the regulator know that its register set A/B
502 * will be selected through GPI for voltage ramping.
503 */
504 ret = da9055_reg_update(regulator->da9055, info->conf.reg,
505 DA9055_V_GPI_MASK,
506 pdata->reg_rsel[id]
507 << DA9055_V_GPI_SHIFT);
508 }
509
510 err:
511 return ret;
512 }
513
da9055_ldo5_6_oc_irq(int irq,void * data)514 static irqreturn_t da9055_ldo5_6_oc_irq(int irq, void *data)
515 {
516 struct da9055_regulator *regulator = data;
517
518 regulator_notifier_call_chain(regulator->rdev,
519 REGULATOR_EVENT_OVER_CURRENT, NULL);
520
521 return IRQ_HANDLED;
522 }
523
find_regulator_info(int id)524 static inline struct da9055_regulator_info *find_regulator_info(int id)
525 {
526 struct da9055_regulator_info *info;
527 int i;
528
529 for (i = 0; i < ARRAY_SIZE(da9055_regulator_info); i++) {
530 info = &da9055_regulator_info[i];
531 if (info->reg_desc.id == id)
532 return info;
533 }
534
535 return NULL;
536 }
537
538 #ifdef CONFIG_OF
539 static struct of_regulator_match da9055_reg_matches[] = {
540 { .name = "BUCK1", },
541 { .name = "BUCK2", },
542 { .name = "LDO1", },
543 { .name = "LDO2", },
544 { .name = "LDO3", },
545 { .name = "LDO4", },
546 { .name = "LDO5", },
547 { .name = "LDO6", },
548 };
549
da9055_regulator_dt_init(struct platform_device * pdev,struct da9055_regulator * regulator,struct regulator_config * config,int regid)550 static int da9055_regulator_dt_init(struct platform_device *pdev,
551 struct da9055_regulator *regulator,
552 struct regulator_config *config,
553 int regid)
554 {
555 struct device_node *nproot, *np;
556 int ret;
557
558 nproot = of_node_get(pdev->dev.parent->of_node);
559 if (!nproot)
560 return -ENODEV;
561
562 np = of_get_child_by_name(nproot, "regulators");
563 if (!np)
564 return -ENODEV;
565
566 ret = of_regulator_match(&pdev->dev, np, &da9055_reg_matches[regid], 1);
567 of_node_put(nproot);
568 if (ret < 0) {
569 dev_err(&pdev->dev, "Error matching regulator: %d\n", ret);
570 return ret;
571 }
572
573 config->init_data = da9055_reg_matches[regid].init_data;
574 config->of_node = da9055_reg_matches[regid].of_node;
575
576 if (!config->of_node)
577 return -ENODEV;
578
579 return 0;
580 }
581 #else
da9055_regulator_dt_init(struct platform_device * pdev,struct da9055_regulator * regulator,struct regulator_config * config,int regid)582 static inline int da9055_regulator_dt_init(struct platform_device *pdev,
583 struct da9055_regulator *regulator,
584 struct regulator_config *config,
585 int regid)
586 {
587 return -ENODEV;
588 }
589 #endif /* CONFIG_OF */
590
da9055_regulator_probe(struct platform_device * pdev)591 static int da9055_regulator_probe(struct platform_device *pdev)
592 {
593 struct regulator_config config = { };
594 struct da9055_regulator *regulator;
595 struct da9055 *da9055 = dev_get_drvdata(pdev->dev.parent);
596 struct da9055_pdata *pdata = dev_get_platdata(da9055->dev);
597 int ret, irq;
598
599 regulator = devm_kzalloc(&pdev->dev, sizeof(struct da9055_regulator),
600 GFP_KERNEL);
601 if (!regulator)
602 return -ENOMEM;
603
604 regulator->info = find_regulator_info(pdev->id);
605 if (regulator->info == NULL) {
606 dev_err(&pdev->dev, "invalid regulator ID specified\n");
607 return -EINVAL;
608 }
609
610 regulator->da9055 = da9055;
611 config.dev = &pdev->dev;
612 config.driver_data = regulator;
613 config.regmap = da9055->regmap;
614
615 if (pdata) {
616 config.init_data = pdata->regulators[pdev->id];
617 } else {
618 ret = da9055_regulator_dt_init(pdev, regulator, &config,
619 pdev->id);
620 if (ret < 0)
621 return ret;
622 }
623
624 ret = da9055_gpio_init(regulator, &config, pdata, pdev->id);
625 if (ret < 0)
626 return ret;
627
628 regulator->rdev = devm_regulator_register(&pdev->dev,
629 ®ulator->info->reg_desc,
630 &config);
631 if (IS_ERR(regulator->rdev)) {
632 dev_err(&pdev->dev, "Failed to register regulator %s\n",
633 regulator->info->reg_desc.name);
634 return PTR_ERR(regulator->rdev);
635 }
636
637 /* Only LDO 5 and 6 has got the over current interrupt */
638 if (pdev->id == DA9055_ID_LDO5 || pdev->id == DA9055_ID_LDO6) {
639 irq = platform_get_irq_byname(pdev, "REGULATOR");
640 if (irq < 0)
641 return irq;
642
643 ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
644 da9055_ldo5_6_oc_irq,
645 IRQF_TRIGGER_HIGH |
646 IRQF_ONESHOT |
647 IRQF_PROBE_SHARED,
648 pdev->name, regulator);
649 if (ret != 0) {
650 if (ret != -EBUSY) {
651 dev_err(&pdev->dev,
652 "Failed to request Regulator IRQ %d: %d\n",
653 irq, ret);
654 return ret;
655 }
656 }
657 }
658
659 platform_set_drvdata(pdev, regulator);
660
661 return 0;
662 }
663
664 static struct platform_driver da9055_regulator_driver = {
665 .probe = da9055_regulator_probe,
666 .driver = {
667 .name = "da9055-regulator",
668 },
669 };
670
da9055_regulator_init(void)671 static int __init da9055_regulator_init(void)
672 {
673 return platform_driver_register(&da9055_regulator_driver);
674 }
675 subsys_initcall(da9055_regulator_init);
676
da9055_regulator_exit(void)677 static void __exit da9055_regulator_exit(void)
678 {
679 platform_driver_unregister(&da9055_regulator_driver);
680 }
681 module_exit(da9055_regulator_exit);
682
683 MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
684 MODULE_DESCRIPTION("Power Regulator driver for Dialog DA9055 PMIC");
685 MODULE_LICENSE("GPL");
686 MODULE_ALIAS("platform:da9055-regulator");
687