1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 /* 3 * Copyright (c) 1999-2002 Vojtech Pavlik 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 as published by 7 * the Free Software Foundation. 8 */ 9 #ifndef _UAPI_INPUT_H 10 #define _UAPI_INPUT_H 11 12 13 #ifndef __KERNEL__ 14 #include <sys/time.h> 15 #include <sys/ioctl.h> 16 #include <sys/types.h> 17 #include <linux/types.h> 18 #endif 19 20 #include "input-event-codes.h" 21 22 /* 23 * The event structure itself 24 * Note that __USE_TIME_BITS64 is defined by libc based on 25 * application's request to use 64 bit time_t. 26 */ 27 28 struct input_event { 29 #if (__BITS_PER_LONG != 32 || !defined(__USE_TIME_BITS64)) && !defined(__KERNEL__) 30 struct timeval time; 31 #define input_event_sec time.tv_sec 32 #define input_event_usec time.tv_usec 33 #else 34 __kernel_ulong_t __sec; 35 #if defined(__sparc__) && defined(__arch64__) 36 unsigned int __usec; 37 unsigned int __pad; 38 #else 39 __kernel_ulong_t __usec; 40 #endif 41 #define input_event_sec __sec 42 #define input_event_usec __usec 43 #endif 44 __u16 type; 45 __u16 code; 46 __s32 value; 47 }; 48 49 /* 50 * Protocol version. 51 */ 52 53 #define EV_VERSION 0x010001 54 55 /* 56 * IOCTLs (0x00 - 0x7f) 57 */ 58 59 struct input_id { 60 __u16 bustype; 61 __u16 vendor; 62 __u16 product; 63 __u16 version; 64 }; 65 66 /** 67 * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls 68 * @value: latest reported value for the axis. 69 * @minimum: specifies minimum value for the axis. 70 * @maximum: specifies maximum value for the axis. 71 * @fuzz: specifies fuzz value that is used to filter noise from 72 * the event stream. 73 * @flat: values that are within this value will be discarded by 74 * joydev interface and reported as 0 instead. 75 * @resolution: specifies resolution for the values reported for 76 * the axis. 77 * 78 * Note that input core does not clamp reported values to the 79 * [minimum, maximum] limits, such task is left to userspace. 80 * 81 * The default resolution for main axes (ABS_X, ABS_Y, ABS_Z) 82 * is reported in units per millimeter (units/mm), resolution 83 * for rotational axes (ABS_RX, ABS_RY, ABS_RZ) is reported 84 * in units per radian. 85 * When INPUT_PROP_ACCELEROMETER is set the resolution changes. 86 * The main axes (ABS_X, ABS_Y, ABS_Z) are then reported in 87 * in units per g (units/g) and in units per degree per second 88 * (units/deg/s) for rotational axes (ABS_RX, ABS_RY, ABS_RZ). 89 */ 90 struct input_absinfo { 91 __s32 value; 92 __s32 minimum; 93 __s32 maximum; 94 __s32 fuzz; 95 __s32 flat; 96 __s32 resolution; 97 }; 98 99 /** 100 * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls 101 * @scancode: scancode represented in machine-endian form. 102 * @len: length of the scancode that resides in @scancode buffer. 103 * @index: index in the keymap, may be used instead of scancode 104 * @flags: allows to specify how kernel should handle the request. For 105 * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel 106 * should perform lookup in keymap by @index instead of @scancode 107 * @keycode: key code assigned to this scancode 108 * 109 * The structure is used to retrieve and modify keymap data. Users have 110 * option of performing lookup either by @scancode itself or by @index 111 * in keymap entry. EVIOCGKEYCODE will also return scancode or index 112 * (depending on which element was used to perform lookup). 113 */ 114 struct input_keymap_entry { 115 #define INPUT_KEYMAP_BY_INDEX (1 << 0) 116 __u8 flags; 117 __u8 len; 118 __u16 index; 119 __u32 keycode; 120 __u8 scancode[32]; 121 }; 122 123 struct input_mask { 124 __u32 type; 125 __u32 codes_size; 126 __u64 codes_ptr; 127 }; 128 129 #define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ 130 #define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ 131 #define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ 132 #define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ 133 134 #define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ 135 #define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry) 136 #define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ 137 #define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry) 138 139 #define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ 140 #define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ 141 #define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ 142 #define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ 143 144 /** 145 * EVIOCGMTSLOTS(len) - get MT slot values 146 * @len: size of the data buffer in bytes 147 * 148 * The ioctl buffer argument should be binary equivalent to 149 * 150 * struct input_mt_request_layout { 151 * __u32 code; 152 * __s32 values[num_slots]; 153 * }; 154 * 155 * where num_slots is the (arbitrary) number of MT slots to extract. 156 * 157 * The ioctl size argument (len) is the size of the buffer, which 158 * should satisfy len = (num_slots + 1) * sizeof(__s32). If len is 159 * too small to fit all available slots, the first num_slots are 160 * returned. 161 * 162 * Before the call, code is set to the wanted ABS_MT event type. On 163 * return, values[] is filled with the slot values for the specified 164 * ABS_MT code. 165 * 166 * If the request code is not an ABS_MT value, -EINVAL is returned. 167 */ 168 #define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len) 169 170 #define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ 171 #define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ 172 #define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ 173 #define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ 174 175 #define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */ 176 #define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */ 177 #define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */ 178 179 #define EVIOCSFF _IOW('E', 0x80, struct ff_effect) /* send a force effect to a force feedback device */ 180 #define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ 181 #define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ 182 183 #define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ 184 #define EVIOCREVOKE _IOW('E', 0x91, int) /* Revoke device access */ 185 186 /** 187 * EVIOCGMASK - Retrieve current event mask 188 * 189 * This ioctl allows user to retrieve the current event mask for specific 190 * event type. The argument must be of type "struct input_mask" and 191 * specifies the event type to query, the address of the receive buffer and 192 * the size of the receive buffer. 193 * 194 * The event mask is a per-client mask that specifies which events are 195 * forwarded to the client. Each event code is represented by a single bit 196 * in the event mask. If the bit is set, the event is passed to the client 197 * normally. Otherwise, the event is filtered and will never be queued on 198 * the client's receive buffer. 199 * 200 * Event masks do not affect global state of the input device. They only 201 * affect the file descriptor they are applied to. 202 * 203 * The default event mask for a client has all bits set, i.e. all events 204 * are forwarded to the client. If the kernel is queried for an unknown 205 * event type or if the receive buffer is larger than the number of 206 * event codes known to the kernel, the kernel returns all zeroes for those 207 * codes. 208 * 209 * At maximum, codes_size bytes are copied. 210 * 211 * This ioctl may fail with ENODEV in case the file is revoked, EFAULT 212 * if the receive-buffer points to invalid memory, or EINVAL if the kernel 213 * does not implement the ioctl. 214 */ 215 #define EVIOCGMASK _IOR('E', 0x92, struct input_mask) /* Get event-masks */ 216 217 /** 218 * EVIOCSMASK - Set event mask 219 * 220 * This ioctl is the counterpart to EVIOCGMASK. Instead of receiving the 221 * current event mask, this changes the client's event mask for a specific 222 * type. See EVIOCGMASK for a description of event-masks and the 223 * argument-type. 224 * 225 * This ioctl provides full forward compatibility. If the passed event type 226 * is unknown to the kernel, or if the number of event codes specified in 227 * the mask is bigger than what is known to the kernel, the ioctl is still 228 * accepted and applied. However, any unknown codes are left untouched and 229 * stay cleared. That means, the kernel always filters unknown codes 230 * regardless of what the client requests. If the new mask doesn't cover 231 * all known event-codes, all remaining codes are automatically cleared and 232 * thus filtered. 233 * 234 * This ioctl may fail with ENODEV in case the file is revoked. EFAULT is 235 * returned if the receive-buffer points to invalid memory. EINVAL is returned 236 * if the kernel does not implement the ioctl. 237 */ 238 #define EVIOCSMASK _IOW('E', 0x93, struct input_mask) /* Set event-masks */ 239 240 #define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */ 241 242 /* 243 * IDs. 244 */ 245 246 #define ID_BUS 0 247 #define ID_VENDOR 1 248 #define ID_PRODUCT 2 249 #define ID_VERSION 3 250 251 #define BUS_PCI 0x01 252 #define BUS_ISAPNP 0x02 253 #define BUS_USB 0x03 254 #define BUS_HIL 0x04 255 #define BUS_BLUETOOTH 0x05 256 #define BUS_VIRTUAL 0x06 257 258 #define BUS_ISA 0x10 259 #define BUS_I8042 0x11 260 #define BUS_XTKBD 0x12 261 #define BUS_RS232 0x13 262 #define BUS_GAMEPORT 0x14 263 #define BUS_PARPORT 0x15 264 #define BUS_AMIGA 0x16 265 #define BUS_ADB 0x17 266 #define BUS_I2C 0x18 267 #define BUS_HOST 0x19 268 #define BUS_GSC 0x1A 269 #define BUS_ATARI 0x1B 270 #define BUS_SPI 0x1C 271 #define BUS_RMI 0x1D 272 #define BUS_CEC 0x1E 273 #define BUS_INTEL_ISHTP 0x1F 274 275 /* 276 * MT_TOOL types 277 */ 278 #define MT_TOOL_FINGER 0x00 279 #define MT_TOOL_PEN 0x01 280 #define MT_TOOL_PALM 0x02 281 #define MT_TOOL_DIAL 0x0a 282 #define MT_TOOL_MAX 0x0f 283 284 /* 285 * Values describing the status of a force-feedback effect 286 */ 287 #define FF_STATUS_STOPPED 0x00 288 #define FF_STATUS_PLAYING 0x01 289 #define FF_STATUS_MAX 0x01 290 291 /* 292 * Structures used in ioctls to upload effects to a device 293 * They are pieces of a bigger structure (called ff_effect) 294 */ 295 296 /* 297 * All duration values are expressed in ms. Values above 32767 ms (0x7fff) 298 * should not be used and have unspecified results. 299 */ 300 301 /** 302 * struct ff_replay - defines scheduling of the force-feedback effect 303 * @length: duration of the effect 304 * @delay: delay before effect should start playing 305 */ 306 struct ff_replay { 307 __u16 length; 308 __u16 delay; 309 }; 310 311 /** 312 * struct ff_trigger - defines what triggers the force-feedback effect 313 * @button: number of the button triggering the effect 314 * @interval: controls how soon the effect can be re-triggered 315 */ 316 struct ff_trigger { 317 __u16 button; 318 __u16 interval; 319 }; 320 321 /** 322 * struct ff_envelope - generic force-feedback effect envelope 323 * @attack_length: duration of the attack (ms) 324 * @attack_level: level at the beginning of the attack 325 * @fade_length: duration of fade (ms) 326 * @fade_level: level at the end of fade 327 * 328 * The @attack_level and @fade_level are absolute values; when applying 329 * envelope force-feedback core will convert to positive/negative 330 * value based on polarity of the default level of the effect. 331 * Valid range for the attack and fade levels is 0x0000 - 0x7fff 332 */ 333 struct ff_envelope { 334 __u16 attack_length; 335 __u16 attack_level; 336 __u16 fade_length; 337 __u16 fade_level; 338 }; 339 340 /** 341 * struct ff_constant_effect - defines parameters of a constant force-feedback effect 342 * @level: strength of the effect; may be negative 343 * @envelope: envelope data 344 */ 345 struct ff_constant_effect { 346 __s16 level; 347 struct ff_envelope envelope; 348 }; 349 350 /** 351 * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect 352 * @start_level: beginning strength of the effect; may be negative 353 * @end_level: final strength of the effect; may be negative 354 * @envelope: envelope data 355 */ 356 struct ff_ramp_effect { 357 __s16 start_level; 358 __s16 end_level; 359 struct ff_envelope envelope; 360 }; 361 362 /** 363 * struct ff_condition_effect - defines a spring or friction force-feedback effect 364 * @right_saturation: maximum level when joystick moved all way to the right 365 * @left_saturation: same for the left side 366 * @right_coeff: controls how fast the force grows when the joystick moves 367 * to the right 368 * @left_coeff: same for the left side 369 * @deadband: size of the dead zone, where no force is produced 370 * @center: position of the dead zone 371 */ 372 struct ff_condition_effect { 373 __u16 right_saturation; 374 __u16 left_saturation; 375 376 __s16 right_coeff; 377 __s16 left_coeff; 378 379 __u16 deadband; 380 __s16 center; 381 }; 382 383 /** 384 * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect 385 * @waveform: kind of the effect (wave) 386 * @period: period of the wave (ms) 387 * @magnitude: peak value 388 * @offset: mean value of the wave (roughly) 389 * @phase: 'horizontal' shift 390 * @envelope: envelope data 391 * @custom_len: number of samples (FF_CUSTOM only) 392 * @custom_data: buffer of samples (FF_CUSTOM only) 393 * 394 * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, 395 * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined 396 * for the time being as no driver supports it yet. 397 * 398 * Note: the data pointed by custom_data is copied by the driver. 399 * You can therefore dispose of the memory after the upload/update. 400 */ 401 struct ff_periodic_effect { 402 __u16 waveform; 403 __u16 period; 404 __s16 magnitude; 405 __s16 offset; 406 __u16 phase; 407 408 struct ff_envelope envelope; 409 410 __u32 custom_len; 411 __s16 __user *custom_data; 412 }; 413 414 /** 415 * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect 416 * @strong_magnitude: magnitude of the heavy motor 417 * @weak_magnitude: magnitude of the light one 418 * 419 * Some rumble pads have two motors of different weight. Strong_magnitude 420 * represents the magnitude of the vibration generated by the heavy one. 421 */ 422 struct ff_rumble_effect { 423 __u16 strong_magnitude; 424 __u16 weak_magnitude; 425 }; 426 427 /** 428 * struct ff_effect - defines force feedback effect 429 * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING, 430 * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM) 431 * @id: an unique id assigned to an effect 432 * @direction: direction of the effect 433 * @trigger: trigger conditions (struct ff_trigger) 434 * @replay: scheduling of the effect (struct ff_replay) 435 * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect, 436 * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further 437 * defining effect parameters 438 * 439 * This structure is sent through ioctl from the application to the driver. 440 * To create a new effect application should set its @id to -1; the kernel 441 * will return assigned @id which can later be used to update or delete 442 * this effect. 443 * 444 * Direction of the effect is encoded as follows: 445 * 0 deg -> 0x0000 (down) 446 * 90 deg -> 0x4000 (left) 447 * 180 deg -> 0x8000 (up) 448 * 270 deg -> 0xC000 (right) 449 */ 450 struct ff_effect { 451 __u16 type; 452 __s16 id; 453 __u16 direction; 454 struct ff_trigger trigger; 455 struct ff_replay replay; 456 457 union { 458 struct ff_constant_effect constant; 459 struct ff_ramp_effect ramp; 460 struct ff_periodic_effect periodic; 461 struct ff_condition_effect condition[2]; /* One for each axis */ 462 struct ff_rumble_effect rumble; 463 } u; 464 }; 465 466 /* 467 * Force feedback effect types 468 */ 469 470 #define FF_RUMBLE 0x50 471 #define FF_PERIODIC 0x51 472 #define FF_CONSTANT 0x52 473 #define FF_SPRING 0x53 474 #define FF_FRICTION 0x54 475 #define FF_DAMPER 0x55 476 #define FF_INERTIA 0x56 477 #define FF_RAMP 0x57 478 479 #define FF_EFFECT_MIN FF_RUMBLE 480 #define FF_EFFECT_MAX FF_RAMP 481 482 /* 483 * Force feedback periodic effect types 484 */ 485 486 #define FF_SQUARE 0x58 487 #define FF_TRIANGLE 0x59 488 #define FF_SINE 0x5a 489 #define FF_SAW_UP 0x5b 490 #define FF_SAW_DOWN 0x5c 491 #define FF_CUSTOM 0x5d 492 493 #define FF_WAVEFORM_MIN FF_SQUARE 494 #define FF_WAVEFORM_MAX FF_CUSTOM 495 496 /* 497 * Set ff device properties 498 */ 499 500 #define FF_GAIN 0x60 501 #define FF_AUTOCENTER 0x61 502 503 /* 504 * ff->playback(effect_id = FF_GAIN) is the first effect_id to 505 * cause a collision with another ff method, in this case ff->set_gain(). 506 * Therefore the greatest safe value for effect_id is FF_GAIN - 1, 507 * and thus the total number of effects should never exceed FF_GAIN. 508 */ 509 #define FF_MAX_EFFECTS FF_GAIN 510 511 #define FF_MAX 0x7f 512 #define FF_CNT (FF_MAX+1) 513 514 #endif /* _UAPI_INPUT_H */ 515