1 /*
2 * Xilinx Zynq Ultrascale+ MPSoC Real Time Clock Driver
3 *
4 * Copyright (C) 2015 Xilinx, Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
9 *
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * more details.
14 *
15 * You should have received a copy of the GNU General Public License along with
16 * this program. If not, see <http://www.gnu.org/licenses/>.
17 *
18 */
19
20 #include <linux/delay.h>
21 #include <linux/init.h>
22 #include <linux/io.h>
23 #include <linux/module.h>
24 #include <linux/of.h>
25 #include <linux/platform_device.h>
26 #include <linux/rtc.h>
27
28 /* RTC Registers */
29 #define RTC_SET_TM_WR 0x00
30 #define RTC_SET_TM_RD 0x04
31 #define RTC_CALIB_WR 0x08
32 #define RTC_CALIB_RD 0x0C
33 #define RTC_CUR_TM 0x10
34 #define RTC_CUR_TICK 0x14
35 #define RTC_ALRM 0x18
36 #define RTC_INT_STS 0x20
37 #define RTC_INT_MASK 0x24
38 #define RTC_INT_EN 0x28
39 #define RTC_INT_DIS 0x2C
40 #define RTC_CTRL 0x40
41
42 #define RTC_FR_EN BIT(20)
43 #define RTC_FR_DATSHIFT 16
44 #define RTC_TICK_MASK 0xFFFF
45 #define RTC_INT_SEC BIT(0)
46 #define RTC_INT_ALRM BIT(1)
47 #define RTC_OSC_EN BIT(24)
48 #define RTC_BATT_EN BIT(31)
49
50 #define RTC_CALIB_DEF 0x198233
51 #define RTC_CALIB_MASK 0x1FFFFF
52 #define RTC_SEC_MAX_VAL 0xFFFFFFFF
53
54 struct xlnx_rtc_dev {
55 struct rtc_device *rtc;
56 void __iomem *reg_base;
57 int alarm_irq;
58 int sec_irq;
59 int calibval;
60 };
61
xlnx_rtc_set_time(struct device * dev,struct rtc_time * tm)62 static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
63 {
64 struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
65 unsigned long new_time;
66
67 /*
68 * The value written will be updated after 1 sec into the
69 * seconds read register, so we need to program time +1 sec
70 * to get the correct time on read.
71 */
72 new_time = rtc_tm_to_time64(tm) + 1;
73
74 if (new_time > RTC_SEC_MAX_VAL)
75 return -EINVAL;
76
77 /*
78 * Writing into calibration register will clear the Tick Counter and
79 * force the next second to be signaled exactly in 1 second period
80 */
81 xrtcdev->calibval &= RTC_CALIB_MASK;
82 writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
83
84 writel(new_time, xrtcdev->reg_base + RTC_SET_TM_WR);
85
86 /*
87 * Clear the rtc interrupt status register after setting the
88 * time. During a read_time function, the code should read the
89 * RTC_INT_STATUS register and if bit 0 is still 0, it means
90 * that one second has not elapsed yet since RTC was set and
91 * the current time should be read from SET_TIME_READ register;
92 * otherwise, CURRENT_TIME register is read to report the time
93 */
94 writel(RTC_INT_SEC, xrtcdev->reg_base + RTC_INT_STS);
95
96 return 0;
97 }
98
xlnx_rtc_read_time(struct device * dev,struct rtc_time * tm)99 static int xlnx_rtc_read_time(struct device *dev, struct rtc_time *tm)
100 {
101 u32 status;
102 unsigned long read_time;
103 struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
104
105 status = readl(xrtcdev->reg_base + RTC_INT_STS);
106
107 if (status & RTC_INT_SEC) {
108 /*
109 * RTC has updated the CURRENT_TIME with the time written into
110 * SET_TIME_WRITE register.
111 */
112 rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_CUR_TM), tm);
113 } else {
114 /*
115 * Time written in SET_TIME_WRITE has not yet updated into
116 * the seconds read register, so read the time from the
117 * SET_TIME_WRITE instead of CURRENT_TIME register.
118 * Since we add +1 sec while writing, we need to -1 sec while
119 * reading.
120 */
121 read_time = readl(xrtcdev->reg_base + RTC_SET_TM_RD) - 1;
122 rtc_time64_to_tm(read_time, tm);
123 }
124
125 return 0;
126 }
127
xlnx_rtc_read_alarm(struct device * dev,struct rtc_wkalrm * alrm)128 static int xlnx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
129 {
130 struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
131
132 rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_ALRM), &alrm->time);
133 alrm->enabled = readl(xrtcdev->reg_base + RTC_INT_MASK) & RTC_INT_ALRM;
134
135 return 0;
136 }
137
xlnx_rtc_alarm_irq_enable(struct device * dev,u32 enabled)138 static int xlnx_rtc_alarm_irq_enable(struct device *dev, u32 enabled)
139 {
140 struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
141
142 if (enabled)
143 writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_EN);
144 else
145 writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_DIS);
146
147 return 0;
148 }
149
xlnx_rtc_set_alarm(struct device * dev,struct rtc_wkalrm * alrm)150 static int xlnx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
151 {
152 struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
153 unsigned long alarm_time;
154
155 alarm_time = rtc_tm_to_time64(&alrm->time);
156
157 if (alarm_time > RTC_SEC_MAX_VAL)
158 return -EINVAL;
159
160 writel((u32)alarm_time, (xrtcdev->reg_base + RTC_ALRM));
161
162 xlnx_rtc_alarm_irq_enable(dev, alrm->enabled);
163
164 return 0;
165 }
166
xlnx_init_rtc(struct xlnx_rtc_dev * xrtcdev)167 static void xlnx_init_rtc(struct xlnx_rtc_dev *xrtcdev)
168 {
169 u32 rtc_ctrl;
170
171 /* Enable RTC switch to battery when VCC_PSAUX is not available */
172 rtc_ctrl = readl(xrtcdev->reg_base + RTC_CTRL);
173 rtc_ctrl |= RTC_BATT_EN;
174 writel(rtc_ctrl, xrtcdev->reg_base + RTC_CTRL);
175
176 /*
177 * Based on crystal freq of 33.330 KHz
178 * set the seconds counter and enable, set fractions counter
179 * to default value suggested as per design spec
180 * to correct RTC delay in frequency over period of time.
181 */
182 xrtcdev->calibval &= RTC_CALIB_MASK;
183 writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
184 }
185
186 static const struct rtc_class_ops xlnx_rtc_ops = {
187 .set_time = xlnx_rtc_set_time,
188 .read_time = xlnx_rtc_read_time,
189 .read_alarm = xlnx_rtc_read_alarm,
190 .set_alarm = xlnx_rtc_set_alarm,
191 .alarm_irq_enable = xlnx_rtc_alarm_irq_enable,
192 };
193
xlnx_rtc_interrupt(int irq,void * id)194 static irqreturn_t xlnx_rtc_interrupt(int irq, void *id)
195 {
196 struct xlnx_rtc_dev *xrtcdev = (struct xlnx_rtc_dev *)id;
197 unsigned int status;
198
199 status = readl(xrtcdev->reg_base + RTC_INT_STS);
200 /* Check if interrupt asserted */
201 if (!(status & (RTC_INT_SEC | RTC_INT_ALRM)))
202 return IRQ_NONE;
203
204 /* Clear RTC_INT_ALRM interrupt only */
205 writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_STS);
206
207 if (status & RTC_INT_ALRM)
208 rtc_update_irq(xrtcdev->rtc, 1, RTC_IRQF | RTC_AF);
209
210 return IRQ_HANDLED;
211 }
212
xlnx_rtc_probe(struct platform_device * pdev)213 static int xlnx_rtc_probe(struct platform_device *pdev)
214 {
215 struct xlnx_rtc_dev *xrtcdev;
216 struct resource *res;
217 int ret;
218
219 xrtcdev = devm_kzalloc(&pdev->dev, sizeof(*xrtcdev), GFP_KERNEL);
220 if (!xrtcdev)
221 return -ENOMEM;
222
223 platform_set_drvdata(pdev, xrtcdev);
224
225 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
226
227 xrtcdev->reg_base = devm_ioremap_resource(&pdev->dev, res);
228 if (IS_ERR(xrtcdev->reg_base))
229 return PTR_ERR(xrtcdev->reg_base);
230
231 xrtcdev->alarm_irq = platform_get_irq_byname(pdev, "alarm");
232 if (xrtcdev->alarm_irq < 0) {
233 dev_err(&pdev->dev, "no irq resource\n");
234 return xrtcdev->alarm_irq;
235 }
236 ret = devm_request_irq(&pdev->dev, xrtcdev->alarm_irq,
237 xlnx_rtc_interrupt, 0,
238 dev_name(&pdev->dev), xrtcdev);
239 if (ret) {
240 dev_err(&pdev->dev, "request irq failed\n");
241 return ret;
242 }
243
244 xrtcdev->sec_irq = platform_get_irq_byname(pdev, "sec");
245 if (xrtcdev->sec_irq < 0) {
246 dev_err(&pdev->dev, "no irq resource\n");
247 return xrtcdev->sec_irq;
248 }
249 ret = devm_request_irq(&pdev->dev, xrtcdev->sec_irq,
250 xlnx_rtc_interrupt, 0,
251 dev_name(&pdev->dev), xrtcdev);
252 if (ret) {
253 dev_err(&pdev->dev, "request irq failed\n");
254 return ret;
255 }
256
257 ret = of_property_read_u32(pdev->dev.of_node, "calibration",
258 &xrtcdev->calibval);
259 if (ret)
260 xrtcdev->calibval = RTC_CALIB_DEF;
261
262 xlnx_init_rtc(xrtcdev);
263
264 device_init_wakeup(&pdev->dev, 1);
265
266 xrtcdev->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
267 &xlnx_rtc_ops, THIS_MODULE);
268 return PTR_ERR_OR_ZERO(xrtcdev->rtc);
269 }
270
xlnx_rtc_remove(struct platform_device * pdev)271 static int xlnx_rtc_remove(struct platform_device *pdev)
272 {
273 xlnx_rtc_alarm_irq_enable(&pdev->dev, 0);
274 device_init_wakeup(&pdev->dev, 0);
275
276 return 0;
277 }
278
xlnx_rtc_suspend(struct device * dev)279 static int __maybe_unused xlnx_rtc_suspend(struct device *dev)
280 {
281 struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
282
283 if (device_may_wakeup(dev))
284 enable_irq_wake(xrtcdev->alarm_irq);
285 else
286 xlnx_rtc_alarm_irq_enable(dev, 0);
287
288 return 0;
289 }
290
xlnx_rtc_resume(struct device * dev)291 static int __maybe_unused xlnx_rtc_resume(struct device *dev)
292 {
293 struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
294
295 if (device_may_wakeup(dev))
296 disable_irq_wake(xrtcdev->alarm_irq);
297 else
298 xlnx_rtc_alarm_irq_enable(dev, 1);
299
300 return 0;
301 }
302
303 static SIMPLE_DEV_PM_OPS(xlnx_rtc_pm_ops, xlnx_rtc_suspend, xlnx_rtc_resume);
304
305 static const struct of_device_id xlnx_rtc_of_match[] = {
306 {.compatible = "xlnx,zynqmp-rtc" },
307 { }
308 };
309 MODULE_DEVICE_TABLE(of, xlnx_rtc_of_match);
310
311 static struct platform_driver xlnx_rtc_driver = {
312 .probe = xlnx_rtc_probe,
313 .remove = xlnx_rtc_remove,
314 .driver = {
315 .name = KBUILD_MODNAME,
316 .pm = &xlnx_rtc_pm_ops,
317 .of_match_table = xlnx_rtc_of_match,
318 },
319 };
320
321 module_platform_driver(xlnx_rtc_driver);
322
323 MODULE_DESCRIPTION("Xilinx Zynq MPSoC RTC driver");
324 MODULE_AUTHOR("Xilinx Inc.");
325 MODULE_LICENSE("GPL v2");
326