1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 /* 3 * This file define a set of standard wireless extensions 4 * 5 * Version : 22 16.3.07 6 * 7 * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> 8 * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved. 9 */ 10 11 #ifndef _UAPI_LINUX_WIRELESS_H 12 #define _UAPI_LINUX_WIRELESS_H 13 14 /************************** DOCUMENTATION **************************/ 15 /* 16 * Initial APIs (1996 -> onward) : 17 * ----------------------------- 18 * Basically, the wireless extensions are for now a set of standard ioctl 19 * call + /proc/net/wireless 20 * 21 * The entry /proc/net/wireless give statistics and information on the 22 * driver. 23 * This is better than having each driver having its entry because 24 * its centralised and we may remove the driver module safely. 25 * 26 * Ioctl are used to configure the driver and issue commands. This is 27 * better than command line options of insmod because we may want to 28 * change dynamically (while the driver is running) some parameters. 29 * 30 * The ioctl mechanimsm are copied from standard devices ioctl. 31 * We have the list of command plus a structure descibing the 32 * data exchanged... 33 * Note that to add these ioctl, I was obliged to modify : 34 * # net/core/dev.c (two place + add include) 35 * # net/ipv4/af_inet.c (one place + add include) 36 * 37 * /proc/net/wireless is a copy of /proc/net/dev. 38 * We have a structure for data passed from the driver to /proc/net/wireless 39 * Too add this, I've modified : 40 * # net/core/dev.c (two other places) 41 * # include/linux/netdevice.h (one place) 42 * # include/linux/proc_fs.h (one place) 43 * 44 * New driver API (2002 -> onward) : 45 * ------------------------------- 46 * This file is only concerned with the user space API and common definitions. 47 * The new driver API is defined and documented in : 48 * # include/net/iw_handler.h 49 * 50 * Note as well that /proc/net/wireless implementation has now moved in : 51 * # net/core/wireless.c 52 * 53 * Wireless Events (2002 -> onward) : 54 * -------------------------------- 55 * Events are defined at the end of this file, and implemented in : 56 * # net/core/wireless.c 57 * 58 * Other comments : 59 * -------------- 60 * Do not add here things that are redundant with other mechanisms 61 * (drivers init, ifconfig, /proc/net/dev, ...) and with are not 62 * wireless specific. 63 * 64 * These wireless extensions are not magic : each driver has to provide 65 * support for them... 66 * 67 * IMPORTANT NOTE : As everything in the kernel, this is very much a 68 * work in progress. Contact me if you have ideas of improvements... 69 */ 70 71 /***************************** INCLUDES *****************************/ 72 73 #include <linux/types.h> /* for __u* and __s* typedefs */ 74 #include <linux/socket.h> /* for "struct sockaddr" et al */ 75 #include <linux/if.h> /* for IFNAMSIZ and co... */ 76 77 #ifdef __KERNEL__ 78 # include <linux/stddef.h> /* for offsetof */ 79 #else 80 # include <stddef.h> /* for offsetof */ 81 #endif 82 83 /***************************** VERSION *****************************/ 84 /* 85 * This constant is used to know the availability of the wireless 86 * extensions and to know which version of wireless extensions it is 87 * (there is some stuff that will be added in the future...) 88 * I just plan to increment with each new version. 89 */ 90 #define WIRELESS_EXT 22 91 92 /* 93 * Changes : 94 * 95 * V2 to V3 96 * -------- 97 * Alan Cox start some incompatibles changes. I've integrated a bit more. 98 * - Encryption renamed to Encode to avoid US regulation problems 99 * - Frequency changed from float to struct to avoid problems on old 386 100 * 101 * V3 to V4 102 * -------- 103 * - Add sensitivity 104 * 105 * V4 to V5 106 * -------- 107 * - Missing encoding definitions in range 108 * - Access points stuff 109 * 110 * V5 to V6 111 * -------- 112 * - 802.11 support (ESSID ioctls) 113 * 114 * V6 to V7 115 * -------- 116 * - define IW_ESSID_MAX_SIZE and IW_MAX_AP 117 * 118 * V7 to V8 119 * -------- 120 * - Changed my e-mail address 121 * - More 802.11 support (nickname, rate, rts, frag) 122 * - List index in frequencies 123 * 124 * V8 to V9 125 * -------- 126 * - Support for 'mode of operation' (ad-hoc, managed...) 127 * - Support for unicast and multicast power saving 128 * - Change encoding to support larger tokens (>64 bits) 129 * - Updated iw_params (disable, flags) and use it for NWID 130 * - Extracted iw_point from iwreq for clarity 131 * 132 * V9 to V10 133 * --------- 134 * - Add PM capability to range structure 135 * - Add PM modifier : MAX/MIN/RELATIVE 136 * - Add encoding option : IW_ENCODE_NOKEY 137 * - Add TxPower ioctls (work like TxRate) 138 * 139 * V10 to V11 140 * ---------- 141 * - Add WE version in range (help backward/forward compatibility) 142 * - Add retry ioctls (work like PM) 143 * 144 * V11 to V12 145 * ---------- 146 * - Add SIOCSIWSTATS to get /proc/net/wireless programatically 147 * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space 148 * - Add new statistics (frag, retry, beacon) 149 * - Add average quality (for user space calibration) 150 * 151 * V12 to V13 152 * ---------- 153 * - Document creation of new driver API. 154 * - Extract union iwreq_data from struct iwreq (for new driver API). 155 * - Rename SIOCSIWNAME as SIOCSIWCOMMIT 156 * 157 * V13 to V14 158 * ---------- 159 * - Wireless Events support : define struct iw_event 160 * - Define additional specific event numbers 161 * - Add "addr" and "param" fields in union iwreq_data 162 * - AP scanning stuff (SIOCSIWSCAN and friends) 163 * 164 * V14 to V15 165 * ---------- 166 * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg 167 * - Make struct iw_freq signed (both m & e), add explicit padding 168 * - Add IWEVCUSTOM for driver specific event/scanning token 169 * - Add IW_MAX_GET_SPY for driver returning a lot of addresses 170 * - Add IW_TXPOW_RANGE for range of Tx Powers 171 * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points 172 * - Add IW_MODE_MONITOR for passive monitor 173 * 174 * V15 to V16 175 * ---------- 176 * - Increase the number of bitrates in iw_range to 32 (for 802.11g) 177 * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) 178 * - Reshuffle struct iw_range for increases, add filler 179 * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses 180 * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support 181 * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" 182 * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index 183 * 184 * V16 to V17 185 * ---------- 186 * - Add flags to frequency -> auto/fixed 187 * - Document (struct iw_quality *)->updated, add new flags (INVALID) 188 * - Wireless Event capability in struct iw_range 189 * - Add support for relative TxPower (yick !) 190 * 191 * V17 to V18 (From Jouni Malinen <j@w1.fi>) 192 * ---------- 193 * - Add support for WPA/WPA2 194 * - Add extended encoding configuration (SIOCSIWENCODEEXT and 195 * SIOCGIWENCODEEXT) 196 * - Add SIOCSIWGENIE/SIOCGIWGENIE 197 * - Add SIOCSIWMLME 198 * - Add SIOCSIWPMKSA 199 * - Add struct iw_range bit field for supported encoding capabilities 200 * - Add optional scan request parameters for SIOCSIWSCAN 201 * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA 202 * related parameters (extensible up to 4096 parameter values) 203 * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, 204 * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND 205 * 206 * V18 to V19 207 * ---------- 208 * - Remove (struct iw_point *)->pointer from events and streams 209 * - Remove header includes to help user space 210 * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64 211 * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros 212 * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM 213 * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros 214 * 215 * V19 to V20 216 * ---------- 217 * - RtNetlink requests support (SET/GET) 218 * 219 * V20 to V21 220 * ---------- 221 * - Remove (struct net_device *)->get_wireless_stats() 222 * - Change length in ESSID and NICK to strlen() instead of strlen()+1 223 * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers 224 * - Power/Retry relative values no longer * 100000 225 * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI 226 * 227 * V21 to V22 228 * ---------- 229 * - Prevent leaking of kernel space in stream on 64 bits. 230 */ 231 232 /**************************** CONSTANTS ****************************/ 233 234 /* -------------------------- IOCTL LIST -------------------------- */ 235 236 /* Wireless Identification */ 237 #define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ 238 #define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ 239 /* SIOCGIWNAME is used to verify the presence of Wireless Extensions. 240 * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... 241 * Don't put the name of your driver there, it's useless. */ 242 243 /* Basic operations */ 244 #define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ 245 #define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ 246 #define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ 247 #define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ 248 #define SIOCSIWMODE 0x8B06 /* set operation mode */ 249 #define SIOCGIWMODE 0x8B07 /* get operation mode */ 250 #define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ 251 #define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ 252 253 /* Informative stuff */ 254 #define SIOCSIWRANGE 0x8B0A /* Unused */ 255 #define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ 256 #define SIOCSIWPRIV 0x8B0C /* Unused */ 257 #define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ 258 #define SIOCSIWSTATS 0x8B0E /* Unused */ 259 #define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ 260 /* SIOCGIWSTATS is strictly used between user space and the kernel, and 261 * is never passed to the driver (i.e. the driver will never see it). */ 262 263 /* Spy support (statistics per MAC address - used for Mobile IP support) */ 264 #define SIOCSIWSPY 0x8B10 /* set spy addresses */ 265 #define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ 266 #define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ 267 #define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ 268 269 /* Access Point manipulation */ 270 #define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ 271 #define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ 272 #define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ 273 #define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ 274 #define SIOCGIWSCAN 0x8B19 /* get scanning results */ 275 276 /* 802.11 specific support */ 277 #define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ 278 #define SIOCGIWESSID 0x8B1B /* get ESSID */ 279 #define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ 280 #define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ 281 /* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit 282 * within the 'iwreq' structure, so we need to use the 'data' member to 283 * point to a string in user space, like it is done for RANGE... */ 284 285 /* Other parameters useful in 802.11 and some other devices */ 286 #define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ 287 #define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ 288 #define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ 289 #define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ 290 #define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ 291 #define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ 292 #define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ 293 #define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ 294 #define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ 295 #define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ 296 297 /* Encoding stuff (scrambling, hardware security, WEP...) */ 298 #define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ 299 #define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ 300 /* Power saving stuff (power management, unicast and multicast) */ 301 #define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ 302 #define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ 303 304 /* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). 305 * This ioctl uses struct iw_point and data buffer that includes IE id and len 306 * fields. More than one IE may be included in the request. Setting the generic 307 * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers 308 * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers 309 * are required to report the used IE as a wireless event, e.g., when 310 * associating with an AP. */ 311 #define SIOCSIWGENIE 0x8B30 /* set generic IE */ 312 #define SIOCGIWGENIE 0x8B31 /* get generic IE */ 313 314 /* WPA : IEEE 802.11 MLME requests */ 315 #define SIOCSIWMLME 0x8B16 /* request MLME operation; uses 316 * struct iw_mlme */ 317 /* WPA : Authentication mode parameters */ 318 #define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ 319 #define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ 320 321 /* WPA : Extended version of encoding configuration */ 322 #define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ 323 #define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ 324 325 /* WPA2 : PMKSA cache management */ 326 #define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ 327 328 /* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ 329 330 /* These 32 ioctl are wireless device private, for 16 commands. 331 * Each driver is free to use them for whatever purpose it chooses, 332 * however the driver *must* export the description of those ioctls 333 * with SIOCGIWPRIV and *must* use arguments as defined below. 334 * If you don't follow those rules, DaveM is going to hate you (reason : 335 * it make mixed 32/64bit operation impossible). 336 */ 337 #define SIOCIWFIRSTPRIV 0x8BE0 338 #define SIOCIWLASTPRIV 0x8BFF 339 /* Previously, we were using SIOCDEVPRIVATE, but we now have our 340 * separate range because of collisions with other tools such as 341 * 'mii-tool'. 342 * We now have 32 commands, so a bit more space ;-). 343 * Also, all 'even' commands are only usable by root and don't return the 344 * content of ifr/iwr to user (but you are not obliged to use the set/get 345 * convention, just use every other two command). More details in iwpriv.c. 346 * And I repeat : you are not forced to use them with iwpriv, but you 347 * must be compliant with it. 348 */ 349 350 /* ------------------------- IOCTL STUFF ------------------------- */ 351 352 /* The first and the last (range) */ 353 #define SIOCIWFIRST 0x8B00 354 #define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ 355 #define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST) 356 #define IW_HANDLER(id, func) \ 357 [IW_IOCTL_IDX(id)] = func 358 359 /* Odd : get (world access), even : set (root access) */ 360 #define IW_IS_SET(cmd) (!((cmd) & 0x1)) 361 #define IW_IS_GET(cmd) ((cmd) & 0x1) 362 363 /* ----------------------- WIRELESS EVENTS ----------------------- */ 364 /* Those are *NOT* ioctls, do not issue request on them !!! */ 365 /* Most events use the same identifier as ioctl requests */ 366 367 #define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ 368 #define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ 369 #define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ 370 #define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ 371 #define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ 372 #define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) 373 * (scan results); This includes id and 374 * length fields. One IWEVGENIE may 375 * contain more than one IE. Scan 376 * results may contain one or more 377 * IWEVGENIE events. */ 378 #define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure 379 * (struct iw_michaelmicfailure) 380 */ 381 #define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. 382 * The data includes id and length 383 * fields and may contain more than one 384 * IE. This event is required in 385 * Managed mode if the driver 386 * generates its own WPA/RSN IE. This 387 * should be sent just before 388 * IWEVREGISTERED event for the 389 * association. */ 390 #define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association 391 * Response. The data includes id and 392 * length fields and may contain more 393 * than one IE. This may be sent 394 * between IWEVASSOCREQIE and 395 * IWEVREGISTERED events for the 396 * association. */ 397 #define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN 398 * pre-authentication 399 * (struct iw_pmkid_cand) */ 400 401 #define IWEVFIRST 0x8C00 402 #define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST) 403 404 /* ------------------------- PRIVATE INFO ------------------------- */ 405 /* 406 * The following is used with SIOCGIWPRIV. It allow a driver to define 407 * the interface (name, type of data) for its private ioctl. 408 * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV 409 */ 410 411 #define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ 412 #define IW_PRIV_TYPE_NONE 0x0000 413 #define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ 414 #define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ 415 #define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ 416 #define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ 417 #define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ 418 419 #define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ 420 421 #define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ 422 423 /* 424 * Note : if the number of args is fixed and the size < 16 octets, 425 * instead of passing a pointer we will put args in the iwreq struct... 426 */ 427 428 /* ----------------------- OTHER CONSTANTS ----------------------- */ 429 430 /* Maximum frequencies in the range struct */ 431 #define IW_MAX_FREQUENCIES 32 432 /* Note : if you have something like 80 frequencies, 433 * don't increase this constant and don't fill the frequency list. 434 * The user will be able to set by channel anyway... */ 435 436 /* Maximum bit rates in the range struct */ 437 #define IW_MAX_BITRATES 32 438 439 /* Maximum tx powers in the range struct */ 440 #define IW_MAX_TXPOWER 8 441 /* Note : if you more than 8 TXPowers, just set the max and min or 442 * a few of them in the struct iw_range. */ 443 444 /* Maximum of address that you may set with SPY */ 445 #define IW_MAX_SPY 8 446 447 /* Maximum of address that you may get in the 448 list of access points in range */ 449 #define IW_MAX_AP 64 450 451 /* Maximum size of the ESSID and NICKN strings */ 452 #define IW_ESSID_MAX_SIZE 32 453 454 /* Modes of operation */ 455 #define IW_MODE_AUTO 0 /* Let the driver decides */ 456 #define IW_MODE_ADHOC 1 /* Single cell network */ 457 #define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ 458 #define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ 459 #define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ 460 #define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ 461 #define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ 462 #define IW_MODE_MESH 7 /* Mesh (IEEE 802.11s) network */ 463 464 /* Statistics flags (bitmask in updated) */ 465 #define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ 466 #define IW_QUAL_LEVEL_UPDATED 0x02 467 #define IW_QUAL_NOISE_UPDATED 0x04 468 #define IW_QUAL_ALL_UPDATED 0x07 469 #define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */ 470 #define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ 471 #define IW_QUAL_LEVEL_INVALID 0x20 472 #define IW_QUAL_NOISE_INVALID 0x40 473 #define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */ 474 #define IW_QUAL_ALL_INVALID 0x70 475 476 /* Frequency flags */ 477 #define IW_FREQ_AUTO 0x00 /* Let the driver decides */ 478 #define IW_FREQ_FIXED 0x01 /* Force a specific value */ 479 480 /* Maximum number of size of encoding token available 481 * they are listed in the range structure */ 482 #define IW_MAX_ENCODING_SIZES 8 483 484 /* Maximum size of the encoding token in bytes */ 485 #define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */ 486 487 /* Flags for encoding (along with the token) */ 488 #define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ 489 #define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ 490 #define IW_ENCODE_MODE 0xF000 /* Modes defined below */ 491 #define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ 492 #define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ 493 #define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ 494 #define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ 495 #define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ 496 #define IW_ENCODE_TEMP 0x0400 /* Temporary key */ 497 498 /* Power management flags available (along with the value, if any) */ 499 #define IW_POWER_ON 0x0000 /* No details... */ 500 #define IW_POWER_TYPE 0xF000 /* Type of parameter */ 501 #define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ 502 #define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ 503 #define IW_POWER_MODE 0x0F00 /* Power Management mode */ 504 #define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ 505 #define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ 506 #define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ 507 #define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ 508 #define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ 509 #define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ 510 #define IW_POWER_MIN 0x0001 /* Value is a minimum */ 511 #define IW_POWER_MAX 0x0002 /* Value is a maximum */ 512 #define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ 513 514 /* Transmit Power flags available */ 515 #define IW_TXPOW_TYPE 0x00FF /* Type of value */ 516 #define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ 517 #define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ 518 #define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */ 519 #define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ 520 521 /* Retry limits and lifetime flags available */ 522 #define IW_RETRY_ON 0x0000 /* No details... */ 523 #define IW_RETRY_TYPE 0xF000 /* Type of parameter */ 524 #define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ 525 #define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ 526 #define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */ 527 #define IW_RETRY_MIN 0x0001 /* Value is a minimum */ 528 #define IW_RETRY_MAX 0x0002 /* Value is a maximum */ 529 #define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ 530 #define IW_RETRY_SHORT 0x0010 /* Value is for short packets */ 531 #define IW_RETRY_LONG 0x0020 /* Value is for long packets */ 532 533 /* Scanning request flags */ 534 #define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ 535 #define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ 536 #define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ 537 #define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ 538 #define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ 539 #define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ 540 #define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ 541 #define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ 542 #define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ 543 /* struct iw_scan_req scan_type */ 544 #define IW_SCAN_TYPE_ACTIVE 0 545 #define IW_SCAN_TYPE_PASSIVE 1 546 /* Maximum size of returned data */ 547 #define IW_SCAN_MAX_DATA 4096 /* In bytes */ 548 549 /* Scan capability flags - in (struct iw_range *)->scan_capa */ 550 #define IW_SCAN_CAPA_NONE 0x00 551 #define IW_SCAN_CAPA_ESSID 0x01 552 #define IW_SCAN_CAPA_BSSID 0x02 553 #define IW_SCAN_CAPA_CHANNEL 0x04 554 #define IW_SCAN_CAPA_MODE 0x08 555 #define IW_SCAN_CAPA_RATE 0x10 556 #define IW_SCAN_CAPA_TYPE 0x20 557 #define IW_SCAN_CAPA_TIME 0x40 558 559 /* Max number of char in custom event - use multiple of them if needed */ 560 #define IW_CUSTOM_MAX 256 /* In bytes */ 561 562 /* Generic information element */ 563 #define IW_GENERIC_IE_MAX 1024 564 565 /* MLME requests (SIOCSIWMLME / struct iw_mlme) */ 566 #define IW_MLME_DEAUTH 0 567 #define IW_MLME_DISASSOC 1 568 #define IW_MLME_AUTH 2 569 #define IW_MLME_ASSOC 3 570 571 /* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ 572 #define IW_AUTH_INDEX 0x0FFF 573 #define IW_AUTH_FLAGS 0xF000 574 /* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) 575 * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the 576 * parameter that is being set/get to; value will be read/written to 577 * struct iw_param value field) */ 578 #define IW_AUTH_WPA_VERSION 0 579 #define IW_AUTH_CIPHER_PAIRWISE 1 580 #define IW_AUTH_CIPHER_GROUP 2 581 #define IW_AUTH_KEY_MGMT 3 582 #define IW_AUTH_TKIP_COUNTERMEASURES 4 583 #define IW_AUTH_DROP_UNENCRYPTED 5 584 #define IW_AUTH_80211_AUTH_ALG 6 585 #define IW_AUTH_WPA_ENABLED 7 586 #define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 587 #define IW_AUTH_ROAMING_CONTROL 9 588 #define IW_AUTH_PRIVACY_INVOKED 10 589 #define IW_AUTH_CIPHER_GROUP_MGMT 11 590 #define IW_AUTH_MFP 12 591 592 /* IW_AUTH_WPA_VERSION values (bit field) */ 593 #define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 594 #define IW_AUTH_WPA_VERSION_WPA 0x00000002 595 #define IW_AUTH_WPA_VERSION_WPA2 0x00000004 596 597 /* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT 598 * values (bit field) */ 599 #define IW_AUTH_CIPHER_NONE 0x00000001 600 #define IW_AUTH_CIPHER_WEP40 0x00000002 601 #define IW_AUTH_CIPHER_TKIP 0x00000004 602 #define IW_AUTH_CIPHER_CCMP 0x00000008 603 #define IW_AUTH_CIPHER_WEP104 0x00000010 604 #define IW_AUTH_CIPHER_AES_CMAC 0x00000020 605 606 /* IW_AUTH_KEY_MGMT values (bit field) */ 607 #define IW_AUTH_KEY_MGMT_802_1X 1 608 #define IW_AUTH_KEY_MGMT_PSK 2 609 610 /* IW_AUTH_80211_AUTH_ALG values (bit field) */ 611 #define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 612 #define IW_AUTH_ALG_SHARED_KEY 0x00000002 613 #define IW_AUTH_ALG_LEAP 0x00000004 614 615 /* IW_AUTH_ROAMING_CONTROL values */ 616 #define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ 617 #define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming 618 * control */ 619 620 /* IW_AUTH_MFP (management frame protection) values */ 621 #define IW_AUTH_MFP_DISABLED 0 /* MFP disabled */ 622 #define IW_AUTH_MFP_OPTIONAL 1 /* MFP optional */ 623 #define IW_AUTH_MFP_REQUIRED 2 /* MFP required */ 624 625 /* SIOCSIWENCODEEXT definitions */ 626 #define IW_ENCODE_SEQ_MAX_SIZE 8 627 /* struct iw_encode_ext ->alg */ 628 #define IW_ENCODE_ALG_NONE 0 629 #define IW_ENCODE_ALG_WEP 1 630 #define IW_ENCODE_ALG_TKIP 2 631 #define IW_ENCODE_ALG_CCMP 3 632 #define IW_ENCODE_ALG_PMK 4 633 #define IW_ENCODE_ALG_AES_CMAC 5 634 /* struct iw_encode_ext ->ext_flags */ 635 #define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 636 #define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 637 #define IW_ENCODE_EXT_GROUP_KEY 0x00000004 638 #define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 639 640 /* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ 641 #define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ 642 #define IW_MICFAILURE_GROUP 0x00000004 643 #define IW_MICFAILURE_PAIRWISE 0x00000008 644 #define IW_MICFAILURE_STAKEY 0x00000010 645 #define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) 646 */ 647 648 /* Bit field values for enc_capa in struct iw_range */ 649 #define IW_ENC_CAPA_WPA 0x00000001 650 #define IW_ENC_CAPA_WPA2 0x00000002 651 #define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 652 #define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 653 #define IW_ENC_CAPA_4WAY_HANDSHAKE 0x00000010 654 655 /* Event capability macros - in (struct iw_range *)->event_capa 656 * Because we have more than 32 possible events, we use an array of 657 * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ 658 #define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \ 659 (cmd - SIOCIWFIRSTPRIV + 0x60) : \ 660 (cmd - SIOCIWFIRST)) 661 #define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5) 662 #define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F)) 663 /* Event capability constants - event autogenerated by the kernel 664 * This list is valid for most 802.11 devices, customise as needed... */ 665 #define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \ 666 IW_EVENT_CAPA_MASK(0x8B06) | \ 667 IW_EVENT_CAPA_MASK(0x8B1A)) 668 #define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A)) 669 /* "Easy" macro to set events in iw_range (less efficient) */ 670 #define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd)) 671 #define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; } 672 673 674 /****************************** TYPES ******************************/ 675 676 /* --------------------------- SUBTYPES --------------------------- */ 677 /* 678 * Generic format for most parameters that fit in an int 679 */ 680 struct iw_param { 681 __s32 value; /* The value of the parameter itself */ 682 __u8 fixed; /* Hardware should not use auto select */ 683 __u8 disabled; /* Disable the feature */ 684 __u16 flags; /* Various specifc flags (if any) */ 685 }; 686 687 /* 688 * For all data larger than 16 octets, we need to use a 689 * pointer to memory allocated in user space. 690 */ 691 struct iw_point { 692 void __user *pointer; /* Pointer to the data (in user space) */ 693 __u16 length; /* number of fields or size in bytes */ 694 __u16 flags; /* Optional params */ 695 }; 696 697 698 /* 699 * A frequency 700 * For numbers lower than 10^9, we encode the number in 'm' and 701 * set 'e' to 0 702 * For number greater than 10^9, we divide it by the lowest power 703 * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... 704 * The power of 10 is in 'e', the result of the division is in 'm'. 705 */ 706 struct iw_freq { 707 __s32 m; /* Mantissa */ 708 __s16 e; /* Exponent */ 709 __u8 i; /* List index (when in range struct) */ 710 __u8 flags; /* Flags (fixed/auto) */ 711 }; 712 713 /* 714 * Quality of the link 715 */ 716 struct iw_quality { 717 __u8 qual; /* link quality (%retries, SNR, 718 %missed beacons or better...) */ 719 __u8 level; /* signal level (dBm) */ 720 __u8 noise; /* noise level (dBm) */ 721 __u8 updated; /* Flags to know if updated */ 722 }; 723 724 /* 725 * Packet discarded in the wireless adapter due to 726 * "wireless" specific problems... 727 * Note : the list of counter and statistics in net_device_stats 728 * is already pretty exhaustive, and you should use that first. 729 * This is only additional stats... 730 */ 731 struct iw_discarded { 732 __u32 nwid; /* Rx : Wrong nwid/essid */ 733 __u32 code; /* Rx : Unable to code/decode (WEP) */ 734 __u32 fragment; /* Rx : Can't perform MAC reassembly */ 735 __u32 retries; /* Tx : Max MAC retries num reached */ 736 __u32 misc; /* Others cases */ 737 }; 738 739 /* 740 * Packet/Time period missed in the wireless adapter due to 741 * "wireless" specific problems... 742 */ 743 struct iw_missed { 744 __u32 beacon; /* Missed beacons/superframe */ 745 }; 746 747 /* 748 * Quality range (for spy threshold) 749 */ 750 struct iw_thrspy { 751 struct sockaddr addr; /* Source address (hw/mac) */ 752 struct iw_quality qual; /* Quality of the link */ 753 struct iw_quality low; /* Low threshold */ 754 struct iw_quality high; /* High threshold */ 755 }; 756 757 /* 758 * Optional data for scan request 759 * 760 * Note: these optional parameters are controlling parameters for the 761 * scanning behavior, these do not apply to getting scan results 762 * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and 763 * provide a merged results with all BSSes even if the previous scan 764 * request limited scanning to a subset, e.g., by specifying an SSID. 765 * Especially, scan results are required to include an entry for the 766 * current BSS if the driver is in Managed mode and associated with an AP. 767 */ 768 struct iw_scan_req { 769 __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ 770 __u8 essid_len; 771 __u8 num_channels; /* num entries in channel_list; 772 * 0 = scan all allowed channels */ 773 __u8 flags; /* reserved as padding; use zero, this may 774 * be used in the future for adding flags 775 * to request different scan behavior */ 776 struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or 777 * individual address of a specific BSS */ 778 779 /* 780 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using 781 * the current ESSID. This allows scan requests for specific ESSID 782 * without having to change the current ESSID and potentially breaking 783 * the current association. 784 */ 785 __u8 essid[IW_ESSID_MAX_SIZE]; 786 787 /* 788 * Optional parameters for changing the default scanning behavior. 789 * These are based on the MLME-SCAN.request from IEEE Std 802.11. 790 * TU is 1.024 ms. If these are set to 0, driver is expected to use 791 * reasonable default values. min_channel_time defines the time that 792 * will be used to wait for the first reply on each channel. If no 793 * replies are received, next channel will be scanned after this. If 794 * replies are received, total time waited on the channel is defined by 795 * max_channel_time. 796 */ 797 __u32 min_channel_time; /* in TU */ 798 __u32 max_channel_time; /* in TU */ 799 800 struct iw_freq channel_list[IW_MAX_FREQUENCIES]; 801 }; 802 803 /* ------------------------- WPA SUPPORT ------------------------- */ 804 805 /* 806 * Extended data structure for get/set encoding (this is used with 807 * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* 808 * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and 809 * only the data contents changes (key data -> this structure, including 810 * key data). 811 * 812 * If the new key is the first group key, it will be set as the default 813 * TX key. Otherwise, default TX key index is only changed if 814 * IW_ENCODE_EXT_SET_TX_KEY flag is set. 815 * 816 * Key will be changed with SIOCSIWENCODEEXT in all cases except for 817 * special "change TX key index" operation which is indicated by setting 818 * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. 819 * 820 * tx_seq/rx_seq are only used when respective 821 * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal 822 * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start 823 * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally 824 * used only by an Authenticator (AP or an IBSS station) to get the 825 * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and 826 * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for 827 * debugging/testing. 828 */ 829 struct iw_encode_ext { 830 __u32 ext_flags; /* IW_ENCODE_EXT_* */ 831 __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 832 __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 833 struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast 834 * (group) keys or unicast address for 835 * individual keys */ 836 __u16 alg; /* IW_ENCODE_ALG_* */ 837 __u16 key_len; 838 __u8 key[0]; 839 }; 840 841 /* SIOCSIWMLME data */ 842 struct iw_mlme { 843 __u16 cmd; /* IW_MLME_* */ 844 __u16 reason_code; 845 struct sockaddr addr; 846 }; 847 848 /* SIOCSIWPMKSA data */ 849 #define IW_PMKSA_ADD 1 850 #define IW_PMKSA_REMOVE 2 851 #define IW_PMKSA_FLUSH 3 852 853 #define IW_PMKID_LEN 16 854 855 struct iw_pmksa { 856 __u32 cmd; /* IW_PMKSA_* */ 857 struct sockaddr bssid; 858 __u8 pmkid[IW_PMKID_LEN]; 859 }; 860 861 /* IWEVMICHAELMICFAILURE data */ 862 struct iw_michaelmicfailure { 863 __u32 flags; 864 struct sockaddr src_addr; 865 __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 866 }; 867 868 /* IWEVPMKIDCAND data */ 869 #define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ 870 struct iw_pmkid_cand { 871 __u32 flags; /* IW_PMKID_CAND_* */ 872 __u32 index; /* the smaller the index, the higher the 873 * priority */ 874 struct sockaddr bssid; 875 }; 876 877 /* ------------------------ WIRELESS STATS ------------------------ */ 878 /* 879 * Wireless statistics (used for /proc/net/wireless) 880 */ 881 struct iw_statistics { 882 __u16 status; /* Status 883 * - device dependent for now */ 884 885 struct iw_quality qual; /* Quality of the link 886 * (instant/mean/max) */ 887 struct iw_discarded discard; /* Packet discarded counts */ 888 struct iw_missed miss; /* Packet missed counts */ 889 }; 890 891 /* ------------------------ IOCTL REQUEST ------------------------ */ 892 /* 893 * This structure defines the payload of an ioctl, and is used 894 * below. 895 * 896 * Note that this structure should fit on the memory footprint 897 * of iwreq (which is the same as ifreq), which mean a max size of 898 * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... 899 * You should check this when increasing the structures defined 900 * above in this file... 901 */ 902 union iwreq_data { 903 /* Config - generic */ 904 char name[IFNAMSIZ]; 905 /* Name : used to verify the presence of wireless extensions. 906 * Name of the protocol/provider... */ 907 908 struct iw_point essid; /* Extended network name */ 909 struct iw_param nwid; /* network id (or domain - the cell) */ 910 struct iw_freq freq; /* frequency or channel : 911 * 0-1000 = channel 912 * > 1000 = frequency in Hz */ 913 914 struct iw_param sens; /* signal level threshold */ 915 struct iw_param bitrate; /* default bit rate */ 916 struct iw_param txpower; /* default transmit power */ 917 struct iw_param rts; /* RTS threshold threshold */ 918 struct iw_param frag; /* Fragmentation threshold */ 919 __u32 mode; /* Operation mode */ 920 struct iw_param retry; /* Retry limits & lifetime */ 921 922 struct iw_point encoding; /* Encoding stuff : tokens */ 923 struct iw_param power; /* PM duration/timeout */ 924 struct iw_quality qual; /* Quality part of statistics */ 925 926 struct sockaddr ap_addr; /* Access point address */ 927 struct sockaddr addr; /* Destination address (hw/mac) */ 928 929 struct iw_param param; /* Other small parameters */ 930 struct iw_point data; /* Other large parameters */ 931 }; 932 933 /* 934 * The structure to exchange data for ioctl. 935 * This structure is the same as 'struct ifreq', but (re)defined for 936 * convenience... 937 * Do I need to remind you about structure size (32 octets) ? 938 */ 939 struct iwreq { 940 union 941 { 942 char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ 943 } ifr_ifrn; 944 945 /* Data part (defined just above) */ 946 union iwreq_data u; 947 }; 948 949 /* -------------------------- IOCTL DATA -------------------------- */ 950 /* 951 * For those ioctl which want to exchange mode data that what could 952 * fit in the above structure... 953 */ 954 955 /* 956 * Range of parameters 957 */ 958 959 struct iw_range { 960 /* Informative stuff (to choose between different interface) */ 961 __u32 throughput; /* To give an idea... */ 962 /* In theory this value should be the maximum benchmarked 963 * TCP/IP throughput, because with most of these devices the 964 * bit rate is meaningless (overhead an co) to estimate how 965 * fast the connection will go and pick the fastest one. 966 * I suggest people to play with Netperf or any benchmark... 967 */ 968 969 /* NWID (or domain id) */ 970 __u32 min_nwid; /* Minimal NWID we are able to set */ 971 __u32 max_nwid; /* Maximal NWID we are able to set */ 972 973 /* Old Frequency (backward compat - moved lower ) */ 974 __u16 old_num_channels; 975 __u8 old_num_frequency; 976 977 /* Scan capabilities */ 978 __u8 scan_capa; /* IW_SCAN_CAPA_* bit field */ 979 980 /* Wireless event capability bitmasks */ 981 __u32 event_capa[6]; 982 983 /* signal level threshold range */ 984 __s32 sensitivity; 985 986 /* Quality of link & SNR stuff */ 987 /* Quality range (link, level, noise) 988 * If the quality is absolute, it will be in the range [0 ; max_qual], 989 * if the quality is dBm, it will be in the range [max_qual ; 0]. 990 * Don't forget that we use 8 bit arithmetics... */ 991 struct iw_quality max_qual; /* Quality of the link */ 992 /* This should contain the average/typical values of the quality 993 * indicator. This should be the threshold between a "good" and 994 * a "bad" link (example : monitor going from green to orange). 995 * Currently, user space apps like quality monitors don't have any 996 * way to calibrate the measurement. With this, they can split 997 * the range between 0 and max_qual in different quality level 998 * (using a geometric subdivision centered on the average). 999 * I expect that people doing the user space apps will feedback 1000 * us on which value we need to put in each driver... */ 1001 struct iw_quality avg_qual; /* Quality of the link */ 1002 1003 /* Rates */ 1004 __u8 num_bitrates; /* Number of entries in the list */ 1005 __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ 1006 1007 /* RTS threshold */ 1008 __s32 min_rts; /* Minimal RTS threshold */ 1009 __s32 max_rts; /* Maximal RTS threshold */ 1010 1011 /* Frag threshold */ 1012 __s32 min_frag; /* Minimal frag threshold */ 1013 __s32 max_frag; /* Maximal frag threshold */ 1014 1015 /* Power Management duration & timeout */ 1016 __s32 min_pmp; /* Minimal PM period */ 1017 __s32 max_pmp; /* Maximal PM period */ 1018 __s32 min_pmt; /* Minimal PM timeout */ 1019 __s32 max_pmt; /* Maximal PM timeout */ 1020 __u16 pmp_flags; /* How to decode max/min PM period */ 1021 __u16 pmt_flags; /* How to decode max/min PM timeout */ 1022 __u16 pm_capa; /* What PM options are supported */ 1023 1024 /* Encoder stuff */ 1025 __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ 1026 __u8 num_encoding_sizes; /* Number of entry in the list */ 1027 __u8 max_encoding_tokens; /* Max number of tokens */ 1028 /* For drivers that need a "login/passwd" form */ 1029 __u8 encoding_login_index; /* token index for login token */ 1030 1031 /* Transmit power */ 1032 __u16 txpower_capa; /* What options are supported */ 1033 __u8 num_txpower; /* Number of entries in the list */ 1034 __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */ 1035 1036 /* Wireless Extension version info */ 1037 __u8 we_version_compiled; /* Must be WIRELESS_EXT */ 1038 __u8 we_version_source; /* Last update of source */ 1039 1040 /* Retry limits and lifetime */ 1041 __u16 retry_capa; /* What retry options are supported */ 1042 __u16 retry_flags; /* How to decode max/min retry limit */ 1043 __u16 r_time_flags; /* How to decode max/min retry life */ 1044 __s32 min_retry; /* Minimal number of retries */ 1045 __s32 max_retry; /* Maximal number of retries */ 1046 __s32 min_r_time; /* Minimal retry lifetime */ 1047 __s32 max_r_time; /* Maximal retry lifetime */ 1048 1049 /* Frequency */ 1050 __u16 num_channels; /* Number of channels [0; num - 1] */ 1051 __u8 num_frequency; /* Number of entry in the list */ 1052 struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ 1053 /* Note : this frequency list doesn't need to fit channel numbers, 1054 * because each entry contain its channel index */ 1055 1056 __u32 enc_capa; /* IW_ENC_CAPA_* bit field */ 1057 }; 1058 1059 /* 1060 * Private ioctl interface information 1061 */ 1062 1063 struct iw_priv_args { 1064 __u32 cmd; /* Number of the ioctl to issue */ 1065 __u16 set_args; /* Type and number of args */ 1066 __u16 get_args; /* Type and number of args */ 1067 char name[IFNAMSIZ]; /* Name of the extension */ 1068 }; 1069 1070 /* ----------------------- WIRELESS EVENTS ----------------------- */ 1071 /* 1072 * Wireless events are carried through the rtnetlink socket to user 1073 * space. They are encapsulated in the IFLA_WIRELESS field of 1074 * a RTM_NEWLINK message. 1075 */ 1076 1077 /* 1078 * A Wireless Event. Contains basically the same data as the ioctl... 1079 */ 1080 struct iw_event { 1081 __u16 len; /* Real length of this stuff */ 1082 __u16 cmd; /* Wireless IOCTL */ 1083 union iwreq_data u; /* IOCTL fixed payload */ 1084 }; 1085 1086 /* Size of the Event prefix (including padding and alignement junk) */ 1087 #define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) 1088 /* Size of the various events */ 1089 #define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) 1090 #define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) 1091 #define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) 1092 #define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) 1093 #define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) 1094 #define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) 1095 1096 /* iw_point events are special. First, the payload (extra data) come at 1097 * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second, 1098 * we omit the pointer, so start at an offset. */ 1099 #define IW_EV_POINT_OFF offsetof(struct iw_point, length) 1100 #define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ 1101 IW_EV_POINT_OFF) 1102 1103 1104 /* Size of the Event prefix when packed in stream */ 1105 #define IW_EV_LCP_PK_LEN (4) 1106 /* Size of the various events when packed in stream */ 1107 #define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ) 1108 #define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32)) 1109 #define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq)) 1110 #define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param)) 1111 #define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr)) 1112 #define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality)) 1113 #define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4) 1114 1115 #endif /* _UAPI_LINUX_WIRELESS_H */ 1116