1 /* 2 * Copyright (c) 2005 Voltaire Inc. All rights reserved. 3 * Copyright (c) 2005 Intel Corporation. All rights reserved. 4 * 5 * This software is available to you under a choice of one of two 6 * licenses. You may choose to be licensed under the terms of the GNU 7 * General Public License (GPL) Version 2, available from the file 8 * COPYING in the main directory of this source tree, or the 9 * OpenIB.org BSD license below: 10 * 11 * Redistribution and use in source and binary forms, with or 12 * without modification, are permitted provided that the following 13 * conditions are met: 14 * 15 * - Redistributions of source code must retain the above 16 * copyright notice, this list of conditions and the following 17 * disclaimer. 18 * 19 * - Redistributions in binary form must reproduce the above 20 * copyright notice, this list of conditions and the following 21 * disclaimer in the documentation and/or other materials 22 * provided with the distribution. 23 * 24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 25 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 26 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 27 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 28 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 29 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 30 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 31 * SOFTWARE. 32 */ 33 34 #if !defined(RDMA_CM_H) 35 #define RDMA_CM_H 36 37 #include <linux/socket.h> 38 #include <linux/in6.h> 39 #include <rdma/ib_addr.h> 40 #include <rdma/ib_sa.h> 41 #include <uapi/rdma/rdma_user_cm.h> 42 43 /* 44 * Upon receiving a device removal event, users must destroy the associated 45 * RDMA identifier and release all resources allocated with the device. 46 */ 47 enum rdma_cm_event_type { 48 RDMA_CM_EVENT_ADDR_RESOLVED, 49 RDMA_CM_EVENT_ADDR_ERROR, 50 RDMA_CM_EVENT_ROUTE_RESOLVED, 51 RDMA_CM_EVENT_ROUTE_ERROR, 52 RDMA_CM_EVENT_CONNECT_REQUEST, 53 RDMA_CM_EVENT_CONNECT_RESPONSE, 54 RDMA_CM_EVENT_CONNECT_ERROR, 55 RDMA_CM_EVENT_UNREACHABLE, 56 RDMA_CM_EVENT_REJECTED, 57 RDMA_CM_EVENT_ESTABLISHED, 58 RDMA_CM_EVENT_DISCONNECTED, 59 RDMA_CM_EVENT_DEVICE_REMOVAL, 60 RDMA_CM_EVENT_MULTICAST_JOIN, 61 RDMA_CM_EVENT_MULTICAST_ERROR, 62 RDMA_CM_EVENT_ADDR_CHANGE, 63 RDMA_CM_EVENT_TIMEWAIT_EXIT 64 }; 65 66 const char *__attribute_const__ rdma_event_msg(enum rdma_cm_event_type event); 67 68 #define RDMA_IB_IP_PS_MASK 0xFFFFFFFFFFFF0000ULL 69 #define RDMA_IB_IP_PS_TCP 0x0000000001060000ULL 70 #define RDMA_IB_IP_PS_UDP 0x0000000001110000ULL 71 #define RDMA_IB_IP_PS_IB 0x00000000013F0000ULL 72 73 struct rdma_addr { 74 struct sockaddr_storage src_addr; 75 struct sockaddr_storage dst_addr; 76 struct rdma_dev_addr dev_addr; 77 }; 78 79 struct rdma_route { 80 struct rdma_addr addr; 81 struct sa_path_rec *path_rec; 82 int num_paths; 83 }; 84 85 struct rdma_conn_param { 86 const void *private_data; 87 u8 private_data_len; 88 u8 responder_resources; 89 u8 initiator_depth; 90 u8 flow_control; 91 u8 retry_count; /* ignored when accepting */ 92 u8 rnr_retry_count; 93 /* Fields below ignored if a QP is created on the rdma_cm_id. */ 94 u8 srq; 95 u32 qp_num; 96 u32 qkey; 97 }; 98 99 struct rdma_ud_param { 100 const void *private_data; 101 u8 private_data_len; 102 struct rdma_ah_attr ah_attr; 103 u32 qp_num; 104 u32 qkey; 105 }; 106 107 struct rdma_cm_event { 108 enum rdma_cm_event_type event; 109 int status; 110 union { 111 struct rdma_conn_param conn; 112 struct rdma_ud_param ud; 113 } param; 114 }; 115 116 struct rdma_cm_id; 117 118 /** 119 * rdma_cm_event_handler - Callback used to report user events. 120 * 121 * Notes: Users may not call rdma_destroy_id from this callback to destroy 122 * the passed in id, or a corresponding listen id. Returning a 123 * non-zero value from the callback will destroy the passed in id. 124 */ 125 typedef int (*rdma_cm_event_handler)(struct rdma_cm_id *id, 126 struct rdma_cm_event *event); 127 128 struct rdma_cm_id { 129 struct ib_device *device; 130 void *context; 131 struct ib_qp *qp; 132 rdma_cm_event_handler event_handler; 133 struct rdma_route route; 134 enum rdma_ucm_port_space ps; 135 enum ib_qp_type qp_type; 136 u8 port_num; 137 }; 138 139 struct rdma_cm_id *__rdma_create_id(struct net *net, 140 rdma_cm_event_handler event_handler, 141 void *context, enum rdma_ucm_port_space ps, 142 enum ib_qp_type qp_type, 143 const char *caller); 144 145 /** 146 * rdma_create_id - Create an RDMA identifier. 147 * 148 * @net: The network namespace in which to create the new id. 149 * @event_handler: User callback invoked to report events associated with the 150 * returned rdma_id. 151 * @context: User specified context associated with the id. 152 * @ps: RDMA port space. 153 * @qp_type: type of queue pair associated with the id. 154 * 155 * The id holds a reference on the network namespace until it is destroyed. 156 */ 157 #define rdma_create_id(net, event_handler, context, ps, qp_type) \ 158 __rdma_create_id((net), (event_handler), (context), (ps), (qp_type), \ 159 KBUILD_MODNAME) 160 161 /** 162 * rdma_destroy_id - Destroys an RDMA identifier. 163 * 164 * @id: RDMA identifier. 165 * 166 * Note: calling this function has the effect of canceling in-flight 167 * asynchronous operations associated with the id. 168 */ 169 void rdma_destroy_id(struct rdma_cm_id *id); 170 171 /** 172 * rdma_bind_addr - Bind an RDMA identifier to a source address and 173 * associated RDMA device, if needed. 174 * 175 * @id: RDMA identifier. 176 * @addr: Local address information. Wildcard values are permitted. 177 * 178 * This associates a source address with the RDMA identifier before calling 179 * rdma_listen. If a specific local address is given, the RDMA identifier will 180 * be bound to a local RDMA device. 181 */ 182 int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr); 183 184 /** 185 * rdma_resolve_addr - Resolve destination and optional source addresses 186 * from IP addresses to an RDMA address. If successful, the specified 187 * rdma_cm_id will be bound to a local device. 188 * 189 * @id: RDMA identifier. 190 * @src_addr: Source address information. This parameter may be NULL. 191 * @dst_addr: Destination address information. 192 * @timeout_ms: Time to wait for resolution to complete. 193 */ 194 int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr, 195 const struct sockaddr *dst_addr, int timeout_ms); 196 197 /** 198 * rdma_resolve_route - Resolve the RDMA address bound to the RDMA identifier 199 * into route information needed to establish a connection. 200 * 201 * This is called on the client side of a connection. 202 * Users must have first called rdma_resolve_addr to resolve a dst_addr 203 * into an RDMA address before calling this routine. 204 */ 205 int rdma_resolve_route(struct rdma_cm_id *id, int timeout_ms); 206 207 /** 208 * rdma_create_qp - Allocate a QP and associate it with the specified RDMA 209 * identifier. 210 * 211 * QPs allocated to an rdma_cm_id will automatically be transitioned by the CMA 212 * through their states. 213 */ 214 int rdma_create_qp(struct rdma_cm_id *id, struct ib_pd *pd, 215 struct ib_qp_init_attr *qp_init_attr); 216 217 /** 218 * rdma_destroy_qp - Deallocate the QP associated with the specified RDMA 219 * identifier. 220 * 221 * Users must destroy any QP associated with an RDMA identifier before 222 * destroying the RDMA ID. 223 */ 224 void rdma_destroy_qp(struct rdma_cm_id *id); 225 226 /** 227 * rdma_init_qp_attr - Initializes the QP attributes for use in transitioning 228 * to a specified QP state. 229 * @id: Communication identifier associated with the QP attributes to 230 * initialize. 231 * @qp_attr: On input, specifies the desired QP state. On output, the 232 * mandatory and desired optional attributes will be set in order to 233 * modify the QP to the specified state. 234 * @qp_attr_mask: The QP attribute mask that may be used to transition the 235 * QP to the specified state. 236 * 237 * Users must set the @qp_attr->qp_state to the desired QP state. This call 238 * will set all required attributes for the given transition, along with 239 * known optional attributes. Users may override the attributes returned from 240 * this call before calling ib_modify_qp. 241 * 242 * Users that wish to have their QP automatically transitioned through its 243 * states can associate a QP with the rdma_cm_id by calling rdma_create_qp(). 244 */ 245 int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr, 246 int *qp_attr_mask); 247 248 /** 249 * rdma_connect - Initiate an active connection request. 250 * @id: Connection identifier to connect. 251 * @conn_param: Connection information used for connected QPs. 252 * 253 * Users must have resolved a route for the rdma_cm_id to connect with 254 * by having called rdma_resolve_route before calling this routine. 255 * 256 * This call will either connect to a remote QP or obtain remote QP 257 * information for unconnected rdma_cm_id's. The actual operation is 258 * based on the rdma_cm_id's port space. 259 */ 260 int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); 261 262 /** 263 * rdma_listen - This function is called by the passive side to 264 * listen for incoming connection requests. 265 * 266 * Users must have bound the rdma_cm_id to a local address by calling 267 * rdma_bind_addr before calling this routine. 268 */ 269 int rdma_listen(struct rdma_cm_id *id, int backlog); 270 271 int __rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param, 272 const char *caller); 273 274 /** 275 * rdma_accept - Called to accept a connection request or response. 276 * @id: Connection identifier associated with the request. 277 * @conn_param: Information needed to establish the connection. This must be 278 * provided if accepting a connection request. If accepting a connection 279 * response, this parameter must be NULL. 280 * 281 * Typically, this routine is only called by the listener to accept a connection 282 * request. It must also be called on the active side of a connection if the 283 * user is performing their own QP transitions. 284 * 285 * In the case of error, a reject message is sent to the remote side and the 286 * state of the qp associated with the id is modified to error, such that any 287 * previously posted receive buffers would be flushed. 288 */ 289 #define rdma_accept(id, conn_param) \ 290 __rdma_accept((id), (conn_param), KBUILD_MODNAME) 291 292 /** 293 * rdma_notify - Notifies the RDMA CM of an asynchronous event that has 294 * occurred on the connection. 295 * @id: Connection identifier to transition to established. 296 * @event: Asynchronous event. 297 * 298 * This routine should be invoked by users to notify the CM of relevant 299 * communication events. Events that should be reported to the CM and 300 * when to report them are: 301 * 302 * IB_EVENT_COMM_EST - Used when a message is received on a connected 303 * QP before an RTU has been received. 304 */ 305 int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event); 306 307 /** 308 * rdma_reject - Called to reject a connection request or response. 309 */ 310 int rdma_reject(struct rdma_cm_id *id, const void *private_data, 311 u8 private_data_len); 312 313 /** 314 * rdma_disconnect - This function disconnects the associated QP and 315 * transitions it into the error state. 316 */ 317 int rdma_disconnect(struct rdma_cm_id *id); 318 319 /** 320 * rdma_join_multicast - Join the multicast group specified by the given 321 * address. 322 * @id: Communication identifier associated with the request. 323 * @addr: Multicast address identifying the group to join. 324 * @join_state: Multicast JoinState bitmap requested by port. 325 * Bitmap is based on IB_SA_MCMEMBER_REC_JOIN_STATE bits. 326 * @context: User-defined context associated with the join request, returned 327 * to the user through the private_data pointer in multicast events. 328 */ 329 int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr, 330 u8 join_state, void *context); 331 332 /** 333 * rdma_leave_multicast - Leave the multicast group specified by the given 334 * address. 335 */ 336 void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr); 337 338 /** 339 * rdma_set_service_type - Set the type of service associated with a 340 * connection identifier. 341 * @id: Communication identifier to associated with service type. 342 * @tos: Type of service. 343 * 344 * The type of service is interpretted as a differentiated service 345 * field (RFC 2474). The service type should be specified before 346 * performing route resolution, as existing communication on the 347 * connection identifier may be unaffected. The type of service 348 * requested may not be supported by the network to all destinations. 349 */ 350 void rdma_set_service_type(struct rdma_cm_id *id, int tos); 351 352 /** 353 * rdma_set_reuseaddr - Allow the reuse of local addresses when binding 354 * the rdma_cm_id. 355 * @id: Communication identifier to configure. 356 * @reuse: Value indicating if the bound address is reusable. 357 * 358 * Reuse must be set before an address is bound to the id. 359 */ 360 int rdma_set_reuseaddr(struct rdma_cm_id *id, int reuse); 361 362 /** 363 * rdma_set_afonly - Specify that listens are restricted to the 364 * bound address family only. 365 * @id: Communication identifer to configure. 366 * @afonly: Value indicating if listens are restricted. 367 * 368 * Must be set before identifier is in the listening state. 369 */ 370 int rdma_set_afonly(struct rdma_cm_id *id, int afonly); 371 372 /** 373 * rdma_get_service_id - Return the IB service ID for a specified address. 374 * @id: Communication identifier associated with the address. 375 * @addr: Address for the service ID. 376 */ 377 __be64 rdma_get_service_id(struct rdma_cm_id *id, struct sockaddr *addr); 378 379 /** 380 * rdma_reject_msg - return a pointer to a reject message string. 381 * @id: Communication identifier that received the REJECT event. 382 * @reason: Value returned in the REJECT event status field. 383 */ 384 const char *__attribute_const__ rdma_reject_msg(struct rdma_cm_id *id, 385 int reason); 386 /** 387 * rdma_is_consumer_reject - return true if the consumer rejected the connect 388 * request. 389 * @id: Communication identifier that received the REJECT event. 390 * @reason: Value returned in the REJECT event status field. 391 */ 392 bool rdma_is_consumer_reject(struct rdma_cm_id *id, int reason); 393 394 /** 395 * rdma_consumer_reject_data - return the consumer reject private data and 396 * length, if any. 397 * @id: Communication identifier that received the REJECT event. 398 * @ev: RDMA CM reject event. 399 * @data_len: Pointer to the resulting length of the consumer data. 400 */ 401 const void *rdma_consumer_reject_data(struct rdma_cm_id *id, 402 struct rdma_cm_event *ev, u8 *data_len); 403 404 /** 405 * rdma_read_gids - Return the SGID and DGID used for establishing 406 * connection. This can be used after rdma_resolve_addr() 407 * on client side. This can be use on new connection 408 * on server side. This is applicable to IB, RoCE, iWarp. 409 * If cm_id is not bound yet to the RDMA device, it doesn't 410 * copy and SGID or DGID to the given pointers. 411 * @id: Communication identifier whose GIDs are queried. 412 * @sgid: Pointer to SGID where SGID will be returned. It is optional. 413 * @dgid: Pointer to DGID where DGID will be returned. It is optional. 414 * Note: This API should not be used by any new ULPs or new code. 415 * Instead, users interested in querying GIDs should refer to path record 416 * of the rdma_cm_id to query the GIDs. 417 * This API is provided for compatibility for existing users. 418 */ 419 420 void rdma_read_gids(struct rdma_cm_id *cm_id, union ib_gid *sgid, 421 union ib_gid *dgid); 422 423 struct iw_cm_id *rdma_iw_cm_id(struct rdma_cm_id *cm_id); 424 struct rdma_cm_id *rdma_res_to_id(struct rdma_restrack_entry *res); 425 426 #endif /* RDMA_CM_H */ 427