| /linux-4.19.296/drivers/irqchip/ |
| D | spear-shirq.c | 43 u32 status_reg; member
93 .status_reg = SPEAR300_INT_STS_MASK_REG,
109 .status_reg = SPEAR310_INT_STS_MASK_REG,
117 .status_reg = SPEAR310_INT_STS_MASK_REG,
125 .status_reg = SPEAR310_INT_STS_MASK_REG,
133 .status_reg = SPEAR310_INT_STS_MASK_REG,
159 .status_reg = SPEAR320_INT_STS_MASK_REG,
167 .status_reg = SPEAR320_INT_STS_MASK_REG,
175 .status_reg = SPEAR320_INT_STS_MASK_REG,
190 pend = readl(shirq->base + shirq->status_reg) & shirq->mask; in shirq_handler()
|
| /linux-4.19.296/drivers/regulator/ |
| D | hi655x-regulator.c | 30 unsigned int status_reg; member
84 regmap_read(rdev->regmap, regulator->status_reg, &value); in hi655x_is_enabled()
135 .status_reg = HI655X_BUS_ADDR(sreg), \
158 .status_reg = HI655X_BUS_ADDR(sreg), \
|
| /linux-4.19.296/drivers/clk/microchip/ |
| D | clk-core.h | 30 const u32 status_reg; member
60 const u32 status_reg; member
|
| D | clk-core.c | 588 void __iomem *status_reg; member
723 err = readl_poll_timeout_atomic(pll->status_reg, v, in spll_clk_set_rate()
750 spll->status_reg = data->status_reg + core->iobase; in pic32_spll_clk_register()
958 void __iomem *status_reg; member
976 return readl_poll_timeout_atomic(sosc->status_reg, v, in sosc_clk_enable()
995 ready = readl(sosc->status_reg) & sosc->status_mask; in sosc_clk_is_enabled()
1028 sosc->status_reg = data->status_reg + core->iobase; in pic32_sosc_clk_register()
|
| D | clk-pic32mzda.c | 105 .status_reg = 0x1d0,
118 .status_reg = 0x1d0,
|
| /linux-4.19.296/include/linux/ |
| D | sh_clk.h | 56 void __iomem *status_reg; member
122 .status_reg = _status_reg, \
|
| /linux-4.19.296/drivers/clk/qcom/ |
| D | clk-pll.h | 53 u32 status_reg; member
|
| D | a53-pll.c | 65 pll->status_reg = 0x1c; in qcom_a53pll_probe()
|
| D | lcc-ipq806x.c | 40 .status_reg = 0x18,
|
| D | gcc-ipq806x.c | 41 .status_reg = 0x30d8,
68 .status_reg = 0x3178,
95 .status_reg = 0x3158,
122 .status_reg = 0x31d8,
163 .status_reg = 0x31b8,
|
| D | gcc-mdm9615.c | 54 .status_reg = 0x30d8,
92 .status_reg = 0x3158,
119 .status_reg = 0x31d8,
|
| D | mmcc-msm8974.c | 193 .status_reg = 0x001c,
220 .status_reg = 0x005c,
247 .status_reg = 0x411c,
262 .status_reg = 0x009c,
|
| D | clk-pll.c | 196 ret = regmap_read(pll->clkr.regmap, pll->status_reg, &val); in wait_for_pll()
|
| D | mmcc-apq8084.c | 228 .status_reg = 0x001c,
255 .status_reg = 0x005c,
282 .status_reg = 0x411c,
297 .status_reg = 0x009c,
313 .status_reg = 0x00bc,
|
| D | lcc-msm8960.c | 40 .status_reg = 0x18,
|
| D | lcc-mdm9615.c | 42 .status_reg = 0x18,
|
| D | gcc-msm8916.c | 273 .status_reg = 0x2101c,
300 .status_reg = 0x2001c,
327 .status_reg = 0x4a01c,
354 .status_reg = 0x2301c,
|
| D | gcc-msm8974.c | 71 .status_reg = 0x001c,
134 .status_reg = 0x005c,
161 .status_reg = 0x1ddc,
|
| D | gcc-msm8960.c | 41 .status_reg = 0x3178,
68 .status_reg = 0x3158,
95 .status_reg = 0x31d8,
|
| D | gcc-apq8084.c | 115 .status_reg = 0x001c,
178 .status_reg = 0x005c,
205 .status_reg = 0x1ddc,
|
| D | mmcc-msm8960.c | 122 .status_reg = 0x334,
138 .status_reg = 0x350,
|
| D | gcc-msm8660.c | 41 .status_reg = 0x3158,
|
| /linux-4.19.296/drivers/iio/adc/ |
| D | twl4030-madc.c | 591 u8 status_reg) in twl4030_madc_wait_conversion_ready() argument
600 ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, ®, status_reg); in twl4030_madc_wait_conversion_ready()
604 status_reg); in twl4030_madc_wait_conversion_ready()
|
| /linux-4.19.296/drivers/sh/clk/ |
| D | cpg.c | 57 if (clk->status_reg) { in sh_clk_mstp_enable()
60 void __iomem *mapped_status = (phys_addr_t)clk->status_reg - in sh_clk_mstp_enable()
|
| /linux-4.19.296/drivers/pci/controller/ |
| D | pcie-xilinx-nwl.c | 346 static void nwl_pcie_handle_msi_irq(struct nwl_pcie *pcie, u32 status_reg) in nwl_pcie_handle_msi_irq() argument
355 while ((status = nwl_bridge_readl(pcie, status_reg)) != 0) { in nwl_pcie_handle_msi_irq()
357 nwl_bridge_writel(pcie, 1 << bit, status_reg); in nwl_pcie_handle_msi_irq()
|