1 /* 2 v4l2 common internal API header 3 4 This header contains internal shared ioctl definitions for use by the 5 internal low-level v4l2 drivers. 6 Each ioctl begins with VIDIOC_INT_ to clearly mark that it is an internal 7 define, 8 9 Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl> 10 11 This program is free software; you can redistribute it and/or modify 12 it under the terms of the GNU General Public License as published by 13 the Free Software Foundation; either version 2 of the License, or 14 (at your option) any later version. 15 16 This program is distributed in the hope that it will be useful, 17 but WITHOUT ANY WARRANTY; without even the implied warranty of 18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 GNU General Public License for more details. 20 21 You should have received a copy of the GNU General Public License 22 along with this program; if not, write to the Free Software 23 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 24 */ 25 26 #ifndef V4L2_COMMON_H_ 27 #define V4L2_COMMON_H_ 28 29 #include <media/v4l2-dev.h> 30 31 /* Common printk constructs for v4l-i2c drivers. These macros create a unique 32 prefix consisting of the driver name, the adapter number and the i2c 33 address. */ 34 #define v4l_printk(level, name, adapter, addr, fmt, arg...) \ 35 printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg) 36 37 #define v4l_client_printk(level, client, fmt, arg...) \ 38 v4l_printk(level, (client)->dev.driver->name, (client)->adapter, \ 39 (client)->addr, fmt , ## arg) 40 41 #define v4l_err(client, fmt, arg...) \ 42 v4l_client_printk(KERN_ERR, client, fmt , ## arg) 43 44 #define v4l_warn(client, fmt, arg...) \ 45 v4l_client_printk(KERN_WARNING, client, fmt , ## arg) 46 47 #define v4l_info(client, fmt, arg...) \ 48 v4l_client_printk(KERN_INFO, client, fmt , ## arg) 49 50 /* These three macros assume that the debug level is set with a module 51 parameter called 'debug'. */ 52 #define v4l_dbg(level, debug, client, fmt, arg...) \ 53 do { \ 54 if (debug >= (level)) \ 55 v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \ 56 } while (0) 57 58 /* Add a version of v4l_dbg to be used on drivers using dev_foo() macros */ 59 #define dev_dbg_lvl(__dev, __level, __debug, __fmt, __arg...) \ 60 do { \ 61 if (__debug >= (__level)) \ 62 dev_printk(KERN_DEBUG, __dev, __fmt, ##__arg); \ 63 } while (0) 64 65 /* ------------------------------------------------------------------------- */ 66 67 /* These printk constructs can be used with v4l2_device and v4l2_subdev */ 68 #define v4l2_printk(level, dev, fmt, arg...) \ 69 printk(level "%s: " fmt, (dev)->name , ## arg) 70 71 #define v4l2_err(dev, fmt, arg...) \ 72 v4l2_printk(KERN_ERR, dev, fmt , ## arg) 73 74 #define v4l2_warn(dev, fmt, arg...) \ 75 v4l2_printk(KERN_WARNING, dev, fmt , ## arg) 76 77 #define v4l2_info(dev, fmt, arg...) \ 78 v4l2_printk(KERN_INFO, dev, fmt , ## arg) 79 80 /* These three macros assume that the debug level is set with a module 81 parameter called 'debug'. */ 82 #define v4l2_dbg(level, debug, dev, fmt, arg...) \ 83 do { \ 84 if (debug >= (level)) \ 85 v4l2_printk(KERN_DEBUG, dev, fmt , ## arg); \ 86 } while (0) 87 88 /** 89 * v4l2_ctrl_query_fill- Fill in a struct v4l2_queryctrl 90 * 91 * @qctrl: pointer to the &struct v4l2_queryctrl to be filled 92 * @min: minimum value for the control 93 * @max: maximum value for the control 94 * @step: control step 95 * @def: default value for the control 96 * 97 * Fills the &struct v4l2_queryctrl fields for the query control. 98 * 99 * .. note:: 100 * 101 * This function assumes that the @qctrl->id field is filled. 102 * 103 * Returns -EINVAL if the control is not known by the V4L2 core, 0 on success. 104 */ 105 106 int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, 107 s32 min, s32 max, s32 step, s32 def); 108 109 /* ------------------------------------------------------------------------- */ 110 111 /* I2C Helper functions */ 112 113 struct i2c_driver; 114 struct i2c_adapter; 115 struct i2c_client; 116 struct i2c_device_id; 117 struct v4l2_device; 118 struct v4l2_subdev; 119 struct v4l2_subdev_ops; 120 121 /** 122 * v4l2_i2c_new_subdev - Load an i2c module and return an initialized 123 * &struct v4l2_subdev. 124 * 125 * @v4l2_dev: pointer to &struct v4l2_device 126 * @adapter: pointer to struct i2c_adapter 127 * @client_type: name of the chip that's on the adapter. 128 * @addr: I2C address. If zero, it will use @probe_addrs 129 * @probe_addrs: array with a list of address. The last entry at such 130 * array should be %I2C_CLIENT_END. 131 * 132 * returns a &struct v4l2_subdev pointer. 133 */ 134 struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, 135 struct i2c_adapter *adapter, const char *client_type, 136 u8 addr, const unsigned short *probe_addrs); 137 138 struct i2c_board_info; 139 140 /** 141 * v4l2_i2c_new_subdev_board - Load an i2c module and return an initialized 142 * &struct v4l2_subdev. 143 * 144 * @v4l2_dev: pointer to &struct v4l2_device 145 * @adapter: pointer to struct i2c_adapter 146 * @info: pointer to struct i2c_board_info used to replace the irq, 147 * platform_data and addr arguments. 148 * @probe_addrs: array with a list of address. The last entry at such 149 * array should be %I2C_CLIENT_END. 150 * 151 * returns a &struct v4l2_subdev pointer. 152 */ 153 struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, 154 struct i2c_adapter *adapter, struct i2c_board_info *info, 155 const unsigned short *probe_addrs); 156 157 /** 158 * v4l2_i2c_subdev_init - Initializes a &struct v4l2_subdev with data from 159 * an i2c_client struct. 160 * 161 * @sd: pointer to &struct v4l2_subdev 162 * @client: pointer to struct i2c_client 163 * @ops: pointer to &struct v4l2_subdev_ops 164 */ 165 void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client, 166 const struct v4l2_subdev_ops *ops); 167 168 /** 169 * v4l2_i2c_subdev_addr - returns i2c client address of &struct v4l2_subdev. 170 * 171 * @sd: pointer to &struct v4l2_subdev 172 * 173 * Returns the address of an I2C sub-device 174 */ 175 unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd); 176 177 /** 178 * enum v4l2_i2c_tuner_type - specifies the range of tuner address that 179 * should be used when seeking for I2C devices. 180 * 181 * @ADDRS_RADIO: Radio tuner addresses. 182 * Represent the following I2C addresses: 183 * 0x10 (if compiled with tea5761 support) 184 * and 0x60. 185 * @ADDRS_DEMOD: Demod tuner addresses. 186 * Represent the following I2C addresses: 187 * 0x42, 0x43, 0x4a and 0x4b. 188 * @ADDRS_TV: TV tuner addresses. 189 * Represent the following I2C addresses: 190 * 0x42, 0x43, 0x4a, 0x4b, 0x60, 0x61, 0x62, 191 * 0x63 and 0x64. 192 * @ADDRS_TV_WITH_DEMOD: TV tuner addresses if demod is present, this 193 * excludes addresses used by the demodulator 194 * from the list of candidates. 195 * Represent the following I2C addresses: 196 * 0x60, 0x61, 0x62, 0x63 and 0x64. 197 * 198 * NOTE: All I2C addresses above use the 7-bit notation. 199 */ 200 enum v4l2_i2c_tuner_type { 201 ADDRS_RADIO, 202 ADDRS_DEMOD, 203 ADDRS_TV, 204 ADDRS_TV_WITH_DEMOD, 205 }; 206 /** 207 * v4l2_i2c_tuner_addrs - Return a list of I2C tuner addresses to probe. 208 * 209 * @type: type of the tuner to seek, as defined by 210 * &enum v4l2_i2c_tuner_type. 211 * 212 * NOTE: Use only if the tuner addresses are unknown. 213 */ 214 const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type); 215 216 /* ------------------------------------------------------------------------- */ 217 218 /* SPI Helper functions */ 219 #if defined(CONFIG_SPI) 220 221 #include <linux/spi/spi.h> 222 223 struct spi_device; 224 225 /** 226 * v4l2_spi_new_subdev - Load an spi module and return an initialized 227 * &struct v4l2_subdev. 228 * 229 * 230 * @v4l2_dev: pointer to &struct v4l2_device. 231 * @master: pointer to struct spi_master. 232 * @info: pointer to struct spi_board_info. 233 * 234 * returns a &struct v4l2_subdev pointer. 235 */ 236 struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev, 237 struct spi_master *master, struct spi_board_info *info); 238 239 /** 240 * v4l2_spi_subdev_init - Initialize a v4l2_subdev with data from an 241 * spi_device struct. 242 * 243 * @sd: pointer to &struct v4l2_subdev 244 * @spi: pointer to struct spi_device. 245 * @ops: pointer to &struct v4l2_subdev_ops 246 */ 247 void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi, 248 const struct v4l2_subdev_ops *ops); 249 #endif 250 251 /* ------------------------------------------------------------------------- */ 252 253 /* 254 * FIXME: these remaining ioctls/structs should be removed as well, but they 255 * are still used in tuner-simple.c (TUNER_SET_CONFIG) and cx18/ivtv (RESET). 256 * To remove these ioctls some more cleanup is needed in those modules. 257 * 258 * It doesn't make much sense on documenting them, as what we really want is 259 * to get rid of them. 260 */ 261 262 /* s_config */ 263 struct v4l2_priv_tun_config { 264 int tuner; 265 void *priv; 266 }; 267 #define TUNER_SET_CONFIG _IOW('d', 92, struct v4l2_priv_tun_config) 268 269 #define VIDIOC_INT_RESET _IOW ('d', 102, u32) 270 271 /* ------------------------------------------------------------------------- */ 272 273 /* Miscellaneous helper functions */ 274 275 /** 276 * v4l_bound_align_image - adjust video dimensions according to 277 * a given constraints. 278 * 279 * @width: pointer to width that will be adjusted if needed. 280 * @wmin: minimum width. 281 * @wmax: maximum width. 282 * @walign: least significant bit on width. 283 * @height: pointer to height that will be adjusted if needed. 284 * @hmin: minimum height. 285 * @hmax: maximum height. 286 * @halign: least significant bit on width. 287 * @salign: least significant bit for the image size (e. g. 288 * :math:`width * height`). 289 * 290 * Clip an image to have @width between @wmin and @wmax, and @height between 291 * @hmin and @hmax, inclusive. 292 * 293 * Additionally, the @width will be a multiple of :math:`2^{walign}`, 294 * the @height will be a multiple of :math:`2^{halign}`, and the overall 295 * size :math:`width * height` will be a multiple of :math:`2^{salign}`. 296 * 297 * .. note:: 298 * 299 * #. The clipping rectangle may be shrunk or enlarged to fit the alignment 300 * constraints. 301 * #. @wmax must not be smaller than @wmin. 302 * #. @hmax must not be smaller than @hmin. 303 * #. The alignments must not be so high there are no possible image 304 * sizes within the allowed bounds. 305 * #. @wmin and @hmin must be at least 1 (don't use 0). 306 * #. For @walign, @halign and @salign, if you don't care about a certain 307 * alignment, specify ``0``, as :math:`2^0 = 1` and one byte alignment 308 * is equivalent to no alignment. 309 * #. If you only want to adjust downward, specify a maximum that's the 310 * same as the initial value. 311 */ 312 void v4l_bound_align_image(unsigned int *width, unsigned int wmin, 313 unsigned int wmax, unsigned int walign, 314 unsigned int *height, unsigned int hmin, 315 unsigned int hmax, unsigned int halign, 316 unsigned int salign); 317 318 /** 319 * v4l2_find_nearest_size - Find the nearest size among a discrete 320 * set of resolutions contained in an array of a driver specific struct. 321 * 322 * @array: a driver specific array of image sizes 323 * @array_size: the length of the driver specific array of image sizes 324 * @width_field: the name of the width field in the driver specific struct 325 * @height_field: the name of the height field in the driver specific struct 326 * @width: desired width. 327 * @height: desired height. 328 * 329 * Finds the closest resolution to minimize the width and height differences 330 * between what requested and the supported resolutions. The size of the width 331 * and height fields in the driver specific must equal to that of u32, i.e. four 332 * bytes. 333 * 334 * Returns the best match or NULL if the length of the array is zero. 335 */ 336 #define v4l2_find_nearest_size(array, array_size, width_field, height_field, \ 337 width, height) \ 338 ({ \ 339 BUILD_BUG_ON(sizeof((array)->width_field) != sizeof(u32) || \ 340 sizeof((array)->height_field) != sizeof(u32)); \ 341 (typeof(&(array)[0]))__v4l2_find_nearest_size( \ 342 (array), array_size, sizeof(*(array)), \ 343 offsetof(typeof(*(array)), width_field), \ 344 offsetof(typeof(*(array)), height_field), \ 345 width, height); \ 346 }) 347 const void * 348 __v4l2_find_nearest_size(const void *array, size_t array_size, 349 size_t entry_size, size_t width_offset, 350 size_t height_offset, s32 width, s32 height); 351 352 /** 353 * v4l2_get_timestamp - helper routine to get a timestamp to be used when 354 * filling streaming metadata. Internally, it uses ktime_get_ts(), 355 * which is the recommended way to get it. 356 * 357 * @tv: pointer to &struct timeval to be filled. 358 */ 359 void v4l2_get_timestamp(struct timeval *tv); 360 361 /** 362 * v4l2_g_parm_cap - helper routine for vidioc_g_parm to fill this in by 363 * calling the g_frame_interval op of the given subdev. It only works 364 * for V4L2_BUF_TYPE_VIDEO_CAPTURE(_MPLANE), hence the _cap in the 365 * function name. 366 * 367 * @vdev: the struct video_device pointer. Used to determine the device caps. 368 * @sd: the sub-device pointer. 369 * @a: the VIDIOC_G_PARM argument. 370 */ 371 int v4l2_g_parm_cap(struct video_device *vdev, 372 struct v4l2_subdev *sd, struct v4l2_streamparm *a); 373 374 /** 375 * v4l2_s_parm_cap - helper routine for vidioc_s_parm to fill this in by 376 * calling the s_frame_interval op of the given subdev. It only works 377 * for V4L2_BUF_TYPE_VIDEO_CAPTURE(_MPLANE), hence the _cap in the 378 * function name. 379 * 380 * @vdev: the struct video_device pointer. Used to determine the device caps. 381 * @sd: the sub-device pointer. 382 * @a: the VIDIOC_S_PARM argument. 383 */ 384 int v4l2_s_parm_cap(struct video_device *vdev, 385 struct v4l2_subdev *sd, struct v4l2_streamparm *a); 386 387 #endif /* V4L2_COMMON_H_ */ 388