xref: /wlan-driver/fw-api/hw/qca8074/v1/phyrx_pkt_end.h (revision 5113495b16420b49004c444715d2daae2066e7dc)
1 /*
2  * Copyright (c) 2018 The Linux Foundation. All rights reserved.
3  *
4  * Permission to use, copy, modify, and/or distribute this software for
5  * any purpose with or without fee is hereby granted, provided that the
6  * above copyright notice and this permission notice appear in all
7  * copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
10  * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
11  * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
12  * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
13  * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
14  * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
15  * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
16  * PERFORMANCE OF THIS SOFTWARE.
17  */
18 
19 // $ATH_LICENSE_HW_HDR_C$
20 //
21 // DO NOT EDIT!  This file is automatically generated
22 //               These definitions are tied to a particular hardware layout
23 
24 
25 #ifndef _PHYRX_PKT_END_H_
26 #define _PHYRX_PKT_END_H_
27 #if !defined(__ASSEMBLER__)
28 #endif
29 
30 #include "rx_location_info.h"
31 #include "rx_timing_offset_info.h"
32 #include "receive_rssi_info.h"
33 
34 // ################ START SUMMARY #################
35 //
36 //	Dword	Fields
37 //	0	phy_internal_nap[0], location_info_valid[1], timing_info_valid[2], rssi_info_valid[3], rx_frame_correction_needed[4], frameless_frame_received[5], reserved_0a[31:6]
38 //	1	phy_timestamp_1_lower_32[31:0]
39 //	2	phy_timestamp_1_upper_32[31:0]
40 //	3	phy_timestamp_2_lower_32[31:0]
41 //	4	phy_timestamp_2_upper_32[31:0]
42 //	5-13	struct rx_location_info rx_location_info_details;
43 //	14	struct rx_timing_offset_info rx_timing_offset_info_details;
44 //	15-30	struct receive_rssi_info post_rssi_info_details;
45 //	31	phy_sw_status_31_0[31:0]
46 //	32	phy_sw_status_63_32[31:0]
47 //
48 // ################ END SUMMARY #################
49 
50 #define NUM_OF_DWORDS_PHYRX_PKT_END 33
51 
52 struct phyrx_pkt_end {
53              uint32_t phy_internal_nap                :  1, //[0]
54                       location_info_valid             :  1, //[1]
55                       timing_info_valid               :  1, //[2]
56                       rssi_info_valid                 :  1, //[3]
57                       rx_frame_correction_needed      :  1, //[4]
58                       frameless_frame_received        :  1, //[5]
59                       reserved_0a                     : 26; //[31:6]
60              uint32_t phy_timestamp_1_lower_32        : 32; //[31:0]
61              uint32_t phy_timestamp_1_upper_32        : 32; //[31:0]
62              uint32_t phy_timestamp_2_lower_32        : 32; //[31:0]
63              uint32_t phy_timestamp_2_upper_32        : 32; //[31:0]
64     struct            rx_location_info                       rx_location_info_details;
65     struct            rx_timing_offset_info                       rx_timing_offset_info_details;
66     struct            receive_rssi_info                       post_rssi_info_details;
67              uint32_t phy_sw_status_31_0              : 32; //[31:0]
68              uint32_t phy_sw_status_63_32             : 32; //[31:0]
69 };
70 
71 /*
72 
73 phy_internal_nap
74 
75 			When set, PHY RX entered an internal NAP state, as PHY
76 			determined that this reception was not destined to this
77 			device
78 
79 location_info_valid
80 
81 			Indicates that the RX_LOCATION_INFO structure later on
82 			in the TLV contains valid info
83 
84 timing_info_valid
85 
86 			Indicates that the RX_TIMING_OFFSET_INFO structure later
87 			on in the TLV contains valid info
88 
89 rssi_info_valid
90 
91 			Indicates that the RECEIVE_RSSI_INFO structure later on
92 			in the TLV contains valid info
93 
94 rx_frame_correction_needed
95 
96 			When clear, no action is needed in the MAC.
97 
98 
99 
100 			When set, the falling edge of the rx_frame happened 4us
101 			too late. MAC will need to compensate for this delay in
102 			order to maintain proper SIFS timing and/or not to get
103 			de-slotted.
104 
105 
106 
107 			PHY uses this for very short 11a frames.
108 
109 
110 
111 			When set, PHY will have passed this TLV to the MAC up to
112 			8 us into the 'real SIFS' time, and thus within 4us from the
113 			falling edge of the rx_frame.
114 
115 
116 
117 			<legal all>
118 
119 frameless_frame_received
120 
121 			When set, PHY has received the 'frameless frame' . Can
122 			be used in the 'MU-RTS -CTS exchange where CTS reception can
123 			be problematic.
124 
125 			<legal all>
126 
127 reserved_0a
128 
129 			<legal 0>
130 
131 phy_timestamp_1_lower_32
132 
133 			TODO PHY-RF team: Is the description for this and the
134 			next 3 fields still correct ?
135 
136 
137 
138 			The PHY timestamp in the AMPI of the first rising edge
139 			of rx_clear_pri after TX_PHY_DESC. .  This field should set
140 			to 0 by the PHY and should be updated by the AMPI before
141 			being forwarded to the rest of the MAC. This field indicates
142 			the lower 32 bits of the timestamp
143 
144 phy_timestamp_1_upper_32
145 
146 			The PHY timestamp in the AMPI of the first rising edge
147 			of rx_clear_pri after TX_PHY_DESC.  This field should set to
148 			0 by the PHY and should be updated by the AMPI before being
149 			forwarded to the rest of the MAC. This field indicates the
150 			upper 32 bits of the timestamp
151 
152 phy_timestamp_2_lower_32
153 
154 			The PHY timestamp in the AMPI of the rising edge of
155 			rx_clear_pri after RX_RSSI_LEGACY.  This field should set to
156 			0 by the PHY and should be updated by the AMPI before being
157 			forwarded to the rest of the MAC. This field indicates the
158 			lower 32 bits of the timestamp
159 
160 phy_timestamp_2_upper_32
161 
162 			The PHY timestamp in the AMPI of the rising edge of
163 			rx_clear_pri after RX_RSSI_LEGACY.  This field should set to
164 			0 by the PHY and should be updated by the AMPI before being
165 			forwarded to the rest of the MAC. This field indicates the
166 			upper 32 bits of the timestamp
167 
168 struct rx_location_info rx_location_info_details
169 
170 			Overview of location related info
171 
172 struct rx_timing_offset_info rx_timing_offset_info_details
173 
174 			Overview of timing offset related info
175 
176 struct receive_rssi_info post_rssi_info_details
177 
178 			Overview of the post-RSSI values.
179 
180 phy_sw_status_31_0
181 
182 			Some PHY micro code status that can be put in here.
183 			Details of definition within SW specification
184 
185 			This field can be used for debugging, FW - SW message
186 			exchange, etc.
187 
188 			It could for example be a pointer to a DDR memory
189 			location where PHY FW put some debug info.
190 
191 			<legal all>
192 
193 phy_sw_status_63_32
194 
195 			Some PHY micro code status that can be put in here.
196 			Details of definition within SW specification
197 
198 			This field can be used for debugging, FW - SW message
199 			exchange, etc.
200 
201 			It could for example be a pointer to a DDR memory
202 			location where PHY FW put some debug info.
203 
204 			<legal all>
205 */
206 
207 
208 /* Description		PHYRX_PKT_END_0_PHY_INTERNAL_NAP
209 
210 			When set, PHY RX entered an internal NAP state, as PHY
211 			determined that this reception was not destined to this
212 			device
213 */
214 #define PHYRX_PKT_END_0_PHY_INTERNAL_NAP_OFFSET                      0x00000000
215 #define PHYRX_PKT_END_0_PHY_INTERNAL_NAP_LSB                         0
216 #define PHYRX_PKT_END_0_PHY_INTERNAL_NAP_MASK                        0x00000001
217 
218 /* Description		PHYRX_PKT_END_0_LOCATION_INFO_VALID
219 
220 			Indicates that the RX_LOCATION_INFO structure later on
221 			in the TLV contains valid info
222 */
223 #define PHYRX_PKT_END_0_LOCATION_INFO_VALID_OFFSET                   0x00000000
224 #define PHYRX_PKT_END_0_LOCATION_INFO_VALID_LSB                      1
225 #define PHYRX_PKT_END_0_LOCATION_INFO_VALID_MASK                     0x00000002
226 
227 /* Description		PHYRX_PKT_END_0_TIMING_INFO_VALID
228 
229 			Indicates that the RX_TIMING_OFFSET_INFO structure later
230 			on in the TLV contains valid info
231 */
232 #define PHYRX_PKT_END_0_TIMING_INFO_VALID_OFFSET                     0x00000000
233 #define PHYRX_PKT_END_0_TIMING_INFO_VALID_LSB                        2
234 #define PHYRX_PKT_END_0_TIMING_INFO_VALID_MASK                       0x00000004
235 
236 /* Description		PHYRX_PKT_END_0_RSSI_INFO_VALID
237 
238 			Indicates that the RECEIVE_RSSI_INFO structure later on
239 			in the TLV contains valid info
240 */
241 #define PHYRX_PKT_END_0_RSSI_INFO_VALID_OFFSET                       0x00000000
242 #define PHYRX_PKT_END_0_RSSI_INFO_VALID_LSB                          3
243 #define PHYRX_PKT_END_0_RSSI_INFO_VALID_MASK                         0x00000008
244 
245 /* Description		PHYRX_PKT_END_0_RX_FRAME_CORRECTION_NEEDED
246 
247 			When clear, no action is needed in the MAC.
248 
249 
250 
251 			When set, the falling edge of the rx_frame happened 4us
252 			too late. MAC will need to compensate for this delay in
253 			order to maintain proper SIFS timing and/or not to get
254 			de-slotted.
255 
256 
257 
258 			PHY uses this for very short 11a frames.
259 
260 
261 
262 			When set, PHY will have passed this TLV to the MAC up to
263 			8 us into the 'real SIFS' time, and thus within 4us from the
264 			falling edge of the rx_frame.
265 
266 
267 
268 			<legal all>
269 */
270 #define PHYRX_PKT_END_0_RX_FRAME_CORRECTION_NEEDED_OFFSET            0x00000000
271 #define PHYRX_PKT_END_0_RX_FRAME_CORRECTION_NEEDED_LSB               4
272 #define PHYRX_PKT_END_0_RX_FRAME_CORRECTION_NEEDED_MASK              0x00000010
273 
274 /* Description		PHYRX_PKT_END_0_FRAMELESS_FRAME_RECEIVED
275 
276 			When set, PHY has received the 'frameless frame' . Can
277 			be used in the 'MU-RTS -CTS exchange where CTS reception can
278 			be problematic.
279 
280 			<legal all>
281 */
282 #define PHYRX_PKT_END_0_FRAMELESS_FRAME_RECEIVED_OFFSET              0x00000000
283 #define PHYRX_PKT_END_0_FRAMELESS_FRAME_RECEIVED_LSB                 5
284 #define PHYRX_PKT_END_0_FRAMELESS_FRAME_RECEIVED_MASK                0x00000020
285 
286 /* Description		PHYRX_PKT_END_0_RESERVED_0A
287 
288 			<legal 0>
289 */
290 #define PHYRX_PKT_END_0_RESERVED_0A_OFFSET                           0x00000000
291 #define PHYRX_PKT_END_0_RESERVED_0A_LSB                              6
292 #define PHYRX_PKT_END_0_RESERVED_0A_MASK                             0xffffffc0
293 
294 /* Description		PHYRX_PKT_END_1_PHY_TIMESTAMP_1_LOWER_32
295 
296 			TODO PHY-RF team: Is the description for this and the
297 			next 3 fields still correct ?
298 
299 
300 
301 			The PHY timestamp in the AMPI of the first rising edge
302 			of rx_clear_pri after TX_PHY_DESC. .  This field should set
303 			to 0 by the PHY and should be updated by the AMPI before
304 			being forwarded to the rest of the MAC. This field indicates
305 			the lower 32 bits of the timestamp
306 */
307 #define PHYRX_PKT_END_1_PHY_TIMESTAMP_1_LOWER_32_OFFSET              0x00000004
308 #define PHYRX_PKT_END_1_PHY_TIMESTAMP_1_LOWER_32_LSB                 0
309 #define PHYRX_PKT_END_1_PHY_TIMESTAMP_1_LOWER_32_MASK                0xffffffff
310 
311 /* Description		PHYRX_PKT_END_2_PHY_TIMESTAMP_1_UPPER_32
312 
313 			The PHY timestamp in the AMPI of the first rising edge
314 			of rx_clear_pri after TX_PHY_DESC.  This field should set to
315 			0 by the PHY and should be updated by the AMPI before being
316 			forwarded to the rest of the MAC. This field indicates the
317 			upper 32 bits of the timestamp
318 */
319 #define PHYRX_PKT_END_2_PHY_TIMESTAMP_1_UPPER_32_OFFSET              0x00000008
320 #define PHYRX_PKT_END_2_PHY_TIMESTAMP_1_UPPER_32_LSB                 0
321 #define PHYRX_PKT_END_2_PHY_TIMESTAMP_1_UPPER_32_MASK                0xffffffff
322 
323 /* Description		PHYRX_PKT_END_3_PHY_TIMESTAMP_2_LOWER_32
324 
325 			The PHY timestamp in the AMPI of the rising edge of
326 			rx_clear_pri after RX_RSSI_LEGACY.  This field should set to
327 			0 by the PHY and should be updated by the AMPI before being
328 			forwarded to the rest of the MAC. This field indicates the
329 			lower 32 bits of the timestamp
330 */
331 #define PHYRX_PKT_END_3_PHY_TIMESTAMP_2_LOWER_32_OFFSET              0x0000000c
332 #define PHYRX_PKT_END_3_PHY_TIMESTAMP_2_LOWER_32_LSB                 0
333 #define PHYRX_PKT_END_3_PHY_TIMESTAMP_2_LOWER_32_MASK                0xffffffff
334 
335 /* Description		PHYRX_PKT_END_4_PHY_TIMESTAMP_2_UPPER_32
336 
337 			The PHY timestamp in the AMPI of the rising edge of
338 			rx_clear_pri after RX_RSSI_LEGACY.  This field should set to
339 			0 by the PHY and should be updated by the AMPI before being
340 			forwarded to the rest of the MAC. This field indicates the
341 			upper 32 bits of the timestamp
342 */
343 #define PHYRX_PKT_END_4_PHY_TIMESTAMP_2_UPPER_32_OFFSET              0x00000010
344 #define PHYRX_PKT_END_4_PHY_TIMESTAMP_2_UPPER_32_LSB                 0
345 #define PHYRX_PKT_END_4_PHY_TIMESTAMP_2_UPPER_32_MASK                0xffffffff
346 #define PHYRX_PKT_END_5_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_OFFSET 0x00000014
347 #define PHYRX_PKT_END_5_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_LSB 0
348 #define PHYRX_PKT_END_5_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_MASK 0xffffffff
349 #define PHYRX_PKT_END_6_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_OFFSET 0x00000018
350 #define PHYRX_PKT_END_6_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_LSB 0
351 #define PHYRX_PKT_END_6_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_MASK 0xffffffff
352 #define PHYRX_PKT_END_7_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_OFFSET 0x0000001c
353 #define PHYRX_PKT_END_7_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_LSB 0
354 #define PHYRX_PKT_END_7_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_MASK 0xffffffff
355 #define PHYRX_PKT_END_8_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_OFFSET 0x00000020
356 #define PHYRX_PKT_END_8_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_LSB 0
357 #define PHYRX_PKT_END_8_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_MASK 0xffffffff
358 #define PHYRX_PKT_END_9_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_OFFSET 0x00000024
359 #define PHYRX_PKT_END_9_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_LSB 0
360 #define PHYRX_PKT_END_9_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_MASK 0xffffffff
361 #define PHYRX_PKT_END_10_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_OFFSET 0x00000028
362 #define PHYRX_PKT_END_10_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_LSB 0
363 #define PHYRX_PKT_END_10_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_MASK 0xffffffff
364 #define PHYRX_PKT_END_11_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_OFFSET 0x0000002c
365 #define PHYRX_PKT_END_11_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_LSB 0
366 #define PHYRX_PKT_END_11_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_MASK 0xffffffff
367 #define PHYRX_PKT_END_12_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_OFFSET 0x00000030
368 #define PHYRX_PKT_END_12_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_LSB 0
369 #define PHYRX_PKT_END_12_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_MASK 0xffffffff
370 #define PHYRX_PKT_END_13_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_OFFSET 0x00000034
371 #define PHYRX_PKT_END_13_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_LSB 0
372 #define PHYRX_PKT_END_13_RX_LOCATION_INFO_RX_LOCATION_INFO_DETAILS_MASK 0xffffffff
373 #define PHYRX_PKT_END_14_RX_TIMING_OFFSET_INFO_RX_TIMING_OFFSET_INFO_DETAILS_OFFSET 0x00000038
374 #define PHYRX_PKT_END_14_RX_TIMING_OFFSET_INFO_RX_TIMING_OFFSET_INFO_DETAILS_LSB 0
375 #define PHYRX_PKT_END_14_RX_TIMING_OFFSET_INFO_RX_TIMING_OFFSET_INFO_DETAILS_MASK 0xffffffff
376 #define PHYRX_PKT_END_15_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x0000003c
377 #define PHYRX_PKT_END_15_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
378 #define PHYRX_PKT_END_15_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
379 #define PHYRX_PKT_END_16_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x00000040
380 #define PHYRX_PKT_END_16_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
381 #define PHYRX_PKT_END_16_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
382 #define PHYRX_PKT_END_17_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x00000044
383 #define PHYRX_PKT_END_17_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
384 #define PHYRX_PKT_END_17_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
385 #define PHYRX_PKT_END_18_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x00000048
386 #define PHYRX_PKT_END_18_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
387 #define PHYRX_PKT_END_18_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
388 #define PHYRX_PKT_END_19_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x0000004c
389 #define PHYRX_PKT_END_19_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
390 #define PHYRX_PKT_END_19_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
391 #define PHYRX_PKT_END_20_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x00000050
392 #define PHYRX_PKT_END_20_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
393 #define PHYRX_PKT_END_20_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
394 #define PHYRX_PKT_END_21_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x00000054
395 #define PHYRX_PKT_END_21_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
396 #define PHYRX_PKT_END_21_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
397 #define PHYRX_PKT_END_22_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x00000058
398 #define PHYRX_PKT_END_22_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
399 #define PHYRX_PKT_END_22_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
400 #define PHYRX_PKT_END_23_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x0000005c
401 #define PHYRX_PKT_END_23_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
402 #define PHYRX_PKT_END_23_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
403 #define PHYRX_PKT_END_24_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x00000060
404 #define PHYRX_PKT_END_24_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
405 #define PHYRX_PKT_END_24_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
406 #define PHYRX_PKT_END_25_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x00000064
407 #define PHYRX_PKT_END_25_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
408 #define PHYRX_PKT_END_25_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
409 #define PHYRX_PKT_END_26_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x00000068
410 #define PHYRX_PKT_END_26_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
411 #define PHYRX_PKT_END_26_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
412 #define PHYRX_PKT_END_27_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x0000006c
413 #define PHYRX_PKT_END_27_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
414 #define PHYRX_PKT_END_27_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
415 #define PHYRX_PKT_END_28_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x00000070
416 #define PHYRX_PKT_END_28_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
417 #define PHYRX_PKT_END_28_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
418 #define PHYRX_PKT_END_29_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x00000074
419 #define PHYRX_PKT_END_29_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
420 #define PHYRX_PKT_END_29_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
421 #define PHYRX_PKT_END_30_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_OFFSET 0x00000078
422 #define PHYRX_PKT_END_30_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_LSB 0
423 #define PHYRX_PKT_END_30_RECEIVE_RSSI_INFO_POST_RSSI_INFO_DETAILS_MASK 0xffffffff
424 
425 /* Description		PHYRX_PKT_END_31_PHY_SW_STATUS_31_0
426 
427 			Some PHY micro code status that can be put in here.
428 			Details of definition within SW specification
429 
430 			This field can be used for debugging, FW - SW message
431 			exchange, etc.
432 
433 			It could for example be a pointer to a DDR memory
434 			location where PHY FW put some debug info.
435 
436 			<legal all>
437 */
438 #define PHYRX_PKT_END_31_PHY_SW_STATUS_31_0_OFFSET                   0x0000007c
439 #define PHYRX_PKT_END_31_PHY_SW_STATUS_31_0_LSB                      0
440 #define PHYRX_PKT_END_31_PHY_SW_STATUS_31_0_MASK                     0xffffffff
441 
442 /* Description		PHYRX_PKT_END_32_PHY_SW_STATUS_63_32
443 
444 			Some PHY micro code status that can be put in here.
445 			Details of definition within SW specification
446 
447 			This field can be used for debugging, FW - SW message
448 			exchange, etc.
449 
450 			It could for example be a pointer to a DDR memory
451 			location where PHY FW put some debug info.
452 
453 			<legal all>
454 */
455 #define PHYRX_PKT_END_32_PHY_SW_STATUS_63_32_OFFSET                  0x00000080
456 #define PHYRX_PKT_END_32_PHY_SW_STATUS_63_32_LSB                     0
457 #define PHYRX_PKT_END_32_PHY_SW_STATUS_63_32_MASK                    0xffffffff
458 
459 
460 #endif // _PHYRX_PKT_END_H_
461