/wlan-driver/qcacld-3.0/core/wma/src/ ! |
H A D | wma_he.c | 102 wma_nofl_debug("ppet16 (nss:%d ru:%d): %04x", in wma_he_populate_ppet() 104 wma_nofl_debug("ppet8 (nss:%d ru:%d): %04x", in wma_he_populate_ppet() 550 …wma_nofl_debug(" Multi-TID aggr RX 0x%03x, Link adapt 0x%02x, All ACK 0x%01x, Trigg resp sched 0x%… in wma_print_he_cap() 556 …wma_nofl_debug(" MU Cascading 0x%01x, ACK enabled Multi-TID 0x%01x, OMI A-Cntrl 0x%01x, OFDMA RA 0… in wma_print_he_cap() 562 …wma_nofl_debug(" Rx Ctrl frame MBSS 0x%01x, BSRP A-MPDU Aggr 0x%01x, Quite Time Period 0x%01x, A-B… in wma_print_he_cap() 568 …wma_nofl_debug(" Amsdu in ampdu 0x%01x, Multi-TID aggr 0x%03x, sub ch sel tx 0x%01x, UL 2x996tone … in wma_print_he_cap() 581 …wma_nofl_debug(" Punctured sounding 0x%01x, HTVHT Trigg frame Rx 0x%01x, Chan width 0x%07x, Preamb… in wma_print_he_cap() 587 …wma_nofl_debug(" LTF and GI for HE PPDUs 0x%02x, Midamble Tx Rx MAX NSTS 0x%02x, LTF and GI for ND… in wma_print_he_cap() 593 …wma_nofl_debug(" STBC Rx support LE 80Mhz 0x%01x, Doppler 0x%02x, UL MU: 0x%02x, DCM encoding: Tx … in wma_print_he_cap() 598 …wma_nofl_debug(" SU: Bfer 0x%01x Bfee 0x%01x, MU Bfer 0x%01x, Bfee STS: LE 80Mhz 0x%03x GT 80Mhz … in wma_print_he_cap() [all …]
|
H A D | wma_eht.c | 503 …wma_nofl_debug(" TRS supp 0x%01x TXOP return support in TXOP M2 0x%01x Two BQRs supp 0x%01x EHT li… in wma_print_eht_cap() 511 …wma_nofl_debug(" Partial BW UL MU-MIMO: 0x%01x, SU: Bfer 0x%01x Bfee 0x%01x, Bfee SS: LE 80Mhz 0x%… in wma_print_eht_cap() 519 …wma_nofl_debug(" Ng 16: SU Feedback 0x%01x, MU Feedback 0x%01x Codebook: 4 2 SU: 0x%01x, 7 5 MU: 0… in wma_print_eht_cap() 527 …wma_nofl_debug(" PSR-Based SR 0x%01x, Power Boost Factor 0x%01x, MU PPDU With 4x EHT-LTF 0.8 us GI… in wma_print_eht_cap() 533 …wma_nofl_debug(" PPE Thresholds 0x%01x, Common Nominal Pkt Padding 0x%02x, Max No. Sup EHT-LTFs 0x… in wma_print_eht_cap() 539 …wma_nofl_debug(" Non-OFDMA ULMU: LE 80MHz 0x%01x 160MHz 0x%01x 320MHz 0x%01x, MUBfmer: LE 80MHz 0x… in wma_print_eht_cap() 548 …wma_nofl_debug(" 20 MHz-Only: Limited Cap 0x%01x Triggered MU Bfing Full BW FB, DL MU-MIMO 0x%01x … in wma_print_eht_cap() 556 …wma_nofl_debug(" 20MHz::: 10-11: RX: 0x%x TX: 0x%x, 12-13: RX: 0x%x TX: 0x%x, 80Mhz LE::: 0-9: RX:… in wma_print_eht_cap() 567 …wma_nofl_debug(" 160Mhz::: 0-9: RX: 0x%x TX: 0x%x, 10-11: RX: 0x%x TX: 0x%x, 12-13: RX: 0x%x TX: 0… in wma_print_eht_cap() 589 …wma_nofl_debug(" SU: Bfmer 0x%01x Bfmee 0x%01x, Bfmee SS: LE 80MHz 0x%03x 160MHz 0x%03x 320MHz 0x%… in wma_print_eht_phy_cap() [all …]
|
H A D | wma_main.c | 5558 wma_nofl_debug("ht_cap_info - %x ht_rx_stbc - %d, ht_tx_stbc - %d\n" in wma_update_target_ht_cap() 5624 wma_nofl_debug("max_mpdu %d supp_chan_width %x rx_ldpc %x\n" in wma_update_target_vht_cap() 5788 wma_nofl_debug("[ext ht cap] ht_rx_stbc - %d, ht_tx_stbc - %d\n" in wma_update_target_ext_ht_cap() 5966 wma_nofl_debug("[ext vhtcap] max_mpdu %d supp_chan_width %x rx_ldpc %x\n" in wma_update_target_ext_vht_cap() 7217 wma_nofl_debug("\t: index [%d]", index); in wma_print_mac_phy_capabilities() 7218 wma_nofl_debug("\t: cap for hw_mode_id[%d]", cap->hw_mode_id); in wma_print_mac_phy_capabilities() 7219 wma_nofl_debug("\t: pdev_id[%d]", cap->pdev_id); in wma_print_mac_phy_capabilities() 7220 wma_nofl_debug("\t: phy_id[%d]", cap->phy_id); in wma_print_mac_phy_capabilities() 7221 wma_nofl_debug("\t: hw_mode_config_type[%d]", cap->hw_mode_config_type); in wma_print_mac_phy_capabilities() 7222 wma_nofl_debug("\t: supports_11b[%d]", cap->supports_11b); in wma_print_mac_phy_capabilities() [all …]
|
H A D | wma_mgmt.c | 679 wma_nofl_debug("default WNI_CFG_RATE_FOR_TX_MGMT, ignore"); in wma_set_vdev_mgmt_rate() 695 wma_nofl_debug("use default 2G MGMT rate."); in wma_set_vdev_mgmt_rate() 709 wma_nofl_debug("use default 5G MGMT rate."); in wma_set_vdev_mgmt_rate() 1486 wma_nofl_debug("Peer phymode %d is not allowed. Set it equal to sap/go phymode %d", in wma_send_peer_assoc() 1583 wma_nofl_debug("Set WMI_PEER_APSD: uapsd Mask %d", in wma_send_peer_assoc() 1725 wma_nofl_debug("Num tx_streams: %d, Disabled txSTBC", in wma_send_peer_assoc() 1875 wma_nofl_debug("Updated protection mode %d to target", in wma_update_protection_mode() 1916 wma_nofl_debug("vdev: %d, update bss color, HE_OPS: 0x%x", in wma_update_bss_color() 2065 wma_nofl_debug("WMM params: %s", debug_str); in wma_process_update_edca_param_req() 2192 wma_nofl_debug("vdev %d: bcn update reason %d", vdev_id, in wma_unified_bcn_tmpl_send() [all …]
|
H A D | wma_features.c | 338 wma_nofl_debug("mac_id %d mac_id_valid %d tsf_id %d tsf_id_valid %d", in wma_vdev_tsf_set_mac_id_tsf_id() 384 wma_nofl_debug("receive WMI_VDEV_TSF_REPORT_EVENTID on %d, tsf: %d %d", in wma_vdev_tsf_handler() 387 wma_nofl_debug("g_tsf: %d %d; soc_timer: %d %d", in wma_vdev_tsf_handler() 2526 wma_nofl_debug("src addr %d:%d:%d:%d", ip_addr[0], ip_addr[1], in wma_log_pkt_ipv4() 2529 wma_nofl_debug("dst addr %d:%d:%d:%d", ip_addr[0], ip_addr[1], in wma_log_pkt_ipv4() 2549 wma_nofl_debug("src addr "IPV6_ADDR_STR, ip_addr[0], in wma_log_pkt_ipv6() 2556 wma_nofl_debug("dst addr "IPV6_ADDR_STR, ip_addr[0], in wma_log_pkt_ipv6() 5989 wma_nofl_debug("aggr_index: %d\tstart_seq: %d\tend_seq: %d\t" in wma_rx_aggr_failure_event_handler() 6093 wma_nofl_debug("chain_rssi: %d, chain_evm: %d,ant_id: %d", in wma_pdev_div_info_evt_handler()
|
H A D | wma_power.c | 308 wma_nofl_debug("TXP[W][set_tx_pwr]: %d", tx_pwr_params->power); in wma_set_tx_power() 388 wma_nofl_debug("TXP[W][set_max_pwr_req]: %d", max_tx_power); in wma_set_max_tx_power()
|
H A D | wma_data.c | 1793 wma_nofl_debug("Throttle Duty Cycle Level in percentage:\n" in wma_process_init_thermal_info() 1835 wma_nofl_debug("TM level min max:\n" in wma_process_init_thermal_info()
|
H A D | wma_scan_roam.c | 3128 wma_nofl_debug("Ch[%d]: %d ", i, channel_list[i]); in wma_send_ht40_obss_scanind() 3146 wma_nofl_debug("freq[%u]: %u ", i, chan_freq_list[i]); in wma_send_ht40_obss_scanind()
|
H A D | wma_dev_if.c | 4193 wma_nofl_debug("TXP[W][set_bss_params]: %d", maxTxPower); in wma_vdev_set_bss_params() 6484 wma_nofl_debug("default WNI_CFG_RATE_FOR_TX_MGMT, ignore"); in wma_vdev_mgmt_tx_rate() 6516 wma_nofl_debug("use default 2G MGMT rate."); in wma_vdev_mgmt_perband_tx_rate() 6530 wma_nofl_debug("use default 5G MGMT rate."); in wma_vdev_mgmt_perband_tx_rate()
|
H A D | wma_utils.c | 2371 wma_nofl_debug("LL Stats per channel tx time and rx time are not supported."); in __wma_unified_link_radio_stats_event_handler() 2571 wma_nofl_debug("MAC address: %2x:%2x:%2x:%2x:%2x:%2x, Power state: %d", in wma_peer_ps_evt_handler()
|
/wlan-driver/qcacld-3.0/core/wma/inc/ ! |
H A D | wma.h | 94 #define wma_nofl_debug(params...) \ macro
|
/wlan-driver/qcacld-3.0/core/hdd/src/ ! |
H A D | wlan_hdd_main.c | 8252 wma_nofl_debug("TXP[W][send_coex_cfg]: %d", in hdd_send_coex_config_params() 8403 wma_nofl_debug("TXP[W][send_coex_cfg]: %d", in hdd_send_coex_config_params()
|