1 /*
2 * Copyright (c) 2008-2009 Atheros Communications Inc.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 *
18 */
19
20
21 #include <linux/module.h>
22 #include <linux/kernel.h>
23 #include <linux/init.h>
24 #include <linux/slab.h>
25 #include <linux/types.h>
26 #include <linux/errno.h>
27 #include <linux/device.h>
28 #include <linux/firmware.h>
29 #include <linux/usb.h>
30 #include <asm/unaligned.h>
31 #include <net/bluetooth/bluetooth.h>
32
33 #define VERSION "1.0"
34 #define ATH3K_FIRMWARE "ath3k-1.fw"
35
36 #define ATH3K_DNLOAD 0x01
37 #define ATH3K_GETSTATE 0x05
38 #define ATH3K_SET_NORMAL_MODE 0x07
39 #define ATH3K_GETVERSION 0x09
40 #define USB_REG_SWITCH_VID_PID 0x0a
41
42 #define ATH3K_MODE_MASK 0x3F
43 #define ATH3K_NORMAL_MODE 0x0E
44
45 #define ATH3K_PATCH_UPDATE 0x80
46 #define ATH3K_SYSCFG_UPDATE 0x40
47
48 #define ATH3K_XTAL_FREQ_26M 0x00
49 #define ATH3K_XTAL_FREQ_40M 0x01
50 #define ATH3K_XTAL_FREQ_19P2 0x02
51 #define ATH3K_NAME_LEN 0xFF
52
53 struct ath3k_version {
54 __le32 rom_version;
55 __le32 build_version;
56 __le32 ram_version;
57 __u8 ref_clock;
58 __u8 reserved[7];
59 } __packed;
60
61 static const struct usb_device_id ath3k_table[] = {
62 /* Atheros AR3011 */
63 { USB_DEVICE(0x0CF3, 0x3000) },
64
65 /* Atheros AR3011 with sflash firmware*/
66 { USB_DEVICE(0x0489, 0xE027) },
67 { USB_DEVICE(0x0489, 0xE03D) },
68 { USB_DEVICE(0x04F2, 0xAFF1) },
69 { USB_DEVICE(0x0930, 0x0215) },
70 { USB_DEVICE(0x0CF3, 0x3002) },
71 { USB_DEVICE(0x0CF3, 0xE019) },
72 { USB_DEVICE(0x13d3, 0x3304) },
73
74 /* Atheros AR9285 Malbec with sflash firmware */
75 { USB_DEVICE(0x03F0, 0x311D) },
76
77 /* Atheros AR3012 with sflash firmware*/
78 { USB_DEVICE(0x0489, 0xe04d) },
79 { USB_DEVICE(0x0489, 0xe04e) },
80 { USB_DEVICE(0x0489, 0xe057) },
81 { USB_DEVICE(0x0489, 0xe056) },
82 { USB_DEVICE(0x0489, 0xe05f) },
83 { USB_DEVICE(0x0489, 0xe076) },
84 { USB_DEVICE(0x0489, 0xe078) },
85 { USB_DEVICE(0x0489, 0xe095) },
86 { USB_DEVICE(0x04c5, 0x1330) },
87 { USB_DEVICE(0x04CA, 0x3004) },
88 { USB_DEVICE(0x04CA, 0x3005) },
89 { USB_DEVICE(0x04CA, 0x3006) },
90 { USB_DEVICE(0x04CA, 0x3007) },
91 { USB_DEVICE(0x04CA, 0x3008) },
92 { USB_DEVICE(0x04CA, 0x300b) },
93 { USB_DEVICE(0x04CA, 0x300d) },
94 { USB_DEVICE(0x04CA, 0x300f) },
95 { USB_DEVICE(0x04CA, 0x3010) },
96 { USB_DEVICE(0x04CA, 0x3014) },
97 { USB_DEVICE(0x04CA, 0x3018) },
98 { USB_DEVICE(0x0930, 0x0219) },
99 { USB_DEVICE(0x0930, 0x021c) },
100 { USB_DEVICE(0x0930, 0x0220) },
101 { USB_DEVICE(0x0930, 0x0227) },
102 { USB_DEVICE(0x0b05, 0x17d0) },
103 { USB_DEVICE(0x0CF3, 0x0036) },
104 { USB_DEVICE(0x0CF3, 0x3004) },
105 { USB_DEVICE(0x0CF3, 0x3008) },
106 { USB_DEVICE(0x0CF3, 0x311D) },
107 { USB_DEVICE(0x0CF3, 0x311E) },
108 { USB_DEVICE(0x0CF3, 0x311F) },
109 { USB_DEVICE(0x0cf3, 0x3121) },
110 { USB_DEVICE(0x0CF3, 0x817a) },
111 { USB_DEVICE(0x0CF3, 0x817b) },
112 { USB_DEVICE(0x0cf3, 0xe003) },
113 { USB_DEVICE(0x0CF3, 0xE004) },
114 { USB_DEVICE(0x0CF3, 0xE005) },
115 { USB_DEVICE(0x0CF3, 0xE006) },
116 { USB_DEVICE(0x13d3, 0x3362) },
117 { USB_DEVICE(0x13d3, 0x3375) },
118 { USB_DEVICE(0x13d3, 0x3393) },
119 { USB_DEVICE(0x13d3, 0x3395) },
120 { USB_DEVICE(0x13d3, 0x3402) },
121 { USB_DEVICE(0x13d3, 0x3408) },
122 { USB_DEVICE(0x13d3, 0x3423) },
123 { USB_DEVICE(0x13d3, 0x3432) },
124 { USB_DEVICE(0x13d3, 0x3472) },
125 { USB_DEVICE(0x13d3, 0x3474) },
126 { USB_DEVICE(0x13d3, 0x3487) },
127 { USB_DEVICE(0x13d3, 0x3490) },
128
129 /* Atheros AR5BBU12 with sflash firmware */
130 { USB_DEVICE(0x0489, 0xE02C) },
131
132 /* Atheros AR5BBU22 with sflash firmware */
133 { USB_DEVICE(0x0489, 0xE036) },
134 { USB_DEVICE(0x0489, 0xE03C) },
135
136 { } /* Terminating entry */
137 };
138
139 MODULE_DEVICE_TABLE(usb, ath3k_table);
140
141 #define BTUSB_ATH3012 0x80
142 /* This table is to load patch and sysconfig files
143 * for AR3012
144 */
145 static const struct usb_device_id ath3k_blist_tbl[] = {
146
147 /* Atheros AR3012 with sflash firmware*/
148 { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
149 { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
150 { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
151 { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
152 { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
153 { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
154 { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
155 { USB_DEVICE(0x0489, 0xe095), .driver_info = BTUSB_ATH3012 },
156 { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
157 { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
158 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
159 { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
160 { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
161 { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
162 { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
163 { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
164 { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
165 { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
166 { USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
167 { USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 },
168 { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
169 { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
170 { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
171 { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
172 { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
173 { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
174 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
175 { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
176 { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
177 { USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },
178 { USB_DEVICE(0x0cf3, 0x311F), .driver_info = BTUSB_ATH3012 },
179 { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
180 { USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
181 { USB_DEVICE(0x0CF3, 0x817b), .driver_info = BTUSB_ATH3012 },
182 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
183 { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
184 { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
185 { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
186 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
187 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
188 { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
189 { USB_DEVICE(0x13d3, 0x3395), .driver_info = BTUSB_ATH3012 },
190 { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
191 { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
192 { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
193 { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
194 { USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
195 { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
196 { USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 },
197 { USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 },
198
199 /* Atheros AR5BBU22 with sflash firmware */
200 { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
201 { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
202
203 { } /* Terminating entry */
204 };
205
ath3k_log_failed_loading(int err,int len,int size)206 static inline void ath3k_log_failed_loading(int err, int len, int size)
207 {
208 BT_ERR("Error in firmware loading err = %d, len = %d, size = %d",
209 err, len, size);
210 }
211
212 #define USB_REQ_DFU_DNLOAD 1
213 #define BULK_SIZE 4096
214 #define FW_HDR_SIZE 20
215 #define TIMEGAP_USEC_MIN 50
216 #define TIMEGAP_USEC_MAX 100
217
ath3k_load_firmware(struct usb_device * udev,const struct firmware * firmware)218 static int ath3k_load_firmware(struct usb_device *udev,
219 const struct firmware *firmware)
220 {
221 u8 *send_buf;
222 int len = 0;
223 int err, pipe, size, sent = 0;
224 int count = firmware->size;
225
226 BT_DBG("udev %p", udev);
227
228 pipe = usb_sndctrlpipe(udev, 0);
229
230 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
231 if (!send_buf) {
232 BT_ERR("Can't allocate memory chunk for firmware");
233 return -ENOMEM;
234 }
235
236 memcpy(send_buf, firmware->data, FW_HDR_SIZE);
237 err = usb_control_msg(udev, pipe, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR,
238 0, 0, send_buf, FW_HDR_SIZE,
239 USB_CTRL_SET_TIMEOUT);
240 if (err < 0) {
241 BT_ERR("Can't change to loading configuration err");
242 goto error;
243 }
244 sent += FW_HDR_SIZE;
245 count -= FW_HDR_SIZE;
246
247 pipe = usb_sndbulkpipe(udev, 0x02);
248
249 while (count) {
250 /* workaround the compatibility issue with xHCI controller*/
251 usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX);
252
253 size = min_t(uint, count, BULK_SIZE);
254 memcpy(send_buf, firmware->data + sent, size);
255
256 err = usb_bulk_msg(udev, pipe, send_buf, size,
257 &len, 3000);
258
259 if (err || (len != size)) {
260 ath3k_log_failed_loading(err, len, size);
261 goto error;
262 }
263
264 sent += size;
265 count -= size;
266 }
267
268 error:
269 kfree(send_buf);
270 return err;
271 }
272
ath3k_get_state(struct usb_device * udev,unsigned char * state)273 static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
274 {
275 int ret, pipe = 0;
276 char *buf;
277
278 buf = kmalloc(sizeof(*buf), GFP_KERNEL);
279 if (!buf)
280 return -ENOMEM;
281
282 pipe = usb_rcvctrlpipe(udev, 0);
283 ret = usb_control_msg(udev, pipe, ATH3K_GETSTATE,
284 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
285 buf, sizeof(*buf), USB_CTRL_SET_TIMEOUT);
286
287 *state = *buf;
288 kfree(buf);
289
290 return ret;
291 }
292
ath3k_get_version(struct usb_device * udev,struct ath3k_version * version)293 static int ath3k_get_version(struct usb_device *udev,
294 struct ath3k_version *version)
295 {
296 int ret, pipe = 0;
297 struct ath3k_version *buf;
298 const int size = sizeof(*buf);
299
300 buf = kmalloc(size, GFP_KERNEL);
301 if (!buf)
302 return -ENOMEM;
303
304 pipe = usb_rcvctrlpipe(udev, 0);
305 ret = usb_control_msg(udev, pipe, ATH3K_GETVERSION,
306 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
307 buf, size, USB_CTRL_SET_TIMEOUT);
308
309 memcpy(version, buf, size);
310 kfree(buf);
311
312 return ret;
313 }
314
ath3k_load_fwfile(struct usb_device * udev,const struct firmware * firmware)315 static int ath3k_load_fwfile(struct usb_device *udev,
316 const struct firmware *firmware)
317 {
318 u8 *send_buf;
319 int len = 0;
320 int err, pipe, size, count, sent = 0;
321 int ret;
322
323 count = firmware->size;
324
325 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
326 if (!send_buf) {
327 BT_ERR("Can't allocate memory chunk for firmware");
328 return -ENOMEM;
329 }
330
331 size = min_t(uint, count, FW_HDR_SIZE);
332 memcpy(send_buf, firmware->data, size);
333
334 pipe = usb_sndctrlpipe(udev, 0);
335 ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD,
336 USB_TYPE_VENDOR, 0, 0, send_buf,
337 size, USB_CTRL_SET_TIMEOUT);
338 if (ret < 0) {
339 BT_ERR("Can't change to loading configuration err");
340 kfree(send_buf);
341 return ret;
342 }
343
344 sent += size;
345 count -= size;
346
347 pipe = usb_sndbulkpipe(udev, 0x02);
348
349 while (count) {
350 /* workaround the compatibility issue with xHCI controller*/
351 usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX);
352
353 size = min_t(uint, count, BULK_SIZE);
354 memcpy(send_buf, firmware->data + sent, size);
355
356 err = usb_bulk_msg(udev, pipe, send_buf, size,
357 &len, 3000);
358 if (err || (len != size)) {
359 ath3k_log_failed_loading(err, len, size);
360 kfree(send_buf);
361 return err;
362 }
363 sent += size;
364 count -= size;
365 }
366
367 kfree(send_buf);
368 return 0;
369 }
370
ath3k_switch_pid(struct usb_device * udev)371 static int ath3k_switch_pid(struct usb_device *udev)
372 {
373 int pipe = 0;
374
375 pipe = usb_sndctrlpipe(udev, 0);
376 return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID,
377 USB_TYPE_VENDOR, 0, 0,
378 NULL, 0, USB_CTRL_SET_TIMEOUT);
379 }
380
ath3k_set_normal_mode(struct usb_device * udev)381 static int ath3k_set_normal_mode(struct usb_device *udev)
382 {
383 unsigned char fw_state;
384 int pipe = 0, ret;
385
386 ret = ath3k_get_state(udev, &fw_state);
387 if (ret < 0) {
388 BT_ERR("Can't get state to change to normal mode err");
389 return ret;
390 }
391
392 if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
393 BT_DBG("firmware was already in normal mode");
394 return 0;
395 }
396
397 pipe = usb_sndctrlpipe(udev, 0);
398 return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE,
399 USB_TYPE_VENDOR, 0, 0,
400 NULL, 0, USB_CTRL_SET_TIMEOUT);
401 }
402
ath3k_load_patch(struct usb_device * udev)403 static int ath3k_load_patch(struct usb_device *udev)
404 {
405 unsigned char fw_state;
406 char filename[ATH3K_NAME_LEN];
407 const struct firmware *firmware;
408 struct ath3k_version fw_version;
409 __u32 pt_rom_version, pt_build_version;
410 int ret;
411
412 ret = ath3k_get_state(udev, &fw_state);
413 if (ret < 0) {
414 BT_ERR("Can't get state to change to load ram patch err");
415 return ret;
416 }
417
418 if (fw_state & ATH3K_PATCH_UPDATE) {
419 BT_DBG("Patch was already downloaded");
420 return 0;
421 }
422
423 ret = ath3k_get_version(udev, &fw_version);
424 if (ret < 0) {
425 BT_ERR("Can't get version to change to load ram patch err");
426 return ret;
427 }
428
429 snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
430 le32_to_cpu(fw_version.rom_version));
431
432 ret = request_firmware(&firmware, filename, &udev->dev);
433 if (ret < 0) {
434 BT_ERR("Patch file not found %s", filename);
435 return ret;
436 }
437
438 pt_rom_version = get_unaligned_le32(firmware->data +
439 firmware->size - 8);
440 pt_build_version = get_unaligned_le32(firmware->data +
441 firmware->size - 4);
442
443 if (pt_rom_version != le32_to_cpu(fw_version.rom_version) ||
444 pt_build_version <= le32_to_cpu(fw_version.build_version)) {
445 BT_ERR("Patch file version did not match with firmware");
446 release_firmware(firmware);
447 return -EINVAL;
448 }
449
450 ret = ath3k_load_fwfile(udev, firmware);
451 release_firmware(firmware);
452
453 return ret;
454 }
455
ath3k_load_syscfg(struct usb_device * udev)456 static int ath3k_load_syscfg(struct usb_device *udev)
457 {
458 unsigned char fw_state;
459 char filename[ATH3K_NAME_LEN];
460 const struct firmware *firmware;
461 struct ath3k_version fw_version;
462 int clk_value, ret;
463
464 ret = ath3k_get_state(udev, &fw_state);
465 if (ret < 0) {
466 BT_ERR("Can't get state to change to load configuration err");
467 return -EBUSY;
468 }
469
470 ret = ath3k_get_version(udev, &fw_version);
471 if (ret < 0) {
472 BT_ERR("Can't get version to change to load ram patch err");
473 return ret;
474 }
475
476 switch (fw_version.ref_clock) {
477
478 case ATH3K_XTAL_FREQ_26M:
479 clk_value = 26;
480 break;
481 case ATH3K_XTAL_FREQ_40M:
482 clk_value = 40;
483 break;
484 case ATH3K_XTAL_FREQ_19P2:
485 clk_value = 19;
486 break;
487 default:
488 clk_value = 0;
489 break;
490 }
491
492 snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
493 le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
494
495 ret = request_firmware(&firmware, filename, &udev->dev);
496 if (ret < 0) {
497 BT_ERR("Configuration file not found %s", filename);
498 return ret;
499 }
500
501 ret = ath3k_load_fwfile(udev, firmware);
502 release_firmware(firmware);
503
504 return ret;
505 }
506
ath3k_probe(struct usb_interface * intf,const struct usb_device_id * id)507 static int ath3k_probe(struct usb_interface *intf,
508 const struct usb_device_id *id)
509 {
510 const struct firmware *firmware;
511 struct usb_device *udev = interface_to_usbdev(intf);
512 int ret;
513
514 BT_DBG("intf %p id %p", intf, id);
515
516 if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
517 return -ENODEV;
518
519 /* match device ID in ath3k blacklist table */
520 if (!id->driver_info) {
521 const struct usb_device_id *match;
522
523 match = usb_match_id(intf, ath3k_blist_tbl);
524 if (match)
525 id = match;
526 }
527
528 /* load patch and sysconfig files for AR3012 */
529 if (id->driver_info & BTUSB_ATH3012) {
530 /* New firmware with patch and sysconfig files already loaded */
531 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
532 return -ENODEV;
533
534 ret = ath3k_load_patch(udev);
535 if (ret < 0) {
536 BT_ERR("Loading patch file failed");
537 return ret;
538 }
539 ret = ath3k_load_syscfg(udev);
540 if (ret < 0) {
541 BT_ERR("Loading sysconfig file failed");
542 return ret;
543 }
544 ret = ath3k_set_normal_mode(udev);
545 if (ret < 0) {
546 BT_ERR("Set normal mode failed");
547 return ret;
548 }
549 ath3k_switch_pid(udev);
550 return 0;
551 }
552
553 ret = request_firmware(&firmware, ATH3K_FIRMWARE, &udev->dev);
554 if (ret < 0) {
555 if (ret == -ENOENT)
556 BT_ERR("Firmware file \"%s\" not found",
557 ATH3K_FIRMWARE);
558 else
559 BT_ERR("Firmware file \"%s\" request failed (err=%d)",
560 ATH3K_FIRMWARE, ret);
561 return ret;
562 }
563
564 ret = ath3k_load_firmware(udev, firmware);
565 release_firmware(firmware);
566
567 return ret;
568 }
569
ath3k_disconnect(struct usb_interface * intf)570 static void ath3k_disconnect(struct usb_interface *intf)
571 {
572 BT_DBG("%s intf %p", __func__, intf);
573 }
574
575 static struct usb_driver ath3k_driver = {
576 .name = "ath3k",
577 .probe = ath3k_probe,
578 .disconnect = ath3k_disconnect,
579 .id_table = ath3k_table,
580 .disable_hub_initiated_lpm = 1,
581 };
582
583 module_usb_driver(ath3k_driver);
584
585 MODULE_AUTHOR("Atheros Communications");
586 MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
587 MODULE_VERSION(VERSION);
588 MODULE_LICENSE("GPL");
589 MODULE_FIRMWARE(ATH3K_FIRMWARE);
590