1 /*
2 *
3 * mwavedd.c -- mwave device driver
4 *
5 *
6 * Written By: Mike Sullivan IBM Corporation
7 *
8 * Copyright (C) 1999 IBM Corporation
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * NO WARRANTY
21 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
22 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
23 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
24 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
25 * solely responsible for determining the appropriateness of using and
26 * distributing the Program and assumes all risks associated with its
27 * exercise of rights under this Agreement, including but not limited to
28 * the risks and costs of program errors, damage to or loss of data,
29 * programs or equipment, and unavailability or interruption of operations.
30 *
31 * DISCLAIMER OF LIABILITY
32 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
33 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
34 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
35 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
36 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
37 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
38 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39 *
40 * You should have received a copy of the GNU General Public License
41 * along with this program; if not, write to the Free Software
42 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
43 *
44 *
45 * 10/23/2000 - Alpha Release
46 * First release to the public
47 */
48
49 #include <linux/module.h>
50 #include <linux/kernel.h>
51 #include <linux/fs.h>
52 #include <linux/init.h>
53 #include <linux/major.h>
54 #include <linux/miscdevice.h>
55 #include <linux/device.h>
56 #include <linux/serial.h>
57 #include <linux/sched.h>
58 #include <linux/spinlock.h>
59 #include <linux/mutex.h>
60 #include <linux/delay.h>
61 #include <linux/serial_8250.h>
62 #include <linux/nospec.h>
63 #include "smapi.h"
64 #include "mwavedd.h"
65 #include "3780i.h"
66 #include "tp3780i.h"
67
68 MODULE_DESCRIPTION("3780i Advanced Communications Processor (Mwave) driver");
69 MODULE_AUTHOR("Mike Sullivan and Paul Schroeder");
70 MODULE_LICENSE("GPL");
71
72 /*
73 * These parameters support the setting of MWave resources. Note that no
74 * checks are made against other devices (ie. superio) for conflicts.
75 * We'll depend on users using the tpctl utility to do that for now
76 */
77 static DEFINE_MUTEX(mwave_mutex);
78 int mwave_debug = 0;
79 int mwave_3780i_irq = 0;
80 int mwave_3780i_io = 0;
81 int mwave_uart_irq = 0;
82 int mwave_uart_io = 0;
83 module_param(mwave_debug, int, 0);
84 module_param_hw(mwave_3780i_irq, int, irq, 0);
85 module_param_hw(mwave_3780i_io, int, ioport, 0);
86 module_param_hw(mwave_uart_irq, int, irq, 0);
87 module_param_hw(mwave_uart_io, int, ioport, 0);
88
89 static int mwave_open(struct inode *inode, struct file *file);
90 static int mwave_close(struct inode *inode, struct file *file);
91 static long mwave_ioctl(struct file *filp, unsigned int iocmd,
92 unsigned long ioarg);
93
94 MWAVE_DEVICE_DATA mwave_s_mdd;
95
mwave_open(struct inode * inode,struct file * file)96 static int mwave_open(struct inode *inode, struct file *file)
97 {
98 unsigned int retval = 0;
99
100 PRINTK_3(TRACE_MWAVE,
101 "mwavedd::mwave_open, entry inode %p file %p\n",
102 inode, file);
103 PRINTK_2(TRACE_MWAVE,
104 "mwavedd::mwave_open, exit return retval %x\n", retval);
105
106 return retval;
107 }
108
mwave_close(struct inode * inode,struct file * file)109 static int mwave_close(struct inode *inode, struct file *file)
110 {
111 unsigned int retval = 0;
112
113 PRINTK_3(TRACE_MWAVE,
114 "mwavedd::mwave_close, entry inode %p file %p\n",
115 inode, file);
116
117 PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_close, exit retval %x\n",
118 retval);
119
120 return retval;
121 }
122
mwave_ioctl(struct file * file,unsigned int iocmd,unsigned long ioarg)123 static long mwave_ioctl(struct file *file, unsigned int iocmd,
124 unsigned long ioarg)
125 {
126 unsigned int retval = 0;
127 pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
128 void __user *arg = (void __user *)ioarg;
129
130 PRINTK_4(TRACE_MWAVE,
131 "mwavedd::mwave_ioctl, entry file %p cmd %x arg %x\n",
132 file, iocmd, (int) ioarg);
133
134 switch (iocmd) {
135
136 case IOCTL_MW_RESET:
137 PRINTK_1(TRACE_MWAVE,
138 "mwavedd::mwave_ioctl, IOCTL_MW_RESET"
139 " calling tp3780I_ResetDSP\n");
140 mutex_lock(&mwave_mutex);
141 retval = tp3780I_ResetDSP(&pDrvData->rBDData);
142 mutex_unlock(&mwave_mutex);
143 PRINTK_2(TRACE_MWAVE,
144 "mwavedd::mwave_ioctl, IOCTL_MW_RESET"
145 " retval %x from tp3780I_ResetDSP\n",
146 retval);
147 break;
148
149 case IOCTL_MW_RUN:
150 PRINTK_1(TRACE_MWAVE,
151 "mwavedd::mwave_ioctl, IOCTL_MW_RUN"
152 " calling tp3780I_StartDSP\n");
153 mutex_lock(&mwave_mutex);
154 retval = tp3780I_StartDSP(&pDrvData->rBDData);
155 mutex_unlock(&mwave_mutex);
156 PRINTK_2(TRACE_MWAVE,
157 "mwavedd::mwave_ioctl, IOCTL_MW_RUN"
158 " retval %x from tp3780I_StartDSP\n",
159 retval);
160 break;
161
162 case IOCTL_MW_DSP_ABILITIES: {
163 MW_ABILITIES rAbilities;
164
165 PRINTK_1(TRACE_MWAVE,
166 "mwavedd::mwave_ioctl,"
167 " IOCTL_MW_DSP_ABILITIES calling"
168 " tp3780I_QueryAbilities\n");
169 mutex_lock(&mwave_mutex);
170 retval = tp3780I_QueryAbilities(&pDrvData->rBDData,
171 &rAbilities);
172 mutex_unlock(&mwave_mutex);
173 PRINTK_2(TRACE_MWAVE,
174 "mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES"
175 " retval %x from tp3780I_QueryAbilities\n",
176 retval);
177 if (retval == 0) {
178 if( copy_to_user(arg, &rAbilities,
179 sizeof(MW_ABILITIES)) )
180 return -EFAULT;
181 }
182 PRINTK_2(TRACE_MWAVE,
183 "mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES"
184 " exit retval %x\n",
185 retval);
186 }
187 break;
188
189 case IOCTL_MW_READ_DATA:
190 case IOCTL_MW_READCLEAR_DATA: {
191 MW_READWRITE rReadData;
192 unsigned short __user *pusBuffer = NULL;
193
194 if( copy_from_user(&rReadData, arg,
195 sizeof(MW_READWRITE)) )
196 return -EFAULT;
197 pusBuffer = (unsigned short __user *) (rReadData.pBuf);
198
199 PRINTK_4(TRACE_MWAVE,
200 "mwavedd::mwave_ioctl IOCTL_MW_READ_DATA,"
201 " size %lx, ioarg %lx pusBuffer %p\n",
202 rReadData.ulDataLength, ioarg, pusBuffer);
203 mutex_lock(&mwave_mutex);
204 retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
205 iocmd,
206 pusBuffer,
207 rReadData.ulDataLength,
208 rReadData.usDspAddress);
209 mutex_unlock(&mwave_mutex);
210 }
211 break;
212
213 case IOCTL_MW_READ_INST: {
214 MW_READWRITE rReadData;
215 unsigned short __user *pusBuffer = NULL;
216
217 if( copy_from_user(&rReadData, arg,
218 sizeof(MW_READWRITE)) )
219 return -EFAULT;
220 pusBuffer = (unsigned short __user *) (rReadData.pBuf);
221
222 PRINTK_4(TRACE_MWAVE,
223 "mwavedd::mwave_ioctl IOCTL_MW_READ_INST,"
224 " size %lx, ioarg %lx pusBuffer %p\n",
225 rReadData.ulDataLength / 2, ioarg,
226 pusBuffer);
227 mutex_lock(&mwave_mutex);
228 retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
229 iocmd, pusBuffer,
230 rReadData.ulDataLength / 2,
231 rReadData.usDspAddress);
232 mutex_unlock(&mwave_mutex);
233 }
234 break;
235
236 case IOCTL_MW_WRITE_DATA: {
237 MW_READWRITE rWriteData;
238 unsigned short __user *pusBuffer = NULL;
239
240 if( copy_from_user(&rWriteData, arg,
241 sizeof(MW_READWRITE)) )
242 return -EFAULT;
243 pusBuffer = (unsigned short __user *) (rWriteData.pBuf);
244
245 PRINTK_4(TRACE_MWAVE,
246 "mwavedd::mwave_ioctl IOCTL_MW_WRITE_DATA,"
247 " size %lx, ioarg %lx pusBuffer %p\n",
248 rWriteData.ulDataLength, ioarg,
249 pusBuffer);
250 mutex_lock(&mwave_mutex);
251 retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
252 iocmd, pusBuffer,
253 rWriteData.ulDataLength,
254 rWriteData.usDspAddress);
255 mutex_unlock(&mwave_mutex);
256 }
257 break;
258
259 case IOCTL_MW_WRITE_INST: {
260 MW_READWRITE rWriteData;
261 unsigned short __user *pusBuffer = NULL;
262
263 if( copy_from_user(&rWriteData, arg,
264 sizeof(MW_READWRITE)) )
265 return -EFAULT;
266 pusBuffer = (unsigned short __user *)(rWriteData.pBuf);
267
268 PRINTK_4(TRACE_MWAVE,
269 "mwavedd::mwave_ioctl IOCTL_MW_WRITE_INST,"
270 " size %lx, ioarg %lx pusBuffer %p\n",
271 rWriteData.ulDataLength, ioarg,
272 pusBuffer);
273 mutex_lock(&mwave_mutex);
274 retval = tp3780I_ReadWriteDspIStore(&pDrvData->rBDData,
275 iocmd, pusBuffer,
276 rWriteData.ulDataLength,
277 rWriteData.usDspAddress);
278 mutex_unlock(&mwave_mutex);
279 }
280 break;
281
282 case IOCTL_MW_REGISTER_IPC: {
283 unsigned int ipcnum = (unsigned int) ioarg;
284
285 if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
286 PRINTK_ERROR(KERN_ERR_MWAVE
287 "mwavedd::mwave_ioctl:"
288 " IOCTL_MW_REGISTER_IPC:"
289 " Error: Invalid ipcnum %x\n",
290 ipcnum);
291 return -EINVAL;
292 }
293 ipcnum = array_index_nospec(ipcnum,
294 ARRAY_SIZE(pDrvData->IPCs));
295 PRINTK_3(TRACE_MWAVE,
296 "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
297 " ipcnum %x entry usIntCount %x\n",
298 ipcnum,
299 pDrvData->IPCs[ipcnum].usIntCount);
300
301 mutex_lock(&mwave_mutex);
302 pDrvData->IPCs[ipcnum].bIsHere = false;
303 pDrvData->IPCs[ipcnum].bIsEnabled = true;
304 mutex_unlock(&mwave_mutex);
305
306 PRINTK_2(TRACE_MWAVE,
307 "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
308 " ipcnum %x exit\n",
309 ipcnum);
310 }
311 break;
312
313 case IOCTL_MW_GET_IPC: {
314 unsigned int ipcnum = (unsigned int) ioarg;
315
316 if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
317 PRINTK_ERROR(KERN_ERR_MWAVE
318 "mwavedd::mwave_ioctl:"
319 " IOCTL_MW_GET_IPC: Error:"
320 " Invalid ipcnum %x\n", ipcnum);
321 return -EINVAL;
322 }
323 ipcnum = array_index_nospec(ipcnum,
324 ARRAY_SIZE(pDrvData->IPCs));
325 PRINTK_3(TRACE_MWAVE,
326 "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC"
327 " ipcnum %x, usIntCount %x\n",
328 ipcnum,
329 pDrvData->IPCs[ipcnum].usIntCount);
330
331 mutex_lock(&mwave_mutex);
332 if (pDrvData->IPCs[ipcnum].bIsEnabled == true) {
333 DECLARE_WAITQUEUE(wait, current);
334
335 PRINTK_2(TRACE_MWAVE,
336 "mwavedd::mwave_ioctl, thread for"
337 " ipc %x going to sleep\n",
338 ipcnum);
339 add_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait);
340 pDrvData->IPCs[ipcnum].bIsHere = true;
341 set_current_state(TASK_INTERRUPTIBLE);
342 /* check whether an event was signalled by */
343 /* the interrupt handler while we were gone */
344 if (pDrvData->IPCs[ipcnum].usIntCount == 1) { /* first int has occurred (race condition) */
345 pDrvData->IPCs[ipcnum].usIntCount = 2; /* first int has been handled */
346 PRINTK_2(TRACE_MWAVE,
347 "mwavedd::mwave_ioctl"
348 " IOCTL_MW_GET_IPC ipcnum %x"
349 " handling first int\n",
350 ipcnum);
351 } else { /* either 1st int has not yet occurred, or we have already handled the first int */
352 schedule();
353 if (pDrvData->IPCs[ipcnum].usIntCount == 1) {
354 pDrvData->IPCs[ipcnum].usIntCount = 2;
355 }
356 PRINTK_2(TRACE_MWAVE,
357 "mwavedd::mwave_ioctl"
358 " IOCTL_MW_GET_IPC ipcnum %x"
359 " woke up and returning to"
360 " application\n",
361 ipcnum);
362 }
363 pDrvData->IPCs[ipcnum].bIsHere = false;
364 remove_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait);
365 set_current_state(TASK_RUNNING);
366 PRINTK_2(TRACE_MWAVE,
367 "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC,"
368 " returning thread for ipc %x"
369 " processing\n",
370 ipcnum);
371 }
372 mutex_unlock(&mwave_mutex);
373 }
374 break;
375
376 case IOCTL_MW_UNREGISTER_IPC: {
377 unsigned int ipcnum = (unsigned int) ioarg;
378
379 PRINTK_2(TRACE_MWAVE,
380 "mwavedd::mwave_ioctl IOCTL_MW_UNREGISTER_IPC"
381 " ipcnum %x\n",
382 ipcnum);
383 if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
384 PRINTK_ERROR(KERN_ERR_MWAVE
385 "mwavedd::mwave_ioctl:"
386 " IOCTL_MW_UNREGISTER_IPC:"
387 " Error: Invalid ipcnum %x\n",
388 ipcnum);
389 return -EINVAL;
390 }
391 ipcnum = array_index_nospec(ipcnum,
392 ARRAY_SIZE(pDrvData->IPCs));
393 mutex_lock(&mwave_mutex);
394 if (pDrvData->IPCs[ipcnum].bIsEnabled == true) {
395 pDrvData->IPCs[ipcnum].bIsEnabled = false;
396 if (pDrvData->IPCs[ipcnum].bIsHere == true) {
397 wake_up_interruptible(&pDrvData->IPCs[ipcnum].ipc_wait_queue);
398 }
399 }
400 mutex_unlock(&mwave_mutex);
401 }
402 break;
403
404 default:
405 return -ENOTTY;
406 break;
407 } /* switch */
408
409 PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, exit retval %x\n", retval);
410
411 return retval;
412 }
413
414
mwave_read(struct file * file,char __user * buf,size_t count,loff_t * ppos)415 static ssize_t mwave_read(struct file *file, char __user *buf, size_t count,
416 loff_t * ppos)
417 {
418 PRINTK_5(TRACE_MWAVE,
419 "mwavedd::mwave_read entry file %p, buf %p, count %zx ppos %p\n",
420 file, buf, count, ppos);
421
422 return -EINVAL;
423 }
424
425
mwave_write(struct file * file,const char __user * buf,size_t count,loff_t * ppos)426 static ssize_t mwave_write(struct file *file, const char __user *buf,
427 size_t count, loff_t * ppos)
428 {
429 PRINTK_5(TRACE_MWAVE,
430 "mwavedd::mwave_write entry file %p, buf %p,"
431 " count %zx ppos %p\n",
432 file, buf, count, ppos);
433
434 return -EINVAL;
435 }
436
437
register_serial_portandirq(unsigned int port,int irq)438 static int register_serial_portandirq(unsigned int port, int irq)
439 {
440 struct uart_8250_port uart;
441
442 switch ( port ) {
443 case 0x3f8:
444 case 0x2f8:
445 case 0x3e8:
446 case 0x2e8:
447 /* OK */
448 break;
449 default:
450 PRINTK_ERROR(KERN_ERR_MWAVE
451 "mwavedd::register_serial_portandirq:"
452 " Error: Illegal port %x\n", port );
453 return -1;
454 } /* switch */
455 /* port is okay */
456
457 switch ( irq ) {
458 case 3:
459 case 4:
460 case 5:
461 case 7:
462 /* OK */
463 break;
464 default:
465 PRINTK_ERROR(KERN_ERR_MWAVE
466 "mwavedd::register_serial_portandirq:"
467 " Error: Illegal irq %x\n", irq );
468 return -1;
469 } /* switch */
470 /* irq is okay */
471
472 memset(&uart, 0, sizeof(uart));
473
474 uart.port.uartclk = 1843200;
475 uart.port.iobase = port;
476 uart.port.irq = irq;
477 uart.port.iotype = UPIO_PORT;
478 uart.port.flags = UPF_SHARE_IRQ;
479 return serial8250_register_8250_port(&uart);
480 }
481
482
483 static const struct file_operations mwave_fops = {
484 .owner = THIS_MODULE,
485 .read = mwave_read,
486 .write = mwave_write,
487 .unlocked_ioctl = mwave_ioctl,
488 .open = mwave_open,
489 .release = mwave_close,
490 .llseek = default_llseek,
491 };
492
493
494 static struct miscdevice mwave_misc_dev = { MWAVE_MINOR, "mwave", &mwave_fops };
495
496 #if 0 /* totally b0rked */
497 /*
498 * sysfs support <paulsch@us.ibm.com>
499 */
500
501 struct device mwave_device;
502
503 /* Prevent code redundancy, create a macro for mwave_show_* functions. */
504 #define mwave_show_function(attr_name, format_string, field) \
505 static ssize_t mwave_show_##attr_name(struct device *dev, struct device_attribute *attr, char *buf) \
506 { \
507 DSP_3780I_CONFIG_SETTINGS *pSettings = \
508 &mwave_s_mdd.rBDData.rDspSettings; \
509 return sprintf(buf, format_string, pSettings->field); \
510 }
511
512 /* All of our attributes are read attributes. */
513 #define mwave_dev_rd_attr(attr_name, format_string, field) \
514 mwave_show_function(attr_name, format_string, field) \
515 static DEVICE_ATTR(attr_name, S_IRUGO, mwave_show_##attr_name, NULL)
516
517 mwave_dev_rd_attr (3780i_dma, "%i\n", usDspDma);
518 mwave_dev_rd_attr (3780i_irq, "%i\n", usDspIrq);
519 mwave_dev_rd_attr (3780i_io, "%#.4x\n", usDspBaseIO);
520 mwave_dev_rd_attr (uart_irq, "%i\n", usUartIrq);
521 mwave_dev_rd_attr (uart_io, "%#.4x\n", usUartBaseIO);
522
523 static struct device_attribute * const mwave_dev_attrs[] = {
524 &dev_attr_3780i_dma,
525 &dev_attr_3780i_irq,
526 &dev_attr_3780i_io,
527 &dev_attr_uart_irq,
528 &dev_attr_uart_io,
529 };
530 #endif
531
532 /*
533 * mwave_init is called on module load
534 *
535 * mwave_exit is called on module unload
536 * mwave_exit is also used to clean up after an aborted mwave_init
537 */
mwave_exit(void)538 static void mwave_exit(void)
539 {
540 pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
541
542 PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit entry\n");
543
544 #if 0
545 for (i = 0; i < pDrvData->nr_registered_attrs; i++)
546 device_remove_file(&mwave_device, mwave_dev_attrs[i]);
547 pDrvData->nr_registered_attrs = 0;
548
549 if (pDrvData->device_registered) {
550 device_unregister(&mwave_device);
551 pDrvData->device_registered = false;
552 }
553 #endif
554
555 if ( pDrvData->sLine >= 0 ) {
556 serial8250_unregister_port(pDrvData->sLine);
557 }
558 if (pDrvData->bMwaveDevRegistered) {
559 misc_deregister(&mwave_misc_dev);
560 }
561 if (pDrvData->bDSPEnabled) {
562 tp3780I_DisableDSP(&pDrvData->rBDData);
563 }
564 if (pDrvData->bResourcesClaimed) {
565 tp3780I_ReleaseResources(&pDrvData->rBDData);
566 }
567 if (pDrvData->bBDInitialized) {
568 tp3780I_Cleanup(&pDrvData->rBDData);
569 }
570
571 PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit exit\n");
572 }
573
574 module_exit(mwave_exit);
575
mwave_init(void)576 static int __init mwave_init(void)
577 {
578 int i;
579 int retval = 0;
580 pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
581
582 PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_init entry\n");
583
584 memset(&mwave_s_mdd, 0, sizeof(MWAVE_DEVICE_DATA));
585
586 pDrvData->bBDInitialized = false;
587 pDrvData->bResourcesClaimed = false;
588 pDrvData->bDSPEnabled = false;
589 pDrvData->bDSPReset = false;
590 pDrvData->bMwaveDevRegistered = false;
591 pDrvData->sLine = -1;
592
593 for (i = 0; i < ARRAY_SIZE(pDrvData->IPCs); i++) {
594 pDrvData->IPCs[i].bIsEnabled = false;
595 pDrvData->IPCs[i].bIsHere = false;
596 pDrvData->IPCs[i].usIntCount = 0; /* no ints received yet */
597 init_waitqueue_head(&pDrvData->IPCs[i].ipc_wait_queue);
598 }
599
600 retval = tp3780I_InitializeBoardData(&pDrvData->rBDData);
601 PRINTK_2(TRACE_MWAVE,
602 "mwavedd::mwave_init, return from tp3780I_InitializeBoardData"
603 " retval %x\n",
604 retval);
605 if (retval) {
606 PRINTK_ERROR(KERN_ERR_MWAVE
607 "mwavedd::mwave_init: Error:"
608 " Failed to initialize board data\n");
609 goto cleanup_error;
610 }
611 pDrvData->bBDInitialized = true;
612
613 retval = tp3780I_CalcResources(&pDrvData->rBDData);
614 PRINTK_2(TRACE_MWAVE,
615 "mwavedd::mwave_init, return from tp3780I_CalcResources"
616 " retval %x\n",
617 retval);
618 if (retval) {
619 PRINTK_ERROR(KERN_ERR_MWAVE
620 "mwavedd:mwave_init: Error:"
621 " Failed to calculate resources\n");
622 goto cleanup_error;
623 }
624
625 retval = tp3780I_ClaimResources(&pDrvData->rBDData);
626 PRINTK_2(TRACE_MWAVE,
627 "mwavedd::mwave_init, return from tp3780I_ClaimResources"
628 " retval %x\n",
629 retval);
630 if (retval) {
631 PRINTK_ERROR(KERN_ERR_MWAVE
632 "mwavedd:mwave_init: Error:"
633 " Failed to claim resources\n");
634 goto cleanup_error;
635 }
636 pDrvData->bResourcesClaimed = true;
637
638 retval = tp3780I_EnableDSP(&pDrvData->rBDData);
639 PRINTK_2(TRACE_MWAVE,
640 "mwavedd::mwave_init, return from tp3780I_EnableDSP"
641 " retval %x\n",
642 retval);
643 if (retval) {
644 PRINTK_ERROR(KERN_ERR_MWAVE
645 "mwavedd:mwave_init: Error:"
646 " Failed to enable DSP\n");
647 goto cleanup_error;
648 }
649 pDrvData->bDSPEnabled = true;
650
651 if (misc_register(&mwave_misc_dev) < 0) {
652 PRINTK_ERROR(KERN_ERR_MWAVE
653 "mwavedd:mwave_init: Error:"
654 " Failed to register misc device\n");
655 goto cleanup_error;
656 }
657 pDrvData->bMwaveDevRegistered = true;
658
659 pDrvData->sLine = register_serial_portandirq(
660 pDrvData->rBDData.rDspSettings.usUartBaseIO,
661 pDrvData->rBDData.rDspSettings.usUartIrq
662 );
663 if (pDrvData->sLine < 0) {
664 PRINTK_ERROR(KERN_ERR_MWAVE
665 "mwavedd:mwave_init: Error:"
666 " Failed to register serial driver\n");
667 goto cleanup_error;
668 }
669 /* uart is registered */
670
671 #if 0
672 /* sysfs */
673 memset(&mwave_device, 0, sizeof (struct device));
674 dev_set_name(&mwave_device, "mwave");
675
676 if (device_register(&mwave_device))
677 goto cleanup_error;
678 pDrvData->device_registered = true;
679 for (i = 0; i < ARRAY_SIZE(mwave_dev_attrs); i++) {
680 if(device_create_file(&mwave_device, mwave_dev_attrs[i])) {
681 PRINTK_ERROR(KERN_ERR_MWAVE
682 "mwavedd:mwave_init: Error:"
683 " Failed to create sysfs file %s\n",
684 mwave_dev_attrs[i]->attr.name);
685 goto cleanup_error;
686 }
687 pDrvData->nr_registered_attrs++;
688 }
689 #endif
690
691 /* SUCCESS! */
692 return 0;
693
694 cleanup_error:
695 PRINTK_ERROR(KERN_ERR_MWAVE
696 "mwavedd::mwave_init: Error:"
697 " Failed to initialize\n");
698 mwave_exit(); /* clean up */
699
700 return -EIO;
701 }
702
703 module_init(mwave_init);
704
705