1#
2# Pressure drivers
3#
4# When adding new entries keep the list in alphabetical order
5
6menu "Pressure sensors"
7
8config ABP060MG
9	tristate "Honeywell ABP pressure sensor driver"
10	depends on I2C
11	help
12	  Say yes here to build support for the Honeywell ABP pressure
13	  sensors.
14
15	  To compile this driver as a module, choose M here: the module
16	  will be called abp060mg.
17
18config BMP280
19	tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver"
20	depends on (I2C || SPI_MASTER)
21	select REGMAP
22	select BMP280_I2C if (I2C)
23	select BMP280_SPI if (SPI_MASTER)
24	help
25	  Say yes here to build support for Bosch Sensortec BMP180 and BMP280
26	  pressure and temperature sensors. Also supports the BME280 with
27	  an additional humidity sensor channel.
28
29	  To compile this driver as a module, choose M here: the core module
30	  will be called bmp280 and you will also get bmp280-i2c for I2C
31	  and/or bmp280-spi for SPI support.
32
33config BMP280_I2C
34	tristate
35	depends on BMP280
36	depends on I2C
37	select REGMAP_I2C
38
39config BMP280_SPI
40	tristate
41	depends on BMP280
42	depends on SPI_MASTER
43	select REGMAP
44
45config IIO_CROS_EC_BARO
46	tristate "ChromeOS EC Barometer Sensor"
47	depends on IIO_CROS_EC_SENSORS_CORE
48	help
49	  Say yes here to build support for the Barometer sensor when
50	  presented by the ChromeOS EC Sensor hub.
51
52	  To compile this driver as a module, choose M here: the module
53	  will be called cros_ec_baro.
54
55config HID_SENSOR_PRESS
56	depends on HID_SENSOR_HUB
57	select IIO_BUFFER
58	select IIO_TRIGGERED_BUFFER
59	select HID_SENSOR_IIO_COMMON
60	select HID_SENSOR_IIO_TRIGGER
61	tristate "HID PRESS"
62	help
63	  Say yes here to build support for the HID SENSOR
64	  Pressure driver
65
66	  To compile this driver as a module, choose M here: the module
67	  will be called hid-sensor-press.
68
69config HP03
70	tristate "Hope RF HP03 temperature and pressure sensor driver"
71	depends on I2C
72	select REGMAP_I2C
73	help
74	  Say yes here to build support for Hope RF HP03 pressure and
75	  temperature sensor.
76
77	  To compile this driver as a module, choose M here: the module
78	  will be called hp03.
79
80config MPL115
81	tristate
82
83config MPL115_I2C
84	tristate "Freescale MPL115A2 pressure sensor driver"
85	depends on I2C
86	select MPL115
87	help
88	  Say yes here to build support for the Freescale MPL115A2
89	  pressure sensor connected via I2C.
90
91	  To compile this driver as a module, choose M here: the module
92	  will be called mpl115_i2c.
93
94config MPL115_SPI
95	tristate "Freescale MPL115A1 pressure sensor driver"
96	depends on SPI_MASTER
97	select MPL115
98	help
99	  Say yes here to build support for the Freescale MPL115A1
100	  pressure sensor connected via SPI.
101
102	  To compile this driver as a module, choose M here: the module
103	  will be called mpl115_spi.
104
105config MPL3115
106	tristate "Freescale MPL3115A2 pressure sensor driver"
107	depends on I2C
108	select IIO_BUFFER
109	select IIO_TRIGGERED_BUFFER
110	help
111	  Say yes here to build support for the Freescale MPL3115A2
112	  pressure sensor / altimeter.
113
114	  To compile this driver as a module, choose M here: the module
115	  will be called mpl3115.
116
117config MS5611
118	tristate "Measurement Specialties MS5611 pressure sensor driver"
119	select IIO_BUFFER
120	select IIO_TRIGGERED_BUFFER
121	help
122	  Say Y here to build support for the Measurement Specialties
123	  MS5611, MS5607 pressure and temperature sensors.
124
125	  To compile this driver as a module, choose M here: the module will
126	  be called ms5611_core.
127
128config MS5611_I2C
129	tristate "support I2C bus connection"
130	depends on I2C && MS5611
131	help
132	  Say Y here to build I2C bus support for MS5611.
133
134	  To compile this driver as a module, choose M here: the module will
135	  be called ms5611_i2c.
136
137config MS5611_SPI
138	tristate "support SPI bus connection"
139	depends on SPI_MASTER && MS5611
140	help
141	  Say Y here to build SPI bus support for MS5611.
142
143	  To compile this driver as a module, choose M here: the module will
144	  be called ms5611_spi.
145
146config MS5637
147	tristate "Measurement Specialties MS5637 pressure & temperature sensor"
148	depends on I2C
149	select IIO_MS_SENSORS_I2C
150	help
151	  If you say yes here you get support for the Measurement Specialties
152	  MS5637 pressure and temperature sensor.
153	  This driver is also used for MS8607 temperature, pressure & humidity
154	  sensor
155
156	  This driver can also be built as a module. If so, the module will
157	  be called ms5637.
158
159config IIO_ST_PRESS
160	tristate "STMicroelectronics pressure sensor Driver"
161	depends on (I2C || SPI_MASTER) && SYSFS
162	select IIO_ST_SENSORS_CORE
163	select IIO_ST_PRESS_I2C if (I2C)
164	select IIO_ST_PRESS_SPI if (SPI_MASTER)
165	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
166	help
167	  Say yes here to build support for STMicroelectronics pressure
168	  sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB.
169
170	  This driver can also be built as a module. If so, these modules
171	  will be created:
172	  - st_pressure (core functions for the driver [it is mandatory]);
173	  - st_pressure_i2c (necessary for the I2C devices [optional*]);
174	  - st_pressure_spi (necessary for the SPI devices [optional*]);
175
176	  (*) one of these is necessary to do something.
177
178config IIO_ST_PRESS_I2C
179	tristate
180	depends on IIO_ST_PRESS
181	depends on IIO_ST_SENSORS_I2C
182
183config IIO_ST_PRESS_SPI
184	tristate
185	depends on IIO_ST_PRESS
186	depends on IIO_ST_SENSORS_SPI
187
188config T5403
189	tristate "EPCOS T5403 digital barometric pressure sensor driver"
190	depends on I2C
191	help
192	  Say yes here to build support for the EPCOS T5403 pressure sensor
193	  connected via I2C.
194
195	  To compile this driver as a module, choose M here: the module
196	  will be called t5403.
197
198config HP206C
199	tristate "HOPERF HP206C precision barometer and altimeter sensor"
200	depends on I2C
201	help
202	  Say yes here to build support for the HOPREF HP206C precision
203	  barometer and altimeter sensor.
204
205	  This driver can also be built as a module. If so, the module will
206	  be called hp206c.
207
208config ZPA2326
209	tristate "Murata ZPA2326 pressure sensor driver"
210	select IIO_BUFFER
211	select IIO_TRIGGERED_BUFFER
212	select REGMAP
213	select ZPA2326_I2C if I2C
214	select ZPA2326_SPI if SPI_MASTER
215	help
216	  Say Y here to build support for the Murata ZPA2326 pressure and
217	  temperature sensor.
218
219	  To compile this driver as a module, choose M here: the module will
220	  be called zpa2326.
221
222config ZPA2326_I2C
223	tristate
224	select REGMAP_I2C
225
226config ZPA2326_SPI
227	tristate
228	select REGMAP_SPI
229
230endmenu
231