1 /*
2  * Montage Technology M88DS3103/M88RS6000 demodulator driver
3  *
4  * Copyright (C) 2013 Antti Palosaari <crope@iki.fi>
5  *
6  *    This program is free software; you can redistribute it and/or modify
7  *    it under the terms of the GNU General Public License as published by
8  *    the Free Software Foundation; either version 2 of the License, or
9  *    (at your option) any later version.
10  *
11  *    This program is distributed in the hope that it will be useful,
12  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
13  *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  *    GNU General Public License for more details.
15  */
16 
17 #ifndef M88DS3103_H
18 #define M88DS3103_H
19 
20 #include <linux/dvb/frontend.h>
21 
22 /*
23  * I2C address
24  * 0x68,
25  */
26 
27 /**
28  * enum m88ds3103_ts_mode - TS connection mode
29  * @M88DS3103_TS_SERIAL:	TS output pin D0, normal
30  * @M88DS3103_TS_SERIAL_D7:	TS output pin D7
31  * @M88DS3103_TS_PARALLEL:	TS Parallel mode
32  * @M88DS3103_TS_CI:		TS CI Mode
33  */
34 enum m88ds3103_ts_mode {
35 	M88DS3103_TS_SERIAL,
36 	M88DS3103_TS_SERIAL_D7,
37 	M88DS3103_TS_PARALLEL,
38 	M88DS3103_TS_CI
39 };
40 
41 /**
42  * enum m88ds3103_clock_out
43  * @M88DS3103_CLOCK_OUT_DISABLED:	Clock output is disabled
44  * @M88DS3103_CLOCK_OUT_ENABLED:	Clock output is enabled with crystal
45  *					clock.
46  * @M88DS3103_CLOCK_OUT_ENABLED_DIV2:	Clock output is enabled with half
47  *					crystal clock.
48  */
49 enum m88ds3103_clock_out {
50 	M88DS3103_CLOCK_OUT_DISABLED,
51 	M88DS3103_CLOCK_OUT_ENABLED,
52 	M88DS3103_CLOCK_OUT_ENABLED_DIV2
53 };
54 
55 /**
56  * struct m88ds3103_platform_data - Platform data for the m88ds3103 driver
57  * @clk: Clock frequency.
58  * @i2c_wr_max: Max bytes I2C adapter can write at once.
59  * @ts_mode: TS mode.
60  * @ts_clk: TS clock (KHz).
61  * @ts_clk_pol: TS clk polarity. 1-active at falling edge; 0-active at rising
62  *  edge.
63  * @spec_inv: Input spectrum inversion.
64  * @agc: AGC configuration.
65  * @agc_inv: AGC polarity.
66  * @clk_out: Clock output.
67  * @envelope_mode: DiSEqC envelope mode.
68  * @lnb_hv_pol: LNB H/V pin polarity. 0: pin high set to VOLTAGE_18, pin low to
69  *  set VOLTAGE_13. 1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18.
70  * @lnb_en_pol: LNB enable pin polarity. 0: pin high to disable, pin low to
71  *  enable. 1: pin high to enable, pin low to disable.
72  * @get_dvb_frontend: Get DVB frontend.
73  * @get_i2c_adapter: Get I2C adapter.
74  */
75 struct m88ds3103_platform_data {
76 	u32 clk;
77 	u16 i2c_wr_max;
78 	enum m88ds3103_ts_mode ts_mode;
79 	u32 ts_clk;
80 	enum m88ds3103_clock_out clk_out;
81 	u8 ts_clk_pol:1;
82 	u8 spec_inv:1;
83 	u8 agc;
84 	u8 agc_inv:1;
85 	u8 envelope_mode:1;
86 	u8 lnb_hv_pol:1;
87 	u8 lnb_en_pol:1;
88 
89 	struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *);
90 	struct i2c_adapter* (*get_i2c_adapter)(struct i2c_client *);
91 
92 /* private: For legacy media attach wrapper. Do not set value. */
93 	u8 attach_in_use:1;
94 };
95 
96 /**
97  * struct m88ds3103_config - m88ds3102 configuration
98  *
99  * @i2c_addr:	I2C address. Default: none, must set. Example: 0x68, ...
100  * @clock:	Device's clock. Default: none, must set. Example: 27000000
101  * @i2c_wr_max: Max bytes I2C provider is asked to write at once.
102  *		Default: none, must set. Example: 33, 65, ...
103  * @ts_mode:	TS output mode, as defined by &enum m88ds3103_ts_mode.
104  *		Default: M88DS3103_TS_SERIAL.
105  * @ts_clk:	TS clk in KHz. Default: 0.
106  * @ts_clk_pol:	TS clk polarity.Default: 0.
107  *		1-active at falling edge; 0-active at rising edge.
108  * @spec_inv:	Spectrum inversion. Default: 0.
109  * @agc_inv:	AGC polarity. Default: 0.
110  * @clock_out:	Clock output, as defined by &enum m88ds3103_clock_out.
111  *		Default: M88DS3103_CLOCK_OUT_DISABLED.
112  * @envelope_mode: DiSEqC envelope mode. Default: 0.
113  * @agc:	AGC configuration. Default: none, must set.
114  * @lnb_hv_pol:	LNB H/V pin polarity. Default: 0. Values:
115  *		1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18;
116  *		0: pin high set to VOLTAGE_18, pin low to set VOLTAGE_13.
117  * @lnb_en_pol:	LNB enable pin polarity. Default: 0. Values:
118  *		1: pin high to enable, pin low to disable;
119  *		0: pin high to disable, pin low to enable.
120  */
121 struct m88ds3103_config {
122 	u8 i2c_addr;
123 	u32 clock;
124 	u16 i2c_wr_max;
125 	u8 ts_mode;
126 	u32 ts_clk;
127 	u8 ts_clk_pol:1;
128 	u8 spec_inv:1;
129 	u8 agc_inv:1;
130 	u8 clock_out;
131 	u8 envelope_mode:1;
132 	u8 agc;
133 	u8 lnb_hv_pol:1;
134 	u8 lnb_en_pol:1;
135 };
136 
137 #if defined(CONFIG_DVB_M88DS3103) || \
138 		(defined(CONFIG_DVB_M88DS3103_MODULE) && defined(MODULE))
139 /**
140  * Attach a m88ds3103 demod
141  *
142  * @config: pointer to &struct m88ds3103_config with demod configuration.
143  * @i2c: i2c adapter to use.
144  * @tuner_i2c: on success, returns the I2C adapter associated with
145  *		m88ds3103 tuner.
146  *
147  * return: FE pointer on success, NULL on failure.
148  * Note: Do not add new m88ds3103_attach() users! Use I2C bindings instead.
149  */
150 extern struct dvb_frontend *m88ds3103_attach(
151 		const struct m88ds3103_config *config,
152 		struct i2c_adapter *i2c,
153 		struct i2c_adapter **tuner_i2c);
154 extern int m88ds3103_get_agc_pwm(struct dvb_frontend *fe, u8 *_agc_pwm);
155 #else
m88ds3103_attach(const struct m88ds3103_config * config,struct i2c_adapter * i2c,struct i2c_adapter ** tuner_i2c)156 static inline struct dvb_frontend *m88ds3103_attach(
157 		const struct m88ds3103_config *config,
158 		struct i2c_adapter *i2c,
159 		struct i2c_adapter **tuner_i2c)
160 {
161 	pr_warn("%s: driver disabled by Kconfig\n", __func__);
162 	return NULL;
163 }
164 #define m88ds3103_get_agc_pwm NULL
165 #endif
166 
167 #endif
168