1 /*
2 * fsa9480.c - FSA9480 micro USB switch device driver
3 *
4 * Copyright (C) 2010 Samsung Electronics
5 * Minkyu Kang <mk7.kang@samsung.com>
6 * Wonguk Jeong <wonguk.jeong@samsung.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13 #include <linux/kernel.h>
14 #include <linux/module.h>
15 #include <linux/err.h>
16 #include <linux/i2c.h>
17 #include <linux/platform_data/fsa9480.h>
18 #include <linux/irq.h>
19 #include <linux/interrupt.h>
20 #include <linux/workqueue.h>
21 #include <linux/platform_device.h>
22 #include <linux/slab.h>
23 #include <linux/pm_runtime.h>
24
25 /* FSA9480 I2C registers */
26 #define FSA9480_REG_DEVID 0x01
27 #define FSA9480_REG_CTRL 0x02
28 #define FSA9480_REG_INT1 0x03
29 #define FSA9480_REG_INT2 0x04
30 #define FSA9480_REG_INT1_MASK 0x05
31 #define FSA9480_REG_INT2_MASK 0x06
32 #define FSA9480_REG_ADC 0x07
33 #define FSA9480_REG_TIMING1 0x08
34 #define FSA9480_REG_TIMING2 0x09
35 #define FSA9480_REG_DEV_T1 0x0a
36 #define FSA9480_REG_DEV_T2 0x0b
37 #define FSA9480_REG_BTN1 0x0c
38 #define FSA9480_REG_BTN2 0x0d
39 #define FSA9480_REG_CK 0x0e
40 #define FSA9480_REG_CK_INT1 0x0f
41 #define FSA9480_REG_CK_INT2 0x10
42 #define FSA9480_REG_CK_INTMASK1 0x11
43 #define FSA9480_REG_CK_INTMASK2 0x12
44 #define FSA9480_REG_MANSW1 0x13
45 #define FSA9480_REG_MANSW2 0x14
46
47 /* Control */
48 #define CON_SWITCH_OPEN (1 << 4)
49 #define CON_RAW_DATA (1 << 3)
50 #define CON_MANUAL_SW (1 << 2)
51 #define CON_WAIT (1 << 1)
52 #define CON_INT_MASK (1 << 0)
53 #define CON_MASK (CON_SWITCH_OPEN | CON_RAW_DATA | \
54 CON_MANUAL_SW | CON_WAIT)
55
56 /* Device Type 1 */
57 #define DEV_USB_OTG (1 << 7)
58 #define DEV_DEDICATED_CHG (1 << 6)
59 #define DEV_USB_CHG (1 << 5)
60 #define DEV_CAR_KIT (1 << 4)
61 #define DEV_UART (1 << 3)
62 #define DEV_USB (1 << 2)
63 #define DEV_AUDIO_2 (1 << 1)
64 #define DEV_AUDIO_1 (1 << 0)
65
66 #define DEV_T1_USB_MASK (DEV_USB_OTG | DEV_USB)
67 #define DEV_T1_UART_MASK (DEV_UART)
68 #define DEV_T1_CHARGER_MASK (DEV_DEDICATED_CHG | DEV_USB_CHG)
69
70 /* Device Type 2 */
71 #define DEV_AV (1 << 6)
72 #define DEV_TTY (1 << 5)
73 #define DEV_PPD (1 << 4)
74 #define DEV_JIG_UART_OFF (1 << 3)
75 #define DEV_JIG_UART_ON (1 << 2)
76 #define DEV_JIG_USB_OFF (1 << 1)
77 #define DEV_JIG_USB_ON (1 << 0)
78
79 #define DEV_T2_USB_MASK (DEV_JIG_USB_OFF | DEV_JIG_USB_ON)
80 #define DEV_T2_UART_MASK (DEV_JIG_UART_OFF | DEV_JIG_UART_ON)
81 #define DEV_T2_JIG_MASK (DEV_JIG_USB_OFF | DEV_JIG_USB_ON | \
82 DEV_JIG_UART_OFF | DEV_JIG_UART_ON)
83
84 /*
85 * Manual Switch
86 * D- [7:5] / D+ [4:2]
87 * 000: Open all / 001: USB / 010: AUDIO / 011: UART / 100: V_AUDIO
88 */
89 #define SW_VAUDIO ((4 << 5) | (4 << 2))
90 #define SW_UART ((3 << 5) | (3 << 2))
91 #define SW_AUDIO ((2 << 5) | (2 << 2))
92 #define SW_DHOST ((1 << 5) | (1 << 2))
93 #define SW_AUTO ((0 << 5) | (0 << 2))
94
95 /* Interrupt 1 */
96 #define INT_DETACH (1 << 1)
97 #define INT_ATTACH (1 << 0)
98
99 struct fsa9480_usbsw {
100 struct i2c_client *client;
101 struct fsa9480_platform_data *pdata;
102 int dev1;
103 int dev2;
104 int mansw;
105 };
106
107 static struct fsa9480_usbsw *chip;
108
fsa9480_write_reg(struct i2c_client * client,int reg,int value)109 static int fsa9480_write_reg(struct i2c_client *client,
110 int reg, int value)
111 {
112 int ret;
113
114 ret = i2c_smbus_write_byte_data(client, reg, value);
115
116 if (ret < 0)
117 dev_err(&client->dev, "%s: err %d\n", __func__, ret);
118
119 return ret;
120 }
121
fsa9480_read_reg(struct i2c_client * client,int reg)122 static int fsa9480_read_reg(struct i2c_client *client, int reg)
123 {
124 int ret;
125
126 ret = i2c_smbus_read_byte_data(client, reg);
127
128 if (ret < 0)
129 dev_err(&client->dev, "%s: err %d\n", __func__, ret);
130
131 return ret;
132 }
133
fsa9480_read_irq(struct i2c_client * client,int * value)134 static int fsa9480_read_irq(struct i2c_client *client, int *value)
135 {
136 int ret;
137
138 ret = i2c_smbus_read_i2c_block_data(client,
139 FSA9480_REG_INT1, 2, (u8 *)value);
140 *value &= 0xffff;
141
142 if (ret < 0)
143 dev_err(&client->dev, "%s: err %d\n", __func__, ret);
144
145 return ret;
146 }
147
fsa9480_set_switch(const char * buf)148 static void fsa9480_set_switch(const char *buf)
149 {
150 struct fsa9480_usbsw *usbsw = chip;
151 struct i2c_client *client = usbsw->client;
152 unsigned int value;
153 unsigned int path = 0;
154
155 value = fsa9480_read_reg(client, FSA9480_REG_CTRL);
156
157 if (!strncmp(buf, "VAUDIO", 6)) {
158 path = SW_VAUDIO;
159 value &= ~CON_MANUAL_SW;
160 } else if (!strncmp(buf, "UART", 4)) {
161 path = SW_UART;
162 value &= ~CON_MANUAL_SW;
163 } else if (!strncmp(buf, "AUDIO", 5)) {
164 path = SW_AUDIO;
165 value &= ~CON_MANUAL_SW;
166 } else if (!strncmp(buf, "DHOST", 5)) {
167 path = SW_DHOST;
168 value &= ~CON_MANUAL_SW;
169 } else if (!strncmp(buf, "AUTO", 4)) {
170 path = SW_AUTO;
171 value |= CON_MANUAL_SW;
172 } else {
173 printk(KERN_ERR "Wrong command\n");
174 return;
175 }
176
177 usbsw->mansw = path;
178 fsa9480_write_reg(client, FSA9480_REG_MANSW1, path);
179 fsa9480_write_reg(client, FSA9480_REG_CTRL, value);
180 }
181
fsa9480_get_switch(char * buf)182 static ssize_t fsa9480_get_switch(char *buf)
183 {
184 struct fsa9480_usbsw *usbsw = chip;
185 struct i2c_client *client = usbsw->client;
186 unsigned int value;
187
188 value = fsa9480_read_reg(client, FSA9480_REG_MANSW1);
189
190 if (value == SW_VAUDIO)
191 return sprintf(buf, "VAUDIO\n");
192 else if (value == SW_UART)
193 return sprintf(buf, "UART\n");
194 else if (value == SW_AUDIO)
195 return sprintf(buf, "AUDIO\n");
196 else if (value == SW_DHOST)
197 return sprintf(buf, "DHOST\n");
198 else if (value == SW_AUTO)
199 return sprintf(buf, "AUTO\n");
200 else
201 return sprintf(buf, "%x", value);
202 }
203
fsa9480_show_device(struct device * dev,struct device_attribute * attr,char * buf)204 static ssize_t fsa9480_show_device(struct device *dev,
205 struct device_attribute *attr,
206 char *buf)
207 {
208 struct fsa9480_usbsw *usbsw = dev_get_drvdata(dev);
209 struct i2c_client *client = usbsw->client;
210 int dev1, dev2;
211
212 dev1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
213 dev2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
214
215 if (!dev1 && !dev2)
216 return sprintf(buf, "NONE\n");
217
218 /* USB */
219 if (dev1 & DEV_T1_USB_MASK || dev2 & DEV_T2_USB_MASK)
220 return sprintf(buf, "USB\n");
221
222 /* UART */
223 if (dev1 & DEV_T1_UART_MASK || dev2 & DEV_T2_UART_MASK)
224 return sprintf(buf, "UART\n");
225
226 /* CHARGER */
227 if (dev1 & DEV_T1_CHARGER_MASK)
228 return sprintf(buf, "CHARGER\n");
229
230 /* JIG */
231 if (dev2 & DEV_T2_JIG_MASK)
232 return sprintf(buf, "JIG\n");
233
234 return sprintf(buf, "UNKNOWN\n");
235 }
236
fsa9480_show_manualsw(struct device * dev,struct device_attribute * attr,char * buf)237 static ssize_t fsa9480_show_manualsw(struct device *dev,
238 struct device_attribute *attr, char *buf)
239 {
240 return fsa9480_get_switch(buf);
241
242 }
243
fsa9480_set_manualsw(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)244 static ssize_t fsa9480_set_manualsw(struct device *dev,
245 struct device_attribute *attr,
246 const char *buf, size_t count)
247 {
248 fsa9480_set_switch(buf);
249
250 return count;
251 }
252
253 static DEVICE_ATTR(device, S_IRUGO, fsa9480_show_device, NULL);
254 static DEVICE_ATTR(switch, S_IRUGO | S_IWUSR,
255 fsa9480_show_manualsw, fsa9480_set_manualsw);
256
257 static struct attribute *fsa9480_attributes[] = {
258 &dev_attr_device.attr,
259 &dev_attr_switch.attr,
260 NULL
261 };
262
263 static const struct attribute_group fsa9480_group = {
264 .attrs = fsa9480_attributes,
265 };
266
fsa9480_detect_dev(struct fsa9480_usbsw * usbsw,int intr)267 static void fsa9480_detect_dev(struct fsa9480_usbsw *usbsw, int intr)
268 {
269 int val1, val2, ctrl;
270 struct fsa9480_platform_data *pdata = usbsw->pdata;
271 struct i2c_client *client = usbsw->client;
272
273 val1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
274 val2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
275 ctrl = fsa9480_read_reg(client, FSA9480_REG_CTRL);
276
277 dev_info(&client->dev, "intr: 0x%x, dev1: 0x%x, dev2: 0x%x\n",
278 intr, val1, val2);
279
280 if (!intr)
281 goto out;
282
283 if (intr & INT_ATTACH) { /* Attached */
284 /* USB */
285 if (val1 & DEV_T1_USB_MASK || val2 & DEV_T2_USB_MASK) {
286 if (pdata->usb_cb)
287 pdata->usb_cb(FSA9480_ATTACHED);
288
289 if (usbsw->mansw) {
290 fsa9480_write_reg(client,
291 FSA9480_REG_MANSW1, usbsw->mansw);
292 }
293 }
294
295 /* UART */
296 if (val1 & DEV_T1_UART_MASK || val2 & DEV_T2_UART_MASK) {
297 if (pdata->uart_cb)
298 pdata->uart_cb(FSA9480_ATTACHED);
299
300 if (!(ctrl & CON_MANUAL_SW)) {
301 fsa9480_write_reg(client,
302 FSA9480_REG_MANSW1, SW_UART);
303 }
304 }
305
306 /* CHARGER */
307 if (val1 & DEV_T1_CHARGER_MASK) {
308 if (pdata->charger_cb)
309 pdata->charger_cb(FSA9480_ATTACHED);
310 }
311
312 /* JIG */
313 if (val2 & DEV_T2_JIG_MASK) {
314 if (pdata->jig_cb)
315 pdata->jig_cb(FSA9480_ATTACHED);
316 }
317 } else if (intr & INT_DETACH) { /* Detached */
318 /* USB */
319 if (usbsw->dev1 & DEV_T1_USB_MASK ||
320 usbsw->dev2 & DEV_T2_USB_MASK) {
321 if (pdata->usb_cb)
322 pdata->usb_cb(FSA9480_DETACHED);
323 }
324
325 /* UART */
326 if (usbsw->dev1 & DEV_T1_UART_MASK ||
327 usbsw->dev2 & DEV_T2_UART_MASK) {
328 if (pdata->uart_cb)
329 pdata->uart_cb(FSA9480_DETACHED);
330 }
331
332 /* CHARGER */
333 if (usbsw->dev1 & DEV_T1_CHARGER_MASK) {
334 if (pdata->charger_cb)
335 pdata->charger_cb(FSA9480_DETACHED);
336 }
337
338 /* JIG */
339 if (usbsw->dev2 & DEV_T2_JIG_MASK) {
340 if (pdata->jig_cb)
341 pdata->jig_cb(FSA9480_DETACHED);
342 }
343 }
344
345 usbsw->dev1 = val1;
346 usbsw->dev2 = val2;
347
348 out:
349 ctrl &= ~CON_INT_MASK;
350 fsa9480_write_reg(client, FSA9480_REG_CTRL, ctrl);
351 }
352
fsa9480_irq_handler(int irq,void * data)353 static irqreturn_t fsa9480_irq_handler(int irq, void *data)
354 {
355 struct fsa9480_usbsw *usbsw = data;
356 struct i2c_client *client = usbsw->client;
357 int intr;
358
359 /* clear interrupt */
360 fsa9480_read_irq(client, &intr);
361
362 /* device detection */
363 fsa9480_detect_dev(usbsw, intr);
364
365 return IRQ_HANDLED;
366 }
367
fsa9480_irq_init(struct fsa9480_usbsw * usbsw)368 static int fsa9480_irq_init(struct fsa9480_usbsw *usbsw)
369 {
370 struct fsa9480_platform_data *pdata = usbsw->pdata;
371 struct i2c_client *client = usbsw->client;
372 int ret;
373 int intr;
374 unsigned int ctrl = CON_MASK;
375
376 /* clear interrupt */
377 fsa9480_read_irq(client, &intr);
378
379 /* unmask interrupt (attach/detach only) */
380 fsa9480_write_reg(client, FSA9480_REG_INT1_MASK, 0xfc);
381 fsa9480_write_reg(client, FSA9480_REG_INT2_MASK, 0x1f);
382
383 usbsw->mansw = fsa9480_read_reg(client, FSA9480_REG_MANSW1);
384
385 if (usbsw->mansw)
386 ctrl &= ~CON_MANUAL_SW; /* Manual Switching Mode */
387
388 fsa9480_write_reg(client, FSA9480_REG_CTRL, ctrl);
389
390 if (pdata && pdata->cfg_gpio)
391 pdata->cfg_gpio();
392
393 if (client->irq) {
394 ret = request_threaded_irq(client->irq, NULL,
395 fsa9480_irq_handler,
396 IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
397 "fsa9480 micro USB", usbsw);
398 if (ret) {
399 dev_err(&client->dev, "failed to request IRQ\n");
400 return ret;
401 }
402
403 if (pdata)
404 device_init_wakeup(&client->dev, pdata->wakeup);
405 }
406
407 return 0;
408 }
409
fsa9480_probe(struct i2c_client * client,const struct i2c_device_id * id)410 static int fsa9480_probe(struct i2c_client *client,
411 const struct i2c_device_id *id)
412 {
413 struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
414 struct fsa9480_usbsw *usbsw;
415 int ret = 0;
416
417 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
418 return -EIO;
419
420 usbsw = kzalloc(sizeof(struct fsa9480_usbsw), GFP_KERNEL);
421 if (!usbsw) {
422 dev_err(&client->dev, "failed to allocate driver data\n");
423 return -ENOMEM;
424 }
425
426 usbsw->client = client;
427 usbsw->pdata = client->dev.platform_data;
428
429 chip = usbsw;
430
431 i2c_set_clientdata(client, usbsw);
432
433 ret = fsa9480_irq_init(usbsw);
434 if (ret)
435 goto fail1;
436
437 ret = sysfs_create_group(&client->dev.kobj, &fsa9480_group);
438 if (ret) {
439 dev_err(&client->dev,
440 "failed to create fsa9480 attribute group\n");
441 goto fail2;
442 }
443
444 /* ADC Detect Time: 500ms */
445 fsa9480_write_reg(client, FSA9480_REG_TIMING1, 0x6);
446
447 if (chip->pdata->reset_cb)
448 chip->pdata->reset_cb();
449
450 /* device detection */
451 fsa9480_detect_dev(usbsw, INT_ATTACH);
452
453 pm_runtime_set_active(&client->dev);
454
455 return 0;
456
457 fail2:
458 if (client->irq)
459 free_irq(client->irq, usbsw);
460 fail1:
461 kfree(usbsw);
462 return ret;
463 }
464
fsa9480_remove(struct i2c_client * client)465 static int fsa9480_remove(struct i2c_client *client)
466 {
467 struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
468
469 if (client->irq)
470 free_irq(client->irq, usbsw);
471
472 sysfs_remove_group(&client->dev.kobj, &fsa9480_group);
473 device_init_wakeup(&client->dev, 0);
474 kfree(usbsw);
475 return 0;
476 }
477
478 #ifdef CONFIG_PM_SLEEP
479
fsa9480_suspend(struct device * dev)480 static int fsa9480_suspend(struct device *dev)
481 {
482 struct i2c_client *client = to_i2c_client(dev);
483 struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
484 struct fsa9480_platform_data *pdata = usbsw->pdata;
485
486 if (device_may_wakeup(&client->dev) && client->irq)
487 enable_irq_wake(client->irq);
488
489 if (pdata->usb_power)
490 pdata->usb_power(0);
491
492 return 0;
493 }
494
fsa9480_resume(struct device * dev)495 static int fsa9480_resume(struct device *dev)
496 {
497 struct i2c_client *client = to_i2c_client(dev);
498 struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
499 int dev1, dev2;
500
501 if (device_may_wakeup(&client->dev) && client->irq)
502 disable_irq_wake(client->irq);
503
504 /*
505 * Clear Pending interrupt. Note that detect_dev does what
506 * the interrupt handler does. So, we don't miss pending and
507 * we reenable interrupt if there is one.
508 */
509 fsa9480_read_reg(client, FSA9480_REG_INT1);
510 fsa9480_read_reg(client, FSA9480_REG_INT2);
511
512 dev1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
513 dev2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
514
515 /* device detection */
516 fsa9480_detect_dev(usbsw, (dev1 || dev2) ? INT_ATTACH : INT_DETACH);
517
518 return 0;
519 }
520
521 static SIMPLE_DEV_PM_OPS(fsa9480_pm_ops, fsa9480_suspend, fsa9480_resume);
522 #define FSA9480_PM_OPS (&fsa9480_pm_ops)
523
524 #else
525
526 #define FSA9480_PM_OPS NULL
527
528 #endif /* CONFIG_PM_SLEEP */
529
530 static const struct i2c_device_id fsa9480_id[] = {
531 {"fsa9480", 0},
532 {}
533 };
534 MODULE_DEVICE_TABLE(i2c, fsa9480_id);
535
536 static struct i2c_driver fsa9480_i2c_driver = {
537 .driver = {
538 .name = "fsa9480",
539 .pm = FSA9480_PM_OPS,
540 },
541 .probe = fsa9480_probe,
542 .remove = fsa9480_remove,
543 .id_table = fsa9480_id,
544 };
545
546 module_i2c_driver(fsa9480_i2c_driver);
547
548 MODULE_AUTHOR("Minkyu Kang <mk7.kang@samsung.com>");
549 MODULE_DESCRIPTION("FSA9480 USB Switch driver");
550 MODULE_LICENSE("GPL");
551