1 /*
2 * Intel MIC Platform Software Stack (MPSS)
3 *
4 * Copyright(c) 2014 Intel Corporation.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License, version 2, as
8 * published by the Free Software Foundation.
9 *
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License for more details.
14 *
15 * Intel SCIF driver.
16 *
17 */
18 #ifndef SCIF_MAIN_H
19 #define SCIF_MAIN_H
20
21 #include <linux/sched/signal.h>
22 #include <linux/pci.h>
23 #include <linux/miscdevice.h>
24 #include <linux/dmaengine.h>
25 #include <linux/iova.h>
26 #include <linux/anon_inodes.h>
27 #include <linux/file.h>
28 #include <linux/vmalloc.h>
29 #include <linux/scif.h>
30 #include "../common/mic_dev.h"
31
32 #define SCIF_MGMT_NODE 0
33 #define SCIF_DEFAULT_WATCHDOG_TO 30
34 #define SCIF_NODE_ACCEPT_TIMEOUT (3 * HZ)
35 #define SCIF_NODE_ALIVE_TIMEOUT (SCIF_DEFAULT_WATCHDOG_TO * HZ)
36 #define SCIF_RMA_TEMP_CACHE_LIMIT 0x20000
37
38 /*
39 * Generic state used for certain node QP message exchanges
40 * like Unregister, Alloc etc.
41 */
42 enum scif_msg_state {
43 OP_IDLE = 1,
44 OP_IN_PROGRESS,
45 OP_COMPLETED,
46 OP_FAILED
47 };
48
49 /*
50 * struct scif_info - Global SCIF information
51 *
52 * @nodeid: Node ID this node is to others
53 * @maxid: Max known node ID
54 * @total: Total number of SCIF nodes
55 * @nr_zombies: number of zombie endpoints
56 * @eplock: Lock to synchronize listening, zombie endpoint lists
57 * @connlock: Lock to synchronize connected and disconnected lists
58 * @nb_connect_lock: Synchronize non blocking connect operations
59 * @port_lock: Synchronize access to SCIF ports
60 * @uaccept: List of user acceptreq waiting for acceptreg
61 * @listen: List of listening end points
62 * @zombie: List of zombie end points with pending RMA's
63 * @connected: List of end points in connected state
64 * @disconnected: List of end points in disconnected state
65 * @nb_connect_list: List for non blocking connections
66 * @misc_work: miscellaneous SCIF tasks
67 * @conflock: Lock to synchronize SCIF node configuration changes
68 * @en_msg_log: Enable debug message logging
69 * @p2p_enable: Enable P2P SCIF network
70 * @mdev: The MISC device
71 * @conn_work: Work for workqueue handling all connections
72 * @exitwq: Wait queue for waiting for an EXIT node QP message response
73 * @loopb_dev: Dummy SCIF device used for loopback
74 * @loopb_wq: Workqueue used for handling loopback messages
75 * @loopb_wqname[16]: Name of loopback workqueue
76 * @loopb_work: Used for submitting work to loopb_wq
77 * @loopb_recv_q: List of messages received on the loopb_wq
78 * @card_initiated_exit: set when the card has initiated the exit
79 * @rmalock: Synchronize access to RMA operations
80 * @fencelock: Synchronize access to list of remote fences requested.
81 * @rma: List of temporary registered windows to be destroyed.
82 * @rma_tc: List of temporary registered & cached Windows to be destroyed
83 * @fence: List of remote fence requests
84 * @mmu_notif_work: Work for registration caching MMU notifier workqueue
85 * @mmu_notif_cleanup: List of temporary cached windows for reg cache
86 * @rma_tc_limit: RMA temporary cache limit
87 */
88 struct scif_info {
89 u8 nodeid;
90 u8 maxid;
91 u8 total;
92 u32 nr_zombies;
93 struct mutex eplock;
94 struct mutex connlock;
95 spinlock_t nb_connect_lock;
96 spinlock_t port_lock;
97 struct list_head uaccept;
98 struct list_head listen;
99 struct list_head zombie;
100 struct list_head connected;
101 struct list_head disconnected;
102 struct list_head nb_connect_list;
103 struct work_struct misc_work;
104 struct mutex conflock;
105 u8 en_msg_log;
106 u8 p2p_enable;
107 struct miscdevice mdev;
108 struct work_struct conn_work;
109 wait_queue_head_t exitwq;
110 struct scif_dev *loopb_dev;
111 struct workqueue_struct *loopb_wq;
112 char loopb_wqname[16];
113 struct work_struct loopb_work;
114 struct list_head loopb_recv_q;
115 bool card_initiated_exit;
116 spinlock_t rmalock;
117 struct mutex fencelock;
118 struct list_head rma;
119 struct list_head rma_tc;
120 struct list_head fence;
121 struct work_struct mmu_notif_work;
122 struct list_head mmu_notif_cleanup;
123 unsigned long rma_tc_limit;
124 };
125
126 /*
127 * struct scif_p2p_info - SCIF mapping information used for P2P
128 *
129 * @ppi_peer_id - SCIF peer node id
130 * @ppi_sg - Scatter list for bar information (One for mmio and one for aper)
131 * @sg_nentries - Number of entries in the scatterlist
132 * @ppi_da: DMA address for MMIO and APER bars
133 * @ppi_len: Length of MMIO and APER bars
134 * @ppi_list: Link in list of mapping information
135 */
136 struct scif_p2p_info {
137 u8 ppi_peer_id;
138 struct scatterlist *ppi_sg[2];
139 u64 sg_nentries[2];
140 dma_addr_t ppi_da[2];
141 u64 ppi_len[2];
142 #define SCIF_PPI_MMIO 0
143 #define SCIF_PPI_APER 1
144 struct list_head ppi_list;
145 };
146
147 /*
148 * struct scif_dev - SCIF remote device specific fields
149 *
150 * @node: Node id
151 * @p2p: List of P2P mapping information
152 * @qpairs: The node queue pair for exchanging control messages
153 * @intr_wq: Workqueue for handling Node QP messages
154 * @intr_wqname: Name of node QP workqueue for handling interrupts
155 * @intr_bh: Used for submitting work to intr_wq
156 * @lock: Lock used for synchronizing access to the scif device
157 * @sdev: SCIF hardware device on the SCIF hardware bus
158 * @db: doorbell the peer will trigger to generate an interrupt on self
159 * @rdb: Doorbell to trigger on the peer to generate an interrupt on the peer
160 * @cookie: Cookie received while registering the interrupt handler
161 * @peer_add_work: Work for handling device_add for peer devices
162 * @p2p_dwork: Delayed work to enable polling for P2P state
163 * @qp_dwork: Delayed work for enabling polling for remote QP information
164 * @p2p_retry: Number of times to retry polling of P2P state
165 * @base_addr: P2P aperture bar base address
166 * @mic_mw mmio: The peer MMIO information used for P2P
167 * @spdev: SCIF peer device on the SCIF peer bus
168 * @node_remove_ack_pending: True if a node_remove_ack is pending
169 * @exit_ack_pending: true if an exit_ack is pending
170 * @disconn_wq: Used while waiting for a node remove response
171 * @disconn_rescnt: Keeps track of number of node remove requests sent
172 * @exit: Status of exit message
173 * @qp_dma_addr: Queue pair DMA address passed to the peer
174 * @dma_ch_idx: Round robin index for DMA channels
175 * @signal_pool: DMA pool used for scheduling scif_fence_signal DMA's
176 */
177 struct scif_dev {
178 u8 node;
179 struct list_head p2p;
180 struct scif_qp *qpairs;
181 struct workqueue_struct *intr_wq;
182 char intr_wqname[16];
183 struct work_struct intr_bh;
184 struct mutex lock;
185 struct scif_hw_dev *sdev;
186 int db;
187 int rdb;
188 struct mic_irq *cookie;
189 struct work_struct peer_add_work;
190 struct delayed_work p2p_dwork;
191 struct delayed_work qp_dwork;
192 int p2p_retry;
193 dma_addr_t base_addr;
194 struct mic_mw mmio;
195 struct scif_peer_dev __rcu *spdev;
196 bool node_remove_ack_pending;
197 bool exit_ack_pending;
198 wait_queue_head_t disconn_wq;
199 atomic_t disconn_rescnt;
200 enum scif_msg_state exit;
201 dma_addr_t qp_dma_addr;
202 int dma_ch_idx;
203 struct dma_pool *signal_pool;
204 };
205
206 extern bool scif_reg_cache_enable;
207 extern bool scif_ulimit_check;
208 extern struct scif_info scif_info;
209 extern struct idr scif_ports;
210 extern struct bus_type scif_peer_bus;
211 extern struct scif_dev *scif_dev;
212 extern const struct file_operations scif_fops;
213 extern const struct file_operations scif_anon_fops;
214
215 /* Size of the RB for the Node QP */
216 #define SCIF_NODE_QP_SIZE 0x10000
217
218 #include "scif_nodeqp.h"
219 #include "scif_rma.h"
220 #include "scif_rma_list.h"
221
222 /*
223 * scifdev_self:
224 * @dev: The remote SCIF Device
225 *
226 * Returns true if the SCIF Device passed is the self aka Loopback SCIF device.
227 */
scifdev_self(struct scif_dev * dev)228 static inline int scifdev_self(struct scif_dev *dev)
229 {
230 return dev->node == scif_info.nodeid;
231 }
232
scif_is_mgmt_node(void)233 static inline bool scif_is_mgmt_node(void)
234 {
235 return !scif_info.nodeid;
236 }
237
238 /*
239 * scifdev_is_p2p:
240 * @dev: The remote SCIF Device
241 *
242 * Returns true if the SCIF Device is a MIC Peer to Peer SCIF device.
243 */
scifdev_is_p2p(struct scif_dev * dev)244 static inline bool scifdev_is_p2p(struct scif_dev *dev)
245 {
246 if (scif_is_mgmt_node())
247 return false;
248 else
249 return dev != &scif_dev[SCIF_MGMT_NODE] &&
250 !scifdev_self(dev);
251 }
252
253 /*
254 * scifdev_alive:
255 * @scifdev: The remote SCIF Device
256 *
257 * Returns true if the remote SCIF Device is running or sleeping for
258 * this endpoint.
259 */
_scifdev_alive(struct scif_dev * scifdev)260 static inline int _scifdev_alive(struct scif_dev *scifdev)
261 {
262 struct scif_peer_dev *spdev;
263
264 rcu_read_lock();
265 spdev = rcu_dereference(scifdev->spdev);
266 rcu_read_unlock();
267 return !!spdev;
268 }
269
270 #include "scif_epd.h"
271
272 void __init scif_init_debugfs(void);
273 void scif_exit_debugfs(void);
274 int scif_setup_intr_wq(struct scif_dev *scifdev);
275 void scif_destroy_intr_wq(struct scif_dev *scifdev);
276 void scif_cleanup_scifdev(struct scif_dev *dev);
277 void scif_handle_remove_node(int node);
278 void scif_disconnect_node(u32 node_id, bool mgmt_initiated);
279 void scif_free_qp(struct scif_dev *dev);
280 void scif_misc_handler(struct work_struct *work);
281 void scif_stop(struct scif_dev *scifdev);
282 irqreturn_t scif_intr_handler(int irq, void *data);
283 #endif /* SCIF_MAIN_H */
284