1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * linux/mii.h: definitions for MII-compatible transceivers
4  * Originally drivers/net/sunhme.h.
5  *
6  * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
7  */
8 #ifndef __LINUX_MII_H__
9 #define __LINUX_MII_H__
10 
11 
12 #include <linux/if.h>
13 #include <uapi/linux/mii.h>
14 
15 struct ethtool_cmd;
16 
17 struct mii_if_info {
18 	int phy_id;
19 	int advertising;
20 	int phy_id_mask;
21 	int reg_num_mask;
22 
23 	unsigned int full_duplex : 1;	/* is full duplex? */
24 	unsigned int force_media : 1;	/* is autoneg. disabled? */
25 	unsigned int supports_gmii : 1; /* are GMII registers supported? */
26 
27 	struct net_device *dev;
28 	int (*mdio_read) (struct net_device *dev, int phy_id, int location);
29 	void (*mdio_write) (struct net_device *dev, int phy_id, int location, int val);
30 };
31 
32 extern int mii_link_ok (struct mii_if_info *mii);
33 extern int mii_nway_restart (struct mii_if_info *mii);
34 extern int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
35 extern void mii_ethtool_get_link_ksettings(
36 	struct mii_if_info *mii, struct ethtool_link_ksettings *cmd);
37 extern int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
38 extern int mii_ethtool_set_link_ksettings(
39 	struct mii_if_info *mii, const struct ethtool_link_ksettings *cmd);
40 extern int mii_check_gmii_support(struct mii_if_info *mii);
41 extern void mii_check_link (struct mii_if_info *mii);
42 extern unsigned int mii_check_media (struct mii_if_info *mii,
43 				     unsigned int ok_to_print,
44 				     unsigned int init_media);
45 extern int generic_mii_ioctl(struct mii_if_info *mii_if,
46 			     struct mii_ioctl_data *mii_data, int cmd,
47 			     unsigned int *duplex_changed);
48 
49 
if_mii(struct ifreq * rq)50 static inline struct mii_ioctl_data *if_mii(struct ifreq *rq)
51 {
52 	return (struct mii_ioctl_data *) &rq->ifr_ifru;
53 }
54 
55 /**
56  * mii_nway_result
57  * @negotiated: value of MII ANAR and'd with ANLPAR
58  *
59  * Given a set of MII abilities, check each bit and returns the
60  * currently supported media, in the priority order defined by
61  * IEEE 802.3u.  We use LPA_xxx constants but note this is not the
62  * value of LPA solely, as described above.
63  *
64  * The one exception to IEEE 802.3u is that 100baseT4 is placed
65  * between 100T-full and 100T-half.  If your phy does not support
66  * 100T4 this is fine.  If your phy places 100T4 elsewhere in the
67  * priority order, you will need to roll your own function.
68  */
mii_nway_result(unsigned int negotiated)69 static inline unsigned int mii_nway_result (unsigned int negotiated)
70 {
71 	unsigned int ret;
72 
73 	if (negotiated & LPA_100FULL)
74 		ret = LPA_100FULL;
75 	else if (negotiated & LPA_100BASE4)
76 		ret = LPA_100BASE4;
77 	else if (negotiated & LPA_100HALF)
78 		ret = LPA_100HALF;
79 	else if (negotiated & LPA_10FULL)
80 		ret = LPA_10FULL;
81 	else
82 		ret = LPA_10HALF;
83 
84 	return ret;
85 }
86 
87 /**
88  * mii_duplex
89  * @duplex_lock: Non-zero if duplex is locked at full
90  * @negotiated: value of MII ANAR and'd with ANLPAR
91  *
92  * A small helper function for a common case.  Returns one
93  * if the media is operating or locked at full duplex, and
94  * returns zero otherwise.
95  */
mii_duplex(unsigned int duplex_lock,unsigned int negotiated)96 static inline unsigned int mii_duplex (unsigned int duplex_lock,
97 				       unsigned int negotiated)
98 {
99 	if (duplex_lock)
100 		return 1;
101 	if (mii_nway_result(negotiated) & LPA_DUPLEX)
102 		return 1;
103 	return 0;
104 }
105 
106 /**
107  * ethtool_adv_to_mii_adv_t
108  * @ethadv: the ethtool advertisement settings
109  *
110  * A small helper function that translates ethtool advertisement
111  * settings to phy autonegotiation advertisements for the
112  * MII_ADVERTISE register.
113  */
ethtool_adv_to_mii_adv_t(u32 ethadv)114 static inline u32 ethtool_adv_to_mii_adv_t(u32 ethadv)
115 {
116 	u32 result = 0;
117 
118 	if (ethadv & ADVERTISED_10baseT_Half)
119 		result |= ADVERTISE_10HALF;
120 	if (ethadv & ADVERTISED_10baseT_Full)
121 		result |= ADVERTISE_10FULL;
122 	if (ethadv & ADVERTISED_100baseT_Half)
123 		result |= ADVERTISE_100HALF;
124 	if (ethadv & ADVERTISED_100baseT_Full)
125 		result |= ADVERTISE_100FULL;
126 	if (ethadv & ADVERTISED_Pause)
127 		result |= ADVERTISE_PAUSE_CAP;
128 	if (ethadv & ADVERTISED_Asym_Pause)
129 		result |= ADVERTISE_PAUSE_ASYM;
130 
131 	return result;
132 }
133 
134 /**
135  * mii_adv_to_ethtool_adv_t
136  * @adv: value of the MII_ADVERTISE register
137  *
138  * A small helper function that translates MII_ADVERTISE bits
139  * to ethtool advertisement settings.
140  */
mii_adv_to_ethtool_adv_t(u32 adv)141 static inline u32 mii_adv_to_ethtool_adv_t(u32 adv)
142 {
143 	u32 result = 0;
144 
145 	if (adv & ADVERTISE_10HALF)
146 		result |= ADVERTISED_10baseT_Half;
147 	if (adv & ADVERTISE_10FULL)
148 		result |= ADVERTISED_10baseT_Full;
149 	if (adv & ADVERTISE_100HALF)
150 		result |= ADVERTISED_100baseT_Half;
151 	if (adv & ADVERTISE_100FULL)
152 		result |= ADVERTISED_100baseT_Full;
153 	if (adv & ADVERTISE_PAUSE_CAP)
154 		result |= ADVERTISED_Pause;
155 	if (adv & ADVERTISE_PAUSE_ASYM)
156 		result |= ADVERTISED_Asym_Pause;
157 
158 	return result;
159 }
160 
161 /**
162  * ethtool_adv_to_mii_ctrl1000_t
163  * @ethadv: the ethtool advertisement settings
164  *
165  * A small helper function that translates ethtool advertisement
166  * settings to phy autonegotiation advertisements for the
167  * MII_CTRL1000 register when in 1000T mode.
168  */
ethtool_adv_to_mii_ctrl1000_t(u32 ethadv)169 static inline u32 ethtool_adv_to_mii_ctrl1000_t(u32 ethadv)
170 {
171 	u32 result = 0;
172 
173 	if (ethadv & ADVERTISED_1000baseT_Half)
174 		result |= ADVERTISE_1000HALF;
175 	if (ethadv & ADVERTISED_1000baseT_Full)
176 		result |= ADVERTISE_1000FULL;
177 
178 	return result;
179 }
180 
181 /**
182  * mii_ctrl1000_to_ethtool_adv_t
183  * @adv: value of the MII_CTRL1000 register
184  *
185  * A small helper function that translates MII_CTRL1000
186  * bits, when in 1000Base-T mode, to ethtool
187  * advertisement settings.
188  */
mii_ctrl1000_to_ethtool_adv_t(u32 adv)189 static inline u32 mii_ctrl1000_to_ethtool_adv_t(u32 adv)
190 {
191 	u32 result = 0;
192 
193 	if (adv & ADVERTISE_1000HALF)
194 		result |= ADVERTISED_1000baseT_Half;
195 	if (adv & ADVERTISE_1000FULL)
196 		result |= ADVERTISED_1000baseT_Full;
197 
198 	return result;
199 }
200 
201 /**
202  * mii_lpa_to_ethtool_lpa_t
203  * @adv: value of the MII_LPA register
204  *
205  * A small helper function that translates MII_LPA
206  * bits, when in 1000Base-T mode, to ethtool
207  * LP advertisement settings.
208  */
mii_lpa_to_ethtool_lpa_t(u32 lpa)209 static inline u32 mii_lpa_to_ethtool_lpa_t(u32 lpa)
210 {
211 	u32 result = 0;
212 
213 	if (lpa & LPA_LPACK)
214 		result |= ADVERTISED_Autoneg;
215 
216 	return result | mii_adv_to_ethtool_adv_t(lpa);
217 }
218 
219 /**
220  * mii_stat1000_to_ethtool_lpa_t
221  * @adv: value of the MII_STAT1000 register
222  *
223  * A small helper function that translates MII_STAT1000
224  * bits, when in 1000Base-T mode, to ethtool
225  * advertisement settings.
226  */
mii_stat1000_to_ethtool_lpa_t(u32 lpa)227 static inline u32 mii_stat1000_to_ethtool_lpa_t(u32 lpa)
228 {
229 	u32 result = 0;
230 
231 	if (lpa & LPA_1000HALF)
232 		result |= ADVERTISED_1000baseT_Half;
233 	if (lpa & LPA_1000FULL)
234 		result |= ADVERTISED_1000baseT_Full;
235 
236 	return result;
237 }
238 
239 /**
240  * ethtool_adv_to_mii_adv_x
241  * @ethadv: the ethtool advertisement settings
242  *
243  * A small helper function that translates ethtool advertisement
244  * settings to phy autonegotiation advertisements for the
245  * MII_CTRL1000 register when in 1000Base-X mode.
246  */
ethtool_adv_to_mii_adv_x(u32 ethadv)247 static inline u32 ethtool_adv_to_mii_adv_x(u32 ethadv)
248 {
249 	u32 result = 0;
250 
251 	if (ethadv & ADVERTISED_1000baseT_Half)
252 		result |= ADVERTISE_1000XHALF;
253 	if (ethadv & ADVERTISED_1000baseT_Full)
254 		result |= ADVERTISE_1000XFULL;
255 	if (ethadv & ADVERTISED_Pause)
256 		result |= ADVERTISE_1000XPAUSE;
257 	if (ethadv & ADVERTISED_Asym_Pause)
258 		result |= ADVERTISE_1000XPSE_ASYM;
259 
260 	return result;
261 }
262 
263 /**
264  * mii_adv_to_ethtool_adv_x
265  * @adv: value of the MII_CTRL1000 register
266  *
267  * A small helper function that translates MII_CTRL1000
268  * bits, when in 1000Base-X mode, to ethtool
269  * advertisement settings.
270  */
mii_adv_to_ethtool_adv_x(u32 adv)271 static inline u32 mii_adv_to_ethtool_adv_x(u32 adv)
272 {
273 	u32 result = 0;
274 
275 	if (adv & ADVERTISE_1000XHALF)
276 		result |= ADVERTISED_1000baseT_Half;
277 	if (adv & ADVERTISE_1000XFULL)
278 		result |= ADVERTISED_1000baseT_Full;
279 	if (adv & ADVERTISE_1000XPAUSE)
280 		result |= ADVERTISED_Pause;
281 	if (adv & ADVERTISE_1000XPSE_ASYM)
282 		result |= ADVERTISED_Asym_Pause;
283 
284 	return result;
285 }
286 
287 /**
288  * mii_lpa_to_ethtool_lpa_x
289  * @adv: value of the MII_LPA register
290  *
291  * A small helper function that translates MII_LPA
292  * bits, when in 1000Base-X mode, to ethtool
293  * LP advertisement settings.
294  */
mii_lpa_to_ethtool_lpa_x(u32 lpa)295 static inline u32 mii_lpa_to_ethtool_lpa_x(u32 lpa)
296 {
297 	u32 result = 0;
298 
299 	if (lpa & LPA_LPACK)
300 		result |= ADVERTISED_Autoneg;
301 
302 	return result | mii_adv_to_ethtool_adv_x(lpa);
303 }
304 
305 /**
306  * mii_advertise_flowctrl - get flow control advertisement flags
307  * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
308  */
mii_advertise_flowctrl(int cap)309 static inline u16 mii_advertise_flowctrl(int cap)
310 {
311 	u16 adv = 0;
312 
313 	if (cap & FLOW_CTRL_RX)
314 		adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
315 	if (cap & FLOW_CTRL_TX)
316 		adv ^= ADVERTISE_PAUSE_ASYM;
317 
318 	return adv;
319 }
320 
321 /**
322  * mii_resolve_flowctrl_fdx
323  * @lcladv: value of MII ADVERTISE register
324  * @rmtadv: value of MII LPA register
325  *
326  * Resolve full duplex flow control as per IEEE 802.3-2005 table 28B-3
327  */
mii_resolve_flowctrl_fdx(u16 lcladv,u16 rmtadv)328 static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
329 {
330 	u8 cap = 0;
331 
332 	if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) {
333 		cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
334 	} else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) {
335 		if (lcladv & ADVERTISE_PAUSE_CAP)
336 			cap = FLOW_CTRL_RX;
337 		else if (rmtadv & ADVERTISE_PAUSE_CAP)
338 			cap = FLOW_CTRL_TX;
339 	}
340 
341 	return cap;
342 }
343 
344 #endif /* __LINUX_MII_H__ */
345