1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 /* 3 * Generic RTC interface. 4 * This version contains the part of the user interface to the Real Time Clock 5 * service. It is used with both the legacy mc146818 and also EFI 6 * Struct rtc_time and first 12 ioctl by Paul Gortmaker, 1996 - separated out 7 * from <linux/mc146818rtc.h> to this file for 2.4 kernels. 8 * 9 * Copyright (C) 1999 Hewlett-Packard Co. 10 * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com> 11 */ 12 #ifndef _UAPI_LINUX_RTC_H_ 13 #define _UAPI_LINUX_RTC_H_ 14 15 /* 16 * The struct used to pass data via the following ioctl. Similar to the 17 * struct tm in <time.h>, but it needs to be here so that the kernel 18 * source is self contained, allowing cross-compiles, etc. etc. 19 */ 20 21 struct rtc_time { 22 int tm_sec; 23 int tm_min; 24 int tm_hour; 25 int tm_mday; 26 int tm_mon; 27 int tm_year; 28 int tm_wday; 29 int tm_yday; 30 int tm_isdst; 31 }; 32 33 /* 34 * This data structure is inspired by the EFI (v0.92) wakeup 35 * alarm API. 36 */ 37 struct rtc_wkalrm { 38 unsigned char enabled; /* 0 = alarm disabled, 1 = alarm enabled */ 39 unsigned char pending; /* 0 = alarm not pending, 1 = alarm pending */ 40 struct rtc_time time; /* time the alarm is set to */ 41 }; 42 43 /* 44 * Data structure to control PLL correction some better RTC feature 45 * pll_value is used to get or set current value of correction, 46 * the rest of the struct is used to query HW capabilities. 47 * This is modeled after the RTC used in Q40/Q60 computers but 48 * should be sufficiently flexible for other devices 49 * 50 * +ve pll_value means clock will run faster by 51 * pll_value*pll_posmult/pll_clock 52 * -ve pll_value means clock will run slower by 53 * pll_value*pll_negmult/pll_clock 54 */ 55 56 struct rtc_pll_info { 57 int pll_ctrl; /* placeholder for fancier control */ 58 int pll_value; /* get/set correction value */ 59 int pll_max; /* max +ve (faster) adjustment value */ 60 int pll_min; /* max -ve (slower) adjustment value */ 61 int pll_posmult; /* factor for +ve correction */ 62 int pll_negmult; /* factor for -ve correction */ 63 long pll_clock; /* base PLL frequency */ 64 }; 65 66 /* 67 * ioctl calls that are permitted to the /dev/rtc interface, if 68 * any of the RTC drivers are enabled. 69 */ 70 71 #define RTC_AIE_ON _IO('p', 0x01) /* Alarm int. enable on */ 72 #define RTC_AIE_OFF _IO('p', 0x02) /* ... off */ 73 #define RTC_UIE_ON _IO('p', 0x03) /* Update int. enable on */ 74 #define RTC_UIE_OFF _IO('p', 0x04) /* ... off */ 75 #define RTC_PIE_ON _IO('p', 0x05) /* Periodic int. enable on */ 76 #define RTC_PIE_OFF _IO('p', 0x06) /* ... off */ 77 #define RTC_WIE_ON _IO('p', 0x0f) /* Watchdog int. enable on */ 78 #define RTC_WIE_OFF _IO('p', 0x10) /* ... off */ 79 80 #define RTC_ALM_SET _IOW('p', 0x07, struct rtc_time) /* Set alarm time */ 81 #define RTC_ALM_READ _IOR('p', 0x08, struct rtc_time) /* Read alarm time */ 82 #define RTC_RD_TIME _IOR('p', 0x09, struct rtc_time) /* Read RTC time */ 83 #define RTC_SET_TIME _IOW('p', 0x0a, struct rtc_time) /* Set RTC time */ 84 #define RTC_IRQP_READ _IOR('p', 0x0b, unsigned long) /* Read IRQ rate */ 85 #define RTC_IRQP_SET _IOW('p', 0x0c, unsigned long) /* Set IRQ rate */ 86 #define RTC_EPOCH_READ _IOR('p', 0x0d, unsigned long) /* Read epoch */ 87 #define RTC_EPOCH_SET _IOW('p', 0x0e, unsigned long) /* Set epoch */ 88 89 #define RTC_WKALM_SET _IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/ 90 #define RTC_WKALM_RD _IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/ 91 92 #define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */ 93 #define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */ 94 95 #define RTC_VL_READ _IOR('p', 0x13, int) /* Voltage low detector */ 96 #define RTC_VL_CLR _IO('p', 0x14) /* Clear voltage low information */ 97 98 /* interrupt flags */ 99 #define RTC_IRQF 0x80 /* Any of the following is active */ 100 #define RTC_PF 0x40 /* Periodic interrupt */ 101 #define RTC_AF 0x20 /* Alarm interrupt */ 102 #define RTC_UF 0x10 /* Update interrupt for 1Hz RTC */ 103 104 105 #define RTC_MAX_FREQ 8192 106 107 108 #endif /* _UAPI_LINUX_RTC_H_ */ 109