1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 /* 3 * This file holds Hub protocol constants and data structures that are 4 * defined in chapter 11 (Hub Specification) of the USB 2.0 specification. 5 * 6 * It is used/shared between the USB core, the HCDs and couple of other USB 7 * drivers. 8 */ 9 10 #ifndef __LINUX_CH11_H 11 #define __LINUX_CH11_H 12 13 #include <linux/types.h> /* __u8 etc */ 14 15 /* This is arbitrary. 16 * From USB 2.0 spec Table 11-13, offset 7, a hub can 17 * have up to 255 ports. The most yet reported is 10. 18 * 19 * Current Wireless USB host hardware (Intel i1480 for example) allows 20 * up to 22 devices to connect. Upcoming hardware might raise that 21 * limit. Because the arrays need to add a bit for hub status data, we 22 * use 31, so plus one evens out to four bytes. 23 */ 24 #define USB_MAXCHILDREN 31 25 26 /* See USB 3.1 spec Table 10-5 */ 27 #define USB_SS_MAXPORTS 15 28 29 /* 30 * Hub request types 31 */ 32 33 #define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) 34 #define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) 35 36 /* 37 * Port status type for GetPortStatus requests added in USB 3.1 38 * See USB 3.1 spec Table 10-12 39 */ 40 #define HUB_PORT_STATUS 0 41 #define HUB_PORT_PD_STATUS 1 42 #define HUB_EXT_PORT_STATUS 2 43 44 /* 45 * Hub class requests 46 * See USB 2.0 spec Table 11-16 47 */ 48 #define HUB_CLEAR_TT_BUFFER 8 49 #define HUB_RESET_TT 9 50 #define HUB_GET_TT_STATE 10 51 #define HUB_STOP_TT 11 52 53 /* 54 * Hub class additional requests defined by USB 3.0 spec 55 * See USB 3.0 spec Table 10-6 56 */ 57 #define HUB_SET_DEPTH 12 58 #define HUB_GET_PORT_ERR_COUNT 13 59 60 /* 61 * Hub Class feature numbers 62 * See USB 2.0 spec Table 11-17 63 */ 64 #define C_HUB_LOCAL_POWER 0 65 #define C_HUB_OVER_CURRENT 1 66 67 /* 68 * Port feature numbers 69 * See USB 2.0 spec Table 11-17 70 */ 71 #define USB_PORT_FEAT_CONNECTION 0 72 #define USB_PORT_FEAT_ENABLE 1 73 #define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ 74 #define USB_PORT_FEAT_OVER_CURRENT 3 75 #define USB_PORT_FEAT_RESET 4 76 #define USB_PORT_FEAT_L1 5 /* L1 suspend */ 77 #define USB_PORT_FEAT_POWER 8 78 #define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */ 79 #define USB_PORT_FEAT_C_CONNECTION 16 80 #define USB_PORT_FEAT_C_ENABLE 17 81 #define USB_PORT_FEAT_C_SUSPEND 18 82 #define USB_PORT_FEAT_C_OVER_CURRENT 19 83 #define USB_PORT_FEAT_C_RESET 20 84 #define USB_PORT_FEAT_TEST 21 85 #define USB_PORT_FEAT_INDICATOR 22 86 #define USB_PORT_FEAT_C_PORT_L1 23 87 88 /* 89 * Port feature selectors added by USB 3.0 spec. 90 * See USB 3.0 spec Table 10-7 91 */ 92 #define USB_PORT_FEAT_LINK_STATE 5 93 #define USB_PORT_FEAT_U1_TIMEOUT 23 94 #define USB_PORT_FEAT_U2_TIMEOUT 24 95 #define USB_PORT_FEAT_C_PORT_LINK_STATE 25 96 #define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 97 #define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 98 #define USB_PORT_FEAT_BH_PORT_RESET 28 99 #define USB_PORT_FEAT_C_BH_PORT_RESET 29 100 #define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 101 102 #define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8) 103 104 /* USB 3.0 hub remote wake mask bits, see table 10-14 */ 105 #define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) 106 #define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) 107 #define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10) 108 109 /* 110 * Hub Status and Hub Change results 111 * See USB 2.0 spec Table 11-19 and Table 11-20 112 * USB 3.1 extends the port status request and may return 4 additional bytes. 113 * See USB 3.1 spec section 10.16.2.6 Table 10-12 and 10-15 114 */ 115 struct usb_port_status { 116 __le16 wPortStatus; 117 __le16 wPortChange; 118 __le32 dwExtPortStatus; 119 } __attribute__ ((packed)); 120 121 /* 122 * wPortStatus bit field 123 * See USB 2.0 spec Table 11-21 124 */ 125 #define USB_PORT_STAT_CONNECTION 0x0001 126 #define USB_PORT_STAT_ENABLE 0x0002 127 #define USB_PORT_STAT_SUSPEND 0x0004 128 #define USB_PORT_STAT_OVERCURRENT 0x0008 129 #define USB_PORT_STAT_RESET 0x0010 130 #define USB_PORT_STAT_L1 0x0020 131 /* bits 6 to 7 are reserved */ 132 #define USB_PORT_STAT_POWER 0x0100 133 #define USB_PORT_STAT_LOW_SPEED 0x0200 134 #define USB_PORT_STAT_HIGH_SPEED 0x0400 135 #define USB_PORT_STAT_TEST 0x0800 136 #define USB_PORT_STAT_INDICATOR 0x1000 137 /* bits 13 to 15 are reserved */ 138 139 /* 140 * Additions to wPortStatus bit field from USB 3.0 141 * See USB 3.0 spec Table 10-10 142 */ 143 #define USB_PORT_STAT_LINK_STATE 0x01e0 144 #define USB_SS_PORT_STAT_POWER 0x0200 145 #define USB_SS_PORT_STAT_SPEED 0x1c00 146 #define USB_PORT_STAT_SPEED_5GBPS 0x0000 147 /* Valid only if port is enabled */ 148 /* Bits that are the same from USB 2.0 */ 149 #define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \ 150 USB_PORT_STAT_ENABLE | \ 151 USB_PORT_STAT_OVERCURRENT | \ 152 USB_PORT_STAT_RESET) 153 154 /* 155 * Definitions for PORT_LINK_STATE values 156 * (bits 5-8) in wPortStatus 157 */ 158 #define USB_SS_PORT_LS_U0 0x0000 159 #define USB_SS_PORT_LS_U1 0x0020 160 #define USB_SS_PORT_LS_U2 0x0040 161 #define USB_SS_PORT_LS_U3 0x0060 162 #define USB_SS_PORT_LS_SS_DISABLED 0x0080 163 #define USB_SS_PORT_LS_RX_DETECT 0x00a0 164 #define USB_SS_PORT_LS_SS_INACTIVE 0x00c0 165 #define USB_SS_PORT_LS_POLLING 0x00e0 166 #define USB_SS_PORT_LS_RECOVERY 0x0100 167 #define USB_SS_PORT_LS_HOT_RESET 0x0120 168 #define USB_SS_PORT_LS_COMP_MOD 0x0140 169 #define USB_SS_PORT_LS_LOOPBACK 0x0160 170 171 /* 172 * wPortChange bit field 173 * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10 174 * Bits 0 to 5 shown, bits 6 to 15 are reserved 175 */ 176 #define USB_PORT_STAT_C_CONNECTION 0x0001 177 #define USB_PORT_STAT_C_ENABLE 0x0002 178 #define USB_PORT_STAT_C_SUSPEND 0x0004 179 #define USB_PORT_STAT_C_OVERCURRENT 0x0008 180 #define USB_PORT_STAT_C_RESET 0x0010 181 #define USB_PORT_STAT_C_L1 0x0020 182 /* 183 * USB 3.0 wPortChange bit fields 184 * See USB 3.0 spec Table 10-11 185 */ 186 #define USB_PORT_STAT_C_BH_RESET 0x0020 187 #define USB_PORT_STAT_C_LINK_STATE 0x0040 188 #define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 189 190 /* 191 * USB 3.1 dwExtPortStatus field masks 192 * See USB 3.1 spec 10.16.2.6.3 Table 10-15 193 */ 194 195 #define USB_EXT_PORT_STAT_RX_SPEED_ID 0x0000000f 196 #define USB_EXT_PORT_STAT_TX_SPEED_ID 0x000000f0 197 #define USB_EXT_PORT_STAT_RX_LANES 0x00000f00 198 #define USB_EXT_PORT_STAT_TX_LANES 0x0000f000 199 200 #define USB_EXT_PORT_RX_LANES(p) \ 201 (((p) & USB_EXT_PORT_STAT_RX_LANES) >> 8) 202 #define USB_EXT_PORT_TX_LANES(p) \ 203 (((p) & USB_EXT_PORT_STAT_TX_LANES) >> 12) 204 205 /* 206 * wHubCharacteristics (masks) 207 * See USB 2.0 spec Table 11-13, offset 3 208 */ 209 #define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ 210 #define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ 211 #define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ 212 #define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ 213 214 #define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ 215 216 #define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ 217 #define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ 218 #define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ 219 #define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ 220 221 #define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ 222 #define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ 223 224 struct usb_hub_status { 225 __le16 wHubStatus; 226 __le16 wHubChange; 227 } __attribute__ ((packed)); 228 229 /* 230 * Hub Status & Hub Change bit masks 231 * See USB 2.0 spec Table 11-19 and Table 11-20 232 * Bits 0 and 1 for wHubStatus and wHubChange 233 * Bits 2 to 15 are reserved for both 234 */ 235 #define HUB_STATUS_LOCAL_POWER 0x0001 236 #define HUB_STATUS_OVERCURRENT 0x0002 237 #define HUB_CHANGE_LOCAL_POWER 0x0001 238 #define HUB_CHANGE_OVERCURRENT 0x0002 239 240 241 /* 242 * Hub descriptor 243 * See USB 2.0 spec Table 11-13 244 */ 245 246 #define USB_DT_HUB (USB_TYPE_CLASS | 0x09) 247 #define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a) 248 #define USB_DT_HUB_NONVAR_SIZE 7 249 #define USB_DT_SS_HUB_SIZE 12 250 251 /* 252 * Hub Device descriptor 253 * USB Hub class device protocols 254 */ 255 256 #define USB_HUB_PR_FS 0 /* Full speed hub */ 257 #define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ 258 #define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ 259 #define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ 260 #define USB_HUB_PR_SS 3 /* Super speed hub */ 261 262 struct usb_hub_descriptor { 263 __u8 bDescLength; 264 __u8 bDescriptorType; 265 __u8 bNbrPorts; 266 __le16 wHubCharacteristics; 267 __u8 bPwrOn2PwrGood; 268 __u8 bHubContrCurrent; 269 270 /* 2.0 and 3.0 hubs differ here */ 271 union { 272 struct { 273 /* add 1 bit for hub status change; round to bytes */ 274 __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; 275 __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; 276 } __attribute__ ((packed)) hs; 277 278 struct { 279 __u8 bHubHdrDecLat; 280 __le16 wHubDelay; 281 __le16 DeviceRemovable; 282 } __attribute__ ((packed)) ss; 283 } u; 284 } __attribute__ ((packed)); 285 286 /* port indicator status selectors, tables 11-7 and 11-25 */ 287 #define HUB_LED_AUTO 0 288 #define HUB_LED_AMBER 1 289 #define HUB_LED_GREEN 2 290 #define HUB_LED_OFF 3 291 292 enum hub_led_mode { 293 INDICATOR_AUTO = 0, 294 INDICATOR_CYCLE, 295 /* software blinks for attention: software, hardware, reserved */ 296 INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, 297 INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, 298 INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF 299 } __attribute__ ((packed)); 300 301 /* Transaction Translator Think Times, in bits */ 302 #define HUB_TTTT_8_BITS 0x00 303 #define HUB_TTTT_16_BITS 0x20 304 #define HUB_TTTT_24_BITS 0x40 305 #define HUB_TTTT_32_BITS 0x60 306 307 #endif /* __LINUX_CH11_H */ 308