xref: /wlan-driver/fw-api/hw/qca5332/rx_mpdu_start.h (revision 5113495b16420b49004c444715d2daae2066e7dc)

/* Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */










#ifndef _RX_MPDU_START_H_
#define _RX_MPDU_START_H_
#if !defined(__ASSEMBLER__)
#endif

#include "rx_mpdu_info.h"
#define NUM_OF_DWORDS_RX_MPDU_START 30

#define NUM_OF_QWORDS_RX_MPDU_START 15


struct rx_mpdu_start {
#ifndef WIFI_BIT_ORDER_BIG_ENDIAN
             struct   rx_mpdu_info                                              rx_mpdu_info_details;
#else
             struct   rx_mpdu_info                                              rx_mpdu_info_details;
#endif
};


/* Description		RX_MPDU_INFO_DETAILS

			Structure containing all the MPDU header details that might
			 be needed for other modules further down the received path

*/


/* Description		RXPT_CLASSIFY_INFO_DETAILS

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			RXOLE related classification info
			<legal all
*/


/* Description		REO_DESTINATION_INDICATION

			The ID of the REO exit ring where the MSDU frame shall push
			 after (MPDU level) reordering has finished.

			<enum 0 reo_destination_sw0> Reo will push the frame into
			 the REO2SW0 ring
			<enum 1 reo_destination_sw1> Reo will push the frame into
			 the REO2SW1 ring
			<enum 2 reo_destination_sw2> Reo will push the frame into
			 the REO2SW2 ring
			<enum 3 reo_destination_sw3> Reo will push the frame into
			 the REO2SW3 ring
			<enum 4 reo_destination_sw4> Reo will push the frame into
			 the REO2SW4 ring
			<enum 5 reo_destination_release> Reo will push the frame
			 into the REO_release ring
			<enum 6 reo_destination_fw> Reo will push the frame into
			 the REO2FW ring
			<enum 7 reo_destination_sw5> Reo will push the frame into
			 the REO2SW5 ring (REO remaps this in chips without REO2SW5
			 ring, e.g. Pine)
			<enum 8 reo_destination_sw6> Reo will push the frame into
			 the REO2SW6 ring (REO remaps this in chips without REO2SW6
			 ring, e.g. Pine)
			<enum 9 reo_destination_sw7> Reo will push the frame into
			 the REO2SW7 ring (REO remaps this in chips without REO2SW7
			 ring)
			<enum 10 reo_destination_sw8> Reo will push the frame into
			 the REO2SW8 ring (REO remaps this in chips without REO2SW8
			 ring)
			<enum 11 reo_destination_11> REO remaps this
			<enum 12 reo_destination_12> REO remaps this <enum 13 reo_destination_13>
			REO remaps this
			<enum 14 reo_destination_14> REO remaps this
			<enum 15 reo_destination_15> REO remaps this
			<enum 16 reo_destination_16> REO remaps this
			<enum 17 reo_destination_17> REO remaps this
			<enum 18 reo_destination_18> REO remaps this
			<enum 19 reo_destination_19> REO remaps this
			<enum 20 reo_destination_20> REO remaps this
			<enum 21 reo_destination_21> REO remaps this
			<enum 22 reo_destination_22> REO remaps this
			<enum 23 reo_destination_23> REO remaps this
			<enum 24 reo_destination_24> REO remaps this
			<enum 25 reo_destination_25> REO remaps this
			<enum 26 reo_destination_26> REO remaps this
			<enum 27 reo_destination_27> REO remaps this
			<enum 28 reo_destination_28> REO remaps this
			<enum 29 reo_destination_29> REO remaps this
			<enum 30 reo_destination_30> REO remaps this
			<enum 31 reo_destination_31> REO remaps this

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_REO_DESTINATION_INDICATION_OFFSET 0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_REO_DESTINATION_INDICATION_LSB 0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_REO_DESTINATION_INDICATION_MSB 4
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_REO_DESTINATION_INDICATION_MASK 0x000000000000001f


/* Description		LMAC_PEER_ID_MSB

			If use_flow_id_toeplitz_clfy is set and lmac_peer_id_'sb
			 is 2'b00, Rx OLE uses a REO desination indicati'n of {1'b1,
			hash[3:0]} using the chosen Toeplitz hash from Common Parser
			 if flow search fails.
			If use_flow_id_toeplitz_clfy is set and lmac_peer_id_msb
			 's not 2'b00, Rx OLE uses a REO desination indication of
			 {lmac_peer_id_msb, hash[2:0]} using the chosen Toeplitz
			 hash from Common Parser if flow search fails.
			This LMAC/peer-based routing is not supported in Hastings80
			 and HastingsPrime.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_LMAC_PEER_ID_MSB_OFFSET 0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_LMAC_PEER_ID_MSB_LSB 5
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_LMAC_PEER_ID_MSB_MSB 6
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_LMAC_PEER_ID_MSB_MASK 0x0000000000000060


/* Description		USE_FLOW_ID_TOEPLITZ_CLFY

			Indication to Rx OLE to enable REO destination routing based
			 on the chosen Toeplitz hash from Common Parser, in case
			 flow search fails
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_USE_FLOW_ID_TOEPLITZ_CLFY_OFFSET 0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_USE_FLOW_ID_TOEPLITZ_CLFY_LSB 7
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_USE_FLOW_ID_TOEPLITZ_CLFY_MSB 7
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_USE_FLOW_ID_TOEPLITZ_CLFY_MASK 0x0000000000000080


/* Description		PKT_SELECTION_FP_UCAST_DATA

			Filter pass Unicast data frame (matching rxpcu_filter_pass
			 and sw_frame_group_Unicast_data) routing selection
			TODO: What about 'rxpcu_filter_pass_monior_ovrd'?

			1'b0: source and destination rings are selected from the
			 RxOLE register settings for the packet type

			1'b1: source ring and destination ring is selected from
			the rxdma0_source_ring_selection and rxdma0_destination_ring_selection
			 fields in this STRUCT
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_UCAST_DATA_OFFSET 0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_UCAST_DATA_LSB 8
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_UCAST_DATA_MSB 8
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_UCAST_DATA_MASK 0x0000000000000100


/* Description		PKT_SELECTION_FP_MCAST_DATA

			Filter pass Multicast data frame (matching rxpcu_filter_pass
			 and sw_frame_group_Multicast_data) routing selection
			TODO: What about 'rxpcu_filter_pass_monior_ovrd'?

			1'b0: source and destination rings are selected from the
			 RxOLE register settings for the packet type

			1'b1: source ring and destination ring is selected from
			the rxdma0_source_ring_selection and rxdma0_destination_ring_selection
			 fields in this STRUCT
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_MCAST_DATA_OFFSET 0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_MCAST_DATA_LSB 9
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_MCAST_DATA_MSB 9
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_MCAST_DATA_MASK 0x0000000000000200


/* Description		PKT_SELECTION_FP_1000

			Filter pass BAR frame (matching rxpcu_filter_pass and sw_frame_group_ctrl_1000)
			routing selection
			TODO: What about 'rxpcu_filter_pass_monior_ovrd'?

			1'b0: source and destination rings are selected from the
			 RxOLE register settings for the packet type

			1'b1: source ring and destination ring is selected from
			the rxdma0_source_ring_selection and rxdma0_destination_ring_selection
			 fields in this STRUCT
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_1000_OFFSET 0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_1000_LSB 10
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_1000_MSB 10
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_1000_MASK 0x0000000000000400


/* Description		RXDMA0_SOURCE_RING_SELECTION

			Field only valid when for the received frame type the corresponding
			 pkt_selection_fp_... bit is set

			<enum 0 sw2rxdma0_0_buf_source_ring> The data buffer for
			 this frame shall be sourced by sw2rxdma0 buffer source
			ring.
			<enum 1 fw2rxdma0_pmac0_buf_source_ring> The data buffer
			 for this frame shall be sourced by fw2rxdma buffer source
			 ring for PMAC0.
			<enum 2 sw2rxdma0_1_buf_source_ring> The data buffer for
			 this frame shall be sourced by sw2rxdma1 buffer source
			ring.
			<enum 3 no_buffer_rxdma0_ring> The frame shall not be written
			 to any data buffer.
			<enum 4 sw2rxdma0_exception_buf_source_ring> The data buffer
			 for this frame shall be sourced by sw2rxdma_exception buffer
			 source ring.
			<enum 5 fw2rxdma0_pmac1_buf_source_ring> The data buffer
			 for this frame shall be sourced by fw2rxdma buffer source
			 ring for PMAC1.

			<legal 0-5>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_SOURCE_RING_SELECTION_OFFSET 0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_SOURCE_RING_SELECTION_LSB 11
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_SOURCE_RING_SELECTION_MSB 13
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_SOURCE_RING_SELECTION_MASK 0x0000000000003800


/* Description		RXDMA0_DESTINATION_RING_SELECTION

			Field only valid when for the received frame type the corresponding
			 pkt_selection_fp_... bit is set

			<enum 0  rxdma_release_ring> RXDMA0 shall push the frame
			 to the Release ring. Effectively this means the frame needs
			 to be dropped.
			<enum 1  rxdma2fw_pmac0_ring> RXDMA0 shall push the frame
			 to the FW ring for PMAC0.
			<enum 2  rxdma2sw_ring> RXDMA0 shall push the frame to the
			 SW ring.
			<enum 3  rxdma2reo_ring> RXDMA0 shall push the frame to
			the REO entrance ring.
			<enum 4  rxdma2fw_pmac1_ring> RXDMA0 shall push the frame
			 to the FW ring for PMAC1.
			<enum 5 rxdma2reo_remote0_ring> RXDMA0 shall push the frame
			 to the first MLO REO entrance ring.
			<enum 6 rxdma2reo_remote1_ring> RXDMA0 shall push the frame
			 to the second MLO REO entrance ring.

			<legal 0-6>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_DESTINATION_RING_SELECTION_OFFSET 0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_DESTINATION_RING_SELECTION_LSB 14
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_DESTINATION_RING_SELECTION_MSB 16
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_DESTINATION_RING_SELECTION_MASK 0x000000000001c000


/* Description		MCAST_ECHO_DROP_ENABLE

			If set, for multicast packets, multicast echo check (i.e.
			SA search with mcast_echo_check = 1) shall be performed
			by RXOLE, and any multicast echo packets should be indicated
			 to RXDMA for release to WBM

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_MCAST_ECHO_DROP_ENABLE_OFFSET 0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_MCAST_ECHO_DROP_ENABLE_LSB 17
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_MCAST_ECHO_DROP_ENABLE_MSB 17
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_MCAST_ECHO_DROP_ENABLE_MASK 0x0000000000020000


/* Description		WDS_LEARNING_DETECT_EN

			If set, WDS learning detection based on SA search and notification
			 to FW (using RXDMA0 status ring) is enabled and the "timestamp"
			field in address search failure cache-only entry should
			be used to avoid multiple WDS learning notifications.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_WDS_LEARNING_DETECT_EN_OFFSET 0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_WDS_LEARNING_DETECT_EN_LSB 18
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_WDS_LEARNING_DETECT_EN_MSB 18
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_WDS_LEARNING_DETECT_EN_MASK 0x0000000000040000


/* Description		INTRABSS_CHECK_EN

			If set, intra-BSS routing detection is enabled

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_INTRABSS_CHECK_EN_OFFSET 0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_INTRABSS_CHECK_EN_LSB 19
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_INTRABSS_CHECK_EN_MSB 19
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_INTRABSS_CHECK_EN_MASK 0x0000000000080000


/* Description		USE_PPE

			Indicates to RXDMA to ignore the REO_destination_indication
			 and use a programmed value corresponding to the REO2PPE
			 ring

			This override to REO2PPE for packets requiring multiple
			buffers shall be disabled based on an RXDMA configuration,
			as PPE may not support such packets.

			Supported only in full AP chips like Waikiki, not in client/soft
			 AP chips like Hamilton
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_USE_PPE_OFFSET 0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_USE_PPE_LSB   20
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_USE_PPE_MSB   20
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_USE_PPE_MASK  0x0000000000100000


/* Description		PPE_ROUTING_ENABLE

			Global enable/disable bit for routing to PPE, used to disable
			 PPE routing even if RXOLE CCE or flow search indicate 'Use_PPE'


			This is set by SW for peers which are being handled by a
			 host SW/accelerator subsystem that also handles packet
			buffer management for WiFi-to-PPE routing.

			This is cleared by SW for peers which are being handled
			by a different subsystem, completely disabling WiFi-to-PPE
			 routing for such peers.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PPE_ROUTING_ENABLE_OFFSET 0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PPE_ROUTING_ENABLE_LSB 21
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PPE_ROUTING_ENABLE_MSB 21
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_PPE_ROUTING_ENABLE_MASK 0x0000000000200000


/* Description		RESERVED_0B

			<legal 0>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0B_OFFSET 0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0B_LSB 22
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0B_MSB 31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0B_MASK 0x00000000ffc00000


/* Description		RX_REO_QUEUE_DESC_ADDR_31_0

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			Address (lower 32 bits) of the REO queue descriptor.

			If no Peer entry lookup happened for this frame, the value
			 wil be set to 0, and the frame shall never be pushed to
			 REO entrance ring.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_31_0_OFFSET       0x0000000000000000
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_31_0_LSB          32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_31_0_MSB          63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_31_0_MASK         0xffffffff00000000


/* Description		RX_REO_QUEUE_DESC_ADDR_39_32

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			Address (upper 8 bits) of the REO queue descriptor.

			If no Peer entry lookup happened for this frame, the value
			 wil be set to 0, and the frame shall never be pushed to
			 REO entrance ring.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_39_32_OFFSET      0x0000000000000008
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_39_32_LSB         0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_39_32_MSB         7
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_REO_QUEUE_DESC_ADDR_39_32_MASK        0x00000000000000ff


/* Description		RECEIVE_QUEUE_NUMBER

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			Indicates the MPDU queue ID to which this MPDU link descriptor
			 belongs
			Used for tracking and debugging
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RECEIVE_QUEUE_NUMBER_OFFSET              0x0000000000000008
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RECEIVE_QUEUE_NUMBER_LSB                 8
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RECEIVE_QUEUE_NUMBER_MSB                 23
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RECEIVE_QUEUE_NUMBER_MASK                0x0000000000ffff00


/* Description		PRE_DELIM_ERR_WARNING

			Indicates that a delimiter FCS error was found in between
			 the Previous MPDU and this MPDU.

			Note that this is just a warning, and does not mean that
			 this MPDU is corrupted in any way. If it is, there will
			 be other errors indicated such as FCS or decrypt errors


			In case of ndp or phy_err, this field will indicate at least
			 one of delimiters located after the last MPDU in the previous
			 PPDU has been corrupted.
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PRE_DELIM_ERR_WARNING_OFFSET             0x0000000000000008
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PRE_DELIM_ERR_WARNING_LSB                24
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PRE_DELIM_ERR_WARNING_MSB                24
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PRE_DELIM_ERR_WARNING_MASK               0x0000000001000000


/* Description		FIRST_DELIM_ERR

			Indicates that the first delimiter had a FCS failure.  Only
			 valid when first_mpdu and first_msdu are set.

			In case of ndp or phy_err, this field will never be set.

*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FIRST_DELIM_ERR_OFFSET                   0x0000000000000008
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FIRST_DELIM_ERR_LSB                      25
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FIRST_DELIM_ERR_MSB                      25
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FIRST_DELIM_ERR_MASK                     0x0000000002000000


/* Description		RESERVED_2A

			<legal 0>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_2A_OFFSET                       0x0000000000000008
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_2A_LSB                          26
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_2A_MSB                          31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_2A_MASK                         0x00000000fc000000


/* Description		PN_31_0

			Field only valid when Frame_encryption_info_valid is set


			Bits [31:0] of the PN number extracted from the IV field

			WEP: IV = {key_id_octet, pn2, pn1, pn0}.  Only pn[23:0]
			is valid.
			TKIP: IV = {pn5, pn4, pn3, pn2, key_id_octet, pn0, WEPSeed[1],
			pn1}.  Only pn[47:0] is valid.
			AES-CCM: IV = {pn5, pn4, pn3, pn2, key_id_octet, 0x0, pn1,
			pn0}.  Only pn[47:0] is valid.
			WAPI: IV = {key_id_octet, 0x0, pn15, pn14, pn13, pn12, pn11,
			pn10, pn9, pn8, pn7, pn6, pn5, pn4, pn3, pn2, pn1, pn0}.
			 pn[127:0] are valid.

			In case of ndp or phy_err, this field will never be set.

*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_31_0_OFFSET                           0x0000000000000008
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_31_0_LSB                              32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_31_0_MSB                              63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_31_0_MASK                             0xffffffff00000000


/* Description		PN_63_32

			Field only valid when Frame_encryption_info_valid is set


			Bits [63:32] of the PN number.   See description for pn_31_0.


			In case of ndp or phy_err, this field will never be set.

*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_63_32_OFFSET                          0x0000000000000010
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_63_32_LSB                             0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_63_32_MSB                             31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_63_32_MASK                            0x00000000ffffffff


/* Description		PN_95_64

			Field only valid when Frame_encryption_info_valid is set


			Bits [95:64] of the PN number.  See description for pn_31_0.


			In case of ndp or phy_err, this field will never be set.

*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_95_64_OFFSET                          0x0000000000000010
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_95_64_LSB                             32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_95_64_MSB                             63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_95_64_MASK                            0xffffffff00000000


/* Description		PN_127_96

			Field only valid when Frame_encryption_info_valid is set


			Bits [127:96] of the PN number.  See description for pn_31_0.


			In case of ndp or phy_err, this field will never be set.

*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_127_96_OFFSET                         0x0000000000000018
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_127_96_LSB                            0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_127_96_MSB                            31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PN_127_96_MASK                           0x00000000ffffffff


/* Description		EPD_EN

			Field only valid when AST_based_lookup_valid == 1.


			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			If set to one use EPD instead of LPD

			In case of ndp or phy_err, this field will never be set.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_EPD_EN_OFFSET                            0x0000000000000018
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_EPD_EN_LSB                               32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_EPD_EN_MSB                               32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_EPD_EN_MASK                              0x0000000100000000


/* Description		ALL_FRAMES_SHALL_BE_ENCRYPTED

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			When set, all frames (data only ?) shall be encrypted. If
			 not, RX CRYPTO shall set an error flag.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ALL_FRAMES_SHALL_BE_ENCRYPTED_OFFSET     0x0000000000000018
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ALL_FRAMES_SHALL_BE_ENCRYPTED_LSB        33
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ALL_FRAMES_SHALL_BE_ENCRYPTED_MSB        33
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ALL_FRAMES_SHALL_BE_ENCRYPTED_MASK       0x0000000200000000


/* Description		ENCRYPT_TYPE

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			Indicates type of decrypt cipher used (as defined in the
			 peer entry)

			<enum 0 wep_40> WEP 40-bit
			<enum 1 wep_104> WEP 104-bit
			<enum 2 tkip_no_mic> TKIP without MIC
			<enum 3 wep_128> WEP 128-bit
			<enum 4 tkip_with_mic> TKIP with MIC
			<enum 5 wapi> WAPI
			<enum 6 aes_ccmp_128> AES CCMP 128
			<enum 7 no_cipher> No crypto
			<enum 8 aes_ccmp_256> AES CCMP 256
			<enum 9 aes_gcmp_128> AES CCMP 128
			<enum 10 aes_gcmp_256> AES CCMP 256
			<enum 11 wapi_gcm_sm4> WAPI GCM SM4

			<enum 12 wep_varied_width> WEP encryption. As for WEP per
			 keyid the key bit width can vary, the key bit width for
			 this MPDU will be indicated in field wep_key_width_for_variable
			 key
			<legal 0-12>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ENCRYPT_TYPE_OFFSET                      0x0000000000000018
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ENCRYPT_TYPE_LSB                         34
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ENCRYPT_TYPE_MSB                         37
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ENCRYPT_TYPE_MASK                        0x0000003c00000000


/* Description		WEP_KEY_WIDTH_FOR_VARIABLE_KEY

			Field only valid when key_type is set to wep_varied_width.


			This field indicates the size of the wep key for this MPDU.


			<enum 0 wep_varied_width_40> WEP 40-bit
			<enum 1 wep_varied_width_104> WEP 104-bit
			<enum 2 wep_varied_width_128> WEP 128-bit

			<legal 0-2>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_WEP_KEY_WIDTH_FOR_VARIABLE_KEY_OFFSET    0x0000000000000018
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_WEP_KEY_WIDTH_FOR_VARIABLE_KEY_LSB       38
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_WEP_KEY_WIDTH_FOR_VARIABLE_KEY_MSB       39
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_WEP_KEY_WIDTH_FOR_VARIABLE_KEY_MASK      0x000000c000000000


/* Description		MESH_STA

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			When set, this is a Mesh (11s) STA.

			The interpretation of the A-MSDU 'Length' field in the MPDU
			 (if any) is decided by the e-numerations below.

			<enum 0 MESH_DISABLE>
			<enum 1 MESH_Q2Q> A-MSDU 'Length' is big endian and includes
			 the length of Mesh Control.
			<enum 2 MESH_11S_BE> A-MSDU 'Length' is big endian and excludes
			 the length of Mesh Control.
			<enum 3 MESH_11S_LE> A-MSDU 'Length' is little endian and
			 excludes the length of Mesh Control. This is 802.11s-compliant.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MESH_STA_OFFSET                          0x0000000000000018
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MESH_STA_LSB                             40
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MESH_STA_MSB                             41
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MESH_STA_MASK                            0x0000030000000000


/* Description		BSSID_HIT

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			When set, the BSSID of the incoming frame matched one of
			 the 8 BSSID register values

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_BSSID_HIT_OFFSET                         0x0000000000000018
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_BSSID_HIT_LSB                            42
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_BSSID_HIT_MSB                            42
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_BSSID_HIT_MASK                           0x0000040000000000


/* Description		BSSID_NUMBER

			Field only valid when bssid_hit is set.

			This number indicates which one out of the 8 BSSID register
			 values matched the incoming frame
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_BSSID_NUMBER_OFFSET                      0x0000000000000018
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_BSSID_NUMBER_LSB                         43
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_BSSID_NUMBER_MSB                         46
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_BSSID_NUMBER_MASK                        0x0000780000000000


/* Description		TID

			Field only valid when mpdu_qos_control_valid is set

			The TID field in the QoS control field
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_TID_OFFSET                               0x0000000000000018
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_TID_LSB                                  47
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_TID_MSB                                  50
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_TID_MASK                                 0x0007800000000000


/* Description		RESERVED_7A

			<legal 0>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_7A_OFFSET                       0x0000000000000018
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_7A_LSB                          51
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_7A_MSB                          63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_7A_MASK                         0xfff8000000000000


/* Description		PEER_META_DATA

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			Meta data that SW has programmed in the Peer table entry
			 of the transmitting STA.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PEER_META_DATA_OFFSET                    0x0000000000000020
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PEER_META_DATA_LSB                       0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PEER_META_DATA_MSB                       31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PEER_META_DATA_MASK                      0x00000000ffffffff


/* Description		RXPCU_MPDU_FILTER_IN_CATEGORY

			Field indicates what the reason was that this MPDU frame
			 was allowed to come into the receive path by RXPCU
			<enum 0 rxpcu_filter_pass> This MPDU passed the normal frame
			 filter programming of rxpcu
			<enum 1 rxpcu_monitor_client> This MPDU did NOT pass the
			 regular frame filter and would have been dropped, were
			it not for the frame fitting into the 'monitor_client' category.

			<enum 2 rxpcu_monitor_other> This MPDU did NOT pass the
			regular frame filter and also did not pass the rxpcu_monitor_client
			 filter. It would have been dropped accept that it did pass
			 the 'monitor_other' category.
			<enum 3 rxpcu_filter_pass_monitor_ovrd> This MPDU passed
			 the normal frame filter programming of RXPCU but additionally
			 fit into the 'monitor_override_client' category.

			Note: for ndp frame, if it was expected because the preceding
			 NDPA was filter_pass, the setting  rxpcu_filter_pass will
			 be used. This setting will also be used for every ndp frame
			 in case Promiscuous mode is enabled.

			In case promiscuous is not enabled, and an NDP is not preceded
			 by a NPDA filter pass frame, the only other setting that
			 could appear here for the NDP is rxpcu_monitor_other.
			(rxpcu has a configuration bit specifically for this scenario)


			Note: for
			<legal 0-3>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPCU_MPDU_FILTER_IN_CATEGORY_OFFSET     0x0000000000000020
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPCU_MPDU_FILTER_IN_CATEGORY_LSB        32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPCU_MPDU_FILTER_IN_CATEGORY_MSB        33
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RXPCU_MPDU_FILTER_IN_CATEGORY_MASK       0x0000000300000000


/* Description		SW_FRAME_GROUP_ID

			SW processes frames based on certain classifications. This
			 field indicates to what sw classification this MPDU is
			mapped.
			The classification is given in priority order

			<enum 0 sw_frame_group_NDP_frame> Note: The corresponding
			 Rxpcu_Mpdu_filter_in_category can be rxpcu_filter_pass
			or rxpcu_monitor_other

			<enum 1 sw_frame_group_Multicast_data>
			<enum 2 sw_frame_group_Unicast_data>
			<enum 3 sw_frame_group_Null_data > This includes mpdus of
			 type Data Null.
			Hamilton v1 included QoS Data Null as well here.
			<enum 38 sw_frame_group_QoS_Null_data> This includes QoS
			 Null frames except in UL MU or TB PPDUs.
			<enum 39 sw_frame_group_QoS_Null_data_TB> This includes
			QoS Null frames in UL MU or TB PPDUs.

			<enum 4 sw_frame_group_mgmt_0000 >
			<enum 5 sw_frame_group_mgmt_0001 >
			<enum 6 sw_frame_group_mgmt_0010 >
			<enum 7 sw_frame_group_mgmt_0011 >
			<enum 8 sw_frame_group_mgmt_0100 >
			<enum 9 sw_frame_group_mgmt_0101 >
			<enum 10 sw_frame_group_mgmt_0110 >
			<enum 11 sw_frame_group_mgmt_0111 >
			<enum 12 sw_frame_group_mgmt_1000 >
			<enum 13 sw_frame_group_mgmt_1001 >
			<enum 14 sw_frame_group_mgmt_1010 >
			<enum 15 sw_frame_group_mgmt_1011 >
			<enum 16 sw_frame_group_mgmt_1100 >
			<enum 17 sw_frame_group_mgmt_1101 >
			<enum 18 sw_frame_group_mgmt_1110 >
			<enum 19 sw_frame_group_mgmt_1111 >

			<enum 20 sw_frame_group_ctrl_0000 >
			<enum 21 sw_frame_group_ctrl_0001 >
			<enum 22 sw_frame_group_ctrl_0010 >
			<enum 23 sw_frame_group_ctrl_0011 >
			<enum 24 sw_frame_group_ctrl_0100 >
			<enum 25 sw_frame_group_ctrl_0101 >
			<enum 26 sw_frame_group_ctrl_0110 >
			<enum 27 sw_frame_group_ctrl_0111 >
			<enum 28 sw_frame_group_ctrl_1000 >
			<enum 29 sw_frame_group_ctrl_1001 >
			<enum 30 sw_frame_group_ctrl_1010 >
			<enum 31 sw_frame_group_ctrl_1011 >
			<enum 32 sw_frame_group_ctrl_1100 >
			<enum 33 sw_frame_group_ctrl_1101 >
			<enum 34 sw_frame_group_ctrl_1110 >
			<enum 35 sw_frame_group_ctrl_1111 >

			<enum 36 sw_frame_group_unsupported> This covers type 3
			and protocol version != 0
			Note: The corresponding Rxpcu_Mpdu_filter_in_category can
			 only be rxpcu_monitor_other

			<enum 37 sw_frame_group_phy_error> PHY reported an error

			Note: The corresponding Rxpcu_Mpdu_filter_in_category can
			 be rxpcu_filter_pass

			<legal 0-39>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SW_FRAME_GROUP_ID_OFFSET                 0x0000000000000020
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SW_FRAME_GROUP_ID_LSB                    34
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SW_FRAME_GROUP_ID_MSB                    40
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SW_FRAME_GROUP_ID_MASK                   0x000001fc00000000


/* Description		NDP_FRAME

			When set, the received frame was an NDP frame, and thus
			there will be no MPDU data.
			TODO: Should this be extended to 2-bit e-num?
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NDP_FRAME_OFFSET                         0x0000000000000020
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NDP_FRAME_LSB                            41
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NDP_FRAME_MSB                            41
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NDP_FRAME_MASK                           0x0000020000000000


/* Description		PHY_ERR

			When set, a PHY error was received before MAC received any
			 data, and thus there will be no MPDU data.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PHY_ERR_OFFSET                           0x0000000000000020
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PHY_ERR_LSB                              42
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PHY_ERR_MSB                              42
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PHY_ERR_MASK                             0x0000040000000000


/* Description		PHY_ERR_DURING_MPDU_HEADER

			When set, a PHY error was received before MAC received the
			 complete MPDU header which was needed for proper decoding

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PHY_ERR_DURING_MPDU_HEADER_OFFSET        0x0000000000000020
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PHY_ERR_DURING_MPDU_HEADER_LSB           43
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PHY_ERR_DURING_MPDU_HEADER_MSB           43
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PHY_ERR_DURING_MPDU_HEADER_MASK          0x0000080000000000


/* Description		PROTOCOL_VERSION_ERR

			Set when RXPCU detected a version error in the Frame control
			 field
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PROTOCOL_VERSION_ERR_OFFSET              0x0000000000000020
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PROTOCOL_VERSION_ERR_LSB                 44
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PROTOCOL_VERSION_ERR_MSB                 44
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PROTOCOL_VERSION_ERR_MASK                0x0000100000000000


/* Description		AST_BASED_LOOKUP_VALID

			When set, AST based lookup for this frame has found a valid
			 result.

			Note that for NDP frame this will never be set
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_BASED_LOOKUP_VALID_OFFSET            0x0000000000000020
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_BASED_LOOKUP_VALID_LSB               45
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_BASED_LOOKUP_VALID_MSB               45
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_BASED_LOOKUP_VALID_MASK              0x0000200000000000


/* Description		RANGING

			When set, a ranging NDPA or a ranging NDP was received.

			This field is only for FW visibility. HW is not expected
			 to take any action on this.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RANGING_OFFSET                           0x0000000000000020
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RANGING_LSB                              46
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RANGING_MSB                              46
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RANGING_MASK                             0x0000400000000000


/* Description		RESERVED_9A

			<legal 0>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_9A_OFFSET                       0x0000000000000020
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_9A_LSB                          47
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_9A_MSB                          47
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_9A_MASK                         0x0000800000000000


/* Description		PHY_PPDU_ID

			A ppdu counter value that PHY increments for every PPDU
			received. The counter value wraps around
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PHY_PPDU_ID_OFFSET                       0x0000000000000020
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PHY_PPDU_ID_LSB                          48
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PHY_PPDU_ID_MSB                          63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PHY_PPDU_ID_MASK                         0xffff000000000000


/* Description		AST_INDEX

			This field indicates the index of the AST entry corresponding
			 to this MPDU. It is provided by the GSE module instantiated
			 in RXPCU.
			A value of 0xFFFF indicates an invalid AST index, meaning
			 that No AST entry was found or NO AST search was performed


			In case of ndp or phy_err, this field will be set to 0xFFFF

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_INDEX_OFFSET                         0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_INDEX_LSB                            0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_INDEX_MSB                            15
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_INDEX_MASK                           0x000000000000ffff


/* Description		SW_PEER_ID

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			This field indicates a unique peer identifier. It is set
			 equal to field 'sw_peer_id' from the AST entry

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SW_PEER_ID_OFFSET                        0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SW_PEER_ID_LSB                           16
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SW_PEER_ID_MSB                           31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SW_PEER_ID_MASK                          0x00000000ffff0000


/* Description		MPDU_FRAME_CONTROL_VALID

			When set, the field Mpdu_Frame_control_field has valid information


			In case of ndp or phy_err, this field will never be set.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_VALID_OFFSET          0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_VALID_LSB             32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_VALID_MSB             32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_VALID_MASK            0x0000000100000000


/* Description		MPDU_DURATION_VALID

			When set, the field Mpdu_duration_field has valid information


			In case of ndp or phy_err, this field will never be set.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_DURATION_VALID_OFFSET               0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_DURATION_VALID_LSB                  33
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_DURATION_VALID_MSB                  33
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_DURATION_VALID_MASK                 0x0000000200000000


/* Description		MAC_ADDR_AD1_VALID

			When set, the fields mac_addr_ad1_..... have valid information


			In case of ndp or phy_err, this field will never be set.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_VALID_OFFSET                0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_VALID_LSB                   34
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_VALID_MSB                   34
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_VALID_MASK                  0x0000000400000000


/* Description		MAC_ADDR_AD2_VALID

			When set, the fields mac_addr_ad2_..... have valid information


			For MPDUs without Address 2, this field will not be set.


			In case of ndp or phy_err, this field will never be set.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_VALID_OFFSET                0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_VALID_LSB                   35
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_VALID_MSB                   35
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_VALID_MASK                  0x0000000800000000


/* Description		MAC_ADDR_AD3_VALID

			When set, the fields mac_addr_ad3_..... have valid information


			For MPDUs without Address 3, this field will not be set.


			In case of ndp or phy_err, this field will never be set.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_VALID_OFFSET                0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_VALID_LSB                   36
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_VALID_MSB                   36
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_VALID_MASK                  0x0000001000000000


/* Description		MAC_ADDR_AD4_VALID

			When set, the fields mac_addr_ad4_..... have valid information


			For MPDUs without Address 4, this field will not be set.


			In case of ndp or phy_err, this field will never be set.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_VALID_OFFSET                0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_VALID_LSB                   37
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_VALID_MSB                   37
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_VALID_MASK                  0x0000002000000000


/* Description		MPDU_SEQUENCE_CONTROL_VALID

			When set, the fields mpdu_sequence_control_field and mpdu_sequence_number
			 have valid information as well as field

			For MPDUs without a sequence control field, this field will
			 not be set.

			In case of ndp or phy_err, this field will never be set.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_VALID_OFFSET       0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_VALID_LSB          38
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_VALID_MSB          38
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_VALID_MASK         0x0000004000000000


/* Description		MPDU_QOS_CONTROL_VALID

			When set, the field mpdu_qos_control_field has valid information


			For MPDUs without a QoS control field, this field will not
			 be set.

			In case of ndp or phy_err, this field will never be set.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_VALID_OFFSET            0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_VALID_LSB               39
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_VALID_MSB               39
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_VALID_MASK              0x0000008000000000


/* Description		MPDU_HT_CONTROL_VALID

			When set, the field mpdu_HT_control_field has valid information


			For MPDUs without a HT control field, this field will not
			 be set.

			In case of ndp or phy_err, this field will never be set.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_VALID_OFFSET             0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_VALID_LSB                40
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_VALID_MSB                40
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_VALID_MASK               0x0000010000000000


/* Description		FRAME_ENCRYPTION_INFO_VALID

			When set, the encryption related info fields, like IV and
			 PN are valid

			For MPDUs that are not encrypted, this will not be set.

			In case of ndp or phy_err, this field will never be set.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FRAME_ENCRYPTION_INFO_VALID_OFFSET       0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FRAME_ENCRYPTION_INFO_VALID_LSB          41
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FRAME_ENCRYPTION_INFO_VALID_MSB          41
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FRAME_ENCRYPTION_INFO_VALID_MASK         0x0000020000000000


/* Description		MPDU_FRAGMENT_NUMBER

			Field only valid when Mpdu_sequence_control_valid is set
			 AND Fragment_flag is set

			The fragment number from the 802.11 header

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_FRAGMENT_NUMBER_OFFSET              0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_FRAGMENT_NUMBER_LSB                 42
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_FRAGMENT_NUMBER_MSB                 45
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_FRAGMENT_NUMBER_MASK                0x00003c0000000000


/* Description		MORE_FRAGMENT_FLAG

			The More Fragment bit setting from the MPDU header of the
			 received frame

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MORE_FRAGMENT_FLAG_OFFSET                0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MORE_FRAGMENT_FLAG_LSB                   46
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MORE_FRAGMENT_FLAG_MSB                   46
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MORE_FRAGMENT_FLAG_MASK                  0x0000400000000000


/* Description		RESERVED_11A

			<legal 0>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_11A_OFFSET                      0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_11A_LSB                         47
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_11A_MSB                         47
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_11A_MASK                        0x0000800000000000


/* Description		FR_DS

			Field only valid when Mpdu_frame_control_valid is set

			Set if the from DS bit is set in the frame control.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FR_DS_OFFSET                             0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FR_DS_LSB                                48
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FR_DS_MSB                                48
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FR_DS_MASK                               0x0001000000000000


/* Description		TO_DS

			Field only valid when Mpdu_frame_control_valid is set

			Set if the to DS bit is set in the frame control.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_TO_DS_OFFSET                             0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_TO_DS_LSB                                49
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_TO_DS_MSB                                49
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_TO_DS_MASK                               0x0002000000000000


/* Description		ENCRYPTED

			Field only valid when Mpdu_frame_control_valid is set.

			Protected bit from the frame control.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ENCRYPTED_OFFSET                         0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ENCRYPTED_LSB                            50
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ENCRYPTED_MSB                            50
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ENCRYPTED_MASK                           0x0004000000000000


/* Description		MPDU_RETRY

			Field only valid when Mpdu_frame_control_valid is set.

			Retry bit from the frame control.  Only valid when first_msdu
			 is set.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_RETRY_OFFSET                        0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_RETRY_LSB                           51
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_RETRY_MSB                           51
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_RETRY_MASK                          0x0008000000000000


/* Description		MPDU_SEQUENCE_NUMBER

			Field only valid when Mpdu_sequence_control_valid is set.


			The sequence number from the 802.11 header.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_NUMBER_OFFSET              0x0000000000000028
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_NUMBER_LSB                 52
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_NUMBER_MSB                 63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_NUMBER_MASK                0xfff0000000000000


/* Description		KEY_ID_OCTET

			Field only valid when Frame_encryption_info_valid is set


			The key ID octet from the IV.

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_KEY_ID_OCTET_OFFSET                      0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_KEY_ID_OCTET_LSB                         0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_KEY_ID_OCTET_MSB                         7
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_KEY_ID_OCTET_MASK                        0x00000000000000ff


/* Description		NEW_PEER_ENTRY

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			Set if new RX_PEER_ENTRY TLV follows. If clear, RX_PEER_ENTRY
			 doesn't follow so RX DECRYPTION module either uses old
			peer entry or not decrypt.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NEW_PEER_ENTRY_OFFSET                    0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NEW_PEER_ENTRY_LSB                       8
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NEW_PEER_ENTRY_MSB                       8
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NEW_PEER_ENTRY_MASK                      0x0000000000000100


/* Description		DECRYPT_NEEDED

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			Set if decryption is needed.

			Note:
			When RXPCU sets bit 'ast_index_not_found' and/or ast_index_timeout',
			RXPCU will also ensure that this bit is NOT set
			CRYPTO for that reason only needs to evaluate this bit and
			 non of the other ones.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_DECRYPT_NEEDED_OFFSET                    0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_DECRYPT_NEEDED_LSB                       9
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_DECRYPT_NEEDED_MSB                       9
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_DECRYPT_NEEDED_MASK                      0x0000000000000200


/* Description		DECAP_TYPE

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			Used by the OLE during decapsulation.

			Indicates the decapsulation that HW will perform:

			<enum 0 RAW> No encapsulation
			<enum 1 Native_WiFi>
			<enum 2 Ethernet> Ethernet 2 (DIX)  or 802.3 (uses SNAP/LLC)

			<enum 3 802_3> Indicate Ethernet

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_DECAP_TYPE_OFFSET                        0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_DECAP_TYPE_LSB                           10
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_DECAP_TYPE_MSB                           11
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_DECAP_TYPE_MASK                          0x0000000000000c00


/* Description		RX_INSERT_VLAN_C_TAG_PADDING

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			Insert 4 byte of all zeros as VLAN tag if the rx payload
			 does not have VLAN. Used during decapsulation.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_C_TAG_PADDING_OFFSET      0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_C_TAG_PADDING_LSB         12
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_C_TAG_PADDING_MSB         12
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_C_TAG_PADDING_MASK        0x0000000000001000


/* Description		RX_INSERT_VLAN_S_TAG_PADDING

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			Insert 4 byte of all zeros as double VLAN tag if the rx
			payload does not have VLAN. Used during
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_S_TAG_PADDING_OFFSET      0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_S_TAG_PADDING_LSB         13
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_S_TAG_PADDING_MSB         13
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RX_INSERT_VLAN_S_TAG_PADDING_MASK        0x0000000000002000


/* Description		STRIP_VLAN_C_TAG_DECAP

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			Strip the VLAN during decapsulation.  Used by the OLE.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_STRIP_VLAN_C_TAG_DECAP_OFFSET            0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_STRIP_VLAN_C_TAG_DECAP_LSB               14
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_STRIP_VLAN_C_TAG_DECAP_MSB               14
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_STRIP_VLAN_C_TAG_DECAP_MASK              0x0000000000004000


/* Description		STRIP_VLAN_S_TAG_DECAP

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			Strip the double VLAN during decapsulation.  Used by the
			 OLE.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_STRIP_VLAN_S_TAG_DECAP_OFFSET            0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_STRIP_VLAN_S_TAG_DECAP_LSB               15
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_STRIP_VLAN_S_TAG_DECAP_MSB               15
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_STRIP_VLAN_S_TAG_DECAP_MASK              0x0000000000008000


/* Description		PRE_DELIM_COUNT

			The number of delimiters before this MPDU.

			Note that this number is cleared at PPDU start.

			If this MPDU is the first received MPDU in the PPDU and
			this MPDU gets filtered-in, this field will indicate the
			 number of delimiters located after the last MPDU in the
			 previous PPDU.

			If this MPDU is located after the first received MPDU in
			 an PPDU, this field will indicate the number of delimiters
			 located between the previous MPDU and this MPDU.

			In case of ndp or phy_err, this field will indicate the
			number of delimiters located after the last MPDU in the
			previous PPDU.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PRE_DELIM_COUNT_OFFSET                   0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PRE_DELIM_COUNT_LSB                      16
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PRE_DELIM_COUNT_MSB                      27
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PRE_DELIM_COUNT_MASK                     0x000000000fff0000


/* Description		AMPDU_FLAG

			When set, received frame was part of an A-MPDU.

			In case of ndp or phy_err, this field will never be set.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AMPDU_FLAG_OFFSET                        0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AMPDU_FLAG_LSB                           28
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AMPDU_FLAG_MSB                           28
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AMPDU_FLAG_MASK                          0x0000000010000000


/* Description		BAR_FRAME

			In case of ndp or phy_err or AST_based_lookup_valid == 0,
			this field will be set to 0

			When set, received frame is a BAR frame
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_BAR_FRAME_OFFSET                         0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_BAR_FRAME_LSB                            29
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_BAR_FRAME_MSB                            29
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_BAR_FRAME_MASK                           0x0000000020000000


/* Description		RAW_MPDU

			Consumer: SW
			Producer: RXOLE

			RXPCU sets this field to 0 and RXOLE overwrites it.

			Set to 1 by RXOLE when it has not performed any 802.11 to
			 Ethernet/Natvie WiFi header conversion on this MPDU.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RAW_MPDU_OFFSET                          0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RAW_MPDU_LSB                             30
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RAW_MPDU_MSB                             30
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RAW_MPDU_MASK                            0x0000000040000000


/* Description		RESERVED_12

			<legal 0>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_12_OFFSET                       0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_12_LSB                          31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_12_MSB                          31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_12_MASK                         0x0000000080000000


/* Description		MPDU_LENGTH

			In case of ndp or phy_err this field will be set to 0

			MPDU length before decapsulation.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_LENGTH_OFFSET                       0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_LENGTH_LSB                          32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_LENGTH_MSB                          45
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_LENGTH_MASK                         0x00003fff00000000


/* Description		FIRST_MPDU

			See definition in RX attention descriptor

			In case of ndp or phy_err, this field will be set. Note
			however that there will not actually be any data contents
			 in the MPDU.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FIRST_MPDU_OFFSET                        0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FIRST_MPDU_LSB                           46
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FIRST_MPDU_MSB                           46
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FIRST_MPDU_MASK                          0x0000400000000000


/* Description		MCAST_BCAST

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0

			See definition in RX attention descriptor
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MCAST_BCAST_OFFSET                       0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MCAST_BCAST_LSB                          47
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MCAST_BCAST_MSB                          47
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MCAST_BCAST_MASK                         0x0000800000000000


/* Description		AST_INDEX_NOT_FOUND

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0

			See definition in RX attention descriptor
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_INDEX_NOT_FOUND_OFFSET               0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_INDEX_NOT_FOUND_LSB                  48
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_INDEX_NOT_FOUND_MSB                  48
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_INDEX_NOT_FOUND_MASK                 0x0001000000000000


/* Description		AST_INDEX_TIMEOUT

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0

			See definition in RX attention descriptor
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_INDEX_TIMEOUT_OFFSET                 0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_INDEX_TIMEOUT_LSB                    49
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_INDEX_TIMEOUT_MSB                    49
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AST_INDEX_TIMEOUT_MASK                   0x0002000000000000


/* Description		POWER_MGMT

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0

			See definition in RX attention descriptor
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_POWER_MGMT_OFFSET                        0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_POWER_MGMT_LSB                           50
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_POWER_MGMT_MSB                           50
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_POWER_MGMT_MASK                          0x0004000000000000


/* Description		NON_QOS

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 1

			See definition in RX attention descriptor
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NON_QOS_OFFSET                           0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NON_QOS_LSB                              51
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NON_QOS_MSB                              51
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NON_QOS_MASK                             0x0008000000000000


/* Description		NULL_DATA

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0

			See definition in RX attention descriptor
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NULL_DATA_OFFSET                         0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NULL_DATA_LSB                            52
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NULL_DATA_MSB                            52
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_NULL_DATA_MASK                           0x0010000000000000


/* Description		MGMT_TYPE

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0

			See definition in RX attention descriptor
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MGMT_TYPE_OFFSET                         0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MGMT_TYPE_LSB                            53
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MGMT_TYPE_MSB                            53
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MGMT_TYPE_MASK                           0x0020000000000000


/* Description		CTRL_TYPE

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0

			See definition in RX attention descriptor
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_CTRL_TYPE_OFFSET                         0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_CTRL_TYPE_LSB                            54
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_CTRL_TYPE_MSB                            54
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_CTRL_TYPE_MASK                           0x0040000000000000


/* Description		MORE_DATA

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0

			See definition in RX attention descriptor
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MORE_DATA_OFFSET                         0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MORE_DATA_LSB                            55
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MORE_DATA_MSB                            55
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MORE_DATA_MASK                           0x0080000000000000


/* Description		EOSP

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0

			See definition in RX attention descriptor
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_EOSP_OFFSET                              0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_EOSP_LSB                                 56
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_EOSP_MSB                                 56
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_EOSP_MASK                                0x0100000000000000


/* Description		FRAGMENT_FLAG

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0

			See definition in RX attention descriptor
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FRAGMENT_FLAG_OFFSET                     0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FRAGMENT_FLAG_LSB                        57
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FRAGMENT_FLAG_MSB                        57
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_FRAGMENT_FLAG_MASK                       0x0200000000000000


/* Description		ORDER

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0

			See definition in RX attention descriptor

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ORDER_OFFSET                             0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ORDER_LSB                                58
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ORDER_MSB                                58
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ORDER_MASK                               0x0400000000000000


/* Description		U_APSD_TRIGGER

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0

			See definition in RX attention descriptor
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_U_APSD_TRIGGER_OFFSET                    0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_U_APSD_TRIGGER_LSB                       59
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_U_APSD_TRIGGER_MSB                       59
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_U_APSD_TRIGGER_MASK                      0x0800000000000000


/* Description		ENCRYPT_REQUIRED

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0

			See definition in RX attention descriptor
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ENCRYPT_REQUIRED_OFFSET                  0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ENCRYPT_REQUIRED_LSB                     60
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ENCRYPT_REQUIRED_MSB                     60
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_ENCRYPT_REQUIRED_MASK                    0x1000000000000000


/* Description		DIRECTED

			In case of ndp or phy_err or Phy_err_during_mpdu_header
			this field will be set to 0

			See definition in RX attention descriptor
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_DIRECTED_OFFSET                          0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_DIRECTED_LSB                             61
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_DIRECTED_MSB                             61
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_DIRECTED_MASK                            0x2000000000000000


/* Description		AMSDU_PRESENT

			Field only valid when Mpdu_qos_control_valid is set

			The 'amsdu_present' bit within the QoS control field of
			the MPDU
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AMSDU_PRESENT_OFFSET                     0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AMSDU_PRESENT_LSB                        62
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AMSDU_PRESENT_MSB                        62
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AMSDU_PRESENT_MASK                       0x4000000000000000


/* Description		RESERVED_13

			Field only valid when Mpdu_qos_control_valid is set

			This indicates whether the 'Ack policy' field within the
			 QoS control field of the MPDU indicates 'no-Ack.'
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_13_OFFSET                       0x0000000000000030
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_13_LSB                          63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_13_MSB                          63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_13_MASK                         0x8000000000000000


/* Description		MPDU_FRAME_CONTROL_FIELD

			Field only valid when Mpdu_frame_control_valid is set

			The frame control field of this received MPDU.

			Field only valid when Ndp_frame and phy_err are NOT set

			Bytes 0 + 1 of the received MPDU
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_FIELD_OFFSET          0x0000000000000038
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_FIELD_LSB             0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_FIELD_MSB             15
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_FRAME_CONTROL_FIELD_MASK            0x000000000000ffff


/* Description		MPDU_DURATION_FIELD

			Field only valid when Mpdu_duration_valid is set

			The duration field of this received MPDU.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_DURATION_FIELD_OFFSET               0x0000000000000038
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_DURATION_FIELD_LSB                  16
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_DURATION_FIELD_MSB                  31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_DURATION_FIELD_MASK                 0x00000000ffff0000


/* Description		MAC_ADDR_AD1_31_0

			Field only valid when mac_addr_ad1_valid is set

			The Least Significant 4 bytes of the Received Frames MAC
			 Address AD1
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_31_0_OFFSET                 0x0000000000000038
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_31_0_LSB                    32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_31_0_MSB                    63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_31_0_MASK                   0xffffffff00000000


/* Description		MAC_ADDR_AD1_47_32

			Field only valid when mac_addr_ad1_valid is set

			The 2 most significant bytes of the Received Frames MAC
			Address AD1
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_47_32_OFFSET                0x0000000000000040
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_47_32_LSB                   0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_47_32_MSB                   15
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD1_47_32_MASK                  0x000000000000ffff


/* Description		MAC_ADDR_AD2_15_0

			Field only valid when mac_addr_ad2_valid is set

			The Least Significant 2 bytes of the Received Frames MAC
			 Address AD2
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_15_0_OFFSET                 0x0000000000000040
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_15_0_LSB                    16
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_15_0_MSB                    31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_15_0_MASK                   0x00000000ffff0000


/* Description		MAC_ADDR_AD2_47_16

			Field only valid when mac_addr_ad2_valid is set

			The 4 most significant bytes of the Received Frames MAC
			Address AD2
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_47_16_OFFSET                0x0000000000000040
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_47_16_LSB                   32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_47_16_MSB                   63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD2_47_16_MASK                  0xffffffff00000000


/* Description		MAC_ADDR_AD3_31_0

			Field only valid when mac_addr_ad3_valid is set

			The Least Significant 4 bytes of the Received Frames MAC
			 Address AD3
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_31_0_OFFSET                 0x0000000000000048
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_31_0_LSB                    0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_31_0_MSB                    31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_31_0_MASK                   0x00000000ffffffff


/* Description		MAC_ADDR_AD3_47_32

			Field only valid when mac_addr_ad3_valid is set

			The 2 most significant bytes of the Received Frames MAC
			Address AD3
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_47_32_OFFSET                0x0000000000000048
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_47_32_LSB                   32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_47_32_MSB                   47
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD3_47_32_MASK                  0x0000ffff00000000


/* Description		MPDU_SEQUENCE_CONTROL_FIELD

			Field only valid when mpdu_sequence_control_valid is set


			The sequence control field of the MPDU
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_FIELD_OFFSET       0x0000000000000048
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_FIELD_LSB          48
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_FIELD_MSB          63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_SEQUENCE_CONTROL_FIELD_MASK         0xffff000000000000


/* Description		MAC_ADDR_AD4_31_0

			Field only valid when mac_addr_ad4_valid is set

			The Least Significant 4 bytes of the Received Frames MAC
			 Address AD4
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_31_0_OFFSET                 0x0000000000000050
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_31_0_LSB                    0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_31_0_MSB                    31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_31_0_MASK                   0x00000000ffffffff


/* Description		MAC_ADDR_AD4_47_32

			Field only valid when mac_addr_ad4_valid is set

			The 2 most significant bytes of the Received Frames MAC
			Address AD4
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_47_32_OFFSET                0x0000000000000050
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_47_32_LSB                   32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_47_32_MSB                   47
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MAC_ADDR_AD4_47_32_MASK                  0x0000ffff00000000


/* Description		MPDU_QOS_CONTROL_FIELD

			Field only valid when mpdu_qos_control_valid is set

			The sequence control field of the MPDU
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_FIELD_OFFSET            0x0000000000000050
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_FIELD_LSB               48
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_FIELD_MSB               63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_QOS_CONTROL_FIELD_MASK              0xffff000000000000


/* Description		MPDU_HT_CONTROL_FIELD

			Field only valid when mpdu_qos_control_valid is set

			The HT control field of the MPDU
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_FIELD_OFFSET             0x0000000000000058
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_FIELD_LSB                0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_FIELD_MSB                31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MPDU_HT_CONTROL_FIELD_MASK               0x00000000ffffffff


/* Description		VDEV_ID

			Consumer: RXOLE
			Producer: FW

			Virtual device associated with this peer

			RXOLE uses this to determine intra-BSS routing.

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_VDEV_ID_OFFSET                           0x0000000000000058
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_VDEV_ID_LSB                              32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_VDEV_ID_MSB                              39
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_VDEV_ID_MASK                             0x000000ff00000000


/* Description		SERVICE_CODE

			Opaque service code between PPE and Wi-Fi

			This field gets passed on by REO to PPE in the EDMA descriptor
			 ('REO_TO_PPE_RING').

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SERVICE_CODE_OFFSET                      0x0000000000000058
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SERVICE_CODE_LSB                         40
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SERVICE_CODE_MSB                         48
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SERVICE_CODE_MASK                        0x0001ff0000000000


/* Description		PRIORITY_VALID

			This field gets passed on by REO to PPE in the EDMA descriptor
			 ('REO_TO_PPE_RING').

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PRIORITY_VALID_OFFSET                    0x0000000000000058
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PRIORITY_VALID_LSB                       49
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PRIORITY_VALID_MSB                       49
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_PRIORITY_VALID_MASK                      0x0002000000000000


/* Description		SRC_INFO

			Source (virtual) device/interface info. associated with
			this peer

			This field gets passed on by REO to PPE in the EDMA descriptor
			 ('REO_TO_PPE_RING').

			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SRC_INFO_OFFSET                          0x0000000000000058
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SRC_INFO_LSB                             50
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SRC_INFO_MSB                             61
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_SRC_INFO_MASK                            0x3ffc000000000000


/* Description		RESERVED_23A

			<legal 0>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_23A_OFFSET                      0x0000000000000058
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_23A_LSB                         62
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_23A_MSB                         62
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_23A_MASK                        0x4000000000000000


/* Description		MULTI_LINK_ADDR_AD1_AD2_VALID

			If set, Rx OLE shall convert Address1 and Address2 of received
			 data frames to multi-link addresses during decapsulation
			 to Ethernet or Native WiFi
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD1_AD2_VALID_OFFSET     0x0000000000000058
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD1_AD2_VALID_LSB        63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD1_AD2_VALID_MSB        63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD1_AD2_VALID_MASK       0x8000000000000000


/* Description		MULTI_LINK_ADDR_AD1_31_0

			Field only valid if Multi_link_addr_ad1_ad2_valid is set


			Multi-link receiver address (address1), bits [31:0]
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD1_31_0_OFFSET          0x0000000000000060
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD1_31_0_LSB             0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD1_31_0_MSB             31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD1_31_0_MASK            0x00000000ffffffff


/* Description		MULTI_LINK_ADDR_AD1_47_32

			Field only valid if Multi_link_addr_ad1_ad2_valid is set


			Multi-link receiver address (address1), bits [47:32]
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD1_47_32_OFFSET         0x0000000000000060
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD1_47_32_LSB            32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD1_47_32_MSB            47
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD1_47_32_MASK           0x0000ffff00000000


/* Description		MULTI_LINK_ADDR_AD2_15_0

			Field only valid if Multi_link_addr_ad1_ad2_valid is set


			Multi-link transmitter address (address2), bits [15:0]
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD2_15_0_OFFSET          0x0000000000000060
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD2_15_0_LSB             48
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD2_15_0_MSB             63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD2_15_0_MASK            0xffff000000000000


/* Description		MULTI_LINK_ADDR_AD2_47_16

			Field only valid if Multi_link_addr_ad1_ad2_valid is set


			Multi-link transmitter address (address2), bits [47:16]
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD2_47_16_OFFSET         0x0000000000000068
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD2_47_16_LSB            0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD2_47_16_MSB            31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_MULTI_LINK_ADDR_AD2_47_16_MASK           0x00000000ffffffff


/* Description		AUTHORIZED_TO_SEND_WDS

			If not set, RXDMA shall perform error-routing for WDS packets
			 as the sender is not authorized and might misuse WDS frame
			 format to inject packets with arbitrary DA/SA.
			<legal all>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AUTHORIZED_TO_SEND_WDS_OFFSET            0x0000000000000068
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AUTHORIZED_TO_SEND_WDS_LSB               32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AUTHORIZED_TO_SEND_WDS_MSB               32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_AUTHORIZED_TO_SEND_WDS_MASK              0x0000000100000000


/* Description		RESERVED_27A

			<legal 0>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_27A_OFFSET                      0x0000000000000068
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_27A_LSB                         33
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_27A_MSB                         63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_27A_MASK                        0xfffffffe00000000


/* Description		RESERVED_28A

			<legal 0>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_28A_OFFSET                      0x0000000000000070
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_28A_LSB                         0
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_28A_MSB                         31
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_28A_MASK                        0x00000000ffffffff


/* Description		RESERVED_29A

			<legal 0>
*/

#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_29A_OFFSET                      0x0000000000000070
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_29A_LSB                         32
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_29A_MSB                         63
#define RX_MPDU_START_RX_MPDU_INFO_DETAILS_RESERVED_29A_MASK                        0xffffffff00000000



#endif   // RX_MPDU_START