xref: /wlan-driver/fw-api/hw/qca8074/v2/phyrx_pkt_end.h (revision 5113495b16420b49004c444715d2daae2066e7dc)

/*
 * Copyright (c) 2020 The Linux Foundation. All rights reserved.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

// $ATH_LICENSE_HW_HDR_C$
//
// DO NOT EDIT!  This file is automatically generated
//               These definitions are tied to a particular hardware layout


#ifndef _PHYRX_PKT_END_H_
#define _PHYRX_PKT_END_H_
#if !defined(__ASSEMBLER__)
#endif

#include "phyrx_pkt_end_info.h"

// ################ START SUMMARY #################
//
//	Dword	Fields
//	0-32	struct phyrx_pkt_end_info rx_pkt_end_details;
//
// ################ END SUMMARY #################

#define NUM_OF_DWORDS_PHYRX_PKT_END 33

struct phyrx_pkt_end {
    struct            phyrx_pkt_end_info                       rx_pkt_end_details;
};

/*

struct phyrx_pkt_end_info rx_pkt_end_details

			Overview of the final receive related parameters from
			the PHY RX
*/


 /* EXTERNAL REFERENCE : struct phyrx_pkt_end_info rx_pkt_end_details */


/* Description		PHYRX_PKT_END_0_RX_PKT_END_DETAILS_PHY_INTERNAL_NAP

			When set, PHY RX entered an internal NAP state, as PHY
			determined that this reception was not destined to this
			device
*/
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_PHY_INTERNAL_NAP_OFFSET   0x00000000
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_PHY_INTERNAL_NAP_LSB      0
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_PHY_INTERNAL_NAP_MASK     0x00000001

/* Description		PHYRX_PKT_END_0_RX_PKT_END_DETAILS_LOCATION_INFO_VALID

			Indicates that the RX_LOCATION_INFO structure later on
			in the TLV contains valid info
*/
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_LOCATION_INFO_VALID_OFFSET 0x00000000
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_LOCATION_INFO_VALID_LSB   1
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_LOCATION_INFO_VALID_MASK  0x00000002

/* Description		PHYRX_PKT_END_0_RX_PKT_END_DETAILS_TIMING_INFO_VALID

			Indicates that the RX_TIMING_OFFSET_INFO structure later
			on in the TLV contains valid info
*/
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_TIMING_INFO_VALID_OFFSET  0x00000000
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_TIMING_INFO_VALID_LSB     2
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_TIMING_INFO_VALID_MASK    0x00000004

/* Description		PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RSSI_INFO_VALID

			Indicates that the RECEIVE_RSSI_INFO structure later on
			in the TLV contains valid info
*/
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RSSI_INFO_VALID_OFFSET    0x00000000
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RSSI_INFO_VALID_LSB       3
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RSSI_INFO_VALID_MASK      0x00000008

/* Description		PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RX_FRAME_CORRECTION_NEEDED

			When clear, no action is needed in the MAC.



			When set, the falling edge of the rx_frame happened 4us
			too late. MAC will need to compensate for this delay in
			order to maintain proper SIFS timing and/or not to get
			de-slotted.



			PHY uses this for very short 11a frames.



			When set, PHY will have passed this TLV to the MAC up to
			8 us into the 'real SIFS' time, and thus within 4us from the
			falling edge of the rx_frame.



			<legal all>
*/
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RX_FRAME_CORRECTION_NEEDED_OFFSET 0x00000000
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RX_FRAME_CORRECTION_NEEDED_LSB 4
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RX_FRAME_CORRECTION_NEEDED_MASK 0x00000010

/* Description		PHYRX_PKT_END_0_RX_PKT_END_DETAILS_FRAMELESS_FRAME_RECEIVED

			When set, PHY has received the 'frameless frame' . Can
			be used in the 'MU-RTS -CTS exchange where CTS reception can
			be problematic.

			<legal all>
*/
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_FRAMELESS_FRAME_RECEIVED_OFFSET 0x00000000
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_FRAMELESS_FRAME_RECEIVED_LSB 5
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_FRAMELESS_FRAME_RECEIVED_MASK 0x00000020

/* Description		PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RESERVED_0A

			<legal 0>
*/
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RESERVED_0A_OFFSET        0x00000000
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RESERVED_0A_LSB           6
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RESERVED_0A_MASK          0x00000fc0

/* Description		PHYRX_PKT_END_0_RX_PKT_END_DETAILS_DL_OFDMA_INFO_VALID

			When set, the following DL_ofdma_... fields are valid.

			It provides the MAC insight into which RU was allocated
			to this device.

			<legal all>
*/
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_DL_OFDMA_INFO_VALID_OFFSET 0x00000000
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_DL_OFDMA_INFO_VALID_LSB   12
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_DL_OFDMA_INFO_VALID_MASK  0x00001000

/* Description		PHYRX_PKT_END_0_RX_PKT_END_DETAILS_DL_OFDMA_RU_START_INDEX

			RU index number to which User is assigned

			RU numbering is over the entire BW, starting from 0 and
			in increasing frequency order and not primary-secondary
			order

			<legal 0-73>
*/
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_DL_OFDMA_RU_START_INDEX_OFFSET 0x00000000
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_DL_OFDMA_RU_START_INDEX_LSB 13
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_DL_OFDMA_RU_START_INDEX_MASK 0x000fe000

/* Description		PHYRX_PKT_END_0_RX_PKT_END_DETAILS_DL_OFDMA_RU_WIDTH

			The size of the RU for this user.

			In units of 1 (26 tone) RU

			<legal 1-74>
*/
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_DL_OFDMA_RU_WIDTH_OFFSET  0x00000000
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_DL_OFDMA_RU_WIDTH_LSB     20
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_DL_OFDMA_RU_WIDTH_MASK    0x07f00000

/* Description		PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RESERVED_0B

			<legal 0>
*/
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RESERVED_0B_OFFSET        0x00000000
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RESERVED_0B_LSB           27
#define PHYRX_PKT_END_0_RX_PKT_END_DETAILS_RESERVED_0B_MASK          0xf8000000

/* Description		PHYRX_PKT_END_1_RX_PKT_END_DETAILS_PHY_TIMESTAMP_1_LOWER_32

			TODO PHY: cleanup descriptionThe PHY timestamp in the
			AMPI of the first rising edge of rx_clear_pri after
			TX_PHY_DESC. .  This field should set to 0 by the PHY and
			should be updated by the AMPI before being forwarded to the
			rest of the MAC. This field indicates the lower 32 bits of
			the timestamp
*/
#define PHYRX_PKT_END_1_RX_PKT_END_DETAILS_PHY_TIMESTAMP_1_LOWER_32_OFFSET 0x00000004
#define PHYRX_PKT_END_1_RX_PKT_END_DETAILS_PHY_TIMESTAMP_1_LOWER_32_LSB 0
#define PHYRX_PKT_END_1_RX_PKT_END_DETAILS_PHY_TIMESTAMP_1_LOWER_32_MASK 0xffffffff

/* Description		PHYRX_PKT_END_2_RX_PKT_END_DETAILS_PHY_TIMESTAMP_1_UPPER_32

			TODO PHY: cleanup description

			The PHY timestamp in the AMPI of the first rising edge
			of rx_clear_pri after TX_PHY_DESC.  This field should set to
			0 by the PHY and should be updated by the AMPI before being
			forwarded to the rest of the MAC. This field indicates the
			upper 32 bits of the timestamp
*/
#define PHYRX_PKT_END_2_RX_PKT_END_DETAILS_PHY_TIMESTAMP_1_UPPER_32_OFFSET 0x00000008
#define PHYRX_PKT_END_2_RX_PKT_END_DETAILS_PHY_TIMESTAMP_1_UPPER_32_LSB 0
#define PHYRX_PKT_END_2_RX_PKT_END_DETAILS_PHY_TIMESTAMP_1_UPPER_32_MASK 0xffffffff

/* Description		PHYRX_PKT_END_3_RX_PKT_END_DETAILS_PHY_TIMESTAMP_2_LOWER_32

			TODO PHY: cleanup description

			The PHY timestamp in the AMPI of the rising edge of
			rx_clear_pri after RX_RSSI_LEGACY.  This field should set to
			0 by the PHY and should be updated by the AMPI before being
			forwarded to the rest of the MAC. This field indicates the
			lower 32 bits of the timestamp
*/
#define PHYRX_PKT_END_3_RX_PKT_END_DETAILS_PHY_TIMESTAMP_2_LOWER_32_OFFSET 0x0000000c
#define PHYRX_PKT_END_3_RX_PKT_END_DETAILS_PHY_TIMESTAMP_2_LOWER_32_LSB 0
#define PHYRX_PKT_END_3_RX_PKT_END_DETAILS_PHY_TIMESTAMP_2_LOWER_32_MASK 0xffffffff

/* Description		PHYRX_PKT_END_4_RX_PKT_END_DETAILS_PHY_TIMESTAMP_2_UPPER_32

			TODO PHY: cleanup description

			The PHY timestamp in the AMPI of the rising edge of
			rx_clear_pri after RX_RSSI_LEGACY.  This field should set to
			0 by the PHY and should be updated by the AMPI before being
			forwarded to the rest of the MAC. This field indicates the
			upper 32 bits of the timestamp
*/
#define PHYRX_PKT_END_4_RX_PKT_END_DETAILS_PHY_TIMESTAMP_2_UPPER_32_OFFSET 0x00000010
#define PHYRX_PKT_END_4_RX_PKT_END_DETAILS_PHY_TIMESTAMP_2_UPPER_32_LSB 0
#define PHYRX_PKT_END_4_RX_PKT_END_DETAILS_PHY_TIMESTAMP_2_UPPER_32_MASK 0xffffffff

 /* EXTERNAL REFERENCE : struct rx_location_info rx_location_info_details */


/* Description		PHYRX_PKT_END_5_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY

			For 20/40/80, this field shows the RTT first arrival
			correction value computed from L-LTF on the first selected
			Rx chain



			For 80+80, this field shows the RTT first arrival
			correction value computed from L-LTF on pri80 on the
			selected pri80 Rx chain



			16 bits, signed 12.4. 12 bits integer to cover -6.4us to
			6.4us, and 4 bits fraction to cover pri80 and 32x FAC
			interpolation



			clock unit is 320MHz

			<legal all>
*/
#define PHYRX_PKT_END_5_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_OFFSET 0x00000014
#define PHYRX_PKT_END_5_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_LSB 0
#define PHYRX_PKT_END_5_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_MASK 0x0000ffff

/* Description		PHYRX_PKT_END_5_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_EXT80

			For 20/40/80, this field shows the RTT first arrival
			correction value computed from L-LTF on the second selected
			Rx chain



			For 80+80, this field shows the RTT first arrival
			correction value computed from L-LTF on ext80 on the
			selected ext80 Rx chain



			16 bits, signed 12.4. 12 bits integer to cover -6.4us to
			6.4us, and 4 bits fraction to cover ext80 and 32x FAC
			interpolation



			clock unit is 320MHz

			<legal all>
*/
#define PHYRX_PKT_END_5_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_EXT80_OFFSET 0x00000014
#define PHYRX_PKT_END_5_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_EXT80_LSB 16
#define PHYRX_PKT_END_5_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_EXT80_MASK 0xffff0000

/* Description		PHYRX_PKT_END_6_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT

			For 20/40/80, this field shows the RTT first arrival
			correction value computed from (V)HT/HE-LTF on the first
			selected Rx chain



			For 80+80, this field shows the RTT first arrival
			correction value computed from (V)HT/HE-LTF on pri80 on the
			selected pri80 Rx chain



			16 bits, signed 12.4. 12 bits integer to cover -6.4us to
			6.4us, and 4 bits fraction to cover pri80 and 32x FAC
			interpolation



			clock unit is 320MHz

			<legal all>
*/
#define PHYRX_PKT_END_6_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_OFFSET 0x00000018
#define PHYRX_PKT_END_6_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_LSB 0
#define PHYRX_PKT_END_6_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_MASK 0x0000ffff

/* Description		PHYRX_PKT_END_6_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_EXT80

			For 20/40/80, this field shows the RTT first arrival
			correction value computed from (V)HT/HE-LTF on the second
			selected Rx chain



			For 80+80, this field shows the RTT first arrival
			correction value computed from (V)HT/HE-LTF on ext80 on the
			selected ext80 Rx chain



			16 bits, signed 12.4. 12 bits integer to cover -6.4us to
			6.4us, and 4 bits fraction to cover ext80 and 32x FAC
			interpolation



			clock unit is 320MHz

			<legal all>
*/
#define PHYRX_PKT_END_6_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_EXT80_OFFSET 0x00000018
#define PHYRX_PKT_END_6_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_EXT80_LSB 16
#define PHYRX_PKT_END_6_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_EXT80_MASK 0xffff0000

/* Description		PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_STATUS

			Status of rtt_fac_legacy



			<enum 0 location_fac_legacy_status_not_valid>

			<enum 1 location_fac_legacy_status_valid>

			<legal all>
*/
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_STATUS_OFFSET 0x0000001c
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_STATUS_LSB 0
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_STATUS_MASK 0x00000001

/* Description		PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_EXT80_STATUS

			Status of rtt_fac_legacy_ext80



			<enum 0 location_fac_legacy_ext80_status_not_valid>

			<enum 1 location_fac_legacy_ext80_status_valid>

			<legal all>
*/
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_EXT80_STATUS_OFFSET 0x0000001c
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_EXT80_STATUS_LSB 1
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_LEGACY_EXT80_STATUS_MASK 0x00000002

/* Description		PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_STATUS

			Status of rtt_fac_vht



			<enum 0 location_fac_vht_status_not_valid>

			<enum 1 location_fac_vht_status_valid>

			<legal all>
*/
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_STATUS_OFFSET 0x0000001c
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_STATUS_LSB 2
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_STATUS_MASK 0x00000004

/* Description		PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_EXT80_STATUS

			Status of rtt_fac_vht_ext80



			<enum 0 location_fac_vht_ext80_status_not_valid>

			<enum 1 location_fac_vht_ext80_status_valid>

			<legal all>
*/
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_EXT80_STATUS_OFFSET 0x0000001c
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_EXT80_STATUS_LSB 3
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_VHT_EXT80_STATUS_MASK 0x00000008

/* Description		PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_SIFS

			To support fine SIFS adjustment, need to provide FAC
			value @ integer number of 320 MHz clock cycles to MAC.  It
			is from L-LTF if it is a Legacy packet and from (V)HT/HE-LTF
			if it is a (V)HT/HE packet



			12 bits, signed, no fractional part

			<legal all>
*/
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_SIFS_OFFSET 0x0000001c
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_SIFS_LSB 4
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_SIFS_MASK 0x0000fff0

/* Description		PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_SIFS_STATUS

			Status of rtt_fac_sifs

			0: not valid

			1: valid and from L-LTF

			2: valid and from (V)HT/HE-LTF

			3: reserved

			<legal 0-2>
*/
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_SIFS_STATUS_OFFSET 0x0000001c
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_SIFS_STATUS_LSB 16
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_FAC_SIFS_STATUS_MASK 0x00030000

/* Description		PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CFR_STATUS

			Status of channel frequency response dump



			<enum 0 location_CFR_dump_not_valid>

			<enum 1 location_CFR_dump_valid>

			<legal all>
*/
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CFR_STATUS_OFFSET 0x0000001c
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CFR_STATUS_LSB 18
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CFR_STATUS_MASK 0x00040000

/* Description		PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CIR_STATUS

			Status of channel impulse response dump



			<enum 0 location_CIR_dump_not_valid>

			<enum 1 location_CIR_dump_valid>

			<legal all>
*/
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CIR_STATUS_OFFSET 0x0000001c
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CIR_STATUS_LSB 19
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CIR_STATUS_MASK 0x00080000

/* Description		PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHANNEL_DUMP_SIZE

			Channel dump size.  It shows how many tones in CFR in
			one chain, for example, it will show 52 for Legacy20 and 484
			for VHT160



			<legal all>
*/
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHANNEL_DUMP_SIZE_OFFSET 0x0000001c
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHANNEL_DUMP_SIZE_LSB 20
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHANNEL_DUMP_SIZE_MASK 0x7ff00000

/* Description		PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_HW_IFFT_MODE

			Indicator showing if HW IFFT mode or SW IFFT mode



			<enum 0 location_sw_ifft_mode>

			<enum 1 location_hw_ifft_mode>

			<legal all>
*/
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_HW_IFFT_MODE_OFFSET 0x0000001c
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_HW_IFFT_MODE_LSB 31
#define PHYRX_PKT_END_7_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_HW_IFFT_MODE_MASK 0x80000000

/* Description		PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_BTCF_STATUS

			Indicate if BTCF is used to capture the timestamps



			<enum 0 location_not_BTCF_based_ts>

			<enum 1 location_BTCF_based_ts>

			<legal all>
*/
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_BTCF_STATUS_OFFSET 0x00000020
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_BTCF_STATUS_LSB 0
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_BTCF_STATUS_MASK 0x00000001

/* Description		PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_PREAMBLE_TYPE

			Indicate preamble type



			<enum 0 location_preamble_type_legacy>

			<enum 1 location_preamble_type_ht>

			<enum 2 location_preamble_type_vht>

			<enum 3 location_preamble_type_he_su_4xltf>

			<enum 4 location_preamble_type_he_su_2xltf>

			<enum 5 location_preamble_type_he_su_1xltf>

			<enum 6
			location_preamble_type_he_trigger_based_ul_4xltf>

			<enum 7
			location_preamble_type_he_trigger_based_ul_2xltf>

			<enum 8
			location_preamble_type_he_trigger_based_ul_1xltf>

			<enum 9 location_preamble_type_he_mu_4xltf>

			<enum 10 location_preamble_type_he_mu_2xltf>

			<enum 11 location_preamble_type_he_mu_1xltf>

			<enum 12
			location_preamble_type_he_extended_range_su_4xltf>

			<enum 13
			location_preamble_type_he_extended_range_su_2xltf>

			<enum 14
			location_preamble_type_he_extended_range_su_1xltf>

			<legal 0-14>
*/
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_PREAMBLE_TYPE_OFFSET 0x00000020
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_PREAMBLE_TYPE_LSB 1
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_PREAMBLE_TYPE_MASK 0x0000003e

/* Description		PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_PKT_BW_LEG

			Indicate the bandwidth of L-LTF



			<enum 0 location_pkt_bw_20MHz>

			<enum 1 location_pkt_bw_40MHz>

			<enum 2 location_pkt_bw_80MHz>

			<enum 3 location_pkt_bw_160MHz>

			<legal all>
*/
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_PKT_BW_LEG_OFFSET 0x00000020
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_PKT_BW_LEG_LSB 6
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_PKT_BW_LEG_MASK 0x000000c0

/* Description		PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_PKT_BW_VHT

			Indicate the bandwidth of (V)HT/HE-LTF



			<enum 0 location_pkt_bw_20MHz>

			<enum 1 location_pkt_bw_40MHz>

			<enum 2 location_pkt_bw_80MHz>

			<enum 3 location_pkt_bw_160MHz>

			<legal all>
*/
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_PKT_BW_VHT_OFFSET 0x00000020
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_PKT_BW_VHT_LSB 8
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_PKT_BW_VHT_MASK 0x00000300

/* Description		PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_GI_TYPE

			Indicate GI (guard interval) type



			<enum 0     gi_0_8_us > HE related GI. Can also be used
			for HE

			<enum 1     gi_0_4_us > HE related GI. Can also be used
			for HE

			<enum 2     gi_1_6_us > HE related GI

			<enum 3     gi_3_2_us > HE related GI

			<legal 0 - 3>
*/
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_GI_TYPE_OFFSET 0x00000020
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_GI_TYPE_LSB 10
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_GI_TYPE_MASK 0x00000c00

/* Description		PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_MCS_RATE

			Bits 0~4 indicate MCS rate, if Legacy,

			0: 48 Mbps,

			1: 24 Mbps,

			2: 12 Mbps,

			3: 6 Mbps,

			4: 54 Mbps,

			5: 36 Mbps,

			6: 18 Mbps,

			7: 9 Mbps,



			if HT, 0-7: MCS0-MCS7,

			if VHT, 0-9: MCS0-MCS9,


			<legal all>
*/
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_MCS_RATE_OFFSET 0x00000020
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_MCS_RATE_LSB 12
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_MCS_RATE_MASK 0x0001f000

/* Description		PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_STRONGEST_CHAIN

			For 20/40/80, this field shows the first selected Rx
			chain that is used in HW IFFT mode



			For 80+80, this field shows the selected pri80 Rx chain
			that is used in HW IFFT mode



			<enum 0 location_strongest_chain_is_0>

			<enum 1 location_strongest_chain_is_1>

			<enum 2 location_strongest_chain_is_2>

			<enum 3 location_strongest_chain_is_3>

			<enum 4 location_strongest_chain_is_4>

			<enum 5 location_strongest_chain_is_5>

			<enum 6 location_strongest_chain_is_6>

			<enum 7 location_strongest_chain_is_7>

			<legal all>
*/
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_STRONGEST_CHAIN_OFFSET 0x00000020
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_STRONGEST_CHAIN_LSB 17
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_STRONGEST_CHAIN_MASK 0x000e0000

/* Description		PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_STRONGEST_CHAIN_EXT80

			For 20/40/80, this field shows the second selected Rx
			chain that is used in HW IFFT mode



			For 80+80, this field shows the selected ext80 Rx chain
			that is used in HW IFFT mode



			<enum 0 location_strongest_chain_is_0>

			<enum 1 location_strongest_chain_is_1>

			<enum 2 location_strongest_chain_is_2>

			<enum 3 location_strongest_chain_is_3>

			<enum 4 location_strongest_chain_is_4>

			<enum 5 location_strongest_chain_is_5>

			<enum 6 location_strongest_chain_is_6>

			<enum 7 location_strongest_chain_is_7>

			<legal all>
*/
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_STRONGEST_CHAIN_EXT80_OFFSET 0x00000020
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_STRONGEST_CHAIN_EXT80_LSB 20
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_STRONGEST_CHAIN_EXT80_MASK 0x00700000

/* Description		PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_RX_CHAIN_MASK

			Rx chain mask, each bit is a Rx chain

			0: the Rx chain is not used

			1: the Rx chain is used

			Support up to 8 Rx chains

			<legal all>
*/
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_RX_CHAIN_MASK_OFFSET 0x00000020
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_RX_CHAIN_MASK_LSB 23
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_RX_CHAIN_MASK_MASK 0x7f800000

/* Description		PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RESERVED_3

			<legal 0>
*/
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RESERVED_3_OFFSET 0x00000020
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RESERVED_3_LSB 31
#define PHYRX_PKT_END_8_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RESERVED_3_MASK 0x80000000

/* Description		PHYRX_PKT_END_9_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RX_START_TS

			RX packet start timestamp



			It reports the time the first L-STF ADC sample arrived
			at RX antenna



			clock unit is 480MHz

			<legal all>
*/
#define PHYRX_PKT_END_9_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RX_START_TS_OFFSET 0x00000024
#define PHYRX_PKT_END_9_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RX_START_TS_LSB 0
#define PHYRX_PKT_END_9_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RX_START_TS_MASK 0xffffffff

/* Description		PHYRX_PKT_END_10_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RX_END_TS

			RX packet end timestamp



			It reports the time the last symbol's last ADC sample
			arrived at RX antenna



			clock unit is 480MHz

			<legal all>
*/
#define PHYRX_PKT_END_10_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RX_END_TS_OFFSET 0x00000028
#define PHYRX_PKT_END_10_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RX_END_TS_LSB 0
#define PHYRX_PKT_END_10_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RX_END_TS_MASK 0xffffffff

/* Description		PHYRX_PKT_END_11_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_SFO_PHASE_PKT_START

			The phase of the SFO of the first symbol's first FFT
			input sample



			12 bits, signed 6.6. 6 bits integer to cover -66.7ns to
			66.7ns, and 6 bits fraction to provide a resolution of
			0.03ns



			clock unit is 480MHz

			<legal all>
*/
#define PHYRX_PKT_END_11_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_SFO_PHASE_PKT_START_OFFSET 0x0000002c
#define PHYRX_PKT_END_11_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_SFO_PHASE_PKT_START_LSB 0
#define PHYRX_PKT_END_11_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_SFO_PHASE_PKT_START_MASK 0x00000fff

/* Description		PHYRX_PKT_END_11_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_SFO_PHASE_PKT_END

			The phase of the SFO of the last symbol's last FFT input
			sample



			12 bits, signed 6.6. 6 bits integer to cover -66.7ns to
			66.7ns, and 6 bits fraction to provide a resolution of
			0.03ns



			clock unit is 480MHz

			<legal all>
*/
#define PHYRX_PKT_END_11_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_SFO_PHASE_PKT_END_OFFSET 0x0000002c
#define PHYRX_PKT_END_11_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_SFO_PHASE_PKT_END_LSB 12
#define PHYRX_PKT_END_11_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_SFO_PHASE_PKT_END_MASK 0x00fff000

/* Description		PHYRX_PKT_END_11_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHE_BUFFER_POINTER_HIGH8

			The high 8 bits of the 40 bits pointer pointed to the
			external RTT channel information buffer



			8 bits

			<legal all>
*/
#define PHYRX_PKT_END_11_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHE_BUFFER_POINTER_HIGH8_OFFSET 0x0000002c
#define PHYRX_PKT_END_11_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHE_BUFFER_POINTER_HIGH8_LSB 24
#define PHYRX_PKT_END_11_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHE_BUFFER_POINTER_HIGH8_MASK 0xff000000

/* Description		PHYRX_PKT_END_12_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHE_BUFFER_POINTER_LOW32

			The low 32 bits of the 40 bits pointer pointed to the
			external RTT channel information buffer



			32 bits

			<legal all>
*/
#define PHYRX_PKT_END_12_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHE_BUFFER_POINTER_LOW32_OFFSET 0x00000030
#define PHYRX_PKT_END_12_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHE_BUFFER_POINTER_LOW32_LSB 0
#define PHYRX_PKT_END_12_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHE_BUFFER_POINTER_LOW32_MASK 0xffffffff

/* Description		PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CFO_MEASUREMENT

			CFO measurement. Needed for passive locationing



			14 bits, signed 1.13. 13 bits fraction to provide a
			resolution of 153 Hz



			In units of cycles/800 ns

			<legal all>
*/
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CFO_MEASUREMENT_OFFSET 0x00000034
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CFO_MEASUREMENT_LSB 0
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CFO_MEASUREMENT_MASK 0x00003fff

/* Description		PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHAN_SPREAD

			Channel delay spread measurement. Needed for selecting
			GI length



			8 bits, unsigned. At 25 ns step. Can represent up to
			6375 ns



			In units of cycles @ 40 MHz

			<legal all>
*/
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHAN_SPREAD_OFFSET 0x00000034
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHAN_SPREAD_LSB 14
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_CHAN_SPREAD_MASK 0x003fc000

/* Description		PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_TIMING_BACKOFF_SEL

			Indicate which timing backoff value is used



			<enum 0 timing_backoff_low_rssi>

			<enum 1 timing_backoff_mid_rssi>

			<enum 2 timing_backoff_high_rssi>

			<enum 3 reserved>

			<legal all>
*/
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_TIMING_BACKOFF_SEL_OFFSET 0x00000034
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_TIMING_BACKOFF_SEL_LSB 22
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RTT_TIMING_BACKOFF_SEL_MASK 0x00c00000

/* Description		PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RESERVED_8

			<legal 0>
*/
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RESERVED_8_OFFSET 0x00000034
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RESERVED_8_LSB 24
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RESERVED_8_MASK 0x7f000000

/* Description		PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RX_LOCATION_INFO_VALID

			<enum 0 rx_location_info_is_not_valid>

			<enum 1 rx_location_info_is_valid>

			<legal all>
*/
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RX_LOCATION_INFO_VALID_OFFSET 0x00000034
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RX_LOCATION_INFO_VALID_LSB 31
#define PHYRX_PKT_END_13_RX_PKT_END_DETAILS_RX_LOCATION_INFO_DETAILS_RX_LOCATION_INFO_VALID_MASK 0x80000000

 /* EXTERNAL REFERENCE : struct rx_timing_offset_info rx_timing_offset_info_details */


/* Description		PHYRX_PKT_END_14_RX_PKT_END_DETAILS_RX_TIMING_OFFSET_INFO_DETAILS_RESIDUAL_PHASE_OFFSET

			Cumulative reference frequency error at end of RX

			<legal all>
*/
#define PHYRX_PKT_END_14_RX_PKT_END_DETAILS_RX_TIMING_OFFSET_INFO_DETAILS_RESIDUAL_PHASE_OFFSET_OFFSET 0x00000038
#define PHYRX_PKT_END_14_RX_PKT_END_DETAILS_RX_TIMING_OFFSET_INFO_DETAILS_RESIDUAL_PHASE_OFFSET_LSB 0
#define PHYRX_PKT_END_14_RX_PKT_END_DETAILS_RX_TIMING_OFFSET_INFO_DETAILS_RESIDUAL_PHASE_OFFSET_MASK 0x00000fff

/* Description		PHYRX_PKT_END_14_RX_PKT_END_DETAILS_RX_TIMING_OFFSET_INFO_DETAILS_RESERVED

			<legal 0>
*/
#define PHYRX_PKT_END_14_RX_PKT_END_DETAILS_RX_TIMING_OFFSET_INFO_DETAILS_RESERVED_OFFSET 0x00000038
#define PHYRX_PKT_END_14_RX_PKT_END_DETAILS_RX_TIMING_OFFSET_INFO_DETAILS_RESERVED_LSB 12
#define PHYRX_PKT_END_14_RX_PKT_END_DETAILS_RX_TIMING_OFFSET_INFO_DETAILS_RESERVED_MASK 0xfffff000

 /* EXTERNAL REFERENCE : struct receive_rssi_info post_rssi_info_details */


/* Description		PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN0

			RSSI of RX PPDU on chain 0 of primary 20 MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN0_OFFSET 0x0000003c
#define PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN0_LSB 0
#define PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN0_MASK 0x000000ff

/* Description		PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN0

			RSSI of RX PPDU on chain 0 of extension 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN0_OFFSET 0x0000003c
#define PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN0_LSB 8
#define PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN0_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN0

			RSSI of RX PPDU on chain 0 of extension 40, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN0_OFFSET 0x0000003c
#define PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN0_LSB 16
#define PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN0_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN0

			RSSI of RX PPDU on chain 0 of extension 40, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN0_OFFSET 0x0000003c
#define PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN0_LSB 24
#define PHYRX_PKT_END_15_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN0_MASK 0xff000000

/* Description		PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN0

			RSSI of RX PPDU on chain 0 of extension 80, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN0_OFFSET 0x00000040
#define PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN0_LSB 0
#define PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN0_MASK 0x000000ff

/* Description		PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN0

			RSSI of RX PPDU on chain 0 of extension 80, low-high 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN0_OFFSET 0x00000040
#define PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN0_LSB 8
#define PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN0_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN0

			RSSI of RX PPDU on chain 0 of extension 80, high-low 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN0_OFFSET 0x00000040
#define PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN0_LSB 16
#define PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN0_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN0

			RSSI of RX PPDU on chain 0 of extension 80, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN0_OFFSET 0x00000040
#define PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN0_LSB 24
#define PHYRX_PKT_END_16_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN0_MASK 0xff000000

/* Description		PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN1

			RSSI of RX PPDU on chain 1 of primary 20 MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN1_OFFSET 0x00000044
#define PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN1_LSB 0
#define PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN1_MASK 0x000000ff

/* Description		PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN1

			RSSI of RX PPDU on chain 1 of extension 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN1_OFFSET 0x00000044
#define PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN1_LSB 8
#define PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN1_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN1

			RSSI of RX PPDU on chain 1 of extension 40, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN1_OFFSET 0x00000044
#define PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN1_LSB 16
#define PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN1_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN1

			RSSI of RX PPDU on chain 1 of extension 40, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN1_OFFSET 0x00000044
#define PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN1_LSB 24
#define PHYRX_PKT_END_17_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN1_MASK 0xff000000

/* Description		PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN1

			RSSI of RX PPDU on chain 1 of extension 80, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN1_OFFSET 0x00000048
#define PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN1_LSB 0
#define PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN1_MASK 0x000000ff

/* Description		PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN1

			RSSI of RX PPDU on chain 1 of extension 80, low-high 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN1_OFFSET 0x00000048
#define PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN1_LSB 8
#define PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN1_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN1

			RSSI of RX PPDU on chain 1 of extension 80, high-low 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN1_OFFSET 0x00000048
#define PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN1_LSB 16
#define PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN1_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN1

			RSSI of RX PPDU on chain 1 of extension 80, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN1_OFFSET 0x00000048
#define PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN1_LSB 24
#define PHYRX_PKT_END_18_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN1_MASK 0xff000000

/* Description		PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN2

			RSSI of RX PPDU on chain 2 of primary 20 MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN2_OFFSET 0x0000004c
#define PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN2_LSB 0
#define PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN2_MASK 0x000000ff

/* Description		PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN2

			RSSI of RX PPDU on chain 2 of extension 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN2_OFFSET 0x0000004c
#define PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN2_LSB 8
#define PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN2_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN2

			RSSI of RX PPDU on chain 2 of extension 40, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN2_OFFSET 0x0000004c
#define PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN2_LSB 16
#define PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN2_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN2

			RSSI of RX PPDU on chain 2 of extension 40, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN2_OFFSET 0x0000004c
#define PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN2_LSB 24
#define PHYRX_PKT_END_19_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN2_MASK 0xff000000

/* Description		PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN2

			RSSI of RX PPDU on chain 2 of extension 80, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN2_OFFSET 0x00000050
#define PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN2_LSB 0
#define PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN2_MASK 0x000000ff

/* Description		PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN2

			RSSI of RX PPDU on chain 2 of extension 80, low-high 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN2_OFFSET 0x00000050
#define PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN2_LSB 8
#define PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN2_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN2

			RSSI of RX PPDU on chain 2 of extension 80, high-low 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN2_OFFSET 0x00000050
#define PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN2_LSB 16
#define PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN2_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN2

			RSSI of RX PPDU on chain 2 of extension 80, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN2_OFFSET 0x00000050
#define PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN2_LSB 24
#define PHYRX_PKT_END_20_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN2_MASK 0xff000000

/* Description		PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN3

			RSSI of RX PPDU on chain 3 of primary 20 MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN3_OFFSET 0x00000054
#define PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN3_LSB 0
#define PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN3_MASK 0x000000ff

/* Description		PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN3

			RSSI of RX PPDU on chain 3 of extension 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN3_OFFSET 0x00000054
#define PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN3_LSB 8
#define PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN3_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN3

			RSSI of RX PPDU on chain 3 of extension 40, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN3_OFFSET 0x00000054
#define PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN3_LSB 16
#define PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN3_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN3

			RSSI of RX PPDU on chain 3 of extension 40, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN3_OFFSET 0x00000054
#define PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN3_LSB 24
#define PHYRX_PKT_END_21_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN3_MASK 0xff000000

/* Description		PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN3

			RSSI of RX PPDU on chain 3 of extension 80, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN3_OFFSET 0x00000058
#define PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN3_LSB 0
#define PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN3_MASK 0x000000ff

/* Description		PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN3

			RSSI of RX PPDU on chain 3 of extension 80, low-high 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN3_OFFSET 0x00000058
#define PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN3_LSB 8
#define PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN3_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN3

			RSSI of RX PPDU on chain 3 of extension 80, high-low 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN3_OFFSET 0x00000058
#define PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN3_LSB 16
#define PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN3_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN3

			RSSI of RX PPDU on chain 3 of extension 80, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN3_OFFSET 0x00000058
#define PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN3_LSB 24
#define PHYRX_PKT_END_22_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN3_MASK 0xff000000

/* Description		PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN4

			RSSI of RX PPDU on chain 4 of primary 20 MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN4_OFFSET 0x0000005c
#define PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN4_LSB 0
#define PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN4_MASK 0x000000ff

/* Description		PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN4

			RSSI of RX PPDU on chain 4 of extension 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN4_OFFSET 0x0000005c
#define PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN4_LSB 8
#define PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN4_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN4

			RSSI of RX PPDU on chain 4 of extension 40, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN4_OFFSET 0x0000005c
#define PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN4_LSB 16
#define PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN4_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN4

			RSSI of RX PPDU on chain 4 of extension 40, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN4_OFFSET 0x0000005c
#define PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN4_LSB 24
#define PHYRX_PKT_END_23_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN4_MASK 0xff000000

/* Description		PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN4

			RSSI of RX PPDU on chain 4 of extension 80, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN4_OFFSET 0x00000060
#define PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN4_LSB 0
#define PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN4_MASK 0x000000ff

/* Description		PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN4

			RSSI of RX PPDU on chain 4 of extension 80, low-high 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN4_OFFSET 0x00000060
#define PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN4_LSB 8
#define PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN4_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN4

			RSSI of RX PPDU on chain 4 of extension 80, high-low 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN4_OFFSET 0x00000060
#define PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN4_LSB 16
#define PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN4_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN4

			RSSI of RX PPDU on chain 4 of extension 80, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN4_OFFSET 0x00000060
#define PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN4_LSB 24
#define PHYRX_PKT_END_24_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN4_MASK 0xff000000

/* Description		PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN5

			RSSI of RX PPDU on chain 0 of primary 20 MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN5_OFFSET 0x00000064
#define PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN5_LSB 0
#define PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN5_MASK 0x000000ff

/* Description		PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN5

			RSSI of RX PPDU on chain 5 of extension 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN5_OFFSET 0x00000064
#define PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN5_LSB 8
#define PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN5_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN5

			RSSI of RX PPDU on chain 5 of extension 40, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN5_OFFSET 0x00000064
#define PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN5_LSB 16
#define PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN5_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN5

			RSSI of RX PPDU on chain 5 of extension 40, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN5_OFFSET 0x00000064
#define PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN5_LSB 24
#define PHYRX_PKT_END_25_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN5_MASK 0xff000000

/* Description		PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN5

			RSSI of RX PPDU on chain 5 of extension 80, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN5_OFFSET 0x00000068
#define PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN5_LSB 0
#define PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN5_MASK 0x000000ff

/* Description		PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN5

			RSSI of RX PPDU on chain 5 of extension 80, low-high 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN5_OFFSET 0x00000068
#define PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN5_LSB 8
#define PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN5_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN5

			RSSI of RX PPDU on chain 5 of extension 80, high-low 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN5_OFFSET 0x00000068
#define PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN5_LSB 16
#define PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN5_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN5

			RSSI of RX PPDU on chain 5 of extension 80, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN5_OFFSET 0x00000068
#define PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN5_LSB 24
#define PHYRX_PKT_END_26_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN5_MASK 0xff000000

/* Description		PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN6

			RSSI of RX PPDU on chain 6 of primary 20 MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN6_OFFSET 0x0000006c
#define PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN6_LSB 0
#define PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN6_MASK 0x000000ff

/* Description		PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN6

			RSSI of RX PPDU on chain 6 of extension 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN6_OFFSET 0x0000006c
#define PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN6_LSB 8
#define PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN6_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN6

			RSSI of RX PPDU on chain 6 of extension 40, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN6_OFFSET 0x0000006c
#define PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN6_LSB 16
#define PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN6_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN6

			RSSI of RX PPDU on chain 6 of extension 40, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN6_OFFSET 0x0000006c
#define PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN6_LSB 24
#define PHYRX_PKT_END_27_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN6_MASK 0xff000000

/* Description		PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN6

			RSSI of RX PPDU on chain 6 of extension 80, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN6_OFFSET 0x00000070
#define PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN6_LSB 0
#define PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN6_MASK 0x000000ff

/* Description		PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN6

			RSSI of RX PPDU on chain 6 of extension 80, low-high 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN6_OFFSET 0x00000070
#define PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN6_LSB 8
#define PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN6_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN6

			RSSI of RX PPDU on chain 6 of extension 80, high-low 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN6_OFFSET 0x00000070
#define PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN6_LSB 16
#define PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN6_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN6

			RSSI of RX PPDU on chain 6 of extension 80, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN6_OFFSET 0x00000070
#define PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN6_LSB 24
#define PHYRX_PKT_END_28_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN6_MASK 0xff000000

/* Description		PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN7

			RSSI of RX PPDU on chain 7 of primary 20 MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN7_OFFSET 0x00000074
#define PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN7_LSB 0
#define PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_PRI20_CHAIN7_MASK 0x000000ff

/* Description		PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN7

			RSSI of RX PPDU on chain 7 of extension 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN7_OFFSET 0x00000074
#define PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN7_LSB 8
#define PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT20_CHAIN7_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN7

			RSSI of RX PPDU on chain 7 of extension 40, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN7_OFFSET 0x00000074
#define PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN7_LSB 16
#define PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_LOW20_CHAIN7_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN7

			RSSI of RX PPDU on chain 7 of extension 40, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN7_OFFSET 0x00000074
#define PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN7_LSB 24
#define PHYRX_PKT_END_29_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT40_HIGH20_CHAIN7_MASK 0xff000000

/* Description		PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN7

			RSSI of RX PPDU on chain 7 of extension 80, low 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN7_OFFSET 0x00000078
#define PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN7_LSB 0
#define PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW20_CHAIN7_MASK 0x000000ff

/* Description		PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN7

			RSSI of RX PPDU on chain 7 of extension 80, low-high 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN7_OFFSET 0x00000078
#define PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN7_LSB 8
#define PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_LOW_HIGH20_CHAIN7_MASK 0x0000ff00

/* Description		PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN7

			RSSI of RX PPDU on chain 7 of extension 80, high-low 20
			MHz bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN7_OFFSET 0x00000078
#define PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN7_LSB 16
#define PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH_LOW20_CHAIN7_MASK 0x00ff0000

/* Description		PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN7

			RSSI of RX PPDU on chain 7 of extension 80, high 20 MHz
			bandwidth.

			Value of 0x80 indicates invalid.
*/
#define PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN7_OFFSET 0x00000078
#define PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN7_LSB 24
#define PHYRX_PKT_END_30_RX_PKT_END_DETAILS_POST_RSSI_INFO_DETAILS_RSSI_EXT80_HIGH20_CHAIN7_MASK 0xff000000

/* Description		PHYRX_PKT_END_31_RX_PKT_END_DETAILS_PHY_SW_STATUS_31_0

			Some PHY micro code status that can be put in here.
			Details of definition within SW specification

			This field can be used for debugging, FW - SW message
			exchange, etc.

			It could for example be a pointer to a DDR memory
			location where PHY FW put some debug info.

			<legal all>
*/
#define PHYRX_PKT_END_31_RX_PKT_END_DETAILS_PHY_SW_STATUS_31_0_OFFSET 0x0000007c
#define PHYRX_PKT_END_31_RX_PKT_END_DETAILS_PHY_SW_STATUS_31_0_LSB   0
#define PHYRX_PKT_END_31_RX_PKT_END_DETAILS_PHY_SW_STATUS_31_0_MASK  0xffffffff

/* Description		PHYRX_PKT_END_32_RX_PKT_END_DETAILS_PHY_SW_STATUS_63_32

			Some PHY micro code status that can be put in here.
			Details of definition within SW specification

			This field can be used for debugging, FW - SW message
			exchange, etc.

			It could for example be a pointer to a DDR memory
			location where PHY FW put some debug info.

			<legal all>
*/
#define PHYRX_PKT_END_32_RX_PKT_END_DETAILS_PHY_SW_STATUS_63_32_OFFSET 0x00000080
#define PHYRX_PKT_END_32_RX_PKT_END_DETAILS_PHY_SW_STATUS_63_32_LSB  0
#define PHYRX_PKT_END_32_RX_PKT_END_DETAILS_PHY_SW_STATUS_63_32_MASK 0xffffffff


#endif // _PHYRX_PKT_END_H_