xref: /wlan-driver/fw-api/hw/qcn6122/phyrx_abort_request_info.h (revision 5113495b16420b49004c444715d2daae2066e7dc)
1 /*
2  * Copyright (c) 2020, The Linux Foundation. All rights reserved.
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16 
17 #ifndef _PHYRX_ABORT_REQUEST_INFO_H_
18 #define _PHYRX_ABORT_REQUEST_INFO_H_
19 #if !defined(__ASSEMBLER__)
20 #endif
21 
22 
23 // ################ START SUMMARY #################
24 //
25 //	Dword	Fields
26 //	0	phyrx_abort_reason[7:0], phy_enters_nap_state[8], phy_enters_defer_state[9], reserved_0[15:10], receive_duration[31:16]
27 //
28 // ################ END SUMMARY #################
29 
30 #define NUM_OF_DWORDS_PHYRX_ABORT_REQUEST_INFO 1
31 
32 struct phyrx_abort_request_info {
33              uint32_t phyrx_abort_reason              :  8, //[7:0]
34                       phy_enters_nap_state            :  1, //[8]
35                       phy_enters_defer_state          :  1, //[9]
36                       reserved_0                      :  6, //[15:10]
37                       receive_duration                : 16; //[31:16]
38 };
39 
40 /*
41 
42 phyrx_abort_reason
43 
44 			<enum 0 phyrx_err_phy_off> Reception aborted due to
45 			receiving a PHY_OFF TLV
46 
47 			<enum 1 phyrx_err_synth_off>
48 
49 			<enum 2 phyrx_err_ofdma_timing>
50 
51 			<enum 3 phyrx_err_ofdma_signal_parity>
52 
53 			<enum 4 phyrx_err_ofdma_rate_illegal>
54 
55 			<enum 5 phyrx_err_ofdma_length_illegal>
56 
57 			<enum 6 phyrx_err_ofdma_restart>
58 
59 			<enum 7 phyrx_err_ofdma_service>
60 
61 			<enum 8 phyrx_err_ppdu_ofdma_power_drop>
62 
63 
64 
65 			<enum 9 phyrx_err_cck_blokker>
66 
67 			<enum 10 phyrx_err_cck_timing>
68 
69 			<enum 11 phyrx_err_cck_header_crc>
70 
71 			<enum 12 phyrx_err_cck_rate_illegal>
72 
73 			<enum 13 phyrx_err_cck_length_illegal>
74 
75 			<enum 14 phyrx_err_cck_restart>
76 
77 			<enum 15 phyrx_err_cck_service>
78 
79 			<enum 16 phyrx_err_cck_power_drop>
80 
81 
82 
83 			<enum 17 phyrx_err_ht_crc_err>
84 
85 			<enum 18 phyrx_err_ht_length_illegal>
86 
87 			<enum 19 phyrx_err_ht_rate_illegal>
88 
89 			<enum 20 phyrx_err_ht_zlf>
90 
91 			<enum 21 phyrx_err_false_radar_ext>
92 
93 
94 
95 			<enum 22 phyrx_err_green_field>
96 
97 
98 
99 			<enum 23 phyrx_err_bw_gt_dyn_bw>
100 
101 			<enum 24 phyrx_err_leg_ht_mismatch>
102 
103 			<enum 25 phyrx_err_vht_crc_error>
104 
105 			<enum 26 phyrx_err_vht_siga_unsupported>
106 
107 			<enum 27 phyrx_err_vht_lsig_len_invalid>
108 
109 			<enum 28 phyrx_err_vht_ndp_or_zlf>
110 
111 			<enum 29 phyrx_err_vht_nsym_lt_zero>
112 
113 			<enum 30 phyrx_err_vht_rx_extra_symbol_mismatch>
114 
115 			<enum 31 phyrx_err_vht_rx_skip_group_id0>
116 
117 			<enum 32 phyrx_err_vht_rx_skip_group_id1to62>
118 
119 			<enum 33 phyrx_err_vht_rx_skip_group_id63>
120 
121 			<enum 34 phyrx_err_ofdm_ldpc_decoder_disabled>
122 
123 			<enum 35 phyrx_err_defer_nap>
124 
125 			<enum 36 phyrx_err_fdomain_timeout>
126 
127 			<enum 37 phyrx_err_lsig_rel_check>
128 
129 			<enum 38 phyrx_err_bt_collision>
130 
131 			<enum 39 phyrx_err_unsupported_mu_feedback>
132 
133 			<enum 40 phyrx_err_ppdu_tx_interrupt_rx>
134 
135 			<enum 41 phyrx_err_unsupported_cbf>
136 
137 
138 
139 			<enum 42 phyrx_err_other>  Should not really be used. If
140 			needed, ask for documentation update
141 
142 
143 
144 			<enum 43 phyrx_err_he_siga_unsupported > <enum 44
145 			phyrx_err_he_crc_error > <enum 45
146 			phyrx_err_he_sigb_unsupported > <enum 46
147 			phyrx_err_he_mu_mode_unsupported > <enum 47
148 			phyrx_err_he_ndp_or_zlf > <enum 48 phyrx_err_he_nsym_lt_zero
149 			> <enum 49 phyrx_err_he_ru_params_unsupported > <enum 50
150 			phyrx_err_he_num_users_unsupported ><enum 51
151 			phyrx_err_he_sounding_params_unsupported >
152 
153 
154 
155 			<enum 52 phyrx_err_MU_UL_no_power_detected>
156 
157 			<enum 53 phyrx_err_MU_UL_not_for_me>
158 
159 
160 
161 			<legal 0 - 53>
162 
163 phy_enters_nap_state
164 
165 			When set, PHY enters PHY NAP state after sending this
166 			abort
167 
168 
169 
170 			Note that nap and defer state are mutually exclusive.
171 
172 
173 
174 			Field put pro-actively in place....usage still to be
175 			agreed upon.
176 
177 			<legal all>
178 
179 phy_enters_defer_state
180 
181 			When set, PHY enters PHY defer state after sending this
182 			abort
183 
184 
185 
186 			Note that nap and defer state are mutually exclusive.
187 
188 
189 
190 			Field put pro-actively in place....usage still to be
191 			agreed upon.
192 
193 			<legal all>
194 
195 reserved_0
196 
197 			<legal 0>
198 
199 receive_duration
200 
201 			The remaining receive duration of this PPDU in the
202 			medium (in us). When PHY does not know this duration when
203 			this TLV is generated, the field will be set to 0.
204 
205 			The timing reference point is the reception by the MAC
206 			of this TLV. The value shall be accurate to within 2us.
207 
208 
209 
210 			In case Phy_enters_nap_state and/or
211 			Phy_enters_defer_state is set, there is a possibility that
212 			MAC PMM can also decide to go into a low(er) power state.
213 
214 			<legal all>
215 */
216 
217 
218 /* Description		PHYRX_ABORT_REQUEST_INFO_0_PHYRX_ABORT_REASON
219 
220 			<enum 0 phyrx_err_phy_off> Reception aborted due to
221 			receiving a PHY_OFF TLV
222 
223 			<enum 1 phyrx_err_synth_off>
224 
225 			<enum 2 phyrx_err_ofdma_timing>
226 
227 			<enum 3 phyrx_err_ofdma_signal_parity>
228 
229 			<enum 4 phyrx_err_ofdma_rate_illegal>
230 
231 			<enum 5 phyrx_err_ofdma_length_illegal>
232 
233 			<enum 6 phyrx_err_ofdma_restart>
234 
235 			<enum 7 phyrx_err_ofdma_service>
236 
237 			<enum 8 phyrx_err_ppdu_ofdma_power_drop>
238 
239 
240 
241 			<enum 9 phyrx_err_cck_blokker>
242 
243 			<enum 10 phyrx_err_cck_timing>
244 
245 			<enum 11 phyrx_err_cck_header_crc>
246 
247 			<enum 12 phyrx_err_cck_rate_illegal>
248 
249 			<enum 13 phyrx_err_cck_length_illegal>
250 
251 			<enum 14 phyrx_err_cck_restart>
252 
253 			<enum 15 phyrx_err_cck_service>
254 
255 			<enum 16 phyrx_err_cck_power_drop>
256 
257 
258 
259 			<enum 17 phyrx_err_ht_crc_err>
260 
261 			<enum 18 phyrx_err_ht_length_illegal>
262 
263 			<enum 19 phyrx_err_ht_rate_illegal>
264 
265 			<enum 20 phyrx_err_ht_zlf>
266 
267 			<enum 21 phyrx_err_false_radar_ext>
268 
269 
270 
271 			<enum 22 phyrx_err_green_field>
272 
273 
274 
275 			<enum 23 phyrx_err_bw_gt_dyn_bw>
276 
277 			<enum 24 phyrx_err_leg_ht_mismatch>
278 
279 			<enum 25 phyrx_err_vht_crc_error>
280 
281 			<enum 26 phyrx_err_vht_siga_unsupported>
282 
283 			<enum 27 phyrx_err_vht_lsig_len_invalid>
284 
285 			<enum 28 phyrx_err_vht_ndp_or_zlf>
286 
287 			<enum 29 phyrx_err_vht_nsym_lt_zero>
288 
289 			<enum 30 phyrx_err_vht_rx_extra_symbol_mismatch>
290 
291 			<enum 31 phyrx_err_vht_rx_skip_group_id0>
292 
293 			<enum 32 phyrx_err_vht_rx_skip_group_id1to62>
294 
295 			<enum 33 phyrx_err_vht_rx_skip_group_id63>
296 
297 			<enum 34 phyrx_err_ofdm_ldpc_decoder_disabled>
298 
299 			<enum 35 phyrx_err_defer_nap>
300 
301 			<enum 36 phyrx_err_fdomain_timeout>
302 
303 			<enum 37 phyrx_err_lsig_rel_check>
304 
305 			<enum 38 phyrx_err_bt_collision>
306 
307 			<enum 39 phyrx_err_unsupported_mu_feedback>
308 
309 			<enum 40 phyrx_err_ppdu_tx_interrupt_rx>
310 
311 			<enum 41 phyrx_err_unsupported_cbf>
312 
313 
314 
315 			<enum 42 phyrx_err_other>  Should not really be used. If
316 			needed, ask for documentation update
317 
318 
319 
320 			<enum 43 phyrx_err_he_siga_unsupported > <enum 44
321 			phyrx_err_he_crc_error > <enum 45
322 			phyrx_err_he_sigb_unsupported > <enum 46
323 			phyrx_err_he_mu_mode_unsupported > <enum 47
324 			phyrx_err_he_ndp_or_zlf > <enum 48 phyrx_err_he_nsym_lt_zero
325 			> <enum 49 phyrx_err_he_ru_params_unsupported > <enum 50
326 			phyrx_err_he_num_users_unsupported ><enum 51
327 			phyrx_err_he_sounding_params_unsupported >
328 
329 
330 
331 			<enum 52 phyrx_err_MU_UL_no_power_detected>
332 
333 			<enum 53 phyrx_err_MU_UL_not_for_me>
334 
335 
336 
337 			<legal 0 - 53>
338 */
339 #define PHYRX_ABORT_REQUEST_INFO_0_PHYRX_ABORT_REASON_OFFSET         0x00000000
340 #define PHYRX_ABORT_REQUEST_INFO_0_PHYRX_ABORT_REASON_LSB            0
341 #define PHYRX_ABORT_REQUEST_INFO_0_PHYRX_ABORT_REASON_MASK           0x000000ff
342 
343 /* Description		PHYRX_ABORT_REQUEST_INFO_0_PHY_ENTERS_NAP_STATE
344 
345 			When set, PHY enters PHY NAP state after sending this
346 			abort
347 
348 
349 
350 			Note that nap and defer state are mutually exclusive.
351 
352 
353 
354 			Field put pro-actively in place....usage still to be
355 			agreed upon.
356 
357 			<legal all>
358 */
359 #define PHYRX_ABORT_REQUEST_INFO_0_PHY_ENTERS_NAP_STATE_OFFSET       0x00000000
360 #define PHYRX_ABORT_REQUEST_INFO_0_PHY_ENTERS_NAP_STATE_LSB          8
361 #define PHYRX_ABORT_REQUEST_INFO_0_PHY_ENTERS_NAP_STATE_MASK         0x00000100
362 
363 /* Description		PHYRX_ABORT_REQUEST_INFO_0_PHY_ENTERS_DEFER_STATE
364 
365 			When set, PHY enters PHY defer state after sending this
366 			abort
367 
368 
369 
370 			Note that nap and defer state are mutually exclusive.
371 
372 
373 
374 			Field put pro-actively in place....usage still to be
375 			agreed upon.
376 
377 			<legal all>
378 */
379 #define PHYRX_ABORT_REQUEST_INFO_0_PHY_ENTERS_DEFER_STATE_OFFSET     0x00000000
380 #define PHYRX_ABORT_REQUEST_INFO_0_PHY_ENTERS_DEFER_STATE_LSB        9
381 #define PHYRX_ABORT_REQUEST_INFO_0_PHY_ENTERS_DEFER_STATE_MASK       0x00000200
382 
383 /* Description		PHYRX_ABORT_REQUEST_INFO_0_RESERVED_0
384 
385 			<legal 0>
386 */
387 #define PHYRX_ABORT_REQUEST_INFO_0_RESERVED_0_OFFSET                 0x00000000
388 #define PHYRX_ABORT_REQUEST_INFO_0_RESERVED_0_LSB                    10
389 #define PHYRX_ABORT_REQUEST_INFO_0_RESERVED_0_MASK                   0x0000fc00
390 
391 /* Description		PHYRX_ABORT_REQUEST_INFO_0_RECEIVE_DURATION
392 
393 			The remaining receive duration of this PPDU in the
394 			medium (in us). When PHY does not know this duration when
395 			this TLV is generated, the field will be set to 0.
396 
397 			The timing reference point is the reception by the MAC
398 			of this TLV. The value shall be accurate to within 2us.
399 
400 
401 
402 			In case Phy_enters_nap_state and/or
403 			Phy_enters_defer_state is set, there is a possibility that
404 			MAC PMM can also decide to go into a low(er) power state.
405 
406 			<legal all>
407 */
408 #define PHYRX_ABORT_REQUEST_INFO_0_RECEIVE_DURATION_OFFSET           0x00000000
409 #define PHYRX_ABORT_REQUEST_INFO_0_RECEIVE_DURATION_LSB              16
410 #define PHYRX_ABORT_REQUEST_INFO_0_RECEIVE_DURATION_MASK             0xffff0000
411 
412 
413 #endif // _PHYRX_ABORT_REQUEST_INFO_H_
414