xref: /wlan-driver/qca-wifi-host-cmn/umac/mlme/vdev_mgr/dispatcher/inc/wlan_vdev_mgr_tgt_if_tx_defs.h (revision 5113495b16420b49004c444715d2daae2066e7dc)
1 /*
2  * Copyright (c) 2019-2021 The Linux Foundation. All rights reserved.
3  * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
4  *
5  * Permission to use, copy, modify, and/or distribute this software for
6  * any purpose with or without fee is hereby granted, provided that the
7  * above copyright notice and this permission notice appear in all
8  * copies.
9  *
10  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
11  * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
12  * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
13  * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
14  * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
15  * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
16  * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
17  * PERFORMANCE OF THIS SOFTWARE.
18  */
19 
20 /**
21  * DOC: wlan_vdev_mgr_tgt_if_tx_defs.h
22  *
23  * This file provides definitions to data structures required for vdev Tx ops
24  */
25 
26 #ifndef __WLAN_VDEV_MGR_TX_OPS_DEFS_H__
27 #define __WLAN_VDEV_MGR_TX_OPS_DEFS_H__
28 
29 #include <qdf_nbuf.h>
30 #ifdef WLAN_FEATURE_11BE_MLO
31 #include <wlan_mlo_mgr_public_structs.h>
32 #endif
33 #include <wlan_mlme_dbg.h>
34 
35 /* slot time long */
36 #define WLAN_MLME_VDEV_SLOT_TIME_LONG   0x1
37 /* slot time short */
38 #define WLAN_MLME_VDEV_SLOT_TIME_SHORT  0x2
39 
40 #define WLAN_MU_SNIF_MAX_AIDS 4
41 
42 /**
43  * enum mlme_dev_setparam - type of set params pdev/vdev
44  * @MLME_PDEV_SETPARAM: pdev param
45  * @MLME_VDEV_SETPARAM: vdev param
46  */
47 enum mlme_dev_setparam {
48 	MLME_PDEV_SETPARAM = 0,
49 	MLME_VDEV_SETPARAM,
50 };
51 
52 #ifdef WLAN_BCN_RATECODE_ENABLE
53 /**
54  * enum mlme_bcn_tx_rate_code - beacon tx rate code
55  * @MLME_BCN_TX_RATE_CODE_1_M:
56  * @MLME_BCN_TX_RATE_CODE_2_M:
57  * @MLME_BCN_TX_RATE_CODE_5_5_M:
58  * @MLME_BCN_TX_RATE_CODE_6_M:
59  * @MLME_BCN_TX_RATE_CODE_9_M:
60  * @MLME_BCN_TX_RATE_CODE_11M:
61  * @MLME_BCN_TX_RATE_CODE_12_M:
62  * @MLME_BCN_TX_RATE_CODE_18_M:
63  * @MLME_BCN_TX_RATE_CODE_24_M:
64  * @MLME_BCN_TX_RATE_CODE_36_M:
65  * @MLME_BCN_TX_RATE_CODE_48_M:
66  * @MLME_BCN_TX_RATE_CODE_54_M:
67  */
68 enum mlme_bcn_tx_rate_code {
69 	MLME_BCN_TX_RATE_CODE_1_M = 0x83,
70 	MLME_BCN_TX_RATE_CODE_2_M = 0x82,
71 	MLME_BCN_TX_RATE_CODE_5_5_M = 0x81,
72 	MLME_BCN_TX_RATE_CODE_6_M = 0x03,
73 	MLME_BCN_TX_RATE_CODE_9_M = 0x07,
74 	MLME_BCN_TX_RATE_CODE_11M = 0x80,
75 	MLME_BCN_TX_RATE_CODE_12_M = 0x02,
76 	MLME_BCN_TX_RATE_CODE_18_M = 0x06,
77 	MLME_BCN_TX_RATE_CODE_24_M = 0x01,
78 	MLME_BCN_TX_RATE_CODE_36_M = 0x05,
79 	MLME_BCN_TX_RATE_CODE_48_M = 0x00,
80 	MLME_BCN_TX_RATE_CODE_54_M = 0x04,
81 };
82 #else
83 enum mlme_bcn_tx_rate_code {
84 	MLME_BCN_TX_RATE_CODE_1_M = 0x43,
85 	MLME_BCN_TX_RATE_CODE_2_M = 0x42,
86 	MLME_BCN_TX_RATE_CODE_5_5_M = 0x41,
87 	MLME_BCN_TX_RATE_CODE_6_M = 0x03,
88 	MLME_BCN_TX_RATE_CODE_9_M = 0x07,
89 	MLME_BCN_TX_RATE_CODE_11M = 0x40,
90 	MLME_BCN_TX_RATE_CODE_12_M = 0x02,
91 	MLME_BCN_TX_RATE_CODE_18_M = 0x06,
92 	MLME_BCN_TX_RATE_CODE_24_M = 0x01,
93 	MLME_BCN_TX_RATE_CODE_36_M = 0x05,
94 	MLME_BCN_TX_RATE_CODE_48_M = 0x00,
95 	MLME_BCN_TX_RATE_CODE_54_M = 0x04,
96 };
97 #endif
98 
99 /**
100  * enum wlan_mlme_host_sta_ps_param_uapsd - STA UPASD params
101  * @WLAN_MLME_HOST_STA_PS_UAPSD_AC0_DELIVERY_EN:
102  * @WLAN_MLME_HOST_STA_PS_UAPSD_AC0_TRIGGER_EN:
103  * @WLAN_MLME_HOST_STA_PS_UAPSD_AC1_DELIVERY_EN:
104  * @WLAN_MLME_HOST_STA_PS_UAPSD_AC1_TRIGGER_EN:
105  * @WLAN_MLME_HOST_STA_PS_UAPSD_AC2_DELIVERY_EN:
106  * @WLAN_MLME_HOST_STA_PS_UAPSD_AC2_TRIGGER_EN:
107  * @WLAN_MLME_HOST_STA_PS_UAPSD_AC3_DELIVERY_EN:
108  * @WLAN_MLME_HOST_STA_PS_UAPSD_AC3_TRIGGER_EN:
109  */
110 enum wlan_mlme_host_sta_ps_param_uapsd {
111 	WLAN_MLME_HOST_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
112 	WLAN_MLME_HOST_STA_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
113 	WLAN_MLME_HOST_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
114 	WLAN_MLME_HOST_STA_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
115 	WLAN_MLME_HOST_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
116 	WLAN_MLME_HOST_STA_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
117 	WLAN_MLME_HOST_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
118 	WLAN_MLME_HOST_STA_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
119 };
120 
121 /**
122  * enum wlan_mlme_host_vdev_start_status - vdev start status code
123  * @WLAN_MLME_HOST_VDEV_START_OK:
124  * @WLAN_MLME_HOST_VDEV_START_CHAN_INVALID:
125  * @WLAN_MLME_HOST_VDEV_START_CHAN_BLOCKED:
126  * @WLAN_MLME_HOST_VDEV_START_CHAN_DFS_VIOLATION:
127  * @WLAN_MLME_HOST_VDEV_START_CHAN_INVALID_REGDOMAIN:
128  * @WLAN_MLME_HOST_VDEV_START_CHAN_INVALID_BAND:
129  * @WLAN_MLME_HOST_VDEV_START_TIMEOUT:
130  * @WLAN_MLME_HOST_VDEV_START_TX_VAP_CFG_INVALID:
131  * @WLAN_MLME_HOST_VDEV_START_MAX_REASON: Max enumeration
132  */
133 enum wlan_mlme_host_vdev_start_status {
134 	WLAN_MLME_HOST_VDEV_START_OK = 0,
135 	WLAN_MLME_HOST_VDEV_START_CHAN_INVALID,
136 	WLAN_MLME_HOST_VDEV_START_CHAN_BLOCKED,
137 	WLAN_MLME_HOST_VDEV_START_CHAN_DFS_VIOLATION,
138 	WLAN_MLME_HOST_VDEV_START_CHAN_INVALID_REGDOMAIN,
139 	WLAN_MLME_HOST_VDEV_START_CHAN_INVALID_BAND,
140 	WLAN_MLME_HOST_VDEV_START_TIMEOUT,
141 	WLAN_MLME_HOST_VDEV_START_TX_VAP_CFG_INVALID,
142 	/* Add new response status code from here */
143 	WLAN_MLME_HOST_VDEV_START_MAX_REASON,
144 };
145 
146 /**
147  * string_from_start_rsp_status() - Convert start response status to string
148  * @start_rsp: start response status
149  *
150  * Please note to add new string in the array at index equal to
151  * its enum value in wlan_mlme_host_vdev_start_status.
152  */
string_from_start_rsp_status(enum wlan_mlme_host_vdev_start_status start_rsp)153 static inline char *string_from_start_rsp_status(
154 			enum wlan_mlme_host_vdev_start_status start_rsp)
155 {
156 	static const char *strings[] = { "START_OK",
157 					"CHAN_INVALID",
158 					"CHAN_BLOCKED",
159 					"CHAN_DFS_VIOLATION",
160 					"CHAN_INVALID_REGDOMAIN",
161 					"CHAN_INVALID_BAND",
162 					"START_RESPONSE_TIMEOUT",
163 					"TX_VAP_CONFIG_INVALID",
164 					"START_RESPONSE_UNKNOWN"};
165 
166 	if (start_rsp >= WLAN_MLME_HOST_VDEV_START_MAX_REASON)
167 		start_rsp = WLAN_MLME_HOST_VDEV_START_MAX_REASON;
168 
169 	return (char *)strings[start_rsp];
170 }
171 
172 /**
173  * enum wlan_mlme_host_start_event_param - start/restart resp event
174  * @WLAN_MLME_HOST_VDEV_START_RESP_EVENT: Start response
175  * @WLAN_MLME_HOST_VDEV_RESTART_RESP_EVENT: Restart response
176  */
177 enum wlan_mlme_host_start_event_param {
178 	WLAN_MLME_HOST_VDEV_START_RESP_EVENT = 0,
179 	WLAN_MLME_HOST_VDEV_RESTART_RESP_EVENT,
180 };
181 
182 /**
183  * enum wlan_mlme_custom_aggr_type: custom aggregate type
184  * @WLAN_MLME_CUSTOM_AGGR_TYPE_AMPDU: A-MPDU aggregation
185  * @WLAN_MLME_CUSTOM_AGGR_TYPE_AMSDU: A-MSDU aggregation
186  * @WLAN_MLME_CUSTOM_AGGR_TYPE_MAX: Max type
187  */
188 enum wlan_mlme_custom_aggr_type {
189 	WLAN_MLME_CUSTOM_AGGR_TYPE_AMPDU = 0,
190 	WLAN_MLME_CUSTOM_AGGR_TYPE_AMSDU = 1,
191 	WLAN_MLME_CUSTOM_AGGR_TYPE_MAX,
192 };
193 
194 /**
195  * struct sta_ps_params - sta ps cmd parameter
196  * @vdev_id: vdev id
197  * @param_id: sta ps parameter
198  * @value: sta ps parameter value
199  */
200 struct sta_ps_params {
201 	uint32_t vdev_id;
202 	uint32_t param_id;
203 	uint32_t value;
204 };
205 
206 /**
207  * struct rnr_bss_tbtt_info_param: Reported Vdev info
208  * @bss_mac: Mac address
209  * @beacon_intval: Beacon interval of reported AP
210  * @opclass: Channel Opclass
211  * @chan_idx: Channel number
212  * @next_qtime_tbtt_high: Tbtt higher 32bit
213  * @next_qtime_tbtt_low: Tbtt lower 32bit
214  */
215 struct rnr_bss_tbtt_info_param {
216 	uint8_t bss_mac[QDF_MAC_ADDR_SIZE];
217 	uint32_t beacon_intval;
218 	uint32_t opclass;
219 	uint32_t chan_idx;
220 	uint32_t next_qtime_tbtt_high;
221 	uint32_t next_qtime_tbtt_low;
222 };
223 
224 /**
225  * struct rnr_tbtt_multisoc_sync_param - Params to
226  * sync tbtt with non self SoCs timers
227  * @pdev_id: Host pdev_id
228  * @rnr_vap_count: Count of Vap to be included in WMI cmd
229  * @cmd_type: Set/Get tbtt sync info
230  * @rnr_bss_tbtt: Reported AP Vap info
231  */
232 struct rnr_tbtt_multisoc_sync_param {
233 	uint32_t pdev_id;
234 	uint8_t rnr_vap_count;
235 	uint8_t cmd_type;
236 	struct rnr_bss_tbtt_info_param *rnr_bss_tbtt;
237 };
238 
239 /**
240  * struct tbttoffset_params - Tbttoffset event params
241  * @vdev_id: Virtual AP device identifier
242  * @tbttoffset : Tbttoffset for the virtual AP device
243  * @vdev_tbtt_qtime_lo: Tbtt qtime low value
244  * @vdev_tbtt_qtime_hi: Tbtt qtime high value
245  */
246 struct tbttoffset_params {
247 	uint32_t vdev_id;
248 	uint32_t tbttoffset;
249 	uint32_t vdev_tbtt_qtime_lo;
250 	uint32_t vdev_tbtt_qtime_hi;
251 };
252 
253 /* Follow bitmap for sending the CSA switch count event */
254 #define WLAN_CSA_EVENT_BMAP_VALID_MASK 0X80000000
255 /* Send only when the switch count becomes zero, added for backward
256  * compatibility same can also be achieved by setting bitmap to 0X80000001.
257  */
258 #define WLAN_CSA_EVENT_BMAP_SWITCH_COUNT_ZERO    0
259 /* Send CSA switch count event for every update to switch count */
260 #define WLAN_CSA_EVENT_BMAP_ALL                  0XFFFFFFFF
261 
262 #ifdef WLAN_FEATURE_11BE_MLO
263 /**
264  * struct ml_bcn_partner_info - Partner link beacon information
265  * @vdev_id: Vdev id
266  * @hw_link_id: Unique hw link id across SoCs
267  * @beacon_interval: Beacon interval
268  * @csa_switch_count_offset: CSA switch count offset in beacon frame
269  * @ext_csa_switch_count_offset: ECSA switch count offset in beacon frame
270  * @per_sta_profile_offset: Pointer to per-STA profile info
271  * @quiet_ie_offset: Quiet IE offset
272  * @is_other_ie_present: Set true if other IEs are present in per-STA profile.
273  *                       If the flag is set to false, FW will remove per-STA
274  *                       profile IE when Quiet count reaches to 0.
275  */
276 struct ml_bcn_partner_info {
277 	uint32_t vdev_id;
278 	uint32_t hw_link_id;
279 	uint32_t beacon_interval;
280 	uint32_t csa_switch_count_offset;
281 	uint32_t ext_csa_switch_count_offset;
282 	uint32_t per_sta_profile_offset;
283 	uint32_t quiet_ie_offset;
284 	uint32_t is_other_ie_present;
285 };
286 
287 /**
288  * struct mlo_bcn_templ_partner_links - ML partner links
289  * @num_links: Number of links
290  * @partner_info: Partner link info
291  */
292 struct mlo_bcn_templ_partner_links {
293 	uint8_t num_links;
294 	struct ml_bcn_partner_info partner_info[WLAN_UMAC_MLO_MAX_VDEVS];
295 };
296 
297 /**
298  * struct mlo_bcn_tmpl_ml_info - Impacted link critical update information
299  * @hw_link_id: Unique hw link id across SoCs
300  * CU vdev map for the Critical update category-1 (Inclusion of CU IES)
301  * @cu_vdev_map_cat1_lo: bits 31:0 to represent vdev ids 0 to 31
302  * @cu_vdev_map_cat1_hi: bits 63:32 to represent vdev ids 32 to 63
303  * CU vdev map for the Critical update category-2 (modification of CU IES)
304  * @cu_vdev_map_cat2_lo: bits 31:0 to represent vdev ids 0 to 31
305  * @cu_vdev_map_cat2_hi: bits 63:32 to represent vdev ids 32 to 63
306  */
307 struct mlo_bcn_tmpl_ml_info {
308 	uint32_t hw_link_id;
309 	uint32_t cu_vdev_map_cat1_lo;
310 	uint32_t cu_vdev_map_cat1_hi;
311 	uint32_t cu_vdev_map_cat2_lo;
312 	uint32_t cu_vdev_map_cat2_hi;
313 };
314 #endif
315 
316 /**
317  * struct beacon_tmpl_params - beacon template cmd parameter
318  * @vdev_id: vdev id
319  * @tim_ie_offset: tim ie offset
320  * @mbssid_ie_offset: mbssid ie offset
321  * @tmpl_len: beacon template length
322  * @tmpl_len_aligned: beacon template alignment
323  * @csa_switch_count_offset: CSA switch count offset in beacon frame
324  * @ext_csa_switch_count_offset: ECSA switch count offset in beacon frame
325  * @esp_ie_offset: ESP IE offset in beacon frame
326  * @mu_edca_ie_offset: Mu EDCA IE offset in beacon frame
327  * @ema_params: The 4 octets in this field respectively indicate
328  *     ema_beacon_profile_periodicity, ema_beacon_tmpl_idx,
329  *     ema_first_tmpl and ema_last_tmpl in the order of low
330  *     to high
331  * @csa_event_bitmap: Specify when to send the CSA switch count status from FW
332  *     to host. Example: if CSA switch count event is needed to be sent when the
333  *     switch count is 0, 1, 4, and 5, set the bitmap to (0X80000033)
334  * @enable_bigtk: enable bigtk or not
335  * @frm: beacon template parameter
336  * @mlo_partner: Partner link information
337  * @cu_ml_info: Impacted link critical update information
338  */
339 struct beacon_tmpl_params {
340 	uint8_t vdev_id;
341 	uint32_t tim_ie_offset;
342 	uint32_t mbssid_ie_offset;
343 	uint32_t tmpl_len;
344 	uint32_t tmpl_len_aligned;
345 	uint32_t csa_switch_count_offset;
346 	uint32_t ext_csa_switch_count_offset;
347 	uint32_t esp_ie_offset;
348 	uint32_t mu_edca_ie_offset;
349 	uint32_t ema_params;
350 	uint32_t csa_event_bitmap;
351 	bool enable_bigtk;
352 	uint8_t *frm;
353 #ifdef WLAN_FEATURE_11BE_MLO
354 	struct mlo_bcn_templ_partner_links mlo_partner;
355 	struct mlo_bcn_tmpl_ml_info cu_ml_info;
356 #endif
357 };
358 
359 /**
360  * struct beacon_params - beacon cmd parameter
361  * @vdev_id: vdev id
362  * @beacon_interval: Beacon interval
363  * @wbuf: beacon buffer
364  * @frame_ctrl: frame control field
365  * @bcn_txant: beacon antenna
366  * @is_dtim_count_zero: is it dtim beacon
367  * @is_bitctl_reqd: is Bit control required
368  * @is_high_latency: Is this high latency target
369  */
370 struct beacon_params {
371 	uint8_t vdev_id;
372 	uint16_t beacon_interval;
373 	qdf_nbuf_t wbuf;
374 	uint16_t frame_ctrl;
375 	uint32_t bcn_txant;
376 	bool is_dtim_count_zero;
377 	bool is_bitctl_reqd;
378 	bool is_high_latency;
379 };
380 
381 /* struct fils_discovery_tmpl_params - FILS Discovery template cmd parameter
382  * @vdev_id: vdev ID
383  * @tmpl_len: FILS Discovery template length
384  * @tmpl_aligned: FILS Discovery template alignment
385  * @frm: FILS Discovery template parameter
386  */
387 struct fils_discovery_tmpl_params {
388 	uint8_t vdev_id;
389 	uint32_t tmpl_len;
390 	uint32_t tmpl_len_aligned;
391 	uint8_t *frm;
392 };
393 
394 /**
395  * struct mlme_channel_param - Channel parameters with all
396  *			info required by target.
397  * @chan_id: channel id
398  * @pwr: channel power
399  * @mhz: channel frequency
400  * @half_rate: is half rate
401  * @quarter_rate: is quarter rate
402  * @dfs_set: is dfs channel
403  * @dfs_set_cfreq2: is secondary freq dfs channel
404  * @is_chan_passive: is this passive channel
405  * @allow_ht: HT allowed in chan
406  * @allow_vht: VHT allowed on chan
407  * @set_agile: is agile mode
408  * @is_stadfs_en: STA DFS enabled
409  * @phy_mode: phymode (vht80 or ht40 or ...)
410  * @cfreq1: centre frequency on primary
411  * @cfreq2: centre frequency on secondary
412  * @maxpower: max power for channel
413  * @minpower: min power for channel
414  * @maxregpower: Max regulatory power
415  * @antennamax: Max antenna
416  * @reg_class_id: Regulatory class id.
417  * @puncture_bitmap: 11be static puncture bitmap
418  */
419 struct mlme_channel_param {
420 	uint8_t chan_id;
421 	uint8_t pwr;
422 	uint32_t mhz;
423 	uint32_t half_rate:1,
424 		quarter_rate:1,
425 		dfs_set:1,
426 		dfs_set_cfreq2:1,
427 		is_chan_passive:1,
428 		allow_ht:1,
429 		allow_vht:1,
430 		set_agile:1,
431 		is_stadfs_en:1;
432 	enum wlan_phymode phy_mode;
433 	uint32_t cfreq1;
434 	uint32_t cfreq2;
435 	int8_t   maxpower;
436 	int8_t   minpower;
437 	int8_t   maxregpower;
438 	uint8_t  antennamax;
439 	uint8_t  reg_class_id;
440 #ifdef WLAN_FEATURE_11BE
441 	uint16_t puncture_bitmap;
442 #endif
443 };
444 
445 /**
446  * struct vdev_mlme_mvr_param - Multiple vdev restart params
447  * @phymode: phymode information
448  * @preferred_tx_streams: preferred tx streams for VAP
449  * @preferred_rx_streams: preferred rx streams for VAP
450  */
451 struct vdev_mlme_mvr_param {
452 	uint32_t phymode;
453 	uint32_t preferred_tx_streams;
454 	uint32_t preferred_rx_streams;
455 };
456 
457 /**
458  * struct multiple_vdev_restart_params - Multiple vdev restart cmd parameter
459  * @pdev_id: Pdev identifier
460  * @requestor_id: Unique id identifying the module
461  * @disable_hw_ack: Flag to indicate disabling HW ACK during CAC
462  * @cac_duration_ms: CAC duration on the given channel
463  * @num_vdevs: No. of vdevs that need to be restarted
464  * @ch_param: Pointer to channel_param
465  * @vdev_ids: Pointer to array of vdev_ids
466  * @mvr_param: Pointer to array of multi vdev restart param
467  * @max_vdevs: Maximum vdev count of this pdev
468  * @mvr_bmap_enabled: flag indicating mvr-bitmap support
469  */
470 struct multiple_vdev_restart_params {
471 	uint32_t pdev_id;
472 	uint32_t requestor_id;
473 	uint32_t disable_hw_ack;
474 	uint32_t cac_duration_ms;
475 	uint32_t num_vdevs;
476 	struct mlme_channel_param ch_param;
477 	uint32_t *vdev_ids;
478 	struct vdev_mlme_mvr_param *mvr_param;
479 	uint32_t max_vdevs;
480 	uint8_t mvr_bmap_enabled;
481 };
482 
483 /**
484  * struct multiple_vdev_set_param - Multiple vdev set param command parameter
485  * @pdev_id: Pdev identifier
486  * @param_id: parameter id
487  * @param_value: parameter value
488  * @num_vdevs: number of vdevs
489  * @vdev_ids: Pointer to array of vdev_ids
490  */
491 struct multiple_vdev_set_param {
492 	uint32_t pdev_id;
493 	uint32_t param_id;
494 	uint32_t param_value;
495 	uint32_t num_vdevs;
496 	uint32_t vdev_ids[WLAN_UMAC_PDEV_MAX_VDEVS];
497 };
498 
499 /**
500  * struct peer_flush_params - peer flush cmd parameter
501  * @peer_tid_bitmap: peer tid bitmap
502  * @vdev_id: vdev id
503  * @peer_mac: peer mac address
504  */
505 struct peer_flush_params {
506 	uint32_t peer_tid_bitmap;
507 	uint8_t vdev_id;
508 	uint8_t peer_mac[QDF_MAC_ADDR_SIZE];
509 };
510 
511 /**
512  * struct peer_delete_cmd_params - peer delete cmd parameter
513  * @vdev_id: vdev id
514  * @hw_link_id_bitmap: logical link id bitmap for peers
515  * not getting created
516  * @is_mlo_link_switch: Is peer delete due to link switch
517  */
518 struct peer_delete_cmd_params {
519 	uint8_t vdev_id;
520 	uint32_t hw_link_id_bitmap;
521 	bool is_mlo_link_switch;
522 };
523 
524 /* Default FILS DISCOVERY/probe response sent in period of 20TU */
525 #define DEFAULT_FILS_DISCOVERY_PERIOD 20
526 #define DEFAULT_PROBE_RESP_PERIOD 20
527 
528 /**
529  * struct config_fils_params - FILS config params
530  * @vdev_id:  vdev id
531  * @fd_period:  0 - Disabled, non-zero - Period in ms (mili seconds)
532  * @send_prb_rsp_frame: send broadcast prb resp frame
533  */
534 struct config_fils_params {
535 	uint8_t vdev_id;
536 	uint32_t fd_period;
537 	uint32_t send_prb_rsp_frame: 1;
538 };
539 
540 /**
541  * struct config_ratemask_params - ratemask config parameters
542  * @vdev_id: vdev id
543  * @type: Type
544  * @lower32: Lower 32 bits in the 1st 64-bit value
545  * @higher32: Higher 32 bits in the 1st 64-bit value
546  * @lower32_2: Lower 32 bits in the 2nd 64-bit value
547  * @higher32_2: Higher 32 bits in the 2nd 64-bit value
548  */
549 struct config_ratemask_params {
550 	uint8_t vdev_id;
551 	uint8_t type;
552 	uint32_t lower32;
553 	uint32_t higher32;
554 	uint32_t lower32_2;
555 	uint32_t higher32_2;
556 };
557 
558 /**
559  * struct set_custom_aggr_size_params - custom aggr size params
560  * @vdev_id : vdev id
561  * @tx_aggr_size : TX aggr size
562  * @rx_aggr_size : RX aggr size
563  * @ac:
564  * @aggr_type:
565  * @tx_aggr_size_disable:
566  * @rx_aggr_size_disable:
567  * @tx_ac_enable:
568  * @aggr_ba_enable:
569  * @reserved: spare bits
570  */
571 struct set_custom_aggr_size_params {
572 	uint32_t  vdev_id;
573 	uint32_t tx_aggr_size;
574 	uint32_t rx_aggr_size;
575 	uint32_t ac:2,
576 		 aggr_type:1,
577 		 tx_aggr_size_disable:1,
578 		 rx_aggr_size_disable:1,
579 		 tx_ac_enable:1,
580 		 aggr_ba_enable:1,
581 		 reserved:25;
582 };
583 
584 /**
585  * struct sifs_trigger_param - sifs_trigger cmd parameter
586  * @vdev_id: vdev id
587  * @param_value: parameter value
588  */
589 struct sifs_trigger_param {
590 	uint32_t vdev_id;
591 	uint32_t param_value;
592 };
593 
594 /**
595  * struct set_neighbour_rx_params - Neighbour RX params
596  * @vdev_id: vdev id
597  * @idx: index of param
598  * @action: action
599  * @type: Type of param
600  */
601 struct set_neighbour_rx_params {
602 	uint8_t vdev_id;
603 	uint32_t idx;
604 	uint32_t action;
605 	uint32_t type;
606 };
607 
608 /**
609  * struct set_tx_peer_filter - Set tx peer filter
610  * @vdev_id: vdev id
611  * @idx: index of param
612  * @action: action
613  */
614 struct set_tx_peer_filter {
615 	uint8_t vdev_id;
616 	uint32_t idx;
617 	uint32_t action;
618 };
619 
620 /**
621  * struct vdev_scan_nac_rssi_params - NAC_RSSI cmd parameter
622  * @vdev_id: vdev id
623  * @bssid_addr: BSSID address
624  * @client_addr: client address
625  * @chan_num: channel number
626  * @action:NAC_RSSI action,
627  */
628 struct vdev_scan_nac_rssi_params {
629 	uint32_t vdev_id;
630 	uint8_t bssid_addr[QDF_MAC_ADDR_SIZE];
631 	uint8_t client_addr[QDF_MAC_ADDR_SIZE];
632 	uint32_t chan_num;
633 	uint32_t action; /* WMI_FILTER_NAC_RSSI_ACTION */
634 };
635 
636 #ifdef WLAN_FEATURE_11BE_MLO
637 /**
638  * struct mlo_vdev_start_flags - MLO start flags
639  * @mlo_enabled: indicate is MLO enabled
640  * @mlo_assoc_link: indicate is the link used to initialize
641  *                  the association of mlo connection
642  * @mlo_mcast_vdev: MLO cast vdev
643  * @emlsr_support: indicate non AP MLD STA supports eMLSR mode
644  * @mlo_link_add: Dynamic link addition
645  * @rsvd: reserved bits
646  */
647 struct mlo_vdev_start_flags {
648 	uint32_t mlo_enabled:1,
649 		 mlo_assoc_link:1,
650 		 mlo_mcast_vdev:1,
651 		 emlsr_support:1,
652 		 mlo_link_add:1,
653 		 rsvd:27;
654 };
655 
656 /**
657  * struct ml_vdev_start_partner_info - partner link info
658  * @vdev_id: vdev id
659  * @hw_mld_link_id: unique hw link id across SoCs
660  * @mac_addr: Partner mac address
661  */
662 struct ml_vdev_start_partner_info {
663 	uint32_t vdev_id;
664 	uint32_t hw_mld_link_id;
665 	uint8_t mac_addr[QDF_MAC_ADDR_SIZE];
666 };
667 
668 /**
669  * struct mlo_vdev_start_partner_links - ML partner links
670  * @num_links: Number of links
671  * @partner_info: Partner link info
672  */
673 struct mlo_vdev_start_partner_links {
674 	uint8_t num_links;
675 #ifdef WLAN_MLO_MULTI_CHIP
676 	struct ml_vdev_start_partner_info partner_info[WLAN_UMAC_MLO_MAX_VDEVS + WLAN_UMAC_MLO_MAX_BRIDGE_VDEVS];
677 #else
678 	struct ml_vdev_start_partner_info partner_info[WLAN_UMAC_MLO_MAX_VDEVS];
679 #endif
680 };
681 #endif
682 /**
683  * struct vdev_start_params - vdev start cmd parameter
684  * @vdev_id: vdev id
685  * @beacon_interval: beacon interval
686  * @dtim_period: dtim period
687  * @is_restart: flag to check if it is vdev
688  * @disable_hw_ack: to update disable hw ack flag
689  * @hidden_ssid: hidden ssid
690  * @pmf_enabled: pmf enabled
691  * @ssid: ssid MAC
692  * @num_noa_descriptors: number of noa descriptors
693  * @preferred_tx_streams: preferred tx streams
694  * @preferred_rx_streams: preferred rx streams
695  * @cac_duration_ms: cac duration in milliseconds
696  * @regdomain: Regulatory domain
697  * @he_ops: HE ops
698  * @eht_ops: EHT ops
699  * @channel: Channel params required by target.
700  * @bcn_tx_rate_code: Beacon tx rate code.
701  * @ldpc_rx_enabled: Enable/Disable LDPC RX for this vdev
702  * @mbssid_flags: MBSSID flags to FW
703  * @vdevid_trans: Tx VDEV ID
704  * @mlo_flags: Flags for multi-link operation
705  * @mlo_partner: Partner links for multi-link operation
706  * @mbssid_multi_group_flag: Flag to identify multi group mbssid support
707  * @mbssid_multi_group_id: Group id of current vdev
708  */
709 struct vdev_start_params {
710 	uint8_t vdev_id;
711 	uint32_t beacon_interval;
712 	uint32_t dtim_period;
713 	bool is_restart;
714 	uint32_t disable_hw_ack;
715 	bool hidden_ssid;
716 	bool pmf_enabled;
717 	struct wlan_ssid ssid;
718 	uint32_t num_noa_descriptors;
719 	uint32_t preferred_rx_streams;
720 	uint32_t preferred_tx_streams;
721 	uint32_t cac_duration_ms;
722 	uint32_t regdomain;
723 	uint32_t he_ops;
724 #ifdef WLAN_FEATURE_11BE
725 	uint32_t eht_ops;
726 #endif
727 	struct mlme_channel_param channel;
728 	enum mlme_bcn_tx_rate_code bcn_tx_rate_code;
729 	bool ldpc_rx_enabled;
730 	uint32_t mbssid_flags;
731 	uint8_t vdevid_trans;
732 #ifdef WLAN_FEATURE_11BE_MLO
733 	struct mlo_vdev_start_flags mlo_flags;
734 	struct mlo_vdev_start_partner_links mlo_partner;
735 #endif
736 	uint8_t mbssid_multi_group_flag;
737 	uint32_t mbssid_multi_group_id;
738 };
739 
740 /**
741  * struct vdev_set_params - vdev set cmd parameter
742  * @vdev_id: vdev id
743  * @param_id: parameter id
744  * @param_value: parameter value
745  */
746 struct vdev_set_params {
747 	uint32_t vdev_id;
748 	uint32_t param_id;
749 	uint32_t param_value;
750 };
751 
752 /**
753  * struct dev_set_param - vdev/pdev set param info
754  * @param_id: parameter id
755  * @param_value: parameter value
756  */
757 struct dev_set_param {
758 	uint32_t param_id;
759 	uint32_t param_value;
760 };
761 
762 /**
763  * struct set_multiple_pdev_vdev_param
764  * @param_type: enum of type mlme_dev_setparam
765  * @is_host_pdev_id: to indicate @dev_id holds host pdev id in case of pdev set
766  * param, need conversion to target pdev id before sending to fw.
767  * @dev_id: unique dev_id identifying the VDEV/PDEV
768  * @n_params: Number of parambers to set
769  * @params: pointer to dev_set_param structure
770  */
771 struct set_multiple_pdev_vdev_param {
772 	enum mlme_dev_setparam param_type;
773 	uint8_t is_host_pdev_id;
774 	uint8_t dev_id;
775 	uint8_t n_params;
776 	struct dev_set_param *params;
777 };
778 
779 /**
780  * struct set_rx_mac_filter - Set rx mac filter command parameters
781  * @vdev_id: Vdev id
782  * @mac: mac addr
783  * @freq: frequency
784  * @set: set or clear
785  */
786 struct set_rx_mac_filter {
787 	uint32_t vdev_id;
788 	uint8_t mac[QDF_MAC_ADDR_SIZE];
789 	uint32_t freq;
790 	bool set;
791 };
792 
793 static inline
mlme_check_index_setparam(struct dev_set_param * param,uint32_t paramid,uint32_t paramvalue,uint8_t index,uint8_t n_params)794 QDF_STATUS mlme_check_index_setparam(struct dev_set_param *param,
795 				     uint32_t paramid, uint32_t paramvalue,
796 				     uint8_t index, uint8_t n_params)
797 {
798 	if (index >= n_params) {
799 		mlme_err("Index:%d OOB to fill param", index);
800 		return QDF_STATUS_E_FAILURE;
801 	}
802 	param[index].param_id = paramid;
803 	param[index].param_value = paramvalue;
804 	return QDF_STATUS_SUCCESS;
805 }
806 
807 /**
808  * struct vdev_set_mu_snif_param - vdev set mu sniffer cmd parameter
809  * @vdev_id: vdev id
810  * @mode: mu snif mode
811  * @num_user: max number of user
812  * @num_aid: number of set sta aid
813  * @aid: sta aids
814  */
815 
816 struct vdev_set_mu_snif_param {
817 	uint32_t vdev_id;
818 	uint32_t mode;
819 	uint32_t num_user;
820 	uint32_t num_aid;
821 	uint32_t aid[WLAN_MU_SNIF_MAX_AIDS];
822 };
823 
824 /**
825  * struct vdev_create_params - vdev create cmd parameter
826  * @vdev_id: interface id
827  * @vdev_stats_id_valid: flag to indicate valid stats id
828  * @vdev_stats_id: stats_id for stats collection
829  * @type: interface type
830  * @subtype: interface subtype
831  * @nss_2g: NSS for 2G
832  * @nss_5g: NSS for 5G
833  * @pdev_id: pdev id on pdev for this vdev
834  * @mbssid_flags: MBSS IE flags indicating vdev type
835  * @vdevid_trans: id of transmitting vdev for MBSS IE
836  * @special_vdev_mode: indicates special vdev mode
837  * @mlo_mac: Multilink Operation MAC address
838  */
839 struct vdev_create_params {
840 	uint8_t vdev_id;
841 	bool vdev_stats_id_valid;
842 	uint8_t vdev_stats_id;
843 	uint32_t type;
844 	uint32_t subtype;
845 	uint8_t nss_2g;
846 	uint8_t nss_5g;
847 	uint32_t pdev_id;
848 	uint32_t mbssid_flags;
849 	uint8_t vdevid_trans;
850 	bool special_vdev_mode;
851 #ifdef WLAN_FEATURE_11BE_MLO
852 	uint8_t mlo_mac[QDF_MAC_ADDR_SIZE];
853 #endif
854 };
855 
856 /**
857  * struct vdev_delete_params - vdev delete cmd parameter
858  * @vdev_id: vdev id
859  */
860 struct vdev_delete_params {
861 	uint8_t vdev_id;
862 };
863 
864 /**
865  * struct vdev_stop_params - vdev stop cmd parameter
866  * @vdev_id: vdev id
867  * @is_mlo_link_switch: Is VDEV stop due to link switch
868  */
869 struct vdev_stop_params {
870 	uint8_t vdev_id;
871 	bool is_mlo_link_switch;
872 };
873 
874 /**
875  * struct vdev_up_params - vdev up cmd parameter
876  * @vdev_id: vdev id
877  * @assoc_id: association id
878  * @profile_idx: profile index of the connected non-trans ap (mbssid case).
879  *		0  means invalid.
880  * @profile_num: the total profile numbers of non-trans aps (mbssid case).
881  *		0 means non-MBSS AP.
882  * @trans_bssid: bssid of transmitted AP (MBSS IE case)
883  */
884 struct vdev_up_params {
885 	uint8_t vdev_id;
886 	uint16_t assoc_id;
887 	uint32_t profile_idx;
888 	uint32_t profile_num;
889 	uint8_t trans_bssid[QDF_MAC_ADDR_SIZE];
890 };
891 
892 /**
893  * struct vdev_down_params - vdev down cmd parameter
894  * @vdev_id: vdev id
895  */
896 struct vdev_down_params {
897 	uint8_t vdev_id;
898 };
899 
900 /**
901  * struct peer_delete_all_params - peer delete all request parameter
902  * @vdev_id: vdev id
903  * @peer_type_bitmap: Bitmap of type with bits corresponding to value from
904  * enum wlan_peer_type
905  */
906 struct peer_delete_all_params {
907 	uint8_t vdev_id;
908 	uint32_t peer_type_bitmap;
909 };
910 
911 #define AC_MAX 4
912 #define WMI_MUEDCA_PARAM_MASK 0xff
913 /**
914  * struct muedca_params - MU-EDCA parameters
915  * @pdev_id: pdev id
916  * @muedca_ecwmin: CWmin in exponential form
917  * @muedca_ecwmax: CWmax in exponential form
918  * @muedca_aifsn:  AIFSN parameter
919  * @muedca_acm:    ACM parameter
920  * @muedca_timer:  MU EDCA timer value
921  */
922 struct muedca_params {
923 	uint32_t pdev_id;
924 	uint8_t muedca_ecwmin[AC_MAX];      /* CWmin in exponential form */
925 	uint8_t muedca_ecwmax[AC_MAX];      /* CWmax in exponential form */
926 	uint8_t muedca_aifsn[AC_MAX];       /* AIFSN parameter */
927 	uint8_t muedca_acm[AC_MAX];         /* ACM parameter */
928 	uint8_t muedca_timer[AC_MAX];       /* MU EDCA timer value */
929 };
930 
931 /* Total 10 BSSIDs can be packed in a single measurement request buffer */
932 #define RTT_MAX_BSSIDS_TO_SCAN  10
933 
934 /**
935  * struct rtt_bssid_info - Store the parsed macaddr and BW from the measurement
936  *                         request buffer.
937  * @macaddr: Destination macaddr to scan
938  * @bw: packet bandwidth
939  */
940 struct rtt_bssid_info {
941 	uint8_t macaddr[QDF_MAC_ADDR_SIZE];
942 	uint8_t bw;
943 };
944 
945 /**
946  * struct rtt_channel_info - Store the parsed channel info from LOWI measurement
947  *                           request buffer.
948  * @freq: Channel frequency
949  * @cfreq1: Center frequency1
950  * @cfreq2: Center frequency2
951  * @phymode: Phymode
952  * @num_bssids: Number of bssids present in the measurement request buffer
953  * @bssid_info: Array to store BW and macaddr present in the measurement request
954  *              buffer.
955  */
956 struct rtt_channel_info {
957 	uint16_t freq;
958 	uint16_t cfreq1;
959 	uint16_t cfreq2;
960 	uint16_t phymode;
961 	uint16_t num_bssids;
962 	struct rtt_bssid_info bssid_info[RTT_MAX_BSSIDS_TO_SCAN];
963 };
964 
965 /**
966  * struct sr_prohibit_param - SR prohibit command parameter
967  *
968  * @vdev_id: vdev id
969  * @sr_he_siga_val15_allowed: HE_SIG_A_VAL15_ALLOWED is enabled/disabled
970  */
971 struct sr_prohibit_param {
972 	uint8_t vdev_id;
973 	bool sr_he_siga_val15_allowed;
974 };
975 #endif /* __WLAN_VDEV_MGR_TX_OPS_DEFS_H__ */
976