xref: /wlan-driver/qcacld-3.0/components/wmi/inc/wmi_unified_roam_api.h (revision 5113495b16420b49004c444715d2daae2066e7dc)
1 /*
2  * Copyright (c) 2013-2021, The Linux Foundation. All rights reserved.
3  * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
4  *
5  * Permission to use, copy, modify, and/or distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17 
18 /**
19  * DOC: Implement API's specific to ROAMING component.
20  */
21 
22 #ifndef _WMI_UNIFIED_ROAM_API_H_
23 #define _WMI_UNIFIED_ROAM_API_H_
24 
25 #include <wmi_unified_roam_param.h>
26 #include "wlan_cm_roam_public_struct.h"
27 #include "wlan_crypto_def_i.h"
28 
29 #ifdef FEATURE_LFR_SUBNET_DETECTION
30 /**
31  * wmi_unified_set_gateway_params_cmd() - set gateway parameters
32  * @wmi_handle: wmi handle
33  * @req: gateway parameter update request structure
34  *
35  * This function reads the incoming @req and fill in the destination
36  * WMI structure and sends down the gateway configs down to the firmware
37  *
38  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures;
39  *         error number otherwise
40  */
41 QDF_STATUS
42 wmi_unified_set_gateway_params_cmd(wmi_unified_t wmi_handle,
43 				   struct gateway_update_req_param *req);
44 #endif
45 
46 #ifdef FEATURE_RSSI_MONITOR
47 /**
48  * wmi_unified_set_rssi_monitoring_cmd() - set rssi monitoring
49  * @wmi_handle: wmi handle
50  * @req: rssi monitoring request structure
51  *
52  * This function reads the incoming @req and fill in the destination
53  * WMI structure and send down the rssi monitoring configs down to the firmware
54  *
55  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures;
56  *         error number otherwise
57  */
58 QDF_STATUS
59 wmi_unified_set_rssi_monitoring_cmd(wmi_unified_t wmi_handle,
60 				    struct rssi_monitor_param *req);
61 #endif
62 
63 /**
64  * wmi_unified_roam_scan_offload_rssi_thresh_cmd() - set roam scan rssi
65  *							parameters
66  * @wmi_handle: wmi handle
67  * @roam_req: roam rssi related parameters
68  *
69  * This function reads the incoming @roam_req and fill in the destination
70  * WMI structure and send down the roam scan rssi configs down to the firmware
71  *
72  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
73  */
74 QDF_STATUS wmi_unified_roam_scan_offload_rssi_thresh_cmd(
75 		wmi_unified_t wmi_handle,
76 		struct wlan_roam_offload_scan_rssi_params *roam_req);
77 
78 /**
79  * wmi_unified_roam_scan_offload_scan_period() - set roam offload scan period
80  * @wmi_handle: wmi handle
81  * @param: pointer to roam scan period params to be sent to fw
82  *
83  * Send WMI_ROAM_SCAN_PERIOD parameters to fw.
84  *
85  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
86  */
87 QDF_STATUS wmi_unified_roam_scan_offload_scan_period(
88 	wmi_unified_t wmi_handle, struct wlan_roam_scan_period_params *param);
89 
90 /**
91  * wmi_unified_roam_mawc_params_cmd() - configure roaming MAWC parameters
92  * @wmi_handle: wmi handle
93  * @params: Parameters to be configured
94  *
95  * Pass the MAWC(Motion Aided wireless connectivity) related roaming
96  * parameters from the host to the target
97  *
98  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
99  */
100 QDF_STATUS
101 wmi_unified_roam_mawc_params_cmd(wmi_unified_t wmi_handle,
102 				 struct wlan_roam_mawc_params *params);
103 
104 #ifdef WLAN_VENDOR_HANDOFF_CONTROL
105 /**
106  * wmi_extract_roam_vendor_control_param_event() - extract vendor handoff param
107  * event coming from fw
108  * @wmi_handle: wmi handle
109  * @event: vendor handoff param event pointer
110  * @len: event len
111  * @data: vendor handoff related parameters
112  *
113  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
114  */
115 
116 QDF_STATUS
117 wmi_extract_roam_vendor_control_param_event(wmi_unified_t wmi_handle,
118 				uint8_t *event, uint32_t len,
119 				struct roam_vendor_handoff_params **data);
120 
121 #endif
122 
123 #if defined(WLAN_FEATURE_ROAM_OFFLOAD) && defined(WLAN_FEATURE_11BE_MLO)
124 /**
125  * wmi_extract_roam_synch_key_event() - extract roam synch key event
126  * @wmi_handle: wmi handle
127  * @event: roam synch key event buffer pointer
128  * @len: event len
129  * @keys: destination buffer to copy keys
130  * @num_keys: Number of keys
131  * @mld_addr: MLD address pointer
132  *
133  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
134  */
135 QDF_STATUS
136 wmi_extract_roam_synch_key_event(wmi_unified_t wmi_handle, uint8_t *event,
137 				 uint32_t len,
138 				 struct wlan_crypto_key_entry **keys,
139 				 uint8_t *num_keys,
140 				 struct qdf_mac_addr *mld_addr);
141 #else
142 static inline QDF_STATUS
wmi_extract_roam_synch_key_event(wmi_unified_t wmi_handle,uint8_t * event,uint32_t len,struct wlan_crypto_key_entry ** keys,uint8_t * num_keys,struct qdf_mac_addr * mld_addr)143 wmi_extract_roam_synch_key_event(wmi_unified_t wmi_handle, uint8_t *event,
144 				 uint32_t len,
145 				 struct wlan_crypto_key_entry **keys,
146 				 uint8_t *num_keys,
147 				 struct qdf_mac_addr *mld_addr)
148 {
149 	return QDF_STATUS_E_NOSUPPORT;
150 }
151 #endif
152 
153 /**
154  * wmi_unified_roam_scan_filter_cmd() - send roam scan allowlist,
155  *                                      denylist and preferred list
156  * @wmi_handle: wmi handle
157  * @roam_req: roam scan lists related parameters
158  *
159  * This function reads the incoming @roam_req and fill in the destination
160  * WMI structure and send down the different roam scan lists down to the fw
161  *
162  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
163  */
164 QDF_STATUS
165 wmi_unified_roam_scan_filter_cmd(wmi_unified_t wmi_handle,
166 				 struct roam_scan_filter_params *roam_req);
167 
168 #ifdef FEATURE_WLAN_ESE
169 /**
170  * wmi_unified_plm_stop_cmd() - plm stop request
171  * @wmi_handle: wmi handle
172  * @plm: plm request parameters
173  *
174  * This function request FW to stop PLM.
175  *
176  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
177  */
178 QDF_STATUS wmi_unified_plm_stop_cmd(wmi_unified_t wmi_handle,
179 				    const struct plm_req_params *plm);
180 
181 /**
182  * wmi_unified_plm_start_cmd() - plm start request
183  * @wmi_handle: wmi handle
184  * @plm: plm request parameters
185  *
186  * This function request FW to start PLM.
187  *
188  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
189  */
190 QDF_STATUS wmi_unified_plm_start_cmd(wmi_unified_t wmi_handle,
191 				     const struct plm_req_params *plm);
192 #endif /* FEATURE_WLAN_ESE */
193 
194 #if defined(WLAN_FEATURE_HOST_ROAM) || defined(WLAN_FEATURE_ROAM_OFFLOAD)
195 /**
196  * wmi_extract_roam_event  - Extract roam event
197  * @wmi_handle: WMI handle
198  * @event: Event data received from firmware
199  * @data_len: Event data length received from firmware
200  * @roam_event: Extract the event and fill in roam_event
201  *
202  * Return: QDF_STATUS
203  */
204 QDF_STATUS
205 wmi_extract_roam_event(wmi_unified_t wmi_handle, uint8_t *event,
206 		       uint32_t data_len,
207 		       struct roam_offload_roam_event *roam_event);
208 #endif /* WLAN_FEATURE_HOST_ROAM || WLAN_FEATURE_ROAM_OFFLOAD */
209 
210 #ifdef WLAN_FEATURE_ROAM_OFFLOAD
211 /* wmi_unified_set_ric_req_cmd() - set ric request element
212  * @wmi_handle: wmi handle
213  * @msg: message
214  * @is_add_ts: is addts required
215  *
216  * This function sets ric request element for 11r roaming.
217  *
218  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
219  */
220 QDF_STATUS wmi_unified_set_ric_req_cmd(wmi_unified_t wmi_handle, void *msg,
221 				       uint8_t is_add_ts);
222 
223 /**
224  * wmi_unified_roam_synch_complete_cmd() - roam synch complete command to fw.
225  * @wmi_handle: wmi handle
226  * @vdev_id: vdev id
227  *
228  * This function sends roam synch complete event to fw.
229  *
230  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
231  */
232 QDF_STATUS wmi_unified_roam_synch_complete_cmd(wmi_unified_t wmi_handle,
233 					       uint8_t vdev_id);
234 
235 /**
236  * wmi_unified_roam_invoke_cmd() - send roam invoke command to fw.
237  * @wmi_handle: wmi handle
238  * @roaminvoke: roam invoke command
239  *
240  * Send roam invoke command to fw for fastreassoc.
241  *
242  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
243  */
244 QDF_STATUS
245 wmi_unified_roam_invoke_cmd(wmi_unified_t wmi_handle,
246 			    struct roam_invoke_req *roaminvoke);
247 
248 /**
249  * wmi_unified_set_roam_triggers() - send roam trigger bitmap
250  * @wmi_handle: wmi handle
251  * @triggers: Roam trigger bitmap params as defined @roam_control_trigger_reason
252  *
253  * This function passes the roam trigger bitmap to fw
254  *
255  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
256  */
257 QDF_STATUS wmi_unified_set_roam_triggers(wmi_unified_t wmi_handle,
258 					 struct wlan_roam_triggers *triggers);
259 
260 /**
261  * wmi_unified_send_disconnect_roam_params() - Send disconnect roam trigger
262  * parameters to firmware
263  * @wmi_handle:  wmi handle
264  * @req: pointer to wlan_roam_disconnect_params
265  *
266  * Return: QDF_STATUS
267  */
268 QDF_STATUS
269 wmi_unified_send_disconnect_roam_params(wmi_unified_t wmi_handle,
270 				struct wlan_roam_disconnect_params *req);
271 
272 #ifdef WLAN_VENDOR_HANDOFF_CONTROL
273 /**
274  * wmi_unified_roam_vendor_handoff_req_cmd() - Send vendor handoff request
275  * command to fw
276  * @wmi_handle:  wmi handle
277  * @vdev_id: vdev id
278  * @param_id: Vendor Control Param ID from enum
279  * WMI_ROAM_GET_VENDOR_CONTROL_PARAM_ID
280  *
281  * Return: QDF_STATUS
282  */
283 QDF_STATUS wmi_unified_roam_vendor_handoff_req_cmd(wmi_unified_t wmi_handle,
284 						   uint8_t vdev_id,
285 						   uint32_t param_id);
286 #endif
287 
288 /**
289  * wmi_unified_send_idle_roam_params() - Send idle roam trigger params to fw
290  * @wmi_handle:  wmi handle
291  * @req: pointer to wlan_roam_idle_params
292  *
293  * Return: QDF_STATUS
294  */
295 QDF_STATUS
296 wmi_unified_send_idle_roam_params(wmi_unified_t wmi_handle,
297 				  struct wlan_roam_idle_params *req);
298 
299 /**
300  * wmi_unified_send_roam_preauth_status() - Send roam preauthentication status
301  * to target.
302  * @wmi_handle: wmi handle
303  * @param: Roam auth status params
304  *
305  * This function passes preauth status of WPA3 SAE auth to firmware. It is
306  * called when external_auth_status event is received from userspace.
307  *
308  * Return: QDF_STATUS
309  */
310 QDF_STATUS
311 wmi_unified_send_roam_preauth_status(wmi_unified_t wmi_handle,
312 				     struct wmi_roam_auth_status_params *param);
313 
314 /**
315  * wmi_unified_vdev_set_pcl_cmd  - Send Vdev PCL command to fw
316  * @wmi_handle: WMI handle
317  * @params: Set VDEV pcl parameters
318  *
319  * Return: QDF_STATUS
320  */
321 QDF_STATUS wmi_unified_vdev_set_pcl_cmd(wmi_unified_t wmi_handle,
322 					struct set_pcl_cmd_params *params);
323 
324 /**
325  * wmi_extract_roam_sync_event  - Extract roam sync event
326  * @wmi_handle: WMI handle
327  * @evt_buf: Event buffer
328  * @len: evt buffer data len
329  * @sync_ind: roam sync ptr
330  *
331  * This api will allocate memory for roam sync info, extract
332  * the information sent by FW and pass to CM.The memory will be
333  * freed by target_if_cm_roam_sync_event.
334  *
335  * Return: QDF_STATUS
336  */
337 QDF_STATUS
338 wmi_extract_roam_sync_event(wmi_unified_t wmi_handle, void *evt_buf,
339 			    uint32_t len,
340 			    struct roam_offload_synch_ind **sync_ind);
341 
342 /**
343  * wmi_extract_roam_sync_frame_event  - Extract roam sync frame event
344  * @wmi_handle: WMI handle
345  * @event: Event buffer
346  * @len: evt buffer data len
347  * @frame_ptr: roam sync frame ptr
348  *
349  * Return: QDF_STATUS
350  */
351 QDF_STATUS
352 wmi_extract_roam_sync_frame_event(wmi_unified_t wmi_handle, void *event,
353 				  uint32_t len,
354 				  struct roam_synch_frame_ind *frame_ptr);
355 
356 /**
357  * wmi_extract_btm_denylist_event - Extract btm denylist event
358  * @wmi_handle: WMI handle
359  * @event: Event data received from firmware
360  * @data_len: Event data length received from firmware
361  * @dst_list: Extract the event and fill in dst_list
362  *
363  * Return: QDF_STATUS
364  */
365 QDF_STATUS
366 wmi_extract_btm_denylist_event(wmi_unified_t wmi_handle,
367 			       uint8_t *event, uint32_t data_len,
368 			       struct roam_denylist_event **dst_list);
369 
370 /**
371  * wmi_extract_vdev_disconnect_event - Extract disconnect event data
372  * @wmi_handle: WMI handle
373  * @event: Event data received from firmware
374  * @data_len: Event data length received from firmware
375  * @data: Extract the event and fill in data
376  *
377  * Return: QDF_STATUS
378  */
379 QDF_STATUS
380 wmi_extract_vdev_disconnect_event(wmi_unified_t wmi_handle,
381 				  uint8_t *event, uint32_t data_len,
382 				  struct vdev_disconnect_event_data *data);
383 
384 /**
385  * wmi_extract_roam_scan_chan_list - Extract roam scan chan list
386  * @wmi_handle: WMI handle
387  * @event: Event data received from firmware
388  * @data_len: Event data length received from firmware
389  * @data: Extract the event and fill in data
390  *
391  * Return: QDF_STATUS
392  */
393 QDF_STATUS
394 wmi_extract_roam_scan_chan_list(wmi_unified_t wmi_handle,
395 				uint8_t *event, uint32_t data_len,
396 				struct cm_roam_scan_ch_resp **data);
397 
398 /**
399  * wmi_unified_extract_roam_btm_response() - Extract BTM response
400  * @wmi:       wmi handle
401  * @evt_buf:   Pointer to the event buffer
402  * @dst:       Pointer to destination structure to fill data
403  * @idx:       TLV id
404  *
405  * Return: QDF_STATUS
406  */
407 QDF_STATUS
408 wmi_unified_extract_roam_btm_response(wmi_unified_t wmi, void *evt_buf,
409 				      struct roam_btm_response_data *dst,
410 				      uint8_t idx);
411 
412 /**
413  * wmi_unified_extract_roam_initial_info() - Extract initial info
414  * @wmi:       wmi handle
415  * @evt_buf:   Pointer to the event buffer
416  * @dst:       Pointer to destination structure to fill data
417  * @idx:       TLV id
418  *
419  * Return: QDF_STATUS
420  */
421 QDF_STATUS
422 wmi_unified_extract_roam_initial_info(wmi_unified_t wmi, void *evt_buf,
423 				      struct roam_initial_data *dst,
424 				      uint8_t idx);
425 
426 /**
427  * wmi_unified_extract_roam_msg_info() - Extract roam msg info
428  * @wmi:       wmi handle
429  * @evt_buf:   Pointer to the event buffer
430  * @dst:       Pointer to destination structure to fill data
431  * @idx:       TLV id
432  *
433  * Return: QDF_STATUS
434  */
435 QDF_STATUS
436 wmi_unified_extract_roam_msg_info(wmi_unified_t wmi, void *evt_buf,
437 				  struct roam_msg_info *dst, uint8_t idx);
438 
439 /**
440  * wmi_extract_roam_stats_event  - Extract roam stats event
441  * @wmi_handle: WMI handle
442  * @event: Event data received from firmware
443  * @data_len: Event data length received from firmware
444  * @stats_info: Extract the event and fill in stats_info
445  *
446  * Return: QDF_STATUS
447  */
448 QDF_STATUS
449 wmi_extract_roam_stats_event(wmi_unified_t wmi_handle,
450 			     uint8_t *event, uint32_t data_len,
451 			     struct roam_stats_event **stats_info);
452 
453 /**
454  * wmi_unified_extract_roam_extract_frame_info() - Extract the roam frame
455  * info TLV from roam stats event
456  * @wmi:        wmi handle
457  * @evt_buf:    Pointer to the event buffer
458  * @dst:        Pointer to destination structure to fill data
459  * @idx:        Index of the TLV to read
460  * @num_frames: Number of TLV to read
461  *
462  * Return: QDF_STATUS
463  */
464 QDF_STATUS
465 wmi_unified_extract_roam_extract_frame_info(wmi_unified_t wmi, void *evt_buf,
466 					    struct roam_frame_stats *dst,
467 					    uint8_t idx, uint8_t num_frames);
468 
469 /**
470  * wmi_extract_auth_offload_event  - Extract auth offload event
471  * @wmi_handle: WMI handle
472  * @event: Event data received from firmware
473  * @data_len: Event data length received from firmware
474  * @auth_event: Extract the event and fill in auth_event
475  *
476  * Return: QDF_STATUS
477  */
478 QDF_STATUS
479 wmi_extract_auth_offload_event(wmi_unified_t wmi_handle,
480 			       uint8_t *event, uint32_t data_len,
481 			       struct auth_offload_event *auth_event);
482 
483 /**
484  * wmi_extract_roam_pmkid_request - Extract roam pmkid list
485  * @wmi_handle: WMI handle
486  * @event: Event data received from firmware
487  * @data_len: Event data length received from firmware
488  * @data: Extract the event and fill in data
489  *
490  * Return: QDF_STATUS
491  */
492 QDF_STATUS
493 wmi_extract_roam_pmkid_request(wmi_unified_t wmi_handle,
494 			       uint8_t *event, uint32_t data_len,
495 			       struct roam_pmkid_req_event **data);
496 
497 /**
498  * wmi_extract_roam_candidate_frame_event() - Extract the roam candidate
499  * scan entry and update the scan db
500  * @wmi_handle: wmi handle
501  * @event: Event data received from firmware
502  * @len: Event data length received from firmware
503  * @data: Extract the event and fill in data
504  */
505 QDF_STATUS
506 wmi_extract_roam_candidate_frame_event(wmi_unified_t wmi_handle, uint8_t *event,
507 				       uint32_t len,
508 				       struct roam_scan_candidate_frame *data);
509 #endif /* WLAN_FEATURE_ROAM_OFFLOAD */
510 
511 #ifdef WLAN_FEATURE_11BE_MLO
512 QDF_STATUS
513 wmi_unified_roam_mlo_config_cmd(wmi_unified_t wmi_handle,
514 				struct wlan_roam_mlo_config *req);
515 #else
516 static inline QDF_STATUS
wmi_unified_roam_mlo_config_cmd(wmi_unified_t wmi_handle,struct wlan_roam_mlo_config * req)517 wmi_unified_roam_mlo_config_cmd(wmi_unified_t wmi_handle,
518 				struct wlan_roam_mlo_config *req)
519 {
520 	return QDF_STATUS_SUCCESS;
521 }
522 #endif
523 
524 /**
525  * wmi_unified_roam_scan_offload_mode_cmd() - set roam scan parameters
526  * @wmi_handle: wmi handle
527  * @rso_cfg: roam scan offload parameters
528  *
529  * This function reads the incoming @rso_cfg and fill in the destination
530  * WMI structure and send down the roam scan configs down to the firmware
531  *
532  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
533  */
534 QDF_STATUS wmi_unified_roam_scan_offload_mode_cmd(
535 			wmi_unified_t wmi_handle,
536 			struct wlan_roam_scan_offload_params *rso_cfg);
537 
538 /**
539  * wmi_unified_send_roam_scan_offload_ap_cmd() - set roam ap profile in fw
540  * @wmi_handle: wmi handle
541  * @ap_profile: ap profile params
542  *
543  * Send WMI_ROAM_AP_PROFILE to firmware
544  *
545  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
546  */
547 QDF_STATUS wmi_unified_send_roam_scan_offload_ap_cmd(
548 				wmi_unified_t wmi_handle,
549 				struct ap_profile_params *ap_profile);
550 
551 /**
552  * wmi_unified_roam_scan_offload_cmd() - set roam offload command
553  * @wmi_handle: wmi handle
554  * @command: command
555  * @vdev_id: vdev id
556  *
557  * This function set roam offload command to fw.
558  *
559  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
560  */
561 QDF_STATUS wmi_unified_roam_scan_offload_cmd(wmi_unified_t wmi_handle,
562 					     uint32_t command,
563 					     uint32_t vdev_id);
564 
565 /**
566  * wmi_unified_roam_scan_offload_chan_list_cmd  - Roam scan offload channel
567  * list command
568  * @wmi_handle: wmi handle
569  * @rso_ch_info: roam scan offload channel info
570  *
571  * Return: QDF_STATUS
572  */
573 QDF_STATUS
574 wmi_unified_roam_scan_offload_chan_list_cmd(wmi_unified_t wmi_handle,
575 			struct wlan_roam_scan_channel_list *rso_ch_info);
576 
577 /**
578  * wmi_unified_roam_scan_offload_rssi_change_cmd() - set roam offload RSSI
579  * threshold
580  * @wmi_handle: wmi handle
581  * @params: RSSI change params
582  *
583  * Send WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD parameters to fw.
584  *
585  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
586  */
587 QDF_STATUS
588 wmi_unified_roam_scan_offload_rssi_change_cmd(
589 		wmi_unified_t wmi_handle,
590 		struct wlan_roam_rssi_change_params *params);
591 
592 /**
593  * wmi_unified_set_per_roam_config() - set PER roam config in FW
594  * @wmi_handle: wmi handle
595  * @req_buf: per roam config request buffer
596  *
597  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
598  */
599 QDF_STATUS
600 wmi_unified_set_per_roam_config(wmi_unified_t wmi_handle,
601 				struct wlan_per_roam_config_req *req_buf);
602 
603 /**
604  * wmi_unified_send_limit_off_chan_cmd() - send wmi cmd of limit off channel
605  * configuration params
606  * @wmi_handle:  wmi handler
607  * @wmi_param: pointer to wmi_limit_off_chan_param
608  *
609  * Return: QDF_STATUS_SUCCESS on success and QDF failure reason code on failure
610  */
611 QDF_STATUS wmi_unified_send_limit_off_chan_cmd(
612 		wmi_unified_t wmi_handle,
613 		struct wmi_limit_off_chan_param *wmi_param);
614 
615 #ifdef WLAN_FEATURE_FILS_SK
616 /*
617  * wmi_unified_roam_send_hlp_cmd() -send HLP command info
618  * @wmi_handle: wma handle
619  * @req_buf: Pointer to HLP params
620  *
621  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
622  */
623 QDF_STATUS wmi_unified_roam_send_hlp_cmd(wmi_unified_t wmi_handle,
624 					 struct hlp_params *req_buf);
625 #endif /* WLAN_FEATURE_FILS_SK */
626 
627 /**
628  * wmi_unified_send_btm_config() - Send BTM config to fw
629  * @wmi_handle:  wmi handle
630  * @params: pointer to wlan_roam_btm_config
631  *
632  * Return: QDF_STATUS
633  */
634 QDF_STATUS wmi_unified_send_btm_config(wmi_unified_t wmi_handle,
635 				       struct wlan_roam_btm_config *params);
636 
637 /**
638  * wmi_unified_send_bss_load_config() - Send bss load trigger params to fw
639  * @wmi_handle:  wmi handle
640  * @params: pointer to wlan_roam_bss_load_config
641  *
642  * Return: QDF_STATUS
643  */
644 QDF_STATUS wmi_unified_send_bss_load_config(
645 				wmi_unified_t wmi_handle,
646 				struct wlan_roam_bss_load_config *params);
647 
648 /**
649  * wmi_unified_offload_11k_cmd() - send 11k offload command
650  * @wmi_handle: wmi handle
651  * @params: 11k offload params
652  *
653  * This function passes the 11k offload command params to FW
654  *
655  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
656  */
657 QDF_STATUS
658 wmi_unified_offload_11k_cmd(wmi_unified_t wmi_handle,
659 			    struct wlan_roam_11k_offload_params *params);
660 /**
661  * wmi_unified_invoke_neighbor_report_cmd() - send invoke neighbor report cmd
662  * @wmi_handle: wmi handle
663  * @params: invoke neighbor report params
664  *
665  * This function passes the invoke neighbor report command to fw
666  *
667  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
668  */
669 QDF_STATUS wmi_unified_invoke_neighbor_report_cmd(
670 			wmi_unified_t wmi_handle,
671 			struct wmi_invoke_neighbor_report_params *params);
672 
673 /**
674  * wmi_unified_get_roam_scan_ch_list() - send roam scan channel list get cmd
675  * @wmi_handle: wmi handle
676  * @vdev_id: vdev id
677  *
678  * This function sends roam scan channel list get command to firmware.
679  *
680  * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure
681  */
682 QDF_STATUS wmi_unified_get_roam_scan_ch_list(wmi_unified_t wmi_handle,
683 					     uint8_t vdev_id);
684 
685 #endif /* _WMI_UNIFIED_ROAM_API_H_ */
686