xref: /wlan-driver/qcacld-3.0/configs/genoa.common (revision 5113495b16420b49004c444715d2daae2066e7dc)
1# Protocol specific features
2
3#features not required for GENOA IOT, compilation errors are there.
4CONFIG_TX_AGGREGATION_SIZE_ENABLE := y
5CONFIG_SUPPORT_11AX := y
6CONFIG_160MHZ_SUPPORT := y
7CONFIG_FEATURE_STATS_EXT := n
8CONFIG_FEATURE_WLAN_FT_IEEE8021X := y
9CONFIG_FEATURE_WLAN_FT_PSK := y
10
11#required features
12CONFIG_QCACLD_WLAN_LFR2 := y
13CONFIG_QCACLD_WLAN_LFR3 := n
14CONFIG_QCOM_TDLS := y
15CONFIG_QCACLD_FEATURE_GREEN_AP := n
16CONFIG_QCOM_VOWIFI_11R := y
17CONFIG_WLAN_FEATURE_FILS := y
18CONFIG_QCOM_LTE_COEX := n
19CONFIG_WLAN_FEATURE_LPSS := n
20CONFIG_QCACLD_FEATURE_NAN := y
21CONFIG_POWER_MANAGEMENT_OFFLOAD := y
22CONFIG_LFR_SUBNET_DETECTION := y
23CONFIG_MCC_TO_SCC_SWITCH := y
24CONFIG_QCOM_ESE := n
25CONFIG_WLAN_CONV_SPECTRAL_ENABLE := n
26CONFIG_WLAN_DFS_MASTER_ENABLE := y
27CONFIG_WIFI_POS_CONVERGED := y
28CONFIG_WIFI_POS_LEGACY := n
29CONFIG_FEATURE_WLAN_WAPI := y
30CONFIG_AGEIE_ON_SCAN_RESULTS := y
31CONFIG_WLAN_PMO_ENABLE := y
32CONFIG_CONVERGED_P2P_ENABLE := y
33CONFIG_WLAN_POLICY_MGR_ENABLE := y
34CONFIG_HDD_INIT_WITH_RTNL_LOCK := y
35CONFIG_WLAN_FEATURE_TWT := n
36CONFIG_WMI_CMD_STRINGS := y
37CONFIG_SOFTAP_CHANNEL_RANGE := y
38CONFIG_FEATURE_WLAN_SCAN_PNO := y
39CONFIG_WLAN_FEATURE_DSRC := n
40CONFIG_FEATURE_MONITOR_MODE_SUPPORT := n
41CONFIG_DP_TRACE := y
42CONFIG_QCACLD_FEATURE_METERING := n
43
44#Flag to enable Dynamic Voltage WDCVS (Config Voltage Mode)
45CONFIG_WLAN_DYNAMIC_CVM := n
46
47#We might need to disable WEXT support in perf builds in future
48ifeq ($(CONFIG_WIRELESS_EXT), y)
49CONFIG_WLAN_WEXT_SUPPORT_ENABLE := y
50endif
51CONFIG_HOST_11D_SCAN := y
52
53#Flag to enable/disable Avoid acs freq feature
54CONFIG_SAP_AVOID_ACS_FREQ_LIST := n
55
56ifeq ($(CONFIG_ARCH_MSM8996), y)
57CONFIG_CHANNEL_HOPPING_ALL_BANDS := y
58endif
59
60# Debug specific features
61CONFIG_WLAN_LOGGING_BUFFERS_DYNAMICALLY := y
62CONFIG_WLAN_DEBUG_VERSION := y
63CONFIG_WLAN_DIAG_VERSION := n
64
65CONFIG_REMOVE_PKT_LOG := y
66CONFIG_FEATURE_HTC_CREDIT_HISTORY := y
67CONFIG_TRACE_RECORD_FEATURE := y
68CONFIG_WLAN_NUD_TRACKING := n
69CONFIG_CP_STATS := y
70CONFIG_QCA_TARGET_IF_MLME := y
71CONFIG_FEATURE_FW_LOG_PARSING := y
72CONFIG_PTT_SOCK_SVC_ENABLE := y
73CONFIG_WMI_INTERFACE_EVENT_LOGGING := y
74CONFIG_FEATURE_ROAM_DEBUG := y
75
76CONFIG_WLAN_LOG_FATAL := y
77CONFIG_WLAN_LOG_ERROR := y
78CONFIG_WLAN_LOG_WARN := y
79CONFIG_WLAN_LOG_INFO := y
80CONFIG_WLAN_LOG_DEBUG := y
81
82ifeq ($(CONFIG_REMOVE_PKT_LOG), y)
83CONFIG_WDI_EVENT_ENABLE := n
84else
85CONFIG_WDI_EVENT_ENABLE := y
86endif
87
88ifeq ($(CONFIG_REMOVE_PKT_LOG), n)
89CONFIG_PKTLOG_LEGACY := y
90endif
91
92#Enable the type_specific_data in the ath_pktlog_arg
93ifeq ($(CONFIG_REMOVE_PKT_LOG), n)
94CONFIG_PKTLOG_HAS_SPECIFIC_DATA := y
95endif
96
97ifeq ($(CONFIG_SLUB_DEBUG), y)
98        PANIC_ON_BUG := y
99        WLAN_WARN_ON_ASSERT := y
100else ifeq ($(CONFIG_PERF_DEBUG), y)
101        PANIC_ON_BUG := y
102        WLAN_WARN_ON_ASSERT := y
103else
104        PANIC_ON_BUG := n
105        WLAN_WARN_ON_ASSERT := n
106endif
107
108CONFIG_WLAN_LOGGING_SOCK_SVC := y
109
110#Flag to enable wbuff feature
111CONFIG_WLAN_WBUFF := n
112
113# other features
114WLAN_OPEN_SOURCE := y
115CONFIG_ATH_PERF_PWR_OFFLOAD := y
116CONFIG_ATH_BUS_PM := n
117CONFIG_ATH_SUPPORT_FLOWMAC_MODULE := n
118CONFIG_ATH_SUPPORT_SPECTRAL := n
119CONFIG_LITTLE_ENDIAN := y
120CONFIG_ATH_PCIE_ACCESS_DEBUG := n
121CONFIG_QCA_SIGNED_SPLIT_BINARY_SUPPORT := n
122CONFIG_QCA_SINGLE_BINARY_SUPPORT := n
123CONFIG_TARGET_RAMDUMP_AFTER_KERNEL_PANIC := y
124CONFIG_FEATURE_SECURE_FIRMWARE := n
125CONFIG_WLAN_FEATURE_PACKET_FILTERING := y
126CONFIG_WLAN_NS_OFFLOAD := y
127CONFIG_FEATURE_WLAN_RA_FILTERING:= y
128ifeq ($(CONFIG_POWER_MANAGEMENT_OFFLOAD), y)
129CONFIG_FEATURE_WLAN_LPHB := y
130endif
131CONFIG_FEATURE_WLAN_EXTSCAN := n
132CONFIG_REG_CLIENT := y
133CONFIG_WLAN_OFFLOAD_PACKETS := y
134CONFIG_WLAN_SYNC_TSF := y
135CONFIG_WLAN_FEATURE_DISA := n
136CONFIG_WLAN_FEATURE_FIPS := y
137CONFIG_WLAN_FEATURE_SAE := y
138CONFIG_CHNL_MATRIX_RESTRICTION := n
139CONFIG_WLAN_ALLOCATE_GLOBAL_BUFFERS_DYNAMICALLY := y
140CONFIG_WLAN_FEATURE_BMI := n
141# Enable FW stats version 2
142CONFIG_AR900B := y
143
144#Flags to enable/disable vendor commands
145CONFIG_FEATURE_RSSI_MONITOR := n
146CONFIG_FEATURE_BSS_TRANSITION := n
147CONFIG_FEATURE_STATION_INFO := y
148CONFIG_FEATURE_TX_POWER := n
149CONFIG_FEATURE_OTA_TEST := n
150CONFIG_FEATURE_ACTIVE_TOS := n
151CONFIG_FEATURE_SAR_LIMITS := y
152CONFIG_FEATURE_CONCURRENCY_MATRIX := n
153CONFIG_FEATURE_SAP_COND_CHAN_SWITCH := n
154CONFIG_FEATURE_P2P_LISTEN_OFFLOAD := n
155
156#Flags to enable/disable WMI APIs
157CONFIG_WMI_ROAM_SUPPORT := y
158CONFIG_WMI_CONCURRENCY_SUPPORT := y
159CONFIG_WMI_STA_SUPPORT := y
160
161ifeq ($(CONFIG_ARCH_SDM845), y)
162ifeq ($(CONFIG_IPA_OFFLOAD), y)
163CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
164endif
165endif
166
167#Data Path specific features
168CONFIG_TX_CREDIT_RECLAIM_SUPPORT := n
169CONFIG_CHECKSUM_OFFLOAD := y
170CONFIG_QCA_SUPPORT_TX_THROTTLE := y
171
172ifeq ($(CONFIG_POWER_MANAGEMENT_OFFLOAD), y)
173CONFIG_GTK_OFFLOAD := y
174endif
175CONFIG_QCACLD_FEATURE_APF := y
176
177#Flag to enable SARv1 -> SARv2 conversion
178CONFIG_WLAN_FEATURE_SARV1_TO_SARV2 := n
179
180ifneq ($(DEVELOPER_DISABLE_BUILD_TIMESTAMP), y)
181ifneq ($(WLAN_DISABLE_BUILD_TAG), y)
182CONFIG_BUILD_TAG := y
183endif
184endif
185
186# Use static allocation for DFS
187CONFIG_WLAN_DFS_STATIC_MEM_ALLOC := y
188
189# WoW filer configs
190CONFIG_CFG_PMO_WOW_FILTERS_MAX := 16
191
192# Offload configs
193CONFIG_CFG_GTK_OFFLOAD_MAX_VDEV := 2
194CONFIG_CFG_ROAM_OFFLOAD_MAX_VDEV := 1
195
196# Max Periodic Tx Pattern Config
197CONFIG_CFG_MAX_PERIODIC_TX_PTRNS := 3
198
199# Max Sta Vdev Config
200CONFIG_CFG_MAX_STA_VDEVS := 2
201
202# Additional peers sent to firmware
203CONFIG_CFG_NUM_OF_ADDITIONAL_FW_PEERS := 0
204
205# Number of TDLS peers that each Tdls vdev can track
206CONFIG_CFG_NUM_OF_TDLS_CONN_TABLE_ENTRIES := 4
207
208# Number of vdevs supported at one time, used for allocating memory
209CONFIG_WLAN_MAX_VDEVS := 3
210
211#Number of STA sessions max connected to our SAP, used for allocating memory
212#should never be less then number of max peers - INI
213CONFIG_SIR_SAP_MAX_NUM_PEERS := 10
214
215#Max no of offloaded beaconing entities supported
216CONFIG_BEACON_TX_OFFLOAD_MAX_VDEV := 3
217
218#Beacon offload config
219CONFIG_WMI_BCN_OFFLOAD := y
220
221#Flag to enable Supported Operating class
222CONFIG_HOST_OPCLASS := y
223
224#Enable STATE MACHINE HISTORY
225CONFIG_SM_ENG_HIST := n
226
227ifeq (y,$(findstring y,$(CONFIG_ARCH_MSM) $(CONFIG_ARCH_QCOM) $(CONFIG_QCA_SUPPORT_TXRX_DRIVER_TCP_DEL_ACK)))
228CONFIG_WLAN_FEATURE_DP_BUS_BANDWIDTH := y
229endif
230
231CONFIG_SAP_DHCP_FW_IND := n
232
233#Enable FW Offload
234CONFIG_WLAN_FW_OFFLOAD := y
235
236#Enable PCIe Shadow Register
237CONFIG_QCN7605_PCIE_SHADOW_REG_SUPPORT := y
238
239ifeq (y, $(filter y, $(CONFIG_ARCH_SDXPRAIRIE) $(CONFIG_ARCH_SA515) $(CONFIG_ARCH_SDXPOORWILLS) $(CONFIG_ARCH_SA515M)))
240CONFIG_MOBILE_ROUTER := y
241endif
242
243# enable/disable feature flags based upon mobile router profile
244ifeq ($(CONFIG_MOBILE_ROUTER), y)
245CONFIG_FEATURE_WLAN_MCC_TO_SCC_SWITCH := y
246CONFIG_FEATURE_WLAN_AUTO_SHUTDOWN := y
247CONFIG_FEATURE_WLAN_AP_AP_ACS_OPTIMIZE := y
248CONFIG_FEATURE_WLAN_STA_4ADDR_SCHEME := y
249CONFIG_MDM_PLATFORM := y
250CONFIG_FEATURE_WLAN_STA_AP_MODE_DFS_DISABLE := y
251CONFIG_FEATURE_AP_MCC_CH_AVOIDANCE := y
252CONFIG_WLAN_OPEN_P2P_INTERFACE := n
253CONFIG_WLAN_ENABLE_SOCIAL_CHANNELS_5G_ONLY := n
254else
255CONFIG_WLAN_OPEN_P2P_INTERFACE := y
256CONFIG_WLAN_ENABLE_SOCIAL_CHANNELS_5G_ONLY := y
257endif
258
259CONFIG_WLAN_SYSFS_MEM_STATS := y
260###################################
261