1ifeq ($(CONFIG_CNSS_QCA6290), y) 2 ifeq ($(CONFIG_CNSS_EMULATION), y) 3 CONFIG_QCA_WIFI_NAPIER_EMULATION := y 4 endif 5 CONFIG_LITHIUM := y 6 CONFIG_QCA6290_11AX := y 7 CONFIG_WLAN_FEATURE_11AX := y 8 CONFIG_WLAN_FEATURE_DFS_OFFLOAD := y 9 CONFIG_IPA3 := n 10endif 11 12ifeq ($(CONFIG_CNSS_QCA6390), y) 13 ifeq ($(CONFIG_CNSS_EMULATION), y) 14 CONFIG_QCA_WIFI_NAPIER_EMULATION := y 15 endif 16 CONFIG_LITHIUM := y 17 CONFIG_WLAN_FEATURE_11AX := y 18 CONFIG_WLAN_FEATURE_DFS_OFFLOAD := y 19 ifeq ($(CONFIG_ARCH_SDM845), y) 20 CONFIG_IPA3 := n 21 endif 22 CONFIG_SCALE_INCLUDES := y 23 CONFIG_HASTINGS_BT_WAR := y 24 CONFIG_WDI3_IPA_OVER_GSI :=y 25 CONFIG_DIRECT_BUF_RX_ENABLE := y 26 CONFIG_WMI_DBR_SUPPORT := y 27 CONFIG_MORE_TX_DESC := y 28 CONFIG_FIX_TXDMA_ALIGNMENT := y 29endif 30 31ifeq ($(CONFIG_CNSS_QCA6490), y) 32 CONFIG_DIRECT_BUF_RX_ENABLE := y 33 CONFIG_WMI_DBR_SUPPORT := y 34 CONFIG_WLAN_CFR_ENABLE := y 35 CONFIG_WLAN_ENH_CFR_ENABLE := y 36 ifeq ($(CONFIG_CNSS_EMULATION), y) 37 CONFIG_QCA_WIFI_NAPIER_EMULATION := y 38 endif 39 CONFIG_LITHIUM := y 40 CONFIG_WLAN_FEATURE_11AX := y 41 CONFIG_WLAN_FEATURE_DFS_OFFLOAD := y 42 ifeq ($(CONFIG_ARCH_SDM845), y) 43 CONFIG_IPA3 := n 44 endif 45 CONFIG_SCALE_INCLUDES := y 46 CONFIG_HASTINGS_BT_WAR := y 47 CONFIG_WDI3_IPA_OVER_GSI :=y 48 CONFIG_GENERIC_SHADOW_REGISTER_ACCESS_ENABLE :=y 49endif 50 51ifeq ($(CONFIG_CNSS_QCA6750), y) 52 ifeq ($(CONFIG_CNSS_EMULATION), y) 53 CONFIG_QCA_WIFI_NAPIER_EMULATION := y 54 endif 55 CONFIG_LITHIUM := y 56 CONFIG_WLAN_FEATURE_11AX := y 57 CONFIG_WLAN_FEATURE_DFS_OFFLOAD := y 58 ifeq ($(CONFIG_ARCH_SDM845), y) 59 CONFIG_IPA3 := n 60 endif 61 CONFIG_SCALE_INCLUDES := y 62 CONFIG_HASTINGS_BT_WAR := y 63 CONFIG_WDI3_IPA_OVER_GSI :=y 64endif 65 66ifeq ($(CONFIG_CLD_HL_SDIO_CORE), y) 67 CONFIG_QCA_WIFI_SDIO := y 68ifndef CONFIG_SDIO_TRANSFER 69 CONFIG_SDIO_TRANSFER = mailbox 70endif 71endif 72 73ifeq ($(CONFIG_QCA_WIFI_SDIO), y) 74 CONFIG_ROME_IF = sdio 75endif 76 77ifeq ($(CONFIG_CNSS_UTILS), m) 78 CONFIG_CNSS_UTILS_MODULE := y 79endif 80ifeq ($(CONFIG_WCNSS_MEM_PRE_ALLOC), m) 81 CONFIG_WCNSS_MEM_PRE_ALLOC_MODULE := y 82endif 83 84ifdef CONFIG_ICNSS 85 CONFIG_ROME_IF = snoc 86endif 87 88ifdef CONFIG_ICNSS2 89 CONFIG_ROME_IF = ipci 90endif 91 92ifeq (y,$(findstring y,$(CONFIG_CNSS) $(CONFIG_CNSS2))) 93ifndef CONFIG_ROME_IF 94 #use pci as default interface 95 CONFIG_ROME_IF = pci 96endif 97endif 98 99ifeq (m,$(findstring m,$(CONFIG_CNSS2))) 100ifndef CONFIG_ROME_IF 101 #use pci as default interface 102 CONFIG_ROME_IF = pci 103endif 104endif 105 106# Make WLAN as open-source driver by default 107WLAN_OPEN_SOURCE := y 108 109ifeq ($(CONFIG_ICNSS), y) 110 CONFIG_HELIUMPLUS := y 111 CONFIG_64BIT_PADDR := y 112 CONFIG_FEATURE_TSO := y 113 CONFIG_FEATURE_TSO_DEBUG := y 114 ifeq ($(CONFIG_INET_LRO), y) 115 CONFIG_WLAN_LRO := y 116 else 117 CONFIG_WLAN_LRO := n 118 endif 119endif 120 121ifneq ($(DEVELOPER_DISABLE_BUILD_TIMESTAMP), y) 122ifneq ($(WLAN_DISABLE_BUILD_TAG), y) 123CONFIG_BUILD_TAG := y 124endif 125endif 126 127ifeq ($(CONFIG_ARCH_MDM9630), y) 128CONFIG_MOBILE_ROUTER := y 129endif 130 131ifeq ($(CONFIG_ARCH_MDM9640), y) 132CONFIG_MOBILE_ROUTER := y 133endif 134 135ifeq ($(CONFIG_ARCH_SDX20), y) 136CONFIG_MOBILE_ROUTER := y 137endif 138 139ifeq ($(CONFIG_ARCH_SDXPRAIRIE), y) 140CONFIG_MOBILE_ROUTER := y 141endif 142 143ifeq ($(CONFIG_ARCH_MSM8917), y) 144 ifeq ($(CONFIG_ROME_IF), sdio) 145 CONFIG_WLAN_SYNC_TSF_PLUS := y 146 endif 147endif 148 149ifeq (y,$(findstring y,$(CONFIG_ARCH_QCS405) $(CONFIG_ARCH_QCS403))) 150 CONFIG_ARCH_QCS40X := y 151endif 152 153ifeq ($(CONFIG_ARCH_QCS40X), y) 154 CONFIG_WLAN_SYNC_TSF_PLUS := y 155 CONFIG_WLAN_SYNC_TSF_PLUS_NOIRQ := y 156 CONFIG_RX_PERFORMANCE := y 157 CONFIG_TGT_NUM_MSDU_DESC := 900 158 CONFIG_MULTI_IF_LOG := y 159 CONFIG_DFS_PRI_MULTIPLIER := y 160 CONFIG_DFS_OVERRIDE_RF_THRESHOLD := y 161endif 162CONFIG_WLAN_FEATURE_MBSSID := y 163 164#Flag to enable Legacy Fast Roaming3(LFR3) 165ifeq (y,$(findstring y,$(CONFIG_HELIUMPLUS) $(CONFIG_LITHIUM))) 166 CONFIG_QCACLD_WLAN_LFR3 := y 167else 168 CONFIG_QCACLD_WLAN_LFR2 := y 169endif 170 171ifneq ($(CONFIG_MOBILE_ROUTER), y) 172#Flag to enable TDLS feature 173CONFIG_QCOM_TDLS := y 174 175CONFIG_WLAN_SYSFS := y 176CONFIG_WLAN_POWER_DEBUG := y 177#Enable Beacon Reception Stats 178CONFIG_FEATURE_BECN_STATS := y 179endif 180 181#Disable the Export Symbol config 182CONFIG_WLAN_DISABLE_EXPORT_SYMBOL := y 183 184CONFIG_QCACLD_FEATURE_GREEN_AP := y 185#Flag to enable Android Packet Filtering 186CONFIG_QCACLD_FEATURE_APF := y 187 188#Flag to enable SARv1 -> SARv2 conversion 189CONFIG_WLAN_FEATURE_SARV1_TO_SARV2 := n 190 191#Flag to enable get firmware state 192CONFIG_QCACLD_FEATURE_FW_STATE := y 193 194#Flag to enable set coex configuration 195CONFIG_QCACLD_FEATURE_COEX_CONFIG := n 196 197#Flag to enable get hw capability 198ifeq ($(CONFIG_ARCH_QCS40X), y) 199CONFIG_QCACLD_FEATURE_HW_CAPABILITY := y 200endif 201 202ifeq ($(CONFIG_ARCH_MSM8998), y) 203CONFIG_QCACLD_FEATURE_METERING := y 204endif 205 206ifeq ($(CONFIG_ARCH_SDM845), y) 207CONFIG_QCACLD_FEATURE_METERING := y 208endif 209 210ifeq ($(CONFIG_ARCH_SM8150), y) 211CONFIG_QCACLD_FEATURE_METERING := y 212endif 213 214ifeq ($(CONFIG_HELIUMPLUS), y) 215CONFIG_QCACLD_FEATURE_METERING := y 216endif 217 218ifeq ($(CONFIG_ARCH_KONA), y) 219CONFIG_QCACLD_FEATURE_METERING := y 220CONFIG_WDI3_STATS_UPDATE := y 221CONFIG_WLAN_SYNC_TSF_TIMER := y 222endif 223 224#Flag to enable Fast Transition (11r) feature 225CONFIG_QCOM_VOWIFI_11R := y 226 227#Flag to enable disable ACTION OUI feature 228CONFIG_WLAN_FEATURE_ACTION_OUI := y 229 230#Flag to enable Adaptive 11r feature 231CONFIG_ADAPTIVE_11R := y 232 233#Flag to enable sae single pmk feature 234CONFIG_SAE_SINGLE_PMK := y 235 236#Flag to enable FILS Feature (11ai) 237CONFIG_WLAN_FEATURE_FILS := y 238ifneq ($(CONFIG_QCA_CLD_WLAN),) 239 ifeq (y,$(findstring y,$(CONFIG_CNSS) $(CONFIG_CNSS2) $(CONFIG_ICNSS)$(CONFIG_ICNSS2))) 240 #Flag to enable LTE CoEx feature 241 CONFIG_QCOM_LTE_COEX := y 242 ifneq ($(CONFIG_MOBILE_ROUTER), y) 243 #Flag to enable LPSS feature 244 CONFIG_WLAN_FEATURE_LPSS := y 245 endif 246 endif 247 248 ifeq (m,$(findstring m,$(CONFIG_CNSS2) $(CONFIG_ICNSS2))) 249 #Flag to enable LTE CoEx feature 250 CONFIG_QCOM_LTE_COEX := y 251 ifneq ($(CONFIG_MOBILE_ROUTER), y) 252 #Flag to enable LPSS feature 253 CONFIG_WLAN_FEATURE_LPSS := y 254 endif 255 endif 256endif 257 258#Flag to enable the tx desc sanity check 259ifeq ($(CONFIG_ROME_IF),usb) 260 CONFIG_QCA_TXDESC_SANITY_CHECKS := y 261endif 262 263ifneq ($(CONFIG_MOBILE_ROUTER), y) 264 #Flag to enable NAN 265 CONFIG_QCACLD_FEATURE_NAN := y 266endif 267 268#Flag to enable Linux QCMBR feature as default feature 269ifeq ($(CONFIG_ROME_IF),usb) 270 CONFIG_LINUX_QCMBR :=y 271endif 272 273 274CONFIG_FEATURE_EPPING := y 275 276#Flag to enable offload packets feature 277CONFIG_WLAN_OFFLOAD_PACKETS := y 278 279#enable TSF get feature 280CONFIG_WLAN_SYNC_TSF := y 281#Enable DSRC feature 282ifeq ($(CONFIG_QCA_WIFI_SDIO), y) 283CONFIG_WLAN_FEATURE_DSRC := y 284endif 285 286ifneq ($(CONFIG_ROME_IF),usb) 287 #Flag to enable SAE 288 CONFIG_WLAN_FEATURE_SAE := y 289 290ifneq ($(CONFIG_ROME_IF),sdio) 291 #Flag to enable DISA 292 CONFIG_WLAN_FEATURE_DISA := y 293 294 #Flag to enable FIPS 295 CONFIG_WLAN_FEATURE_FIPS := y 296 297 #Flag to enable Fast Path feature 298 ifneq ($(CONFIG_LITHIUM), y) 299 CONFIG_WLAN_FASTPATH := y 300 endif 301 302 # Flag to enable NAPI 303 CONFIG_WLAN_NAPI := y 304 CONFIG_WLAN_NAPI_DEBUG := n 305 306 # Flag to enable FW based TX Flow control 307 ifeq ($(CONFIG_LITHIUM), y) 308 CONFIG_WLAN_TX_FLOW_CONTROL_V2 := y 309 else 310 CONFIG_WLAN_TX_FLOW_CONTROL_V2 := n 311 endif 312 313endif 314endif 315 316CONFIG_POWER_MANAGEMENT_OFFLOAD := y 317 318ifeq ($(CONFIG_ROME_IF), snoc) 319 CONFIG_WLAN_TX_FLOW_CONTROL_V2 := y 320endif 321 322ifeq ($(CONFIG_ARCH_QCS40X), y) 323CONFIG_WLAN_TX_FLOW_CONTROL_V2 := n 324# Flag to improve TCP TX throughput for both 325# CONFIG_WLAN_TX_FLOW_CONTROL_LEGACY and CONFIG_WLAN_TX_FLOW_CONTROL_V2 326# disabled platform, avoid frame drop in driver 327CONFIG_WLAN_PDEV_TX_FLOW_CONTROL := y 328endif 329 330# Flag to enable LFR Subnet Detection 331CONFIG_LFR_SUBNET_DETECTION := y 332 333# Flag to enable MCC to SCC switch feature 334CONFIG_MCC_TO_SCC_SWITCH := y 335 336ifeq ($(CONFIG_SLUB_DEBUG), y) 337 # Enable Obj Mgr Degug services if slub build 338 CONFIG_WLAN_OBJMGR_DEBUG:= y 339 CONFIG_LOCK_STATS_ON:= y 340endif 341 342ifeq (y,$(findstring y,$(CONFIG_QCA_WIFI_SDIO) $(CONFIG_HIF_USB))) 343CONFIG_HL_DP_SUPPORT := y 344else 345CONFIG_LL_DP_SUPPORT := y 346endif 347 348ifeq ($(CONFIG_ROME_IF),pci) 349ifneq ($(CONFIG_WLAN_TX_FLOW_CONTROL_V2), y) 350ifneq ($(CONFIG_LITHIUM), y) 351CONFIG_WLAN_TX_FLOW_CONTROL_LEGACY := y 352endif 353endif 354endif 355 356#Whether have QMI support 357CONFIG_QMI_SUPPORT := y 358 359ifeq ($(CONFIG_ICNSS), y) 360CONFIG_WIFI_3_0_ADRASTEA := y 361CONFIG_ADRASTEA_RRI_ON_DDR := y 362# Enable athdiag procfs debug support for adrastea 363CONFIG_ATH_PROCFS_DIAG_SUPPORT := y 364# Enable 11AC TX compact feature for adrastea 365CONFIG_ATH_11AC_TXCOMPACT := y 366ifeq ($(CONFIG_QMI_SUPPORT), y) 367CONFIG_ADRASTEA_SHADOW_REGISTERS := y 368endif 369endif 370 371# Enable fw stats version 2 372ifeq (y,$(findstring y,$(CONFIG_HELIUMPLUS) $(CONFIG_LITHIUM))) 373CONFIG_AR900B := y 374endif 375 376# NOTE: CONFIG_64BIT_PADDR requires CONFIG_HELIUMPLUS 377ifeq ($(CONFIG_HELIUMPLUS), y) 378 379ifeq ($(CONFIG_64BIT_PADDR), y) 380CONFIG_HTT_PADDR64 := y 381endif 382 383ifeq ($(CONFIG_SLUB_DEBUG_ON), y) 384CONFIG_OL_RX_INDICATION_RECORD := y 385CONFIG_TSOSEG_DEBUG := y 386CONFIG_HIF_LARGE_CE_RING_HISTORY := 8192 387endif 388 389endif #CONFIG_HELIUMPLUS 390 391ifeq ($(CONFIG_LITHIUM), y) 392CONFIG_RX_DEFRAG_DO_NOT_REINJECT := y 393# 394# Enable Shadow V2 for all lithium platform 395# 396CONFIG_SHADOW_V2 := y 397 398ifeq ($(CONFIG_CNSS_QCA6290), y) 399 CONFIG_QCA6290_HEADERS_DEF := y 400 CONFIG_QCA_WIFI_QCA6290 := y 401endif 402ifeq ($(CONFIG_CNSS_QCA6390), y) 403 CONFIG_QCA6390_HEADERS_DEF := y 404 CONFIG_QCA_WIFI_QCA6390 := y 405endif 406 407ifeq ($(CONFIG_CNSS_QCA6490), y) 408 CONFIG_QCA6490_HEADERS_DEF := y 409 CONFIG_QCA_WIFI_QCA6490 := y 410endif 411 412ifeq ($(CONFIG_CNSS_QCA6750), y) 413 CONFIG_QCA6750_HEADERS_DEF := y 414 CONFIG_QCA_WIFI_QCA6750 := y 415endif 416 417ifeq ($(CONFIG_LITHIUM), y) 418# 419# Enable VERBOSE debug INI mechanism 420# 421CONFIG_VERBOSE_DEBUG := y 422CONFIG_RX_DESC_SANITY_WAR := y 423ifeq ($(CONFIG_PCI_MSM), y) 424 CONFIG_FEATURE_HAL_DELAYED_REG_WRITE := y 425endif 426endif 427 428CONFIG_QCA_WIFI_QCA8074 := y 429CONFIG_QCA_WIFI_QCA8074_VP := y 430CONFIG_DP_INTR_POLL_BASED := y 431CONFIG_TX_PER_PDEV_DESC_POOL := y 432CONFIG_DP_TRACE := y 433CONFIG_FEATURE_TSO := y 434CONFIG_FEATURE_FORCE_WAKE := y 435CONFIG_DP_LFR := y 436CONFIG_DUP_RX_DESC_WAR := y 437CONFIG_HTT_PADDR64 := y 438CONFIG_RX_OL := y 439CONFIG_TX_TID_OVERRIDE := y 440CONFIG_DP_TXRX_SOC_ATTACH := y 441CONFIG_WLAN_CLD_PM_QOS := y 442CONFIG_DISABLE_DP_STATS := n 443CONFIG_MAX_ALLOC_PAGE_SIZE := y 444CONFIG_REO_DESC_DEFER_FREE := y 445CONFIG_RXDMA_ERR_PKT_DROP := y 446CONFIG_DELIVERY_TO_STACK_STATUS_CHECK := y 447 448ifeq ($(CONFIG_FEATURE_TSO), y) 449 CONFIG_FEATURE_TSO_STATS := y 450 CONFIG_TSO_DEBUG_LOG_ENABLE := y 451endif 452 453ifeq ($(CONFIG_DISABLE_DP_STATS), y) 454 CONFIG_FEATURE_TSO_STATS := n 455endif 456endif 457 458# As per target team, build is done as follows: 459# Defconfig : build with default flags 460# Slub : defconfig + CONFIG_SLUB_DEBUG=y + 461# CONFIG_SLUB_DEBUG_ON=y + CONFIG_PAGE_POISONING=y 462# Perf : Using appropriate msmXXXX-perf_defconfig 463# 464# Shipment builds (user variants) should not have any debug feature 465# enabled. This is identified using 'TARGET_BUILD_VARIANT'. Slub builds 466# are identified using the CONFIG_SLUB_DEBUG_ON configuration. Since 467# there is no other way to identify defconfig builds, QCOMs internal 468# representation of perf builds (identified using the string 'perf'), 469# is used to identify if the build is a slub or defconfig one. This 470# way no critical debug feature will be enabled for perf and shipment 471# builds. Other OEMs are also protected using the TARGET_BUILD_VARIANT 472# config. 473ifneq ($(TARGET_BUILD_VARIANT),user) 474 ifeq ($(CONFIG_LITHIUM), y) 475 CONFIG_FEATURE_PKTLOG := n 476 else 477 CONFIG_FEATURE_PKTLOG := y 478 endif 479 CONFIG_WLAN_DEBUG_CRASH_INJECT := y 480endif 481 482#Enable WLAN/Power debugfs feature only if debug_fs is enabled 483ifeq ($(CONFIG_DEBUG_FS), y) 484 # Flag to enable debugfs. Depends on CONFIG_DEBUG_FS in kernel 485 # configuration. 486 CONFIG_WLAN_DEBUGFS := y 487 488 # Flag to enable streamfs. Depends on CONFIG_DEBUG_FS and 489 # CONFIG_RELAY in kernel configuration. 490ifeq ($(CONFIG_RELAY), y) 491 CONFIG_WLAN_STREAMFS := y 492endif 493endif 494 495ifeq ($(CONFIG_WLAN_DEBUGFS), y) 496 CONFIG_WLAN_MWS_INFO_DEBUGFS := y 497 CONFIG_WLAN_FEATURE_MIB_STATS := y 498else 499 CONFIG_WLAN_MWS_INFO_DEBUGFS := n 500 CONFIG_WLAN_FEATURE_MIB_STATS := n 501endif 502 503#Whether to build debug version 504CONFIG_WLAN_DEBUG_VERSION := y 505 506#Enable this flag to build driver in diag version 507CONFIG_WLAN_DIAG_VERSION := y 508 509ifeq ($(CONFIG_SLUB_DEBUG), y) 510 PANIC_ON_BUG := y 511 WLAN_WARN_ON_ASSERT := y 512else ifeq ($(CONFIG_PERF_DEBUG), y) 513 PANIC_ON_BUG := y 514 WLAN_WARN_ON_ASSERT := y 515else 516 PANIC_ON_BUG := n 517 WLAN_WARN_ON_ASSERT := n 518endif 519 520# Compile all log levels by default 521CONFIG_WLAN_LOG_FATAL := y 522CONFIG_WLAN_LOG_ERROR := y 523CONFIG_WLAN_LOG_WARN := y 524CONFIG_WLAN_LOG_INFO := y 525CONFIG_WLAN_LOG_DEBUG := y 526CONFIG_WLAN_LOG_ENTER := y 527CONFIG_WLAN_LOG_EXIT := y 528 529#Enable OL debug and wmi unified functions 530CONFIG_ATH_PERF_PWR_OFFLOAD := y 531 532#Disable packet log 533CONFIG_REMOVE_PKT_LOG := n 534 535#Enable 11AC TX 536ifeq ($(CONFIG_ROME_IF),pci) 537 CONFIG_ATH_11AC_TXCOMPACT := y 538endif 539 540ifeq ($(CONFIG_ROME_IF),ipci) 541 CONFIG_ATH_11AC_TXCOMPACT := y 542endif 543 544ifeq ($(CONFIG_ROME_IF),usb) 545 CONFIG_ATH_11AC_TXCOMPACT := n 546endif 547 548#Enable PCI specific APIS (dma, etc) 549ifeq ($(CONFIG_ROME_IF),pci) 550 CONFIG_HIF_PCI := y 551endif 552 553ifeq ($(CONFIG_ROME_IF),ipci) 554 CONFIG_HIF_IPCI := y 555endif 556 557#Enable USB specific APIS 558ifeq ($(CONFIG_ROME_IF),usb) 559 CONFIG_HIF_USB := y 560endif 561 562#Enable SDIO specific APIS 563ifeq ($(CONFIG_ROME_IF),sdio) 564 CONFIG_HIF_SDIO := y 565 CONFIG_TX_DESC_HI_PRIO_RESERVE := y 566 CONFIG_FEATURE_HL_GROUP_CREDIT_FLOW_CONTROL := y 567 CONFIG_TGT_NUM_MSDU_DESC := 0 568endif 569 570ifeq ($(CONFIG_ROME_IF),snoc) 571 CONFIG_HIF_SNOC:= y 572endif 573 574# enable/disable feature flags based upon mobile router profile 575ifeq ($(CONFIG_MOBILE_ROUTER), y) 576CONFIG_FEATURE_WLAN_MCC_TO_SCC_SWITCH := y 577CONFIG_FEATURE_WLAN_AUTO_SHUTDOWN := y 578CONFIG_FEATURE_WLAN_AP_AP_ACS_OPTIMIZE := y 579CONFIG_FEATURE_WLAN_STA_4ADDR_SCHEME := y 580CONFIG_MDM_PLATFORM := y 581ifneq ($(CONFIG_ARCH_SDXPRAIRIE), y) 582CONFIG_FEATURE_WLAN_STA_AP_MODE_DFS_DISABLE := y 583endif 584CONFIG_FEATURE_AP_MCC_CH_AVOIDANCE := y 585else 586CONFIG_QCOM_ESE := y 587CONFIG_FEATURE_WLAN_RMC := y 588CONFIG_WLAN_OPEN_P2P_INTERFACE := y 589CONFIG_WLAN_ENABLE_SOCIAL_CHANNELS_5G_ONLY := y 590endif 591 592#enable 4addr support for QCS40X 593ifeq ($(CONFIG_ARCH_QCS40X), y) 594CONFIG_FEATURE_WLAN_STA_4ADDR_SCHEME := y 595endif 596 597#Enable power management suspend/resume functionality to PCI 598CONFIG_ATH_BUS_PM := y 599 600#Enable FLOWMAC module support 601CONFIG_ATH_SUPPORT_FLOWMAC_MODULE := n 602 603#Enable spectral support 604CONFIG_ATH_SUPPORT_SPECTRAL := n 605 606#Define the legacy pktlog 607ifeq ($(CONFIG_REMOVE_PKT_LOG), n) 608ifeq ($(CONFIG_HELIUMPLUS), y) 609CONFIG_PKTLOG_LEGACY := y 610endif 611 612#Customize DSCP_to-UP map based on RFC8325 613ifeq ($(CONFIG_HELIUMPLUS), y) 614CONFIG_WLAN_CUSTOM_DSCP_UP_MAP := y 615CONFIG_WLAN_SEND_DSCP_UP_MAP_TO_FW := y 616endif 617ifeq ($(CONFIG_LITHIUM), y) 618CONFIG_WLAN_CUSTOM_DSCP_UP_MAP := y 619endif 620 621ifeq ($(CONFIG_ARCH_BENGAL), y) 622CONFIG_SMMU_S1_UNMAP := y 623endif 624 625ifeq ($(CONFIG_ROME_IF), sdio) 626CONFIG_PKTLOG_LEGACY := y 627endif 628 629ifeq ($(CONFIG_ROME_IF), pci) 630CONFIG_PKTLOG_LEGACY := y 631endif 632 633ifeq ($(CONFIG_ROME_IF), usb) 634CONFIG_PKTLOG_LEGACY := y 635endif 636 637ifeq ($(CONFIG_ROME_IF), snoc) 638CONFIG_PKTLOG_LEGACY := y 639endif 640endif 641 642ifeq ($(CONFIG_LITHIUM), y) 643CONFIG_PKTLOG_LEGACY := n 644endif 645 646ifeq ($(CONFIG_LITHIUM), y) 647CONFIG_WAPI_BIG_ENDIAN := y 648else 649CONFIG_WAPI_BIG_ENDIAN := n 650endif 651 652#Enable WDI Event support 653ifeq ($(CONFIG_REMOVE_PKT_LOG), y) 654CONFIG_WDI_EVENT_ENABLE := n 655else 656CONFIG_WDI_EVENT_ENABLE := y 657endif 658 659#Enable the type_specific_data in the ath_pktlog_arg 660ifeq ($(CONFIG_REMOVE_PKT_LOG), n) 661ifeq ($(CONFIG_LITHIUM), y) 662CONFIG_PKTLOG_HAS_SPECIFIC_DATA := y 663endif 664 665ifeq ($(CONFIG_HELIUMPLUS), y) 666CONFIG_PKTLOG_HAS_SPECIFIC_DATA := y 667endif 668endif 669 670#Endianness selection 671CONFIG_LITTLE_ENDIAN := y 672 673#Enable TX reclaim support 674CONFIG_TX_CREDIT_RECLAIM_SUPPORT := n 675 676#Enable FTM support 677CONFIG_QCA_WIFI_FTM := y 678 679ifeq ($(CONFIG_QCA_WIFI_FTM), y) 680 681ifeq ($(CONFIG_NL80211_TESTMODE), y) 682 QCA_WIFI_FTM_NL80211 :=y 683else 684 QCA_WIFI_FTM_NL80211 :=n 685endif 686 CONFIG_LINUX_QCMBR :=y 687 688else 689 QCA_WIFI_FTM_NL80211 :=n 690 CONFIG_LINUX_QCMBR :=n 691endif 692 693 694#Enable Checksum Offload 695CONFIG_CHECKSUM_OFFLOAD := y 696 697#Enable GTK offload 698CONFIG_GTK_OFFLOAD := y 699 700#Enable EXT WOW 701ifeq ($(CONFIG_HIF_PCI), y) 702 CONFIG_EXT_WOW := y 703endif 704 705#Set this to 1 to catch erroneous Target accesses during debug. 706CONFIG_ATH_PCIE_ACCESS_DEBUG := n 707 708#Enable IPA offload 709ifeq ($(CONFIG_IPA), y) 710CONFIG_IPA_OFFLOAD := n 711endif 712ifeq ($(CONFIG_IPA3), y) 713CONFIG_IPA_OFFLOAD := n 714endif 715 716#Flag to enable SMMU S1 support 717ifeq ($(CONFIG_ARCH_SDM845), y) 718ifeq ($(CONFIG_IPA_OFFLOAD), y) 719CONFIG_ENABLE_SMMU_S1_TRANSLATION := y 720endif 721endif 722 723ifeq ($(CONFIG_ARCH_SM8150), y) 724ifeq ($(CONFIG_IPA_OFFLOAD), y) 725ifneq ($(CONFIG_LITHIUM), y) 726CONFIG_ENABLE_SMMU_S1_TRANSLATION := y 727endif 728endif 729endif 730 731ifeq ($(CONFIG_ARCH_SDXPRAIRIE), y) 732ifeq ($(CONFIG_IPA_OFFLOAD), y) 733CONFIG_ENABLE_SMMU_S1_TRANSLATION := y 734endif 735endif 736 737ifeq ($(CONFIG_ARCH_KONA), y) 738ifeq ($(CONFIG_IPA_OFFLOAD), y) 739CONFIG_ENABLE_SMMU_S1_TRANSLATION := y 740CONFIG_SMMU_S1_UNMAP := y 741endif 742endif 743 744ifeq ($(CONFIG_HELIUMPLUS), y) 745ifneq ($(CONFIG_ARCH_SDM630), y) 746ifneq ($(CONFIG_ARCH_SDM660), y) 747ifneq ($(CONFIG_ARCH_MSM8998), y) 748ifeq ($(CONFIG_IPA_OFFLOAD), y) 749CONFIG_ENABLE_SMMU_S1_TRANSLATION := y 750endif 751endif 752endif 753endif 754endif 755 756ifeq ($(CONFIG_ARCH_SDX20), y) 757ifeq ($(CONFIG_QCA_WIFI_SDIO), y) 758ifeq ($(CONFIG_WCNSS_SKB_PRE_ALLOC), y) 759CONFIG_FEATURE_SKB_PRE_ALLOC := y 760endif 761endif 762endif 763 764#Enable Signed firmware support for split binary format 765CONFIG_QCA_SIGNED_SPLIT_BINARY_SUPPORT := n 766 767#Enable single firmware binary format 768CONFIG_QCA_SINGLE_BINARY_SUPPORT := n 769 770#Enable collecting target RAM dump after kernel panic 771CONFIG_TARGET_RAMDUMP_AFTER_KERNEL_PANIC := y 772 773#Flag to enable/disable secure firmware feature 774CONFIG_FEATURE_SECURE_FIRMWARE := n 775 776#Flag to enable Stats Ext implementation 777CONFIG_FEATURE_STATS_EXT := y 778 779#Flag to allocate memory dynamically for different buffers 780CONFIG_WLAN_LOGGING_BUFFERS_DYNAMICALLY := n 781CONFIG_WLAN_DFS_STATIC_MEM_ALLOC := y 782 783#Flag to enable HTC credit history feature 784CONFIG_FEATURE_HTC_CREDIT_HISTORY := y 785 786#Flag to enable MTRACE feature 787CONFIG_TRACE_RECORD_FEATURE := y 788 789#Flag to enable p2p debug feature 790CONFIG_WLAN_FEATURE_P2P_DEBUG := y 791 792#Flag to enable roam debug log 793CONFIG_FEATURE_ROAM_DEBUG := y 794 795#Flag to enable DFS Master feature 796CONFIG_WLAN_DFS_MASTER_ENABLE := y 797 798#Flag to enable WEXT support for STA/AP/P2P interfaces 799CONFIG_WLAN_WEXT_SUPPORT_ENABLE := y 800 801#Flag to enable/disable MTRACE feature 802CONFIG_ENABLE_MTRACE_LOG := y 803 804#Flag to enable nud tracking feature 805CONFIG_WLAN_NUD_TRACKING := y 806 807#Flag to enable wbuff feature 808CONFIG_WLAN_WBUFF := y 809 810#Flag to enable set and get disable channel list feature 811CONFIG_DISABLE_CHANNEL_LIST :=y 812 813#Flag to enable beacon receive feature 814CONFIG_WLAN_BCN_RECV_FEATURE := y 815 816#Flag to enable LTE COEX feature 817CONFIG_LTE_COEX := y 818 819#Flag to enable/disable TARGET 11d scan 820CONFIG_TARGET_11D_SCAN := y 821 822#Flag to enable/disable Avoid acs freq feature 823CONFIG_SAP_AVOID_ACS_FREQ_LIST := y 824 825#Flag to enable HOST OPCLASS feature 826CONFIG_HOST_OPCLASS := y 827 828#Flag to enable Dynamic Voltage WDCVS (Config Voltage Mode) 829CONFIG_WLAN_DYNAMIC_CVM := y 830 831#Flag to enable SAR Safety Feature 832CONFIG_SAR_SAFETY_FEATURE := y 833 834CONFIG_WIFI_POS_CONVERGED := y 835ifneq ($(CONFIG_WIFI_POS_CONVERGED), y) 836CONFIG_WIFI_POS_LEGACY := y 837endif 838 839CONFIG_CP_STATS := y 840CONFIG_QCA_TARGET_IF_MLME := y 841CONFIG_FEATURE_INTEROP_ISSUES_AP := y 842 843CONFIG_FEATURE_WLAN_WAPI := y 844 845CONFIG_AGEIE_ON_SCAN_RESULTS := y 846 847#Flag to enable FW log parsing support feature 848CONFIG_FEATURE_FW_LOG_PARSING := y 849 850CONFIG_PTT_SOCK_SVC_ENABLE := y 851CONFIG_SOFTAP_CHANNEL_RANGE := y 852CONFIG_FEATURE_WLAN_SCAN_PNO := y 853CONFIG_WLAN_FEATURE_PACKET_FILTERING := y 854CONFIG_WLAN_NS_OFFLOAD := y 855CONFIG_FEATURE_WLAN_RA_FILTERING:= y 856CONFIG_FEATURE_WLAN_LPHB := y 857CONFIG_QCA_SUPPORT_TX_THROTTLE := y 858CONFIG_WMI_INTERFACE_EVENT_LOGGING := y 859CONFIG_WLAN_FEATURE_LINK_LAYER_STATS := y 860CONFIG_FEATURE_WLAN_EXTSCAN := n 861CONFIG_WMI_BCN_OFFLOAD := y 862CONFIG_160MHZ_SUPPORT := y 863CONFIG_REG_CLIENT := y 864CONFIG_WLAN_PMO_ENABLE := y 865CONFIG_CONVERGED_P2P_ENABLE := y 866CONFIG_WLAN_POLICY_MGR_ENABLE := y 867CONFIG_FEATURE_DENYLIST_MGR := y 868CONFIG_FOURTH_CONNECTION := y 869CONFIG_SUPPORT_11AX := y 870CONFIG_HDD_INIT_WITH_RTNL_LOCK := y 871CONFIG_WLAN_CONV_SPECTRAL_ENABLE := y 872CONFIG_WLAN_SPECTRAL_ENABLE := y 873CONFIG_WMI_CMD_STRINGS := y 874CONFIG_FEATURE_MONITOR_MODE_SUPPORT := y 875CONFIG_WLAN_ALLOCATE_GLOBAL_BUFFERS_DYNAMICALLY := n 876CONFIG_WLAN_FEATURE_TWT := y 877CONFIG_FW_THERMAL_THROTTLE := y 878 879ifeq (y,$(findstring y,$(CONFIG_LITHIUM) $(CONFIG_ICNSS))) 880CONFIG_WLAN_FEATURE_BMI := n 881else 882CONFIG_WLAN_FEATURE_BMI := y 883endif 884 885#Flags to enable/disable vendor commands 886CONFIG_FEATURE_RSSI_MONITOR := y 887CONFIG_FEATURE_BSS_TRANSITION := y 888CONFIG_FEATURE_STATION_INFO := y 889CONFIG_FEATURE_TX_POWER := y 890CONFIG_FEATURE_OTA_TEST := y 891CONFIG_FEATURE_ACTIVE_TOS := y 892CONFIG_FEATURE_SAR_LIMITS := y 893CONFIG_FEATURE_CONCURRENCY_MATRIX := y 894CONFIG_FEATURE_SAP_COND_CHAN_SWITCH := y 895CONFIG_FEATURE_P2P_LISTEN_OFFLOAD := y 896CONFIG_QCACLD_FEATURE_MPTA_HELPER := n 897CONFIG_QCACLD_RX_DESC_MULTI_PAGE_ALLOC := y 898 899#Flags to enable/disable WMI APIs 900CONFIG_WMI_ROAM_SUPPORT := y 901CONFIG_WMI_CONCURRENCY_SUPPORT := y 902CONFIG_WMI_STA_SUPPORT := y 903 904CONFIG_DP_TRACE := y 905 906ifeq ($(CONFIG_HELIUMPLUS), y) 907ifneq ($(CONFIG_FORCE_ALLOC_FROM_DMA_ZONE), y) 908CONFIG_ENABLE_DEBUG_ADDRESS_MARKING := y 909endif 910CONFIG_RX_OL := y 911endif 912 913ifeq ($(CONFIG_SLUB_DEBUG_ON), y) 914 CONFIG_DSC_DEBUG := y 915 CONFIG_DESC_TIMESTAMP_DEBUG_INFO := y 916 CONFIG_FEATURE_UNIT_TEST_SUSPEND := y 917 CONFIG_LEAK_DETECTION := y 918 CONFIG_MAX_LOGS_PER_SEC := 500 919 CONFIG_SCHED_HISTORY_SIZE := 256 920 CONFIG_TALLOC_DEBUG := y 921 CONFIG_UNIT_TEST := y 922 CONFIG_REGISTER_OP_DEBUG := y 923 CONFIG_ENABLE_QDF_PTR_HASH_DEBUG := y 924endif 925 926ifeq ($(CONFIG_UNIT_TEST), y) 927 CONFIG_DSC_TEST := y 928 CONFIG_QDF_TEST := y 929 CONFIG_FEATURE_WLM_STATS := y 930endif 931 932ifeq ($(CONFIG_LITHIUM), y) 933 ifeq ($(CONFIG_SLUB_DEBUG_ON), y) 934 CONFIG_WLAN_FEATURE_DP_EVENT_HISTORY := y 935 CONFIG_HIF_CE_DEBUG_DATA_BUF := y 936 CONFIG_WLAN_RECORD_RX_PADDR := y 937 CONFIG_HIF_CPU_PERF_AFFINE_MASK := y 938 CONFIG_WLAN_FEATURE_DP_RX_RING_HISTORY := y 939 CONFIG_ALLOW_PKT_DROPPING := y 940 endif 941 CONFIG_DYNAMIC_RX_AGGREGATION := y 942 CONFIG_RX_DESC_DEBUG_CHECK:= y 943 CONFIG_WLAN_SUPPORT_DATA_STALL := y 944 CONFIG_WLAN_DP_PER_RING_TYPE_CONFIG := y 945 CONFIG_WLAN_CE_INTERRUPT_THRESHOLD_CONFIG := y 946 #Enable WMI TX/RX over QMI 947 CONFIG_WMI_SEND_RECV_QMI := y 948 CONFIG_WLAN_DP_PENDING_MEM_FLUSH := y 949endif 950 951#Flag to enable hdd memory dump feature 952CONFIG_FEATURE_MEMDUMP_ENABLE := y 953 954#Flag to enable/disable WLAN D0-WOW 955ifeq ($(CONFIG_PCI_MSM), y) 956ifeq ($(CONFIG_HIF_PCI), y) 957CONFIG_FEATURE_WLAN_D0WOW := y 958endif 959endif 960 961ifeq ($(CONFIG_ARCH_MDM9607), y) 962CONFIG_TUFELLO_DUAL_FW_SUPPORT := y 963endif 964 965ifeq ($(CONFIG_ARCH_MSM8996), y) 966CONFIG_CHANNEL_HOPPING_ALL_BANDS := y 967endif 968 969ifeq ($(CONFIG_ARCH_SDXPRAIRIE), y) 970 ifneq ($(CONFIG_SLUB_DEBUG), y) 971 CONFIG_DP_TRACE := n 972 endif 973 974 CONFIG_DIRECT_BUF_RX_ENABLE := n 975 CONFIG_WMI_DBR_SUPPORT := n 976endif 977 978ifneq ($(CONFIG_HIF_USB), y) 979CONFIG_WLAN_LOGGING_SOCK_SVC := y 980endif 981 982ifneq ($(TARGET_BUILD_VARIANT),user) 983CONFIG_DESC_DUP_DETECT_DEBUG := y 984CONFIG_DEBUG_RX_RING_BUFFER := y 985endif 986 987ifeq ($(CONFIG_CNSS), y) 988ifeq ($(CONFIG_CNSS_SDIO), y) 989CONFIG_PLD_SDIO_CNSS_FLAG := y 990endif 991ifeq ($(CONFIG_HIF_PCI), y) 992CONFIG_PLD_PCIE_CNSS_FLAG := y 993endif 994endif 995 996ifeq ($(CONFIG_ICNSS2), y) 997CONFIG_PLD_IPCI_ICNSS_FLAG := y 998endif 999 1000ifeq ($(CONFIG_CNSS2), y) 1001ifeq ($(CONFIG_HIF_PCI), y) 1002CONFIG_PLD_PCIE_CNSS_FLAG := y 1003CONFIG_PLD_PCIE_INIT_FLAG := y 1004endif 1005endif 1006 1007ifeq ($(CONFIG_CNSS2), m) 1008ifeq ($(CONFIG_HIF_PCI), y) 1009CONFIG_PLD_PCIE_CNSS_FLAG := y 1010CONFIG_PLD_PCIE_INIT_FLAG := y 1011endif 1012endif 1013 1014#Enable STATE MACHINE HISTORY 1015CONFIG_SM_ENG_HIST := n 1016 1017#Enable OEM DATA feature 1018CONFIG_FEATURE_OEM_DATA := y 1019 1020#Enable FW Offload 1021CONFIG_WLAN_FW_OFFLOAD := y 1022 1023#Enable eLNA bypass feature 1024ifeq ($(CONFIG_WLAN_FW_OFFLOAD), y) 1025CONFIG_WLAN_FEATURE_ELNA := y 1026endif 1027 1028#Enable DP Bus Vote 1029CONFIG_WLAN_FEATURE_DP_BUS_BANDWIDTH := y 1030 1031ifeq ($(CONFIG_CNSS_QCA6490), y) 1032 1033#Enable 6 GHz Band 1034CONFIG_BAND_6GHZ := y 1035CONFIG_RX_FISA := y 1036CONFIG_MORE_TX_DESC := y 1037 1038endif 1039 1040CONFIG_HANDLE_BC_EAP_TX_FRM := y 1041 1042ifeq ($(CONFIG_BAND_6GHZ), y) 1043 1044CONFIG_6G_SCAN_CHAN_SORT_ALGO := y 1045 1046endif 1047 1048CONFIG_SAP_DHCP_FW_IND := y 1049 1050#Enable support to get ANI level 1051CONFIG_ANI_LEVEL_REQUEST := y 1052 1053ifeq ($(CONFIG_ARCH_QCS405), y) 1054CONFIG_FEATURE_WLAN_TIME_SYNC_FTM := y 1055endif 1056 1057CONFIG_WLAN_HANG_EVENT := y 1058 1059#Enable VDEV Response wakelock feature 1060CONFIG_FEATURE_VDEV_RSP_WAKELOCK := y 1061 1062#Enable Low Power Modes: Deep Sleep/Hibernate 1063CONFIG_ENABLE_LOW_POWER_MODE := y 1064